1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10
11 #include "x1e80100.dtsi"
12 #include "x1e80100-pmics.dtsi"
13
14 / {
15 model = "Qualcomm Technologies, Inc. X1E80100 CRD";
16 compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
17
18 aliases {
19 serial0 = &uart21;
20 };
21
22 wcd938x: audio-codec {
23 compatible = "qcom,wcd9385-codec";
24
25 pinctrl-names = "default";
26 pinctrl-0 = <&wcd_default>;
27
28 qcom,micbias1-microvolt = <1800000>;
29 qcom,micbias2-microvolt = <1800000>;
30 qcom,micbias3-microvolt = <1800000>;
31 qcom,micbias4-microvolt = <1800000>;
32 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
33 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
34 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
35 qcom,rx-device = <&wcd_rx>;
36 qcom,tx-device = <&wcd_tx>;
37
38 reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
39
40 vdd-buck-supply = <&vreg_l15b_1p8>;
41 vdd-rxtx-supply = <&vreg_l15b_1p8>;
42 vdd-io-supply = <&vreg_l15b_1p8>;
43 vdd-mic-bias-supply = <&vreg_bob1>;
44
45 #sound-dai-cells = <1>;
46 };
47
48 chosen {
49 stdout-path = "serial0:115200n8";
50 };
51
52 pmic-glink {
53 compatible = "qcom,x1e80100-pmic-glink",
54 "qcom,sm8550-pmic-glink",
55 "qcom,pmic-glink";
56 #address-cells = <1>;
57 #size-cells = <0>;
58 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
59 <&tlmm 123 GPIO_ACTIVE_HIGH>,
60 <&tlmm 125 GPIO_ACTIVE_HIGH>;
61
62 /* Left-side rear port */
63 connector@0 {
64 compatible = "usb-c-connector";
65 reg = <0>;
66 power-role = "dual";
67 data-role = "dual";
68
69 ports {
70 #address-cells = <1>;
71 #size-cells = <0>;
72
73 port@0 {
74 reg = <0>;
75
76 pmic_glink_ss0_hs_in: endpoint {
77 remote-endpoint = <&usb_1_ss0_dwc3_hs>;
78 };
79 };
80
81 port@1 {
82 reg = <1>;
83
84 pmic_glink_ss0_ss_in: endpoint {
85 remote-endpoint = <&usb_1_ss0_qmpphy_out>;
86 };
87 };
88 };
89 };
90
91 /* Left-side front port */
92 connector@1 {
93 compatible = "usb-c-connector";
94 reg = <1>;
95 power-role = "dual";
96 data-role = "dual";
97
98 ports {
99 #address-cells = <1>;
100 #size-cells = <0>;
101
102 port@0 {
103 reg = <0>;
104
105 pmic_glink_ss1_hs_in: endpoint {
106 remote-endpoint = <&usb_1_ss1_dwc3_hs>;
107 };
108 };
109
110 port@1 {
111 reg = <1>;
112
113 pmic_glink_ss1_ss_in: endpoint {
114 remote-endpoint = <&usb_1_ss1_qmpphy_out>;
115 };
116 };
117 };
118 };
119
120 /* Right-side port */
121 connector@2 {
122 compatible = "usb-c-connector";
123 reg = <2>;
124 power-role = "dual";
125 data-role = "dual";
126
127 ports {
128 #address-cells = <1>;
129 #size-cells = <0>;
130
131 port@0 {
132 reg = <0>;
133
134 pmic_glink_ss2_hs_in: endpoint {
135 remote-endpoint = <&usb_1_ss2_dwc3_hs>;
136 };
137 };
138
139 port@1 {
140 reg = <1>;
141
142 pmic_glink_ss2_ss_in: endpoint {
143 remote-endpoint = <&usb_1_ss2_qmpphy_out>;
144 };
145 };
146 };
147 };
148 };
149
150 reserved-memory {
151 linux,cma {
152 compatible = "shared-dma-pool";
153 size = <0x0 0x8000000>;
154 reusable;
155 linux,cma-default;
156 };
157 };
158
159 sound {
160 compatible = "qcom,x1e80100-sndcard";
161 model = "X1E80100-CRD";
162 audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
163 "TwitterLeft IN", "WSA WSA_SPK2 OUT",
164 "WooferRight IN", "WSA2 WSA_SPK2 OUT",
165 "TwitterRight IN", "WSA2 WSA_SPK2 OUT",
