1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include "sm8550.dtsi"
10 #include "pm8010.dtsi"
11 #include "pm8550.dtsi"
12 #include "pm8550b.dtsi"
13 #define PMK8550VE_SID 5
14 #include "pm8550ve.dtsi"
15 #include "pm8550vs.dtsi"
16 #include "pmk8550.dtsi"
17 #include "pmr735d_a.dtsi"
18 #include "pmr735d_b.dtsi"
19
20 / {
21 model = "Qualcomm Technologies, Inc. SM8550 MTP";
22 compatible = "qcom,sm8550-mtp", "qcom,sm8550";
23 chassis-type = "handset";
24
25 aliases {
26 serial0 = &uart7;
27 };
28
29 wcd938x: audio-codec {
30 compatible = "qcom,wcd9385-codec";
31
32 pinctrl-names = "default";
33 pinctrl-0 = <&wcd_default>;
34
35 qcom,micbias1-microvolt = <1800000>;
36 qcom,micbias2-microvolt = <1800000>;
37 qcom,micbias3-microvolt = <1800000>;
38 qcom,micbias4-microvolt = <1800000>;
39 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
40 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
41 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
42 qcom,rx-device = <&wcd_rx>;
43 qcom,tx-device = <&wcd_tx>;
44
45 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
46
47 vdd-buck-supply = <&vreg_l15b_1p8>;
48 vdd-rxtx-supply = <&vreg_l15b_1p8>;
49 vdd-io-supply = <&vreg_l15b_1p8>;
50 vdd-mic-bias-supply = <&vreg_bob1>;
51
52 #sound-dai-cells = <1>;
53 };
54
55 chosen {
56 stdout-path = "serial0:115200n8";
57 };
58
59 pmic-glink {
60 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
61 #address-cells = <1>;
62 #size-cells = <0>;
63 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
64
65 connector@0 {
66 compatible = "usb-c-connector";
67 reg = <0>;
68 power-role = "dual";
69 data-role = "dual";
70
71 ports {
72 #address-cells = <1>;
73 #size-cells = <0>;
74
75 port@0 {
76 reg = <0>;
77
78 pmic_glink_hs_in: endpoint {
79 remote-endpoint = <&usb_1_dwc3_hs>;
80 };
81 };
82
83 port@1 {
84 reg = <1>;
85
86 pmic_glink_ss_in: endpoint {
87 remote-endpoint = <&usb_dp_qmpphy_out>;
88 };
89 };
90
91 port@2 {
92 reg = <2>;
93
94 pmic_glink_sbu: endpoint {
95 remote-endpoint = <&fsa4480_sbu_mux>;
96 };
97 };
98 };
99 };
100 };
101
102 sound {
103 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
104 model = "SM8550-MTP";
105 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
106 "SpkrRight IN", "WSA_SPK2 OUT",
107 "IN1_HPHL", "HPHL_OUT",
108 "IN2_HPHR", "HPHR_OUT",
109 "AMIC1", "MIC BIAS1",
110 "AMIC2", "MIC BIAS2",
111 "AMIC3", "MIC BIAS3",
112 "AMIC4", "MIC BIAS3",
113 "AMIC5", "MIC BIAS4",
114 "VA DMIC0", "MIC BIAS1",
115 "VA DMIC1", "MIC BIAS1",
116 "VA DMIC2", "MIC BIAS3",
117 "TX DMIC0", "MIC BIAS1",
118 "TX DMIC1", "MIC BIAS2",
119 "TX DMIC2", "MIC BIAS3",
120 "TX SWR_INPUT0", "ADC1_OUTPUT",
121 "TX SWR_INPUT1", "ADC2_OUTPUT",
122 "TX SWR_INPUT0", "ADC3_OUTPUT",
123 "TX SWR_INPUT1", "ADC4_OUTPUT";
124
125 wcd-playback-dai-link {
126 link-name = "WCD Playback";
127
128 cpu {
129 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
130 };
131
132 codec {
133 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
134 };
135
136 platform {
137 sound-dai = <&q6apm>;
138 };
139 };
140
141 wcd-capture-dai-link {
142 link-name = "WCD Capture";
143
144 cpu {
145 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
146 };
147
148 codec {
149 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
150 };
151
152 platform {
153 sound-dai = <&q6apm>;
154 };
155 };
156
157 wsa-dai-link {
158 link-name = "WSA Playback";
