1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2023, Linaro Limited
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include "sm8650.dtsi"
10 #include "pm8010.dtsi"
11 #include "pm8550.dtsi"
12 #include "pm8550b.dtsi"
13 #define PMK8550VE_SID 8
14 #include "pm8550ve.dtsi"
15 #include "pm8550vs.dtsi"
16 #include "pmk8550.dtsi"
17 #include "pmr735d_a.dtsi"
18
19 / {
20 model = "Qualcomm Technologies, Inc. SM8650 MTP";
21 compatible = "qcom,sm8650-mtp", "qcom,sm8650";
22
23 aliases {
24 serial0 = &uart15;
25 };
26
27 chosen {
28 stdout-path = "serial0:115200n8";
29 };
30
31 pmic-glink {
32 compatible = "qcom,sm8650-pmic-glink",
33 "qcom,sm8550-pmic-glink",
34 "qcom,pmic-glink";
35 #address-cells = <1>;
36 #size-cells = <0>;
37 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
38
39 connector@0 {
40 compatible = "usb-c-connector";
41 reg = <0>;
42
43 power-role = "dual";
44 data-role = "dual";
45
46 ports {
47 #address-cells = <1>;
48 #size-cells = <0>;
49
50 port@0 {
51 reg = <0>;
52
53 pmic_glink_hs_in: endpoint {
54 remote-endpoint = <&usb_1_dwc3_hs>;
55 };
56 };
57
58 port@1 {
59 reg = <1>;
60
61 pmic_glink_ss_in: endpoint {
62 remote-endpoint = <&usb_dp_qmpphy_out>;
63 };
64 };
65 };
66 };
67 };
68
69 sound {
70 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
71 model = "SM8650-MTP";
72 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
73 "SpkrRight IN", "WSA_SPK2 OUT";
74
75 wsa-dai-link {
76 link-name = "WSA Playback";
77
78 cpu {
79 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
80 };
81
82 codec {
83 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
84 };
85
86 platform {
87 sound-dai = <&q6apm>;
88 };
89 };
90 };
91
92 vph_pwr: vph-pwr-regulator {
93 compatible = "regulator-fixed";
94
95 regulator-name = "vph_pwr";
96 regulator-min-microvolt = <3700000>;
97 regulator-max-microvolt = <3700000>;
98
99 regulator-always-on;
100 regulator-boot-on;
101 };
102 };
103
104 &apps_rsc {
105 regulators-0 {
106 compatible = "qcom,pm8550-rpmh-regulators";
107
108 vdd-bob1-supply = <&vph_pwr>;
109 vdd-bob2-supply = <&vph_pwr>;
110 vdd-l2-l13-l14-supply = <&vreg_bob1>;
111 vdd-l3-supply = <&vreg_s1c_1p2>;
112 vdd-l5-l16-supply = <&vreg_bob1>;
113 vdd-l6-l7-supply = <&vreg_bob1>;
114 vdd-l8-l9-supply = <&vreg_bob1>;
115 vdd-l11-supply = <&vreg_s1c_1p2>;
116 vdd-l12-supply = <&vreg_s6c_1p8>;
117 vdd-l15-supply = <&vreg_s6c_1p8>;
118 vdd-l17-supply = <&vreg_bob2>;
119
120 qcom,pmic-id = "b";
121
122 vreg_bob1: bob1 {
123 regulator-name = "vreg_bob1";
124 regulator-min-microvolt = <3296000>;
125 regulator-max-microvolt = <3960000>;
126 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
127 };
128
129 vreg_bob2: bob2 {
130 regulator-name = "vreg_bob2";
131 regulator-min-microvolt = <2720000>;
132 regulator-max-microvolt = <3008000>;
133 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
134 };
135
136 vreg_l2b_3p0: ldo2 {
137 regulator-name = "vreg_l2b_3p0";
138 regulator-min-microvolt = <3008000>;
139 regulator-max-microvolt = <3008000>;
140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
141 regulator-allow-set-load;
142 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
143 RPMH_REGULATOR_MODE_HPM>;
144 };
145
146 vreg_l5b_3p1: ldo5 {
147 regulator-name = "vreg_l5b_3p1";
148 regulator-min-microvolt = <3104000>;
149 regulator-max-microvolt = <3104000>;
150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 regulator-allow-set-load;
152 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
153 RPMH_REGULATOR_MODE_HPM>;
154 };
155
156 vreg_l6b_1p8: ldo6 {
157 regulator-name = "vreg_l6b_1p8";
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <3008000>;
160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
161 regulator-allow-set-load;
162 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
163 RPMH_REGULATOR_MODE_HPM>;
164 };
165
166 vreg_l7b_1p8: ldo7 {
167 regulator-name = "vreg_l7b_1p8";