166 "IN1_HPHL", "HPHL_OUT",
167 "IN2_HPHR", "HPHR_OUT",
168 "AMIC2", "MIC BIAS2",
169 "VA DMIC0", "MIC BIAS3",
170 "VA DMIC1", "MIC BIAS3",
171 "VA DMIC2", "MIC BIAS1",
172 "VA DMIC3", "MIC BIAS1",
173 "VA DMIC0", "VA MIC BIAS3",
174 "VA DMIC1", "VA MIC BIAS3",
175 "VA DMIC2", "VA MIC BIAS1",
176 "VA DMIC3", "VA MIC BIAS1",
177 "TX SWR_INPUT1", "ADC2_OUTPUT";
178
179 wcd-playback-dai-link {
180 link-name = "WCD Playback";
181
182 cpu {
183 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
184 };
185
186 codec {
187 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
188 };
189
190 platform {
191 sound-dai = <&q6apm>;
192 };
193 };
194
195 wcd-capture-dai-link {
196 link-name = "WCD Capture";
197
198 cpu {
199 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
200 };
201
202 codec {
203 sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
204 };
205
206 platform {
207 sound-dai = <&q6apm>;
208 };
209 };
210
211 wsa-dai-link {
212 link-name = "WSA Playback";
213
214 cpu {
215 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
216 };
217
218 codec {
219 sound-dai = <&left_woofer>, <&left_tweeter>,
220 <&swr0 0>, <&lpass_wsamacro 0>,
221 <&right_woofer>, <&right_tweeter>,
222 <&swr3 0>, <&lpass_wsa2macro 0>;
223 };
224
225 platform {
226 sound-dai = <&q6apm>;
227 };
228 };
229
230 va-dai-link {
231 link-name = "VA Capture";
232
233 cpu {
234 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
235 };
236
237 codec {
238 sound-dai = <&lpass_vamacro 0>;
239 };
240
241 platform {
242 sound-dai = <&q6apm>;
243 };
244 };
245 };
246
247 vph_pwr: vph-pwr-regulator {
248 compatible = "regulator-fixed";
249
250 regulator-name = "vph_pwr";
251 regulator-min-microvolt = <3700000>;
252 regulator-max-microvolt = <3700000>;
253
254 regulator-always-on;
255 regulator-boot-on;
256 };
257
258 vreg_edp_3p3: regulator-edp-3p3 {
259 compatible = "regulator-fixed";
260
261 regulator-name = "VREG_EDP_3P3";
262 regulator-min-microvolt = <3300000>;
263 regulator-max-microvolt = <3300000>;
264
265 gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
266 enable-active-high;
267
268 pinctrl-0 = <&edp_reg_en>;
269 pinctrl-names = "default";
270
271 regulator-boot-on;
272 };
273
274 vreg_nvme: regulator-nvme {
275 compatible = "regulator-fixed";
276
277 regulator-name = "VREG_NVME_3P3";
278 regulator-min-microvolt = <3300000>;
279 regulator-max-microvolt = <3300000>;
280
281 gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
282 enable-active-high;
283
284 pinctrl-names = "default";
285 pinctrl-0 = <&nvme_reg_en>;
286 };
287 };
288
289 &apps_rsc {
290 regulators-0 {
291 compatible = "qcom,pm8550-rpmh-regulators";
292 qcom,pmic-id = "b";
293
294 vdd-bob1-supply = <&vph_pwr>;
295 vdd-bob2-supply = <&vph_pwr>;
296 vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
297 vdd-l2-l13-l14-supply = <&vreg_bob1>;
298 vdd-l5-l16-supply = <&vreg_bob1>;
299 vdd-l6-l7-supply = <&vreg_bob2>;
300 vdd-l8-l9-supply = <&vreg_bob1>;
301 vdd-l12-supply = <&vreg_s5j_1p2>;
302 vdd-l15-supply = <&vreg_s4c_1p8>;
303 vdd-l17-supply = <&vreg_bob2>;
304
305 vreg_bob1: bob1 {
306 regulator-name = "vreg_bob1";
307 regulator-min-microvolt = <3008000>;
308 regulator-max-microvolt = <3960000>;
309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
