~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

Version: ~ [ linux-6.11-rc3 ] ~ [ linux-6.10.4 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.45 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.104 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.164 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.223 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.281 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.319 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
  4  */
  5 
  6 /dts-v1/;
  7 #include <dt-bindings/input/linux-event-codes.h>
  8 #include <dt-bindings/interrupt-controller/irq.h>
  9 #include <dt-bindings/pwm/pwm.h>
 10 #include <dt-bindings/usb/pd.h>
 11 #include "rk3399.dtsi"
 12 #include "rk3399-opp.dtsi"
 13 
 14 / {
 15         model = "Firefly-RK3399 Board";
 16         compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 17 
 18         aliases {
 19                 ethernet0 = &gmac;
 20                 mmc0 = &sdio0;
 21                 mmc1 = &sdmmc;
 22                 mmc2 = &sdhci;
 23         };
 24 
 25         chosen {
 26                 stdout-path = "serial2:1500000n8";
 27         };
 28 
 29         backlight: backlight {
 30                 compatible = "pwm-backlight";
 31                 enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 32                 pwms = <&pwm0 0 25000 0>;
 33                 brightness-levels = <
 34                           0   1   2   3   4   5   6   7
 35                           8   9  10  11  12  13  14  15
 36                          16  17  18  19  20  21  22  23
 37                          24  25  26  27  28  29  30  31
 38                          32  33  34  35  36  37  38  39
 39                          40  41  42  43  44  45  46  47
 40                          48  49  50  51  52  53  54  55
 41                          56  57  58  59  60  61  62  63
 42                          64  65  66  67  68  69  70  71
 43                          72  73  74  75  76  77  78  79
 44                          80  81  82  83  84  85  86  87
 45                          88  89  90  91  92  93  94  95
 46                          96  97  98  99 100 101 102 103
 47                         104 105 106 107 108 109 110 111
 48                         112 113 114 115 116 117 118 119
 49                         120 121 122 123 124 125 126 127
 50                         128 129 130 131 132 133 134 135
 51                         136 137 138 139 140 141 142 143
 52                         144 145 146 147 148 149 150 151
 53                         152 153 154 155 156 157 158 159
 54                         160 161 162 163 164 165 166 167
 55                         168 169 170 171 172 173 174 175
 56                         176 177 178 179 180 181 182 183
 57                         184 185 186 187 188 189 190 191
 58                         192 193 194 195 196 197 198 199
 59                         200 201 202 203 204 205 206 207
 60                         208 209 210 211 212 213 214 215
 61                         216 217 218 219 220 221 222 223
 62                         224 225 226 227 228 229 230 231
 63                         232 233 234 235 236 237 238 239
 64                         240 241 242 243 244 245 246 247
 65                         248 249 250 251 252 253 254 255>;
 66                 default-brightness-level = <200>;
 67         };
 68 
 69         clkin_gmac: external-gmac-clock {
 70                 compatible = "fixed-clock";
 71                 clock-frequency = <125000000>;
 72                 clock-output-names = "clkin_gmac";
 73                 #clock-cells = <0>;
 74         };
 75 
 76         dc_12v: dc-12v {
 77                 compatible = "regulator-fixed";
 78                 regulator-name = "dc_12v";
 79                 regulator-always-on;
 80                 regulator-boot-on;
 81                 regulator-min-microvolt = <12000000>;
 82                 regulator-max-microvolt = <12000000>;
 83         };
 84 
 85         gpio-keys {
 86                 compatible = "gpio-keys";
 87                 autorepeat;
 88                 pinctrl-names = "default";
 89                 pinctrl-0 = <&pwrbtn>;
 90 
 91                 key-power {
 92                         debounce-interval = <100>;
 93                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 94                         label = "GPIO Key Power";
 95                         linux,code = <KEY_POWER>;
 96                         wakeup-source;
 97                 };
 98         };
 99 
100         ir-receiver {
101                 compatible = "gpio-ir-receiver";
102                 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
103                 pinctrl-0 = <&ir_int>;
104                 pinctrl-names = "default";
105         };
106 
107         leds {
108                 compatible = "gpio-leds";
109                 pinctrl-names = "default";