168 regulator-min-microvolt = <1800000>;
169 regulator-max-microvolt = <3008000>;
170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 };
172
173 vreg_l8b_1p8: ldo8 {
174 regulator-name = "vreg_l8b_1p8";
175 regulator-min-microvolt = <1800000>;
176 regulator-max-microvolt = <3008000>;
177 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
178 regulator-allow-set-load;
179 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
180 RPMH_REGULATOR_MODE_HPM>;
181 };
182
183 vreg_l9b_2p9: ldo9 {
184 regulator-name = "vreg_l9b_2p9";
185 regulator-min-microvolt = <2960000>;
186 regulator-max-microvolt = <3008000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 regulator-allow-set-load;
189 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
190 RPMH_REGULATOR_MODE_HPM>;
191 };
192
193 vreg_l11b_1p2: ldo11 {
194 regulator-name = "vreg_l11b_1p2";
195 regulator-min-microvolt = <1200000>;
196 regulator-max-microvolt = <1504000>;
197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 regulator-allow-set-load;
199 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
200 RPMH_REGULATOR_MODE_HPM>;
201 };
202
203 vreg_l12b_1p8: ldo12 {
204 regulator-name = "vreg_l12b_1p8";
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <1800000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 regulator-allow-set-load;
209 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
210 RPMH_REGULATOR_MODE_HPM>;
211 };
212
213 vreg_l13b_3p0: ldo13 {
214 regulator-name = "vreg_l13b_3p0";
215 regulator-min-microvolt = <3000000>;
216 regulator-max-microvolt = <3000000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-allow-set-load;
219 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
220 RPMH_REGULATOR_MODE_HPM>;
221 };
222
223 vreg_l14b_3p2: ldo14 {
224 regulator-name = "vreg_l14b_3p2";
225 regulator-min-microvolt = <3200000>;
226 regulator-max-microvolt = <3200000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-allow-set-load;
229 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
230 RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_l15b_1p8: ldo15 {
234 regulator-name = "vreg_l15b_1p8";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 regulator-allow-set-load;
239 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
240 RPMH_REGULATOR_MODE_HPM>;
241 };
242
243 vreg_l16b_2p8: ldo16 {
244 regulator-name = "vreg_l16b_2p8";
245 regulator-min-microvolt = <2800000>;
246 regulator-max-microvolt = <2800000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 regulator-allow-set-load;
249 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
250 RPMH_REGULATOR_MODE_HPM>;
251 };
252
253 vreg_l17b_2p5: ldo17 {
254 regulator-name = "vreg_l17b_2p5";
255 regulator-min-microvolt = <2504000>;
256 regulator-max-microvolt = <2504000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-allow-set-load;
259 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
260 RPMH_REGULATOR_MODE_HPM>;
261 };
262 };
263
264 regulators-1 {
265 compatible = "qcom,pm8550vs-rpmh-regulators";
266
267 vdd-l1-supply = <&vreg_s1c_1p2>;
268 vdd-l2-supply = <&vreg_s1c_1p2>;
269 vdd-l3-supply = <&vreg_s1c_1p2>;
270 vdd-s1-supply = <&vph_pwr>;
271 vdd-s2-supply = <&vph_pwr>;
272 vdd-s3-supply = <&vph_pwr>;
273 vdd-s4-supply = <&vph_pwr>;
274 vdd-s5-supply = <&vph_pwr>;
275 vdd-s6-supply = <&vph_pwr>;
276
277 qcom,pmic-id = "c";
278
279 vreg_s1c_1p2: smps1 {
280 regulator-name = "vreg_s1c_1p2";
281 regulator-min-microvolt = <1256000>;
282 regulator-max-microvolt = <1348000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 };
285
286 vreg_s2c_0p8: smps2 {
287 regulator-name = "vreg_s2c_0p8";
288 regulator-min-microvolt = <852000>;
289 regulator-max-microvolt = <1036000>;
290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
291 };
292
293 vreg_s3c_0p9: smps3 {
294 regulator-name = "vreg_s3c_0p9";
295 regulator-min-microvolt = <976000>;
