1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
5 */
6
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/pwm/pwm.h>
9 #include "rk3399.dtsi"
10 #include "rk3399-opp.dtsi"
11
12 / {
13 aliases {
14 ethernet0 = &gmac;
15 mmc0 = &sdio0;
16 mmc1 = &sdmmc;
17 mmc2 = &sdhci;
18 };
19
20 chosen {
21 stdout-path = "serial2:1500000n8";
22 };
23
24 /* enable for panel backlight support */
25 backlight: backlight {
26 compatible = "pwm-backlight";
27 brightness-levels = <0 4 8 16 32 64 128 255>;
28 default-brightness-level = <5>;
29 pwms = <&pwm0 0 1000000 0>;
30 status = "disabled";
31 };
32
33 clkin_gmac: external-gmac-clock {
34 compatible = "fixed-clock";
35 clock-frequency = <125000000>;
36 clock-output-names = "clkin_gmac";
37 #clock-cells = <0>;
38 };
39
40 gpio-keys {
41 compatible = "gpio-keys";
42 autorepeat;
43 pinctrl-names = "default";
44 pinctrl-0 = <&pwrbtn>;
45
46 key-power {
47 debounce-interval = <100>;
48 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
49 label = "GPIO Key Power";
50 linux,code = <KEY_POWER>;
51 wakeup-source;
52 };
53 };
54
55 ir-receiver {
56 compatible = "gpio-ir-receiver";
57 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
58 pinctrl-0 = <&ir_int>;
59 pinctrl-names = "default";
60 };
61
62 leds {
63 compatible = "gpio-leds";
64 pinctrl-names = "default";
65 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
66
67 work_led: led-0 {
68 label = "work";
69 default-state = "on";
70 gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
71 };
72
73 diy_led: led-1 {
74 label = "diy";
75 default-state = "off";
76 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
77 };
78 };
79
80 fan: pwm-fan {
81 compatible = "pwm-fan";
82 cooling-levels = <0 100 150 200 255>;
83 #cooling-cells = <2>;
84 fan-supply = <&vcc12v_dcin>;
85 pwms = <&pwm1 0 50000 0>;
86 };
87
88 sdio_pwrseq: sdio-pwrseq {
89 compatible = "mmc-pwrseq-simple";
90 clocks = <&rk808 1>;
91 clock-names = "ext_clock";
92 pinctrl-names = "default";
93 pinctrl-0 = <&wifi_enable_h>;
94 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
95 };
96
97 sound {
98 compatible = "audio-graph-card";
99 label = "Analog";
100 dais = <&i2s1_p0>;
101 };
102
103 sound-dit {
104 compatible = "audio-graph-card";
105 label = "SPDIF";
106 dais = <&spdif_p0>;
107 };
108
109 spdif-dit {
110 compatible = "linux,spdif-dit";
111 #sound-dai-cells = <0>;
112
113 port {
114 dit_p0_0: endpoint {
115 remote-endpoint = <&spdif_p0_0>;
116 };
117 };
118 };
119
120 avdd: avdd-regulator {
121 compatible = "regulator-fixed";
122 regulator-name = "avdd";
123 regulator-min-microvolt = <11000000>;
124 regulator-max-microvolt = <11000000>;
125 vin-supply = <&vcc3v3_s0>;
126 };
127
128 vcc12v_dcin: vcc12v-dcin {
129 compatible = "regulator-fixed";
130 regulator-name = "vcc12v_dcin";
131 regulator-always-on;
132 regulator-boot-on;
133 regulator-min-microvolt = <12000000>;
134 regulator-max-microvolt = <12000000>;
135 };
136
137 /* switched by pmic_sleep */
138 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
139 compatible = "regulator-fixed";
140 regulator-name = "vcc1v8_s3";
141 regulator-always-on;
142 regulator-boot-on;
143 regulator-min-microvolt = <1800000>;
144 regulator-max-microvolt = <1800000>;
145 vin-supply = <&vcc_1v8>;
146 };
147
148 /* micro SD card power */
149 vcc3v0_sd: vcc3v0-sd {
150 compatible = "regulator-fixed";
151 enable-active-high;
152 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
153 pinctrl-names = "default";
154 pinctrl-0 = <&sdmmc0_pwr_h>;