110                 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
111 
112                 work_led: led-0 {
113                         label = "work";
114                         default-state = "on";
115                         gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
116                 };
117 
118                 diy_led: led-1 {
119                         label = "diy";
120                         default-state = "off";
121                         gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
122                 };
123         };
124 
125         rt5640-sound {
126                 compatible = "simple-audio-card";
127                 simple-audio-card,name = "rockchip,rt5640-codec";
128                 simple-audio-card,format = "i2s";
129                 simple-audio-card,mclk-fs = <256>;
130                 simple-audio-card,widgets =
131                         "Microphone", "Mic Jack",
132                         "Headphone", "Headphone Jack";
133                 simple-audio-card,routing =
134                         "Mic Jack", "MICBIAS1",
135                         "IN1P", "Mic Jack",
136                         "Headphone Jack", "HPOL",
137                         "Headphone Jack", "HPOR";
138 
139                 simple-audio-card,cpu {
140                         sound-dai = <&i2s1>;
141                 };
142 
143                 simple-audio-card,codec {
144                         sound-dai = <&rt5640>;
145                 };
146         };
147 
148         sdio_pwrseq: sdio-pwrseq {
149                 compatible = "mmc-pwrseq-simple";
150                 clocks = <&rk808 1>;
151                 clock-names = "ext_clock";
152                 pinctrl-names = "default";
153                 pinctrl-0 = <&wifi_enable_h>;
154 
155                 /*
156                  * On the module itself this is one of these (depending
157                  * on the actual card populated):
158                  * - SDIO_RESET_L_WL_REG_ON
159                  * - PDN (power down when low)
160                  */
161                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
162         };
163 
164         sound-dit {
165                 compatible = "audio-graph-card";
166                 label = "SPDIF";
167                 dais = <&spdif_p0>;
168         };
169 
170         spdif-dit {
171                 compatible = "linux,spdif-dit";
172                 #sound-dai-cells = <0>;
173 
174                 port {
175                         dit_p0_0: endpoint {
176                                 remote-endpoint = <&spdif_p0_0>;
177                         };
178                 };
179         };
180 
181         /* switched by pmic_sleep */
182         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
183                 compatible = "regulator-fixed";
184                 regulator-name = "vcc1v8_s3";
185                 regulator-always-on;
186                 regulator-boot-on;
187                 regulator-min-microvolt = <1800000>;
188                 regulator-max-microvolt = <1800000>;
189                 vin-supply = <&vcc_1v8>;
190         };
191 
192         vcc3v3_pcie: vcc3v3-pcie-regulator {
193                 compatible = "regulator-fixed";
194                 enable-active-high;
195                 gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
196                 pinctrl-names = "default";
197                 pinctrl-0 = <&pcie_pwr_en>;
198                 regulator-name = "vcc3v3_pcie";
199                 regulator-always-on;
200                 regulator-boot-on;
201                 vin-supply = <&dc_12v>;
202         };
203 
204         vcc3v3_sys: vcc3v3-sys {
205                 compatible = "regulator-fixed";
206                 regulator-name = "vcc3v3_sys";
207                 regulator-always-on;
208                 regulator-boot-on;
209                 regulator-min-microvolt = <3300000>;
210                 regulator-max-microvolt = <3300000>;
211                 vin-supply = <&vcc_sys>;
212         };
213 
214         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
215         vcc5v0_host: vcc5v0-host-regulator {
216                 compatible = "regulator-fixed";
217                 enable-active-high;
218                 gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
219                 pinctrl-names = "default";
220                 pinctrl-0 = <&vcc5v0_host_en>;
221                 regulator-name = "vcc5v0_host";
222                 regulator-always-on;
223                 vin-supply = <&vcc_sys>;
224         };
225 
226         vcc5v0_typec: vcc5v0-typec-regulator {
227                 compatible = "regulator-fixed";
228                 enable-active-high;
229                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
230                 pinctrl-names = "default";
231                 pinctrl-0 = <&vcc5v0_typec_en>;