296 regulator-max-microvolt = <1064000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
298 };
299
300 vreg_s4c_1p2: smps4 {
301 regulator-name = "vreg_s4c_1p2";
302 regulator-min-microvolt = <1224000>;
303 regulator-max-microvolt = <1280000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 };
306
307 vreg_s5c_0p7: smps5 {
308 regulator-name = "vreg_s5c_0p7";
309 regulator-min-microvolt = <752000>;
310 regulator-max-microvolt = <900000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
312 };
313
314 vreg_s6c_1p8: smps6 {
315 regulator-name = "vreg_s6c_1p8";
316 regulator-min-microvolt = <1856000>;
317 regulator-max-microvolt = <2000000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 };
320
321 vreg_l1c_1p2: ldo1 {
322 regulator-name = "vreg_l1c_1p2";
323 regulator-min-microvolt = <1200000>;
324 regulator-max-microvolt = <1200000>;
325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
326 regulator-allow-set-load;
327 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
328 RPMH_REGULATOR_MODE_HPM>;
329 };
330
331 vreg_l3c_1p2: ldo3 {
332 regulator-name = "vreg_l3c_1p2";
333 regulator-min-microvolt = <1200000>;
334 regulator-max-microvolt = <1200000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 regulator-allow-set-load;
337 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
338 RPMH_REGULATOR_MODE_HPM>;
339 };
340 };
341
342 regulators-2 {
343 compatible = "qcom,pm8550vs-rpmh-regulators";
344
345 vdd-l1-supply = <&vreg_s3c_0p9>;
346
347 qcom,pmic-id = "d";
348
349 vreg_l1d_0p88: ldo1 {
350 regulator-name = "vreg_l1d_0p88";
351 regulator-min-microvolt = <912000>;
352 regulator-max-microvolt = <920000>;
353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
354 regulator-allow-set-load;
355 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
356 RPMH_REGULATOR_MODE_HPM>;
357 };
358 };
359
360 regulators-3 {
361 compatible = "qcom,pm8550vs-rpmh-regulators";
362
363 vdd-l3-supply = <&vreg_s3c_0p9>;
364
365 qcom,pmic-id = "e";
366
367 vreg_l3e_0p9: ldo3 {
368 regulator-name = "vreg_l3e_0p9";
369 regulator-min-microvolt = <880000>;
370 regulator-max-microvolt = <920000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
372 regulator-allow-set-load;
373 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
374 RPMH_REGULATOR_MODE_HPM>;
375 };
376 };
377
378 regulators-4 {
379 compatible = "qcom,pm8550vs-rpmh-regulators";
380
381 vdd-l1-supply = <&vreg_s3c_0p9>;
382 vdd-l3-supply = <&vreg_s3c_0p9>;
383
384 qcom,pmic-id = "g";
385
386 vreg_l1g_0p91: ldo1 {
387 regulator-name = "vreg_l1g_0p91";
388 regulator-min-microvolt = <912000>;
389 regulator-max-microvolt = <920000>;
390 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 regulator-allow-set-load;
392 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
393 RPMH_REGULATOR_MODE_HPM>;
394 };
395
396 vreg_l3g_0p91: ldo3 {
397 regulator-name = "vreg_l3g_0p91";
398 regulator-min-microvolt = <880000>;
399 regulator-max-microvolt = <912000>;
400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
401 regulator-allow-set-load;
402 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
403 RPMH_REGULATOR_MODE_HPM>;
404 };
405 };
406
407 regulators-5 {
408 compatible = "qcom,pm8550ve-rpmh-regulators";
409
410 vdd-l1-supply = <&vreg_s3c_0p9>;
411 vdd-l2-supply = <&vreg_s3c_0p9>;
412 vdd-l3-supply = <&vreg_s1c_1p2>;
413 vdd-s4-supply = <&vph_pwr>;
414
415 qcom,pmic-id = "i";
416
417 vreg_s4i_0p85: smps4 {
418 regulator-name = "vreg_s4i_0p85";
419 regulator-min-microvolt = <852000>;
420 regulator-max-microvolt = <1004000>;
421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 };
423
424 vreg_l1i_0p88: ldo1 {
425 regulator-name = "vreg_l1i_0p88";
426 regulator-min-microvolt = <880000>;
427 regulator-max-microvolt = <912000>;
428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
429 regulator-allow-set-load;
430 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