310 };
311
312 vreg_bob2: bob2 {
313 regulator-name = "vreg_bob2";
314 regulator-min-microvolt = <2504000>;
315 regulator-max-microvolt = <3008000>;
316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 };
318
319 vreg_l1b_1p8: ldo1 {
320 regulator-name = "vreg_l1b_1p8";
321 regulator-min-microvolt = <1800000>;
322 regulator-max-microvolt = <1800000>;
323 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
324 };
325
326 vreg_l2b_3p0: ldo2 {
327 regulator-name = "vreg_l2b_3p0";
328 regulator-min-microvolt = <3072000>;
329 regulator-max-microvolt = <3100000>;
330 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
331 };
332
333 vreg_l4b_1p8: ldo4 {
334 regulator-name = "vreg_l4b_1p8";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <1800000>;
337 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
338 };
339
340 vreg_l5b_3p0: ldo5 {
341 regulator-name = "vreg_l5b_3p0";
342 regulator-min-microvolt = <3000000>;
343 regulator-max-microvolt = <3000000>;
344 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
345 };
346
347 vreg_l6b_1p8: ldo6 {
348 regulator-name = "vreg_l6b_1p8";
349 regulator-min-microvolt = <1800000>;
350 regulator-max-microvolt = <2960000>;
351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 };
353
354 vreg_l7b_2p8: ldo7 {
355 regulator-name = "vreg_l7b_2p8";
356 regulator-min-microvolt = <2800000>;
357 regulator-max-microvolt = <2800000>;
358 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
359 };
360
361 vreg_l8b_3p0: ldo8 {
362 regulator-name = "vreg_l8b_3p0";
363 regulator-min-microvolt = <3072000>;
364 regulator-max-microvolt = <3072000>;
365 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
366 };
367
368 vreg_l9b_2p9: ldo9 {
369 regulator-name = "vreg_l9b_2p9";
370 regulator-min-microvolt = <2960000>;
371 regulator-max-microvolt = <2960000>;
372 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
373 };
374
375 vreg_l10b_1p8: ldo10 {
376 regulator-name = "vreg_l10b_1p8";
377 regulator-min-microvolt = <1800000>;
378 regulator-max-microvolt = <1800000>;
379 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
380 };
381
382 vreg_l12b_1p2: ldo12 {
383 regulator-name = "vreg_l12b_1p2";
384 regulator-min-microvolt = <1200000>;
385 regulator-max-microvolt = <1200000>;
386 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
387 };
388
389 vreg_l13b_3p0: ldo13 {
390 regulator-name = "vreg_l13b_3p0";
391 regulator-min-microvolt = <3072000>;
392 regulator-max-microvolt = <3100000>;
393 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
394 };
395
396 vreg_l14b_3p0: ldo14 {
397 regulator-name = "vreg_l14b_3p0";
398 regulator-min-microvolt = <3072000>;
399 regulator-max-microvolt = <3072000>;
400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
401 };
402
403 vreg_l15b_1p8: ldo15 {
404 regulator-name = "vreg_l15b_1p8";
405 regulator-min-microvolt = <1800000>;
406 regulator-max-microvolt = <1800000>;
407 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
408 };
409
410 vreg_l16b_2p9: ldo16 {
411 regulator-name = "vreg_l16b_2p9";
412 regulator-min-microvolt = <2912000>;
413 regulator-max-microvolt = <2912000>;
414 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
415 };
416
417 vreg_l17b_2p5: ldo17 {
418 regulator-name = "vreg_l17b_2p5";