159
160 cpu {
161 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
162 };
163
164 codec {
165 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
166 };
167
168 platform {
169 sound-dai = <&q6apm>;
170 };
171 };
172
173 va-dai-link {
174 link-name = "VA Capture";
175
176 cpu {
177 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
178 };
179
180 codec {
181 sound-dai = <&lpass_vamacro 0>;
182 };
183
184 platform {
185 sound-dai = <&q6apm>;
186 };
187 };
188 };
189
190 vph_pwr: vph-pwr-regulator {
191 compatible = "regulator-fixed";
192 regulator-name = "vph_pwr";
193 regulator-min-microvolt = <3700000>;
194 regulator-max-microvolt = <3700000>;
195
196 regulator-always-on;
197 regulator-boot-on;
198 };
199 };
200
201 &apps_rsc {
202 regulators-0 {
203 compatible = "qcom,pm8550-rpmh-regulators";
204 qcom,pmic-id = "b";
205
206 vdd-bob1-supply = <&vph_pwr>;
207 vdd-bob2-supply = <&vph_pwr>;
208 vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
209 vdd-l2-l13-l14-supply = <&vreg_bob1>;
210 vdd-l3-supply = <&vreg_s4g_1p3>;
211 vdd-l5-l16-supply = <&vreg_bob1>;
212 vdd-l6-l7-supply = <&vreg_bob1>;
213 vdd-l8-l9-supply = <&vreg_bob1>;
214 vdd-l11-supply = <&vreg_s4g_1p3>;
215 vdd-l12-supply = <&vreg_s6g_1p8>;
216 vdd-l15-supply = <&vreg_s6g_1p8>;
217 vdd-l17-supply = <&vreg_bob2>;
218
219 vreg_bob1: bob1 {
220 regulator-name = "vreg_bob1";
221 regulator-min-microvolt = <3296000>;
222 regulator-max-microvolt = <3960000>;
223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
224 };
225
226 vreg_bob2: bob2 {
227 regulator-name = "vreg_bob2";
228 regulator-min-microvolt = <2720000>;
229 regulator-max-microvolt = <3960000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_l1b_1p8: ldo1 {
234 regulator-name = "vreg_l1b_1p8";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 };
239
240 vreg_l2b_3p0: ldo2 {
241 regulator-name = "vreg_l2b_3p0";
242 regulator-min-microvolt = <3008000>;
243 regulator-max-microvolt = <3008000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 };
246
247 vreg_l5b_3p1: ldo5 {
248 regulator-name = "vreg_l5b_3p1";
249 regulator-min-microvolt = <3104000>;
250 regulator-max-microvolt = <3104000>;
251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
252 };
253
254 vreg_l6b_1p8: ldo6 {
255 regulator-name = "vreg_l6b_1p8";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <3008000>;
258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 };
260
261 vreg_l7b_1p8: ldo7 {
262 regulator-name = "vreg_l7b_1p8";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <3008000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 };
267
268 vreg_l8b_1p8: ldo8 {
269 regulator-name = "vreg_l8b_1p8";
270 regulator-min-microvolt = <1800000>;
271 regulator-max-microvolt = <3008000>;
272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 };
274
275 vreg_l9b_2p9: ldo9 {
276 regulator-name = "vreg_l9b_2p9";
277 regulator-min-microvolt = <2960000>;
278 regulator-max-microvolt = <3008000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 };
281
282 vreg_l11b_1p2: ldo11 {
283 regulator-name = "vreg_l11b_1p2";
284 regulator-min-microvolt = <1200000>;
285 regulator-max-microvolt = <1504000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 };
288
289 vreg_l12b_1p8: ldo12 {
290 regulator-name = "vreg_l12b_1p8";
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <1800000>;
293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 };