431 RPMH_REGULATOR_MODE_HPM>;
432 };
433
434 vreg_l2i_0p88: ldo2 {
435 regulator-name = "vreg_l2i_0p88";
436 regulator-min-microvolt = <880000>;
437 regulator-max-microvolt = <912000>;
438 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 regulator-allow-set-load;
440 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
441 RPMH_REGULATOR_MODE_HPM>;
442 };
443
444 vreg_l3i_1p2: ldo3 {
445 regulator-name = "vreg_l3i_0p91";
446 regulator-min-microvolt = <1200000>;
447 regulator-max-microvolt = <1200000>;
448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
449 regulator-allow-set-load;
450 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
451 RPMH_REGULATOR_MODE_HPM>;
452 };
453 };
454
455 regulators-6 {
456 compatible = "qcom,pm8010-rpmh-regulators";
457 qcom,pmic-id = "m";
458
459 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
460 vdd-l3-l4-supply = <&vreg_bob2>;
461 vdd-l5-supply = <&vreg_s6c_1p8>;
462 vdd-l6-supply = <&vreg_bob1>;
463 vdd-l7-supply = <&vreg_bob1>;
464
465 vreg_l1m_1p1: ldo1 {
466 regulator-name = "vreg_l1m_1p1";
467 regulator-min-microvolt = <1104000>;
468 regulator-max-microvolt = <1104000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
470 regulator-allow-set-load;
471 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
472 RPMH_REGULATOR_MODE_HPM>;
473 };
474
475 vreg_l2m_1p056: ldo2 {
476 regulator-name = "vreg_l2m_1p056";
477 regulator-min-microvolt = <1056000>;
478 regulator-max-microvolt = <1056000>;
479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
480 regulator-allow-set-load;
481 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
482 RPMH_REGULATOR_MODE_HPM>;
483 };
484
485 vreg_l3m_2p8: ldo3 {
486 regulator-name = "vreg_l3m_2p8";
487 regulator-min-microvolt = <2800000>;
488 regulator-max-microvolt = <2800000>;
489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
490 };
491
492 vreg_l4m_2p8: ldo4 {
493 regulator-name = "vreg_l4m_2p8";
494 regulator-min-microvolt = <2800000>;
495 regulator-max-microvolt = <2800000>;
496 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
497 };
498
499 vreg_l5m_1p8: ldo5 {
500 regulator-name = "vreg_l5m_1p8";
501 regulator-min-microvolt = <1800000>;
502 regulator-max-microvolt = <1800000>;
503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
504 };
505
506 vreg_l6m_2p8: ldo6 {
507 regulator-name = "vreg_l6m_2p8";
508 regulator-min-microvolt = <2800000>;
509 regulator-max-microvolt = <2800000>;
510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
511 };
512
513 vreg_l7m_2p96: ldo7 {
514 regulator-name = "vreg_l7m_2p96";
515 regulator-min-microvolt = <2960000>;
516 regulator-max-microvolt = <2960000>;
517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
518 };
519 };
520
521 regulators-7 {
522 compatible = "qcom,pm8010-rpmh-regulators";
523 qcom,pmic-id = "n";
524
525 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
526 vdd-l3-l4-supply = <&vreg_s6c_1p8>;
527 vdd-l5-supply = <&vreg_bob2>;
528 vdd-l6-supply = <&vreg_bob2>;
529 vdd-l7-supply = <&vreg_bob1>;
530
531 vreg_l1n_1p1: ldo1 {
532 regulator-name = "vreg_l1n_1p1";
533 regulator-min-microvolt = <1104000>;
534 regulator-max-microvolt = <1104000>;
535 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
536 regulator-allow-set-load;
537 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
538 RPMH_REGULATOR_MODE_HPM>;
539 };
540
541 vreg_l2n_1p056: ldo2 {
542 regulator-name = "vreg_l2n_1p056";
543 regulator-min-microvolt = <1056000>;
544 regulator-max-microvolt = <1056000>;
545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
546 regulator-allow-set-load;
547 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
548 RPMH_REGULATOR_MODE_HPM>;
549 };
550
551 vreg_l3n_1p8: ldo3 {
552 regulator-name = "vreg_l3n_1p8";
553 regulator-min-microvolt = <1800000>;
554 regulator-max-microvolt = <1800000>;
555 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 };