232                 regulator-name = "vcc5v0_typec";
233                 regulator-always-on;
234                 vin-supply = <&vcc_sys>;
235         };
236 
237         vcc_sys: vcc-sys {
238                 compatible = "regulator-fixed";
239                 regulator-name = "vcc_sys";
240                 regulator-always-on;
241                 regulator-boot-on;
242                 regulator-min-microvolt = <5000000>;
243                 regulator-max-microvolt = <5000000>;
244                 vin-supply = <&dc_12v>;
245         };
246 
247         vdd_log: vdd-log {
248                 compatible = "pwm-regulator";
249                 pwms = <&pwm2 0 25000 1>;
250                 pwm-supply = <&vcc_sys>;
251                 regulator-name = "vdd_log";
252                 regulator-always-on;
253                 regulator-boot-on;
254                 regulator-min-microvolt = <430000>;
255                 regulator-max-microvolt = <1400000>;
256         };
257 };
258 
259 &cpu_l0 {
260         cpu-supply = <&vdd_cpu_l>;
261 };
262 
263 &cpu_l1 {
264         cpu-supply = <&vdd_cpu_l>;
265 };
266 
267 &cpu_l2 {
268         cpu-supply = <&vdd_cpu_l>;
269 };
270 
271 &cpu_l3 {
272         cpu-supply = <&vdd_cpu_l>;
273 };
274 
275 &cpu_b0 {
276         cpu-supply = <&vdd_cpu_b>;
277 };
278 
279 &cpu_b1 {
280         cpu-supply = <&vdd_cpu_b>;
281 };
282 
283 &emmc_phy {
284         status = "okay";
285 };
286 
287 &gmac {
288         assigned-clocks = <&cru SCLK_RMII_SRC>;
289         assigned-clock-parents = <&clkin_gmac>;
290         clock_in_out = "input";
291         phy-supply = <&vcc_lan>;
292         phy-mode = "rgmii";
293         pinctrl-names = "default";
294         pinctrl-0 = <&rgmii_pins>;
295         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
296         snps,reset-active-low;
297         snps,reset-delays-us = <0 10000 50000>;
298         tx_delay = <0x28>;
299         rx_delay = <0x11>;
300         status = "okay";
301 };
302 
303 &gpu {
304         mali-supply = <&vdd_gpu>;
305         status = "okay";
306 };
307 
308 &hdmi {
309         ddc-i2c-bus = <&i2c3>;
310         pinctrl-names = "default";
311         pinctrl-0 = <&hdmi_cec>;
312         status = "okay";
313 };
314 
315 &i2c0 {
316         clock-frequency = <400000>;
317         i2c-scl-rising-time-ns = <168>;
318         i2c-scl-falling-time-ns = <4>;
319         status = "okay";
320 
321         rk808: pmic@1b {
322                 compatible = "rockchip,rk808";
323                 reg = <0x1b>;
324                 interrupt-parent = <&gpio1>;
325                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
326                 #clock-cells = <1>;
327                 clock-output-names = "xin32k", "rk808-clkout2";
328                 pinctrl-names = "default";
329                 pinctrl-0 = <&pmic_int_l>;
330                 rockchip,system-power-controller;
331                 wakeup-source;
332 
333                 vcc1-supply = <&vcc_sys>;
334                 vcc2-supply = <&vcc_sys>;
335                 vcc3-supply = <&vcc_sys>;
336                 vcc4-supply = <&vcc_sys>;
337                 vcc6-supply = <&vcc_sys>;
338                 vcc7-supply = <&vcc_sys>;
339                 vcc8-supply = <&vcc3v3_sys>;
340                 vcc9-supply = <&vcc_sys>;
341                 vcc10-supply = <&vcc_sys>;
342                 vcc11-supply = <&vcc_sys>;
343                 vcc12-supply = <&vcc3v3_sys>;
344                 vddio-supply = <&vcc1v8_pmu>;
345 
346                 regulators {
347                         vdd_center: DCDC_REG1 {
348                                 regulator-name = "vdd_center";
349                                 regulator-always-on;
350                                 regulator-boot-on;
351                                 regulator-min-microvolt = <750000>;
352                                 regulator-max-microvolt = <1350000>;
353                                 regulator-ramp-delay = <6001>;
354                                 regulator-state-mem {
355                                         regulator-off-in-suspend;
356                                 };
357                         };
358 
359                         vdd_cpu_l: DCDC_REG2 {
360                                 regulator-name = "vdd_cpu_l";
361                                 regulator-always-on;
362                                 regulator-boot-on;
363                                 regulator-min-microvolt = <750000>;
364                                 regulator-max-microvolt = <1350000>;
365                                 regulator-ramp-delay = <6001>;
366                                 regulator-state-mem {
367                                         regulator-off-in-suspend;
368                                 };
369                         };
370 
371                         vcc_ddr: DCDC_REG3 {