295
296 vreg_l13b_3p0: ldo13 {
297 regulator-name = "vreg_l13b_3p0";
298 regulator-min-microvolt = <3000000>;
299 regulator-max-microvolt = <3000000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 };
302
303 vreg_l14b_3p2: ldo14 {
304 regulator-name = "vreg_l14b_3p2";
305 regulator-min-microvolt = <3200000>;
306 regulator-max-microvolt = <3200000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 };
309
310 vreg_l15b_1p8: ldo15 {
311 regulator-name = "vreg_l15b_1p8";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 };
316
317 vreg_l16b_2p8: ldo16 {
318 regulator-name = "vreg_l16b_2p8";
319 regulator-min-microvolt = <2800000>;
320 regulator-max-microvolt = <2800000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 };
323
324 vreg_l17b_2p5: ldo17 {
325 regulator-name = "vreg_l17b_2p5";
326 regulator-min-microvolt = <2504000>;
327 regulator-max-microvolt = <2504000>;
328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 };
330 };
331
332 regulators-1 {
333 compatible = "qcom,pm8550vs-rpmh-regulators";
334 qcom,pmic-id = "c";
335
336 vdd-l3-supply = <&vreg_s4e_0p9>;
337
338 vreg_l3c_0p91: ldo3 {
339 regulator-name = "vreg_l3c_0p9";
340 regulator-min-microvolt = <880000>;
341 regulator-max-microvolt = <912000>;
342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 };
344 };
345
346 regulators-2 {
347 compatible = "qcom,pm8550vs-rpmh-regulators";
348 qcom,pmic-id = "d";
349
350 vdd-l1-supply = <&vreg_s4e_0p9>;
351
352 vreg_l1d_0p88: ldo1 {
353 regulator-name = "vreg_l1d_0p88";
354 regulator-min-microvolt = <880000>;
355 regulator-max-microvolt = <920000>;
356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
357 };
358 };
359
360 regulators-3 {
361 compatible = "qcom,pm8550vs-rpmh-regulators";
362 qcom,pmic-id = "e";
363
364 vdd-l1-supply = <&vreg_s4e_0p9>;
365 vdd-l2-supply = <&vreg_s4e_0p9>;
366 vdd-l3-supply = <&vreg_s4g_1p3>;
367 vdd-s4-supply = <&vph_pwr>;
368 vdd-s5-supply = <&vph_pwr>;
369
370 vreg_s4e_0p9: smps4 {
371 regulator-name = "vreg_s4e_0p9";
372 regulator-min-microvolt = <904000>;
373 regulator-max-microvolt = <984000>;
374 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
375 };
376
377 vreg_s5e_1p1: smps5 {
378 regulator-name = "vreg_s5e_1p1";
379 regulator-min-microvolt = <1080000>;
380 regulator-max-microvolt = <1120000>;
381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
382 };
383
384 vreg_l1e_0p88: ldo1 {
385 regulator-name = "vreg_l1e_0p88";
386 regulator-min-microvolt = <880000>;
387 regulator-max-microvolt = <880000>;
388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
389 };
390
391 vreg_l2e_0p9: ldo2 {
392 regulator-name = "vreg_l2e_0p9";
393 regulator-min-microvolt = <904000>;
394 regulator-max-microvolt = <970000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
396 };
397
398 vreg_l3e_1p2: ldo3 {
399 regulator-name = "vreg_l3e_1p2";
400 regulator-min-microvolt = <1200000>;
401 regulator-max-microvolt = <1200000>;
402 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
403 };
404 };
405
406 regulators-4 {
407 compatible = "qcom,pm8550ve-rpmh-regulators";
408 qcom,pmic-id = "f";
409
410 vdd-l1-supply = <&vreg_s4e_0p9>;
411 vdd-l2-supply = <&vreg_s4e_0p9>;
412 vdd-l3-supply = <&vreg_s4e_0p9>;
413 vdd-s4-supply = <&vph_pwr>;
414
415 vreg_s4f_0p5: smps4 {
416 regulator-name = "vreg_s4f_0p5";
417 regulator-min-microvolt = <500000>;