557
558 vreg_l4n_1p8: ldo4 {
559 regulator-name = "vreg_l4n_1p8";
560 regulator-min-microvolt = <1800000>;
561 regulator-max-microvolt = <1800000>;
562 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
563 };
564
565 vreg_l5n_2p8: ldo5 {
566 regulator-name = "vreg_l5n_2p8";
567 regulator-min-microvolt = <2800000>;
568 regulator-max-microvolt = <2800000>;
569 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 };
571
572 vreg_l6n_2p8: ldo6 {
573 regulator-name = "vreg_l6n_2p8";
574 regulator-min-microvolt = <2800000>;
575 regulator-max-microvolt = <2800000>;
576 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
577 };
578
579 vreg_l7n_3p3: ldo7 {
580 regulator-name = "vreg_l7n_3p3";
581 regulator-min-microvolt = <3304000>;
582 regulator-max-microvolt = <3304000>;
583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 };
585 };
586 };
587
588 &dispcc {
589 status = "okay";
590 };
591
592 &lpass_tlmm {
593 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
594 pins = "gpio21";
595 function = "gpio";
596 drive-strength = <16>;
597 bias-disable;
598 output-low;
599 };
600 };
601
602 &mdss {
603 status = "okay";
604 };
605
606 &mdss_dsi0 {
607 vdda-supply = <&vreg_l3i_1p2>;
608
609 status = "okay";
610
611 panel@0 {
612 compatible = "visionox,vtdr6130";
613 reg = <0>;
614
615 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
616
617 vddio-supply = <&vreg_l12b_1p8>;
618 vci-supply = <&vreg_l13b_3p0>;
619 vdd-supply = <&vreg_l11b_1p2>;
620
621 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
622 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
623 pinctrl-names = "default", "sleep";
624
625 port {
626 panel0_in: endpoint {
627 remote-endpoint = <&mdss_dsi0_out>;
628 };
629 };
630 };
631 };
632
633 &mdss_dsi0_out {
634 remote-endpoint = <&panel0_in>;
635 data-lanes = <0 1 2 3>;
636 };
637
638 &mdss_dsi0_phy {
639 vdds-supply = <&vreg_l1i_0p88>;
640
641 status = "okay";
642 };
643
644 &pcie0 {
645 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
646 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
647
648 pinctrl-0 = <&pcie0_default_state>;
649 pinctrl-names = "default";
650
651 status = "okay";
652 };
653
654 &pcie0_phy {
655 vdda-phy-supply = <&vreg_l1i_0p88>;
656 vdda-pll-supply = <&vreg_l3i_1p2>;
657
658 status = "okay";
659 };
660
661 &pcie1 {
662 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
663 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
664
665 pinctrl-0 = <&pcie1_default_state>;
666 pinctrl-names = "default";
667
668 status = "okay";
669 };
670
671 &pcie1_phy {
672 vdda-phy-supply = <&vreg_l3e_0p9>;
673 vdda-pll-supply = <&vreg_l3i_1p2>;
674 vdda-qref-supply = <&vreg_l1i_0p88>;
675
676 status = "okay";
677 };
678
679 &pm8550_gpios {
680 sdc2_card_det_n: sdc2-card-det-state {
681 pins = "gpio12";
682 function = "normal";
683 bias-pull-up;
684 input-enable;
685 output-disable;
686 power-source = <1>; /* 1.8 V */
687 };
688 };
689
690 &pm8550b_eusb2_repeater {
691 vdd18-supply = <&vreg_l15b_1p8>;
692 vdd3-supply = <&vreg_l5b_3p1>;
693 };
694
695 &qupv3_id_1 {
696 status = "okay";
697 };
698
699 &remoteproc_adsp {
700 firmware-name = "qcom/sm8650/adsp.mbn",
701 "qcom/sm8650/adsp_dtb.mbn";
702
703 status = "okay";
704 };
705
706 &remoteproc_cdsp {
707 firmware-name = "qcom/sm8650/cdsp.mbn",
708 "qcom/sm8650/cdsp_dtb.mbn";
709
710 status = "okay";
711 };
712
713 &remoteproc_mpss {
714 firmware-name = "qcom/sm8650/modem.mbn",
715 "qcom/sm8650/modem_dtb.mbn";
716
717 status = "okay";
718 };
719
720 &sdhc_2 {
721 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
722
723 vmmc-supply = <&vreg_l9b_2p9>;
724 vqmmc-supply = <&vreg_l8b_1p8>;
725 bus-width = <4>;
726 no-sdio;
727 no-mmc;
728
729 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
730 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
731 pinctrl-names = "default", "sleep";
732
733 status = "okay";