372                                 regulator-name = "vcc_ddr";
373                                 regulator-always-on;
374                                 regulator-boot-on;
375                                 regulator-state-mem {
376                                         regulator-on-in-suspend;
377                                 };
378                         };
379 
380                         vcc_1v8: DCDC_REG4 {
381                                 regulator-name = "vcc_1v8";
382                                 regulator-always-on;
383                                 regulator-boot-on;
384                                 regulator-min-microvolt = <1800000>;
385                                 regulator-max-microvolt = <1800000>;
386                                 regulator-state-mem {
387                                         regulator-on-in-suspend;
388                                         regulator-suspend-microvolt = <1800000>;
389                                 };
390                         };
391 
392                         vcc1v8_dvp: LDO_REG1 {
393                                 regulator-name = "vcc1v8_dvp";
394                                 regulator-always-on;
395                                 regulator-boot-on;
396                                 regulator-min-microvolt = <1800000>;
397                                 regulator-max-microvolt = <1800000>;
398                                 regulator-state-mem {
399                                         regulator-off-in-suspend;
400                                 };
401                         };
402 
403                         vcc2v8_dvp: LDO_REG2 {
404                                 regulator-name = "vcc2v8_dvp";
405                                 regulator-always-on;
406                                 regulator-boot-on;
407                                 regulator-min-microvolt = <2800000>;
408                                 regulator-max-microvolt = <2800000>;
409                                 regulator-state-mem {
410                                         regulator-off-in-suspend;
411                                 };
412                         };
413 
414                         vcc1v8_pmu: LDO_REG3 {
415                                 regulator-name = "vcc1v8_pmu";
416                                 regulator-always-on;
417                                 regulator-boot-on;
418                                 regulator-min-microvolt = <1800000>;
419                                 regulator-max-microvolt = <1800000>;
420                                 regulator-state-mem {
421                                         regulator-on-in-suspend;
422                                         regulator-suspend-microvolt = <1800000>;
423                                 };
424                         };
425 
426                         vcc_sdio: LDO_REG4 {
427                                 regulator-name = "vcc_sdio";
428                                 regulator-always-on;
429                                 regulator-boot-on;
430                                 regulator-min-microvolt = <1800000>;
431                                 regulator-max-microvolt = <3000000>;
432                                 regulator-state-mem {
433                                         regulator-on-in-suspend;
434                                         regulator-suspend-microvolt = <3000000>;
435                                 };
436                         };
437 
438                         vcca3v0_codec: LDO_REG5 {
439                                 regulator-name = "vcca3v0_codec";
440                                 regulator-always-on;
441                                 regulator-boot-on;
442                                 regulator-min-microvolt = <3000000>;
443                                 regulator-max-microvolt = <3000000>;
444                                 regulator-state-mem {
445                                         regulator-off-in-suspend;
446                                 };
447                         };
448 
449                         vcc_1v5: LDO_REG6 {
450                                 regulator-name = "vcc_1v5";
451                                 regulator-always-on;
452                                 regulator-boot-on;
453                                 regulator-min-microvolt = <1500000>;
454                                 regulator-max-microvolt = <1500000>;
455                                 regulator-state-mem {
456                                         regulator-on-in-suspend;
457                                         regulator-suspend-microvolt = <1500000>;
458                                 };
459                         };
460 
461                         vcca1v8_codec: LDO_REG7 {
462                                 regulator-name = "vcca1v8_codec";
463                                 regulator-always-on;