155 regulator-name = "vcc3v0_sd";
156 regulator-always-on;
157 regulator-min-microvolt = <3000000>;
158 regulator-max-microvolt = <3000000>;
159 vin-supply = <&vcc3v3_sys>;
160
161 regulator-state-mem {
162 regulator-off-in-suspend;
163 };
164 };
165
166 vcc3v3_pcie: vcc3v3-pcie-regulator {
167 compatible = "regulator-fixed";
168 enable-active-high;
169 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
170 pinctrl-names = "default";
171 pinctrl-0 = <&pcie_pwr_en>;
172 regulator-name = "vcc3v3_pcie";
173 regulator-always-on;
174 regulator-boot-on;
175 vin-supply = <&vcc12v_dcin>;
176 };
177
178 vcc3v3_sys: vcc3v3-sys {
179 compatible = "regulator-fixed";
180 regulator-name = "vcc3v3_sys";
181 regulator-always-on;
182 regulator-boot-on;
183 regulator-min-microvolt = <3300000>;
184 regulator-max-microvolt = <3300000>;
185 vin-supply = <&vcc5v0_sys>;
186 };
187
188 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
189 vcc5v0_host: vcc5v0-host-regulator {
190 compatible = "regulator-fixed";
191 enable-active-high;
192 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
193 pinctrl-names = "default";
194 pinctrl-0 = <&vcc5v0_host_en>;
195 regulator-name = "vcc5v0_host";
196 regulator-always-on;
197 vin-supply = <&vcc5v0_usb>;
198 };
199
200 vcc5v0_typec: vcc5v0-typec-regulator {
201 compatible = "regulator-fixed";
202 enable-active-high;
203 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&vcc5v0_typec_en>;
206 regulator-name = "vcc5v0_typec";
207 regulator-always-on;
208 vin-supply = <&vcc5v0_usb>;
209 };
210
211 vcc5v0_sys: vcc5v0-sys {
212 compatible = "regulator-fixed";
213 regulator-name = "vcc5v0_sys";
214 regulator-always-on;
215 regulator-boot-on;
216 regulator-min-microvolt = <5000000>;
217 regulator-max-microvolt = <5000000>;
218 vin-supply = <&vcc12v_dcin>;
219 };
220
221 vcc5v0_usb: vcc5v0-usb {
222 compatible = "regulator-fixed";
223 regulator-name = "vcc5v0_usb";
224 regulator-always-on;
225 regulator-boot-on;
226 regulator-min-microvolt = <5000000>;
227 regulator-max-microvolt = <5000000>;
228 vin-supply = <&vcc12v_dcin>;
229 };
230
231 vdd_log: vdd-log {
232 compatible = "pwm-regulator";
233 pwms = <&pwm2 0 25000 1>;
234 pwm-supply = <&vcc5v0_sys>;
235 regulator-name = "vdd_log";
236 regulator-always-on;
237 regulator-boot-on;
238 regulator-min-microvolt = <800000>;
239 regulator-max-microvolt = <1700000>;
240 };
241 };
242
243 &cpu_l0 {
244 cpu-supply = <&vdd_cpu_l>;
245 };
246
247 &cpu_l1 {
248 cpu-supply = <&vdd_cpu_l>;
249 };
250
251 &cpu_l2 {
252 cpu-supply = <&vdd_cpu_l>;
253 };
254
255 &cpu_l3 {
256 cpu-supply = <&vdd_cpu_l>;
257 };
258
259 &cpu_b0 {
260 cpu-supply = <&vdd_cpu_b>;
261 };
262
263 &cpu_b1 {
264 cpu-supply = <&vdd_cpu_b>;
265 };
266
267 &cpu_thermal {
268 trips {
269 cpu_warm: cpu_warm {
270 temperature = <55000>;
271 hysteresis = <2000>;
272 type = "active";
273 };
274
275 cpu_hot: cpu_hot {
276 temperature = <65000>;
277 hysteresis = <2000>;
278 type = "active";
279 };
280 };
281
282 cooling-maps {
283 map2 {
284 trip = <&cpu_warm>;
285 cooling-device = <&fan THERMAL_NO_LIMIT 1>;
286 };
287
288 map3 {
289 trip = <&cpu_hot>;
290 cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
291 };
292 };
293 };
294
295 &emmc_phy {
296 status = "okay";
297 };
298
299 &gmac {
300 assigned-clocks = <&cru SCLK_RMII_SRC>;
301 assigned-clock-parents = <&clkin_gmac>;
302 clock_in_out = "input";
303 phy-supply = <&vcc_lan>;
304 phy-mode = "rgmii";
305 pinctrl-names = "default";
306 pinctrl-0 = <&rgmii_pins>;