419 regulator-min-microvolt = <2504000>;
420 regulator-max-microvolt = <2504000>;
421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 };
423 };
424
425 regulators-1 {
426 compatible = "qcom,pm8550ve-rpmh-regulators";
427 qcom,pmic-id = "c";
428
429 vdd-l1-supply = <&vreg_s5j_1p2>;
430 vdd-l2-supply = <&vreg_s1f_0p7>;
431 vdd-l3-supply = <&vreg_s1f_0p7>;
432 vdd-s4-supply = <&vph_pwr>;
433
434 vreg_s4c_1p8: smps4 {
435 regulator-name = "vreg_s4c_1p8";
436 regulator-min-microvolt = <1856000>;
437 regulator-max-microvolt = <2000000>;
438 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 };
440
441 vreg_l1c_1p2: ldo1 {
442 regulator-name = "vreg_l1c_1p2";
443 regulator-min-microvolt = <1200000>;
444 regulator-max-microvolt = <1200000>;
445 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
446 };
447
448 vreg_l2c_0p8: ldo2 {
449 regulator-name = "vreg_l2c_0p8";
450 regulator-min-microvolt = <880000>;
451 regulator-max-microvolt = <920000>;
452 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
453 };
454
455 vreg_l3c_0p8: ldo3 {
456 regulator-name = "vreg_l3c_0p8";
457 regulator-min-microvolt = <880000>;
458 regulator-max-microvolt = <920000>;
459 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
460 };
461 };
462
463 regulators-2 {
464 compatible = "qcom,pmc8380-rpmh-regulators";
465 qcom,pmic-id = "d";
466
467 vdd-l1-supply = <&vreg_s1f_0p7>;
468 vdd-l2-supply = <&vreg_s1f_0p7>;
469 vdd-l3-supply = <&vreg_s4c_1p8>;
470 vdd-s1-supply = <&vph_pwr>;
471
472 vreg_l1d_0p8: ldo1 {
473 regulator-name = "vreg_l1d_0p8";
474 regulator-min-microvolt = <880000>;
475 regulator-max-microvolt = <920000>;
476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
477 };
478
479 vreg_l2d_0p9: ldo2 {
480 regulator-name = "vreg_l2d_0p9";
481 regulator-min-microvolt = <912000>;
482 regulator-max-microvolt = <920000>;
483 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
484 };
485
486 vreg_l3d_1p8: ldo3 {
487 regulator-name = "vreg_l3d_1p8";
488 regulator-min-microvolt = <1800000>;
489 regulator-max-microvolt = <1800000>;
490 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
491 };
492 };
493
494 regulators-3 {
495 compatible = "qcom,pmc8380-rpmh-regulators";
496 qcom,pmic-id = "e";
497
498 vdd-l2-supply = <&vreg_s1f_0p7>;
499 vdd-l3-supply = <&vreg_s5j_1p2>;
500
501 vreg_l2e_0p8: ldo2 {
502 regulator-name = "vreg_l2e_0p8";
503 regulator-min-microvolt = <880000>;
504 regulator-max-microvolt = <920000>;
505 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
506 };
507
508 vreg_l3e_1p2: ldo3 {
509 regulator-name = "vreg_l3e_1p2";
510 regulator-min-microvolt = <1200000>;
511 regulator-max-microvolt = <1200000>;
512 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
513 };
514 };
515
516 regulators-4 {
517 compatible = "qcom,pmc8380-rpmh-regulators";
518 qcom,pmic-id = "f";
519
520 vdd-l1-supply = <&vreg_s5j_1p2>;
521 vdd-l2-supply = <&vreg_s5j_1p2>;
522 vdd-l3-supply = <&vreg_s5j_1p2>;
523 vdd-s1-supply = <&vph_pwr>;
524
525 vreg_s1f_0p7: smps1 {
526 regulator-name = "vreg_s1f_0p7";
527 regulator-min-microvolt = <700000>;
528 regulator-max-microvolt = <1100000>;
529 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
530 };
531
532 vreg_l1f_1p0: ldo1 {
533 regulator-name = "vreg_l1f_1p0";
534 regulator-min-microvolt = <1024000>;