464                                 regulator-boot-on;
465                                 regulator-min-microvolt = <1800000>;
466                                 regulator-max-microvolt = <1800000>;
467                                 regulator-state-mem {
468                                         regulator-off-in-suspend;
469                                 };
470                         };
471 
472                         vcc_3v0: LDO_REG8 {
473                                 regulator-name = "vcc_3v0";
474                                 regulator-always-on;
475                                 regulator-boot-on;
476                                 regulator-min-microvolt = <3000000>;
477                                 regulator-max-microvolt = <3000000>;
478                                 regulator-state-mem {
479                                         regulator-on-in-suspend;
480                                         regulator-suspend-microvolt = <3000000>;
481                                 };
482                         };
483 
484                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
485                                 regulator-name = "vcc3v3_s3";
486                                 regulator-always-on;
487                                 regulator-boot-on;
488                                 regulator-state-mem {
489                                         regulator-off-in-suspend;
490                                 };
491                         };
492 
493                         vcc3v3_s0: SWITCH_REG2 {
494                                 regulator-name = "vcc3v3_s0";
495                                 regulator-always-on;
496                                 regulator-boot-on;
497                                 regulator-state-mem {
498                                         regulator-off-in-suspend;
499                                 };
500                         };
501                 };
502         };
503 
504         vdd_cpu_b: regulator@40 {
505                 compatible = "silergy,syr827";
506                 reg = <0x40>;
507                 fcs,suspend-voltage-selector = <0>;
508                 regulator-name = "vdd_cpu_b";
509                 regulator-min-microvolt = <712500>;
510                 regulator-max-microvolt = <1500000>;
511                 regulator-ramp-delay = <1000>;
512                 regulator-always-on;
513                 regulator-boot-on;
514                 vin-supply = <&vcc_sys>;
515 
516                 regulator-state-mem {
517                         regulator-off-in-suspend;
518                 };
519         };
520 
521         vdd_gpu: regulator@41 {
522                 compatible = "silergy,syr828";
523                 reg = <0x41>;
524                 fcs,suspend-voltage-selector = <1>;
525                 regulator-name = "vdd_gpu";
526                 regulator-min-microvolt = <712500>;
527                 regulator-max-microvolt = <1500000>;
528                 regulator-ramp-delay = <1000>;
529                 regulator-always-on;
530                 regulator-boot-on;
531                 vin-supply = <&vcc_sys>;
532 
533                 regulator-state-mem {
534                         regulator-off-in-suspend;
535                 };
536         };
537 };
538 
539 &i2c1 {
540         i2c-scl-rising-time-ns = <300>;
541         i2c-scl-falling-time-ns = <15>;
542         status = "okay";
543 
544         rt5640: rt5640@1c {
545                 compatible = "realtek,rt5640";
546                 reg = <0x1c>;
547                 clocks = <&cru SCLK_I2S_8CH_OUT>;
548                 clock-names = "mclk";
549                 realtek,in1-differential;
550                 #sound-dai-cells = <0>;
551                 pinctrl-names = "default";
552                 pinctrl-0 = <&rt5640_hpcon>;
553         };
554 };
555 
556 &i2c3 {
557         i2c-scl-rising-time-ns = <450>;
558         i2c-scl-falling-time-ns = <15>;
559         status = "okay";
560 };
561 
562 &i2c4 {
563         i2c-scl-rising-time-ns = <600>;
564         i2c-scl-falling-time-ns = <20>;
565         status = "okay";
566 
567         fusb0: typec-portc@22 {
568                 compatible = "fcs,fusb302";
569                 reg = <0x22>;
570                 interrupt-parent = <&gpio1>;
571                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
572                 pinctrl-names = "default";
573                 pinctrl-0 = <&fusb0_int>;
574                 vbus-supply = <&vcc5v0_typec>;
575                 status = "okay";
576 
577                 connector {
578                         compatible = "usb-c-connector";
579                         data-role = "host";
580                         label = "USB-C";
581                         op-sink-microwatt = <1000000>;
582                         power-role = "dual";
583                         sink-pdos =
584                                 <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