418 regulator-max-microvolt = <700000>;
419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 };
421
422 vreg_l1f_0p9: ldo1 {
423 regulator-name = "vreg_l1f_0p9";
424 regulator-min-microvolt = <912000>;
425 regulator-max-microvolt = <912000>;
426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
427 };
428
429 vreg_l2f_0p88: ldo2 {
430 regulator-name = "vreg_l2f_0p88";
431 regulator-min-microvolt = <880000>;
432 regulator-max-microvolt = <912000>;
433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
434 };
435
436 vreg_l3f_0p91: ldo3 {
437 regulator-name = "vreg_l3f_0p91";
438 regulator-min-microvolt = <880000>;
439 regulator-max-microvolt = <912000>;
440 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
441 };
442 };
443
444 regulators-5 {
445 compatible = "qcom,pm8550vs-rpmh-regulators";
446 qcom,pmic-id = "g";
447
448 vdd-l1-supply = <&vreg_s4g_1p3>;
449 vdd-l2-supply = <&vreg_s4g_1p3>;
450 vdd-l3-supply = <&vreg_s4g_1p3>;
451 vdd-s1-supply = <&vph_pwr>;
452 vdd-s2-supply = <&vph_pwr>;
453 vdd-s3-supply = <&vph_pwr>;
454 vdd-s4-supply = <&vph_pwr>;
455 vdd-s5-supply = <&vph_pwr>;
456 vdd-s6-supply = <&vph_pwr>;
457
458 vreg_s1g_1p2: smps1 {
459 regulator-name = "vreg_s1g_1p2";
460 regulator-min-microvolt = <1200000>;
461 regulator-max-microvolt = <1300000>;
462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
463 };
464
465 vreg_s2g_0p8: smps2 {
466 regulator-name = "vreg_s2g_0p8";
467 regulator-min-microvolt = <800000>;
468 regulator-max-microvolt = <1000000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
470 };
471
472 vreg_s3g_0p7: smps3 {
473 regulator-name = "vreg_s3g_0p7";
474 regulator-min-microvolt = <300000>;
475 regulator-max-microvolt = <1004000>;
476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
477 };
478
479 vreg_s4g_1p3: smps4 {
480 regulator-name = "vreg_s4g_1p3";
481 regulator-min-microvolt = <1200000>;
482 regulator-max-microvolt = <1352000>;
483 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
484 };
485
486 vreg_s5g_0p8: smps5 {
487 regulator-name = "vreg_s5g_0p8";
488 regulator-min-microvolt = <500000>;
489 regulator-max-microvolt = <1004000>;
490 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
491 };
492
493 vreg_s6g_1p8: smps6 {
494 regulator-name = "vreg_s6g_1p8";
495 regulator-min-microvolt = <1800000>;
496 regulator-max-microvolt = <2000000>;
497 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
498 };
499
500 vreg_l1g_1p2: ldo1 {
501 regulator-name = "vreg_l1g_1p2";
502 regulator-min-microvolt = <1200000>;
503 regulator-max-microvolt = <1200000>;
504 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
505 };
506
507 vreg_l2g_1p2: ldo2 {
508 regulator-name = "vreg_l2g_1p2";
509 regulator-min-microvolt = <1200000>;
510 regulator-max-microvolt = <1200000>;
511 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
512 };
513
514 vreg_l3g_1p2: ldo3 {
515 regulator-name = "vreg_l3g_1p2";
516 regulator-min-microvolt = <1200000>;
517 regulator-max-microvolt = <1200000>;
518 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
519 };
520 };
521
522 regulators-6 {
523 compatible = "qcom,pm8010-rpmh-regulators";
524 qcom,pmic-id = "m";
525
526 vdd-l1-l2-supply = <&vreg_s4g_1p3>;
527 vdd-l3-l4-supply = <&vreg_bob2>;
528 vdd-l5-supply = <&vreg_s6g_1p8>;
529 vdd-l6-supply = <&vreg_s6g_1p8>;
530 vdd-l7-supply = <&vreg_bob1>;
531
532 vreg_l1m_1p056: ldo1 {
533 regulator-name = "vreg_l1m_1p056";