734 };
735
736 &sleep_clk {
737 clock-frequency = <32000>;
738 };
739
740 &swr0 {
741 status = "okay";
742
743 /* WSA8845, Speaker Left */
744 left_spkr: speaker@0,0 {
745 compatible = "sdw20217020400";
746 reg = <0 0>;
747 pinctrl-0 = <&spkr_1_sd_n_active>;
748 pinctrl-names = "default";
749 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
750 #sound-dai-cells = <0>;
751 sound-name-prefix = "SpkrLeft";
752 vdd-1p8-supply = <&vreg_l15b_1p8>;
753 vdd-io-supply = <&vreg_l3c_1p2>;
754
755 /*
756 * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
757 * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
758 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
759 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
760 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
761 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
762 */
763 qcom,port-mapping = <1 2 3 7 10 13>;
764 };
765
766 /* WSA8845, Speaker Right */
767 right_spkr: speaker@0,1 {
768 compatible = "sdw20217020400";
769 reg = <0 1>;
770 pinctrl-0 = <&spkr_2_sd_n_active>;
771 pinctrl-names = "default";
772 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
773 #sound-dai-cells = <0>;
774 sound-name-prefix = "SpkrRight";
775 vdd-1p8-supply = <&vreg_l15b_1p8>;
776 vdd-io-supply = <&vreg_l3c_1p2>;
777
778 /*
779 * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
780 * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
781 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
782 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
783 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
784 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
785 */
786 qcom,port-mapping = <4 5 6 7 11 13>;
787 };
788 };
789
790 &tlmm {
791 /* Reserved I/Os for NFC */
792 gpio-reserved-ranges = <32 8>, <74 1>;
793
794 disp0_reset_n_active: disp0-reset-n-active-state {
795 pins = "gpio133";
796 function = "gpio";
797 drive-strength = <8>;
798 bias-disable;
799 };
800
801 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
802 pins = "gpio133";
803 function = "gpio";
804 drive-strength = <2>;
805 bias-pull-down;
806 };
807
808 mdp_vsync_active: mdp-vsync-active-state {
809 pins = "gpio86";
810 function = "mdp_vsync";
811 drive-strength = <2>;
812 bias-pull-down;
813 };
814
815 mdp_vsync_suspend: mdp-vsync-suspend-state {
816 pins = "gpio86";
817 function = "mdp_vsync";
818 drive-strength = <2>;
819 bias-pull-down;
820 };
821
822 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
823 pins = "gpio77";
824 function = "gpio";
825 drive-strength = <16>;
826 bias-disable;
827 output-low;
828 };
829 };
830
831 &uart15 {
832 status = "okay";
833 };
834
835 &ufs_mem_hc {
836 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
837
838 vcc-supply = <&vreg_l17b_2p5>;
839 vcc-max-microamp = <1300000>;
840 vccq-supply = <&vreg_l1c_1p2>;
841 vccq-max-microamp = <1200000>;
842
843 status = "okay";
844 };
845
846 &ufs_mem_phy {
847 vdda-phy-supply = <&vreg_l1d_0p88>;
848 vdda-pll-supply = <&vreg_l3i_1p2>;
849
850 status = "okay";
851 };
852
853 /*
854 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
855 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
856 * USB SS -> USB-C
857 */
858
859 &usb_1 {
860 status = "okay";
861 };
862
863 &usb_1_dwc3 {
864 dr_mode = "otg";
865 usb-role-switch;
866 };
867
868 &usb_1_dwc3_hs {
869 remote-endpoint = <&pmic_glink_hs_in>;
870 };
871
872 &usb_1_hsphy {
873 vdd-supply = <&vreg_l1i_0p88>;
874 vdda12-supply = <&vreg_l3i_1p2>;
875
876 phys = <&pm8550b_eusb2_repeater>;
877
878 status = "okay";
879 };
880
881 &usb_dp_qmpphy {
882 vdda-phy-supply = <&vreg_l3i_1p2>;
883 vdda-pll-supply = <&vreg_l3g_0p91>;
884
885 status = "okay";
886 };
887
888 &usb_dp_qmpphy_out {
889 remote-endpoint = <&pmic_glink_ss_in>;
890 };
891
892 &xo_board {
893 clock-frequency = <76800000>;
894 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.