585                         source-pdos =
586                                 <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
587                         try-power-role = "sink";
588 
589                         ports {
590                                 #address-cells = <1>;
591                                 #size-cells = <0>;
592 
593                                 port@0 {
594                                         reg = <0>;
595 
596                                         usbc_hs: endpoint {
597                                                 remote-endpoint =
598                                                         <&u2phy0_typec_hs>;
599                                         };
600                                 };
601 
602                                 port@1 {
603                                         reg = <1>;
604 
605                                         usbc_ss: endpoint {
606                                                 remote-endpoint =
607                                                         <&tcphy0_typec_ss>;
608                                         };
609                                 };
610                         };
611                 };
612         };
613 
614         accelerometer@68 {
615                 compatible = "invensense,mpu6500";
616                 reg = <0x68>;
617                 interrupt-parent = <&gpio1>;
618                 interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
619         };
620 };
621 
622 &i2s0 {
623         rockchip,playback-channels = <8>;
624         rockchip,capture-channels = <8>;
625         status = "okay";
626 };
627 
628 &i2s1 {
629         rockchip,playback-channels = <2>;
630         rockchip,capture-channels = <2>;
631         status = "okay";
632 };
633 
634 &i2s2 {
635         status = "okay";
636 };
637 
638 &io_domains {
639         status = "okay";
640 
641         bt656-supply = <&vcc1v8_dvp>;
642         audio-supply = <&vcca1v8_codec>;
643         sdmmc-supply = <&vcc_sdio>;
644         gpio1830-supply = <&vcc_3v0>;
645 };
646 
647 &pcie_phy {
648         status = "okay";
649 };
650 
651 &pcie0 {
652         ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
653         num-lanes = <4>;
654         pinctrl-names = "default";
655         pinctrl-0 = <&pcie_clkreqn_cpm>;
656         status = "okay";
657 };
658 
659 &pmu_io_domains {
660         pmu1830-supply = <&vcc_3v0>;
661         status = "okay";
662 };
663 
664 &pinctrl {
665         buttons {
666                 pwrbtn: pwrbtn {
667                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
668                 };
669         };
670 
671         fusb302x {
672                 fusb0_int: fusb0-int {
673                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
674                 };
675         };
676 
677         ir {
678                 ir_int: ir-int {
679                         rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
680                 };
681         };
682 
683         lcd-panel {
684                 lcd_panel_reset: lcd-panel-reset {
685                         rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
686                 };
687         };
688 
689         leds {
690                 work_led_pin: work-led-pin {
691                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
692                 };
693 
694                 diy_led_pin: diy-led-pin {
695                         rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
696                 };
697         };
698 
699         pcie {
700                 pcie_pwr_en: pcie-pwr-en {
701                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
702                 };
703 
704                 pcie_3g_drv: pcie-3g-drv {
705                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
706                 };
707         };
708 
709         pmic {
710                 pmic_int_l: pmic-int-l {
711                         rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
712                 };
713 
714                 vsel1_pin: vsel1-pin {
715                         rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
716                 };
717 
718                 vsel2_pin: vsel2-pin {
719                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
720                 };
721         };
722 
723         rt5640 {
724                 rt5640_hpcon: rt5640-hpcon {
725                         rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
726                 };
727         };
728 
729         sdio-pwrseq {
730                 wifi_enable_h: wifi-enable-h {
731                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
732                 };
733         };
734 
735         usb-typec {
736                 vcc5v0_typec_en: vcc5v0_typec_en {