534 regulator-min-microvolt = <1056000>;
535 regulator-max-microvolt = <1056000>;
536 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
537 };
538
539 vreg_l2m_1p056: ldo2 {
540 regulator-name = "vreg_l2m_1p056";
541 regulator-min-microvolt = <1056000>;
542 regulator-max-microvolt = <1056000>;
543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
544 };
545
546 vreg_l3m_2p8: ldo3 {
547 regulator-name = "vreg_l3m_2p8";
548 regulator-min-microvolt = <2800000>;
549 regulator-max-microvolt = <2800000>;
550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
551 };
552
553 vreg_l4m_2p8: ldo4 {
554 regulator-name = "vreg_l4m_2p8";
555 regulator-min-microvolt = <2800000>;
556 regulator-max-microvolt = <2800000>;
557 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
558 };
559
560 vreg_l5m_1p8: ldo5 {
561 regulator-name = "vreg_l5m_1p8";
562 regulator-min-microvolt = <1800000>;
563 regulator-max-microvolt = <1800000>;
564 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
565 };
566
567 vreg_l6m_1p8: ldo6 {
568 regulator-name = "vreg_l6m_1p8";
569 regulator-min-microvolt = <1800000>;
570 regulator-max-microvolt = <1800000>;
571 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
572 };
573
574 vreg_l7m_2p9: ldo7 {
575 regulator-name = "vreg_l7m_2p9";
576 regulator-min-microvolt = <2800000>;
577 regulator-max-microvolt = <2904000>;
578 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
579 };
580 };
581
582 regulators-7 {
583 compatible = "qcom,pm8010-rpmh-regulators";
584 qcom,pmic-id = "n";
585
586 vdd-l1-l2-supply = <&vreg_s4g_1p3>;
587 vdd-l3-l4-supply = <&vreg_bob2>;
588 vdd-l5-supply = <&vreg_s6g_1p8>;
589 vdd-l6-supply = <&vreg_bob1>;
590 vdd-l7-supply = <&vreg_bob1>;
591
592 vreg_l1n_1p1: ldo1 {
593 regulator-name = "vreg_l1n_1p1";
594 regulator-min-microvolt = <1104000>;
595 regulator-max-microvolt = <1200000>;
596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
597 };
598
599 vreg_l2n_1p1: ldo2 {
600 regulator-name = "vreg_l2n_1p1";
601 regulator-min-microvolt = <1104000>;
602 regulator-max-microvolt = <1200000>;
603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
604 };
605
606 vreg_l3n_2p8: ldo3 {
607 regulator-name = "vreg_l3n_2p8";
608 regulator-min-microvolt = <2800000>;
609 regulator-max-microvolt = <3000000>;
610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
611 };
612
613 vreg_l4n_2p8: ldo4 {
614 regulator-name = "vreg_l4n_2p8";
615 regulator-min-microvolt = <2800000>;
616 regulator-max-microvolt = <3300000>;
617 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
618 };
619
620 vreg_l5n_1p8: ldo5 {
621 regulator-name = "vreg_l5n_1p8";
622 regulator-min-microvolt = <1800000>;
623 regulator-max-microvolt = <1800000>;
624 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
625 };
626
627 vreg_l6n_3p3: ldo6 {
628 regulator-name = "vreg_l6n_3p3";
629 regulator-min-microvolt = <2800000>;
630 regulator-max-microvolt = <3304000>;
631 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
632 };
633
634 vreg_l7n_2p96: ldo7 {
635 regulator-name = "vreg_l7n_2p96";
636 regulator-min-microvolt = <2800000>;
637 regulator-max-microvolt = <2960000>;
638 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
639 };
640 };
641 };
642
643 &gpu {
644 status = "okay";
645
646 zap-shader {
647 firmware-name = "qcom/sm8550/a740_zap.mbn";
648 };
649 };
650
651 &i2c_master_hub_0 {