535 regulator-max-microvolt = <1024000>;
536 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
537 };
538
539 vreg_l2f_1p0: ldo2 {
540 regulator-name = "vreg_l2f_1p0";
541 regulator-min-microvolt = <1024000>;
542 regulator-max-microvolt = <1024000>;
543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
544 };
545
546 vreg_l3f_1p0: ldo3 {
547 regulator-name = "vreg_l3f_1p0";
548 regulator-min-microvolt = <1024000>;
549 regulator-max-microvolt = <1024000>;
550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
551 };
552 };
553
554 regulators-6 {
555 compatible = "qcom,pm8550ve-rpmh-regulators";
556 qcom,pmic-id = "i";
557
558 vdd-l1-supply = <&vreg_s4c_1p8>;
559 vdd-l2-supply = <&vreg_s5j_1p2>;
560 vdd-l3-supply = <&vreg_s1f_0p7>;
561 vdd-s1-supply = <&vph_pwr>;
562 vdd-s2-supply = <&vph_pwr>;
563
564 vreg_s1i_0p9: smps1 {
565 regulator-name = "vreg_s1i_0p9";
566 regulator-min-microvolt = <900000>;
567 regulator-max-microvolt = <920000>;
568 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
569 };
570
571 vreg_s2i_1p0: smps2 {
572 regulator-name = "vreg_s2i_1p0";
573 regulator-min-microvolt = <1000000>;
574 regulator-max-microvolt = <1100000>;
575 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
576 };
577
578 vreg_l1i_1p8: ldo1 {
579 regulator-name = "vreg_l1i_1p8";
580 regulator-min-microvolt = <1800000>;
581 regulator-max-microvolt = <1800000>;
582 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
583 };
584
585 vreg_l2i_1p2: ldo2 {
586 regulator-name = "vreg_l2i_1p2";
587 regulator-min-microvolt = <1200000>;
588 regulator-max-microvolt = <1200000>;
589 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
590 };
591
592 vreg_l3i_0p8: ldo3 {
593 regulator-name = "vreg_l3i_0p8";
594 regulator-min-microvolt = <880000>;
595 regulator-max-microvolt = <920000>;
596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
597 };
598 };
599
600 regulators-7 {
601 compatible = "qcom,pm8550ve-rpmh-regulators";
602 qcom,pmic-id = "j";
603
604 vdd-l1-supply = <&vreg_s1f_0p7>;
605 vdd-l2-supply = <&vreg_s5j_1p2>;
606 vdd-l3-supply = <&vreg_s1f_0p7>;
607 vdd-s5-supply = <&vph_pwr>;
608
609 vreg_s5j_1p2: smps5 {
610 regulator-name = "vreg_s5j_1p2";
611 regulator-min-microvolt = <1256000>;
612 regulator-max-microvolt = <1304000>;
613 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
614 };
615
616 vreg_l1j_0p8: ldo1 {
617 regulator-name = "vreg_l1j_0p8";
618 regulator-min-microvolt = <880000>;
619 regulator-max-microvolt = <920000>;
620 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
621 };
622
623 vreg_l2j_1p2: ldo2 {
624 regulator-name = "vreg_l2j_1p2";
625 regulator-min-microvolt = <1200000>;
626 regulator-max-microvolt = <1200000>;
627 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
628 };
629
630 vreg_l3j_0p8: ldo3 {
631 regulator-name = "vreg_l3j_0p8";
632 regulator-min-microvolt = <880000>;
633 regulator-max-microvolt = <920000>;
634 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
635 };
636 };
637 };
638
639 &gpu {
640 status = "okay";
641
642 zap-shader {
643 firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
644 };
645 };
646
647 &i2c0 {
648 clock-frequency = <400000>;
649
650 status = "okay";
651
652 touchpad@15 {
653 compatible = "hid-over-i2c";
654 reg = <0x15>;
655