737                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
738                 };
739         };
740 
741         usb2 {
742                 vcc5v0_host_en: vcc5v0-host-en {
743                         rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
744                 };
745         };
746 
747         wifi {
748                 wifi_host_wake_l: wifi-host-wake-l {
749                         rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
750                 };
751         };
752 };
753 
754 &pwm0 {
755         status = "okay";
756 };
757 
758 &pwm2 {
759         status = "okay";
760 };
761 
762 &saradc {
763         vref-supply = <&vcca1v8_s3>;
764         status = "okay";
765 };
766 
767 &sdio0 {
768         /* WiFi & BT combo module Ampak AP6356S */
769         bus-width = <4>;
770         cap-sdio-irq;
771         cap-sd-highspeed;
772         keep-power-in-suspend;
773         mmc-pwrseq = <&sdio_pwrseq>;
774         non-removable;
775         pinctrl-names = "default";
776         pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
777         sd-uhs-sdr104;
778 
779         /* Power supply */
780         vqmmc-supply = <&vcc1v8_s3>;    /* IO line */
781         vmmc-supply = <&vcc_sdio>;      /* card's power */
782 
783         #address-cells = <1>;
784         #size-cells = <0>;
785         status = "okay";
786 
787         brcmf: wifi@1 {
788                 reg = <1>;
789                 compatible = "brcm,bcm4329-fmac";
790                 interrupt-parent = <&gpio0>;
791                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
792                 interrupt-names = "host-wake";
793                 brcm,drive-strength = <5>;
794                 pinctrl-names = "default";
795                 pinctrl-0 = <&wifi_host_wake_l>;
796         };
797 };
798 
799 &sdmmc {
800         bus-width = <4>;
801         cap-mmc-highspeed;
802         cap-sd-highspeed;
803         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
804         disable-wp;
805         max-frequency = <150000000>;
806         pinctrl-names = "default";
807         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
808         status = "okay";
809 };
810 
811 &sdhci {
812         bus-width = <8>;
813         mmc-hs400-1_8v;
814         mmc-hs400-enhanced-strobe;
815         non-removable;
816         status = "okay";
817 };
818 
819 &spdif {
820         pinctrl-0 = <&spdif_bus_1>;
821         status = "okay";
822 
823         spdif_p0: port {
824                 spdif_p0_0: endpoint {
825                         remote-endpoint = <&dit_p0_0>;
826                 };
827         };
828 };
829 
830 &tcphy0 {
831         status = "okay";
832 };
833 
834 &tcphy0_usb3 {
835         port {
836                 tcphy0_typec_ss: endpoint {
837                         remote-endpoint = <&usbc_ss>;
838                 };
839         };
840 };
841 
842 &tcphy1 {
843         status = "okay";
844 };
845 
846 &tsadc {
847         /* tshut mode 0:CRU 1:GPIO */
848         rockchip,hw-tshut-mode = <1>;
849         /* tshut polarity 0:LOW 1:HIGH */
850         rockchip,hw-tshut-polarity = <1>;
851         status = "okay";
852 };
853 
854 &u2phy0 {
855         status = "okay";
856 
857         u2phy0_otg: otg-port {
858                 status = "okay";
859         };
860 
861         u2phy0_host: host-port {
862                 phy-supply = <&vcc5v0_host>;
863                 status = "okay";
864         };
865 
866         port {
867                 u2phy0_typec_hs: endpoint {
868                         remote-endpoint = <&usbc_hs>;
869                 };
870         };
871 };
872 
873 &u2phy1 {
874         status = "okay";
875 
876         u2phy1_otg: otg-port {
877                 status = "okay";
878         };
879 
880         u2phy1_host: host-port {
881                 phy-supply = <&vcc5v0_host>;
882                 status = "okay";
883         };
884 };
885 
886 &uart0 {
887         pinctrl-names = "default";
888         pinctrl-0 = <&uart0_xfer &uart0_cts>;
889         status = "okay";
890 };
891 
892 &uart2 {
893         status = "okay";
894 };
895 
896 &usb_host0_ehci {
897         status = "okay";
898 };
899 
900 &usb_host0_ohci {
901         status = "okay";
902 };
903 
904 &usb_host1_ehci {
905         status = "okay";
906 };
907 
908 &usb_host1_ohci {
909         status = "okay";
910 };
911 
912 &usbdrd3_0 {
913         status = "okay";
914 };
915 
916 &usbdrd_dwc3_0 {
917         status = "okay";
918         dr_mode = "otg";
919 };
920 
921 &usbdrd3_1 {
922         status = "okay";
923 };
924 
925 &usbdrd_dwc3_1 {
926         status = "okay";
927         dr_mode = "host";
928 };
929 
930 &vopb {
931         status = "okay";
932 };
933 
934 &vopb_mmu {
935         status = "okay";
936 };
937 
938 &vopl {
939         status = "okay";
940 };
941 
942 &vopl_mmu {
943         status = "okay";
944 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php