652 status = "okay";
653 };
654
655 &i2c_hub_2 {
656 status = "okay";
657
658 typec-mux@42 {
659 compatible = "fcs,fsa4480";
660 reg = <0x42>;
661
662 vcc-supply = <&vreg_bob1>;
663
664 mode-switch;
665 orientation-switch;
666
667 port {
668 fsa4480_sbu_mux: endpoint {
669 remote-endpoint = <&pmic_glink_sbu>;
670 };
671 };
672 };
673 };
674
675 &lpass_tlmm {
676 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
677 pins = "gpio17";
678 function = "gpio";
679 drive-strength = <16>;
680 bias-disable;
681 output-low;
682 };
683
684 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
685 pins = "gpio18";
686 function = "gpio";
687 drive-strength = <16>;
688 bias-disable;
689 output-low;
690 };
691 };
692
693 &mdss {
694 status = "okay";
695 };
696
697 &mdss_dsi0 {
698 vdda-supply = <&vreg_l3e_1p2>;
699 status = "okay";
700
701 panel@0 {
702 compatible = "visionox,vtdr6130";
703 reg = <0>;
704
705 pinctrl-names = "default", "sleep";
706 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
707 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
708
709 vddio-supply = <&vreg_l12b_1p8>;
710 vci-supply = <&vreg_l13b_3p0>;
711 vdd-supply = <&vreg_l11b_1p2>;
712
713 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
714
715 port {
716 panel0_in: endpoint {
717 remote-endpoint = <&mdss_dsi0_out>;
718 };
719 };
720 };
721 };
722
723 &mdss_dsi0_out {
724 remote-endpoint = <&panel0_in>;
725 data-lanes = <0 1 2 3>;
726 };
727
728 &mdss_dsi0_phy {
729 vdds-supply = <&vreg_l1e_0p88>;
730 status = "okay";
731 };
732
733 &mdss_dp0 {
734 status = "okay";
735 };
736
737 &mdss_dp0_out {
738 data-lanes = <0 1>;
739 };
740
741 &pcie0 {
742 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
743 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
744
745 pinctrl-names = "default";
746 pinctrl-0 = <&pcie0_default_state>;
747
748 status = "okay";
749 };
750
751 &pcie0_phy {
752 vdda-phy-supply = <&vreg_l1e_0p88>;
753 vdda-pll-supply = <&vreg_l3e_1p2>;
754
755 status = "okay";
756 };
757
758 &pcie1 {
759 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
760 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
761
762 pinctrl-names = "default";
763 pinctrl-0 = <&pcie1_default_state>;
764
765 status = "okay";
766 };
767
768 &pcie1_phy {
769 vdda-phy-supply = <&vreg_l3c_0p91>;
770 vdda-pll-supply = <&vreg_l3e_1p2>;
771 vdda-qref-supply = <&vreg_l1e_0p88>;
772
773 status = "okay";
774 };
775
776 &pm8550_gpios {
777 sdc2_card_det_n: sdc2-card-det-state {
778 pins = "gpio12";
779 function = "normal";
780 input-enable;
781 output-disable;
782 bias-pull-up;
783 power-source = <1>; /* 1.8 V */
784 };
785 };
786
787 &pm8550b_eusb2_repeater {
788 vdd18-supply = <&vreg_l15b_1p8>;
789 vdd3-supply = <&vreg_l5b_3p1>;
790 };
791
792 &qupv3_id_0 {
793 status = "okay";
794 };
795
796 &remoteproc_adsp {
797 firmware-name = "qcom/sm8550/adsp.mbn",
798 "qcom/sm8550/adsp_dtb.mbn";
799 status = "okay";
800 };
801
802 &remoteproc_cdsp {
803 firmware-name = "qcom/sm8550/cdsp.mbn",
804 "qcom/sm8550/cdsp_dtb.mbn";
805 status = "okay";
806 };
807
808 &remoteproc_mpss {
809 firmware-name = "qcom/sm8550/modem.mbn",
810 "qcom/sm8550/modem_dtb.mbn";
811 status = "okay";
812 };
813
814 &sdhc_2 {
815 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
816 pinctrl-names = "default", "sleep";
817 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