656 hid-descr-addr = <0x1>;
657 interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
658
659 pinctrl-0 = <&tpad_default>;
660 pinctrl-names = "default";
661
662 wakeup-source;
663 };
664
665 keyboard@3a {
666 compatible = "hid-over-i2c";
667 reg = <0x3a>;
668
669 hid-descr-addr = <0x1>;
670 interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
671
672 pinctrl-0 = <&kybd_default>;
673 pinctrl-names = "default";
674
675 wakeup-source;
676 };
677 };
678
679 &i2c8 {
680 clock-frequency = <400000>;
681
682 status = "okay";
683
684 touchscreen@10 {
685 compatible = "hid-over-i2c";
686 reg = <0x10>;
687
688 hid-descr-addr = <0x1>;
689 interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
690
691 pinctrl-0 = <&ts0_default>;
692 pinctrl-names = "default";
693 };
694 };
695
696 &lpass_tlmm {
697 spkr_01_sd_n_active: spkr-01-sd-n-active-state {
698 pins = "gpio12";
699 function = "gpio";
700 drive-strength = <16>;
701 bias-disable;
702 output-low;
703 };
704
705 spkr_23_sd_n_active: spkr-23-sd-n-active-state {
706 pins = "gpio13";
707 function = "gpio";
708 drive-strength = <16>;
709 bias-disable;
710 output-low;
711 };
712 };
713
714 &lpass_vamacro {
715 pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
716 pinctrl-names = "default";
717
718 vdd-micb-supply = <&vreg_l1b_1p8>;
719 qcom,dmic-sample-rate = <4800000>;
720 };
721
722 &mdss {
723 status = "okay";
724 };
725
726 &mdss_dp3 {
727 compatible = "qcom,x1e80100-dp";
728 /delete-property/ #sound-dai-cells;
729
730 status = "okay";
731
732 aux-bus {
733 panel {
734 compatible = "samsung,atna45af01", "samsung,atna33xc20";
735 enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
736 power-supply = <&vreg_edp_3p3>;
737
738 pinctrl-0 = <&edp_bl_en>;
739 pinctrl-names = "default";
740
741 port {
742 edp_panel_in: endpoint {
743 remote-endpoint = <&mdss_dp3_out>;
744 };
745 };
746 };
747 };
748
749 ports {
750 port@1 {
751 reg = <1>;
752 mdss_dp3_out: endpoint {
753 data-lanes = <0 1 2 3>;
754 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
755
756 remote-endpoint = <&edp_panel_in>;
757 };
758 };
759 };
760 };
761
762 &mdss_dp3_phy {
763 vdda-phy-supply = <&vreg_l3j_0p8>;
764 vdda-pll-supply = <&vreg_l2j_1p2>;
765
766 status = "okay";
767 };
768
769 &pcie4 {
770 perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
771 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
772
773 pinctrl-0 = <&pcie4_default>;
774 pinctrl-names = "default";
775
776 status = "okay";
777 };
778
779 &pcie4_phy {
780 vdda-phy-supply = <&vreg_l3i_0p8>;
781 vdda-pll-supply = <&vreg_l3e_1p2>;
782
783 status = "okay";
784 };
785
786 &pcie6a {
787 perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
788 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
789
790 vddpe-3v3-supply = <&vreg_nvme>;
791
792 pinctrl-names = "default";
793 pinctrl-0 = <&pcie6a_default>;
794
795 status = "okay";
796 };
797
798 &pcie6a_phy {
799 vdda-phy-supply = <&vreg_l1d_0p8>;
800 vdda-pll-supply = <&vreg_l2j_1p2>;
801
802 status = "okay";
803 };
804
805 &pmc8380_3_gpios {
806 edp_bl_en: edp-bl-en-state {
807 pins = "gpio4";
808 function = "normal";
809 power-source = <1>; /* 1.8V */
810 input-disable;
811 output-enable;
812 };
813 };
814
815 &qupv3_0 {
816 status = "okay";
817 };
818
819 &qupv3_1 {