818 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
819 vmmc-supply = <&vreg_l9b_2p9>;
820 vqmmc-supply = <&vreg_l8b_1p8>;
821 bus-width = <4>;
822 no-sdio;
823 no-mmc;
824 status = "okay";
825 };
826
827 &sleep_clk {
828 clock-frequency = <32000>;
829 };
830
831 &swr0 {
832 status = "okay";
833
834 /* WSA8845 */
835 left_spkr: speaker@0,0 {
836 compatible = "sdw20217020400";
837 reg = <0 0>;
838 pinctrl-names = "default";
839 pinctrl-0 = <&spkr_1_sd_n_active>;
840 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
841 #sound-dai-cells = <0>;
842 sound-name-prefix = "SpkrLeft";
843 vdd-1p8-supply = <&vreg_l15b_1p8>;
844 vdd-io-supply = <&vreg_l3g_1p2>;
845 qcom,port-mapping = <1 2 3 7 10 13>;
846 };
847
848 /* WSA8845 */
849 right_spkr: speaker@0,1 {
850 compatible = "sdw20217020400";
851 reg = <0 1>;
852 pinctrl-names = "default";
853 pinctrl-0 = <&spkr_2_sd_n_active>;
854 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
855 #sound-dai-cells = <0>;
856 sound-name-prefix = "SpkrRight";
857 vdd-1p8-supply = <&vreg_l15b_1p8>;
858 vdd-io-supply = <&vreg_l3g_1p2>;
859 qcom,port-mapping = <4 5 6 7 11 13>;
860 };
861 };
862
863 &swr1 {
864 status = "okay";
865
866 /* WCD9385 RX */
867 wcd_rx: codec@0,4 {
868 compatible = "sdw20217010d00";
869 reg = <0 4>;
870 qcom,rx-port-mapping = <1 2 3 4 5>;
871 };
872 };
873
874 &swr2 {
875 status = "okay";
876
877 /* WCD9385 TX */
878 wcd_tx: codec@0,3 {
879 compatible = "sdw20217010d00";
880 reg = <0 3>;
881 qcom,tx-port-mapping = <2 2 3 4>;
882 };
883 };
884
885 &tlmm {
886 gpio-reserved-ranges = <32 8>;
887
888 sde_dsi_active: sde-dsi-active-state {
889 pins = "gpio133";
890 function = "gpio";
891 drive-strength = <8>;
892 bias-disable;
893 };
894
895 sde_dsi_suspend: sde-dsi-suspend-state {
896 pins = "gpio133";
897 function = "gpio";
898 drive-strength = <2>;
899 bias-pull-down;
900 };
901
902 sde_te_active: sde-te-active-state {
903 pins = "gpio86";
904 function = "mdp_vsync";
905 drive-strength = <2>;
906 bias-pull-down;
907 };
908
909 sde_te_suspend: sde-te-suspend-state {
910 pins = "gpio86";
911 function = "mdp_vsync";
912 drive-strength = <2>;
913 bias-pull-down;
914 };
915
916 wcd_default: wcd-reset-n-active-state {
917 pins = "gpio108";
918 function = "gpio";
919 drive-strength = <16>;
920 bias-disable;
921 output-low;
922 };
923 };
924
925 &uart7 {
926 status = "okay";
927 };
928
929 &ufs_mem_hc {
930 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
931 vcc-supply = <&vreg_l17b_2p5>;
932 vcc-max-microamp = <1300000>;
933 vccq-supply = <&vreg_l1g_1p2>;
934 vccq-max-microamp = <1200000>;
935 vdd-hba-supply = <&vreg_l3g_1p2>;
936
937 status = "okay";
938 };
939
940 &ufs_mem_phy {
941 vdda-phy-supply = <&vreg_l1d_0p88>;
942 vdda-pll-supply = <&vreg_l3e_1p2>;
943
944 status = "okay";
945 };
946
947 &usb_1 {
948 status = "okay";
949 };
950
951 &usb_1_dwc3_hs {
952 remote-endpoint = <&pmic_glink_hs_in>;
953 };
954
955 &usb_1_hsphy {
956 vdd-supply = <&vreg_l1e_0p88>;
957 vdda12-supply = <&vreg_l3e_1p2>;
958
959 phys = <&pm8550b_eusb2_repeater>;
960
961 status = "okay";
962 };
963
964 &usb_dp_qmpphy {
965 vdda-phy-supply = <&vreg_l3e_1p2>;
966 vdda-pll-supply = <&vreg_l3f_0p91>;
967
968 status = "okay";
969 };
970
971 &usb_dp_qmpphy_out {
972 remote-endpoint = <&pmic_glink_ss_in>;
973 };
974
975 &xo_board {
976 clock-frequency = <76800000>;
977 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.