820 status = "okay";
821 };
822
823 &qupv3_2 {
824 status = "okay";
825 };
826
827 &remoteproc_adsp {
828 firmware-name = "qcom/x1e80100/adsp.mbn",
829 "qcom/x1e80100/adsp_dtb.mbn";
830
831 status = "okay";
832 };
833
834 &remoteproc_cdsp {
835 firmware-name = "qcom/x1e80100/cdsp.mbn",
836 "qcom/x1e80100/cdsp_dtb.mbn";
837
838 status = "okay";
839 };
840
841 &smb2360_0_eusb2_repeater {
842 vdd18-supply = <&vreg_l3d_1p8>;
843 vdd3-supply = <&vreg_l2b_3p0>;
844 };
845
846 &smb2360_1_eusb2_repeater {
847 vdd18-supply = <&vreg_l3d_1p8>;
848 vdd3-supply = <&vreg_l14b_3p0>;
849 };
850
851 &smb2360_2_eusb2_repeater {
852 vdd18-supply = <&vreg_l3d_1p8>;
853 vdd3-supply = <&vreg_l8b_3p0>;
854 };
855
856 &swr0 {
857 status = "okay";
858
859 pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
860 pinctrl-names = "default";
861
862 /* WSA8845, Left Woofer */
863 left_woofer: speaker@0,0 {
864 compatible = "sdw20217020400";
865 reg = <0 0>;
866 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
867 #sound-dai-cells = <0>;
868 sound-name-prefix = "WooferLeft";
869 vdd-1p8-supply = <&vreg_l15b_1p8>;
870 vdd-io-supply = <&vreg_l12b_1p2>;
871 };
872
873 /* WSA8845, Left Tweeter */
874 left_tweeter: speaker@0,1 {
875 compatible = "sdw20217020400";
876 reg = <0 1>;
877 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
878 #sound-dai-cells = <0>;
879 sound-name-prefix = "TwitterLeft";
880 vdd-1p8-supply = <&vreg_l15b_1p8>;
881 vdd-io-supply = <&vreg_l12b_1p2>;
882 };
883 };
884
885 &swr1 {
886 status = "okay";
887
888 /* WCD9385 RX */
889 wcd_rx: codec@0,4 {
890 compatible = "sdw20217010d00";
891 reg = <0 4>;
892 qcom,rx-port-mapping = <1 2 3 4 5>;
893 };
894 };
895
896 &swr2 {
897 status = "okay";
898
899 /* WCD9385 TX */
900 wcd_tx: codec@0,3 {
901 compatible = "sdw20217010d00";
902 reg = <0 3>;
903 qcom,tx-port-mapping = <2 2 3 4>;
904 };
905 };
906
907 &swr3 {
908 status = "okay";
909
910 pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
911 pinctrl-names = "default";
912
913 /* WSA8845, Right Woofer */
914 right_woofer: speaker@0,0 {
915 compatible = "sdw20217020400";
916 reg = <0 0>;
917 reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
918 #sound-dai-cells = <0>;
919 sound-name-prefix = "WooferRight";
920 vdd-1p8-supply = <&vreg_l15b_1p8>;
921 vdd-io-supply = <&vreg_l12b_1p2>;
922 };
923
924 /* WSA8845, Right Tweeter */
925 right_tweeter: speaker@0,1 {
926 compatible = "sdw20217020400";
927 reg = <0 1>;
928 reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
929 #sound-dai-cells = <0>;
930 sound-name-prefix = "TwitterRight";
931 vdd-1p8-supply = <&vreg_l15b_1p8>;
932 vdd-io-supply = <&vreg_l12b_1p2>;
933 };
934 };
935
936 &tlmm {
937 gpio-reserved-ranges = <34 2>, /* Unused */
938 <44 4>, /* SPI (TPM) */
939 <238 1>; /* UFS Reset */
940
941 edp_reg_en: edp-reg-en-state {
942 pins = "gpio70";
943 function = "gpio";
944 drive-strength = <16>;
945 bias-disable;
946 };
947
948 kybd_default: kybd-default-state {
949 pins = "gpio67";
950 function = "gpio";
951 bias-disable;
952 };
953
954 nvme_reg_en: nvme-reg-en-state {
955 pins = "gpio18";
956 function = "gpio";
957 drive-strength = <2>;
958 bias-disable;
959 };
960
961 pcie4_default: pcie4-default-state {
962 clkreq-n-pins {
963 pins = "gpio147";
964 function = "pcie4_clk";
965 drive-strength = <2>;
966 bias-pull-up;
967 };
968
969 perst-n-pins {
970 pins = "gpio146";
971 function = "gpio";
972 drive-strength = <2>;
973 bias-disable;
974 };
975
976 wake-n-pins {
977 pins = "gpio148";
978 function = "gpio";
979 drive-strength = <2>;
980 bias-pull-up;
981 };
982 };
983
984 pcie6a_default: pcie6a-default-state {
985 clkreq-n-pins {
986 pins = "gpio153";
987 function = "pcie6a_clk";
988 drive-strength = <2>;
989 bias-pull-up;
990 };
991
992 perst-n-pins {
993 pins = "gpio152";
994 function = "gpio";
995 drive-strength = <2>;
996 bias-disable;
997 };
998
999 wake-n-pins {
1000 pins = "gpio154";
1001 function = "gpio";
1002 drive-strength = <2>;
1003 bias-pull-up;
1004 };
1005 };
1006
1007 tpad_default: tpad-default-state {
1008 pins = "gpio3";
1009 function = "gpio";
1010 bias-disable;
1011 };
1012
1013 ts0_default: ts0-default-state {
1014 int-n-pins {
1015 pins = "gpio51";
1016 function = "gpio";
1017 bias-disable;
1018 };
1019
1020 reset-n-pins {
1021 pins = "gpio48";
1022 function = "gpio";
1023 output-high;
1024 drive-strength = <16>;
1025 };
1026 };
1027
1028 wcd_default: wcd-reset-n-active-state {
1029 pins = "gpio191";
1030 function = "gpio";
1031 drive-strength = <16>;
1032 bias-disable;
1033 output-low;
1034 };
1035 };
1036
1037 &uart21 {
1038 compatible = "qcom,geni-debug-uart";
1039 status = "okay";
1040 };
1041
1042 &usb_1_ss0_hsphy {
1043 vdd-supply = <&vreg_l3j_0p8>;
1044 vdda12-supply = <&vreg_l2j_1p2>;
1045
1046 phys = <&smb2360_0_eusb2_repeater>;
1047
1048 status = "okay";
1049 };
1050
1051 &usb_1_ss0_qmpphy {
1052 vdda-phy-supply = <&vreg_l3e_1p2>;
1053 vdda-pll-supply = <&vreg_l1j_0p8>;
1054
1055 status = "okay";
1056 };
1057
1058 &usb_1_ss0 {
1059 status = "okay";
1060 };
1061
1062 &usb_1_ss0_dwc3 {
1063 dr_mode = "host";
1064 };
1065
1066 &usb_1_ss0_dwc3_hs {
1067 remote-endpoint = <&pmic_glink_ss0_hs_in>;
1068 };
1069
1070 &usb_1_ss0_qmpphy_out {
1071 remote-endpoint = <&pmic_glink_ss0_ss_in>;
1072 };
1073
1074 &usb_1_ss1_hsphy {
1075 vdd-supply = <&vreg_l3j_0p8>;
1076 vdda12-supply = <&vreg_l2j_1p2>;
1077
1078 phys = <&smb2360_1_eusb2_repeater>;
1079
1080 status = "okay";
1081 };
1082
1083 &usb_1_ss1_qmpphy {
1084 vdda-phy-supply = <&vreg_l3e_1p2>;
1085 vdda-pll-supply = <&vreg_l2d_0p9>;
1086
1087 status = "okay";
1088 };
1089
1090 &usb_1_ss1 {
1091 status = "okay";
1092 };
1093
1094 &usb_1_ss1_dwc3 {
1095 dr_mode = "host";
1096 };
1097
1098 &usb_1_ss1_dwc3_hs {
1099 remote-endpoint = <&pmic_glink_ss1_hs_in>;
1100 };
1101
1102 &usb_1_ss1_qmpphy_out {
1103 remote-endpoint = <&pmic_glink_ss1_ss_in>;
1104 };
1105
1106 &usb_1_ss2_hsphy {
1107 vdd-supply = <&vreg_l3j_0p8>;
1108 vdda12-supply = <&vreg_l2j_1p2>;
1109
1110 phys = <&smb2360_2_eusb2_repeater>;
1111
1112 status = "okay";
1113 };
1114
1115 &usb_1_ss2_qmpphy {
1116 vdda-phy-supply = <&vreg_l3e_1p2>;
1117 vdda-pll-supply = <&vreg_l2d_0p9>;
1118
1119 status = "okay";
1120 };
1121
1122 &usb_1_ss2 {
1123 status = "okay";
1124 };
1125
1126 &usb_1_ss2_dwc3 {
1127 dr_mode = "host";
1128 };
1129
1130 &usb_1_ss2_dwc3_hs {
1131 remote-endpoint = <&pmic_glink_ss2_hs_in>;
1132 };
1133
1134 &usb_1_ss2_qmpphy_out {
1135 remote-endpoint = <&pmic_glink_ss2_ss_in>;
1136 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.