307 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
308 snps,reset-active-low;
309 snps,reset-delays-us = <0 10000 50000>;
310 tx_delay = <0x28>;
311 rx_delay = <0x11>;
312 status = "okay";
313 };
314
315 &hdmi {
316 ddc-i2c-bus = <&i2c3>;
317 pinctrl-names = "default";
318 pinctrl-0 = <&hdmi_cec>;
319 status = "okay";
320 };
321
322 &hdmi_sound {
323 status = "okay";
324 };
325
326 &gpu {
327 mali-supply = <&vdd_gpu>;
328 status = "okay";
329 };
330
331 &i2c0 {
332 clock-frequency = <400000>;
333 i2c-scl-rising-time-ns = <168>;
334 i2c-scl-falling-time-ns = <4>;
335 status = "okay";
336
337 rk808: pmic@1b {
338 compatible = "rockchip,rk808";
339 reg = <0x1b>;
340 interrupt-parent = <&gpio3>;
341 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
342 #clock-cells = <1>;
343 clock-output-names = "xin32k", "rk808-clkout2";
344 pinctrl-names = "default";
345 pinctrl-0 = <&pmic_int_l>;
346 rockchip,system-power-controller;
347 wakeup-source;
348
349 vcc1-supply = <&vcc5v0_sys>;
350 vcc2-supply = <&vcc5v0_sys>;
351 vcc3-supply = <&vcc5v0_sys>;
352 vcc4-supply = <&vcc5v0_sys>;
353 vcc6-supply = <&vcc5v0_sys>;
354 vcc7-supply = <&vcc5v0_sys>;
355 vcc8-supply = <&vcc3v3_sys>;
356 vcc9-supply = <&vcc5v0_sys>;
357 vcc10-supply = <&vcc5v0_sys>;
358 vcc11-supply = <&vcc5v0_sys>;
359 vcc12-supply = <&vcc3v3_sys>;
360 vddio-supply = <&vcca_1v8>;
361
362 regulators {
363 vdd_center: DCDC_REG1 {
364 regulator-name = "vdd_center";
365 regulator-always-on;
366 regulator-boot-on;
367 regulator-min-microvolt = <750000>;
368 regulator-max-microvolt = <1350000>;
369 regulator-ramp-delay = <6001>;
370 regulator-state-mem {
371 regulator-off-in-suspend;
372 };
373 };
374
375 vdd_cpu_l: DCDC_REG2 {
376 regulator-name = "vdd_cpu_l";
377 regulator-always-on;
378 regulator-boot-on;
379 regulator-min-microvolt = <750000>;
380 regulator-max-microvolt = <1350000>;
381 regulator-ramp-delay = <6001>;
382 regulator-state-mem {
383 regulator-off-in-suspend;
384 };
385 };
386
387 vcc_ddr: DCDC_REG3 {
388 regulator-name = "vcc_ddr";
389 regulator-always-on;
390 regulator-boot-on;
391 regulator-state-mem {
392 regulator-on-in-suspend;
393 };
394 };
395
396 vcc_1v8: DCDC_REG4 {
397 regulator-name = "vcc_1v8";
398 regulator-always-on;
399 regulator-boot-on;
400 regulator-min-microvolt = <1800000>;
401 regulator-max-microvolt = <1800000>;
402 regulator-state-mem {
403 regulator-on-in-suspend;
404 regulator-suspend-microvolt = <1800000>;
405 };
406 };
407
408 vcc1v8_dvp: LDO_REG1 {
409 regulator-name = "vcc1v8_dvp";
410 regulator-always-on;
411 regulator-boot-on;
412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvolt = <1800000>;
414 regulator-state-mem {
415 regulator-off-in-suspend;
416 };
417 };
418
419 vcc3v0_touch: LDO_REG2 {
420 regulator-name = "vcc3v0_touch";
421 regulator-min-microvolt = <3000000>;
422 regulator-max-microvolt = <3000000>;
423 regulator-state-mem {
424 regulator-off-in-suspend;
425 };
426 };
427
428 vcca_1v8: LDO_REG3 {
429 regulator-name = "vcca_1v8";
430 regulator-always-on;
431 regulator-boot-on;
432 regulator-min-microvolt = <1800000>;
433 regulator-max-microvolt = <1800000>;
434 regulator-state-mem {
435 regulator-on-in-suspend;
436 regulator-suspend-microvolt = <1800000>;
437 };
438 };
439
440 vcc_sdio: LDO_REG4 {
441 regulator-name = "vcc_sdio";
442 regulator-always-on;
443 regulator-boot-on;
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <3000000>;
446 regulator-state-mem {
447 regulator-on-in-suspend;
448 regulator-suspend-microvolt = <3000000>;
449 };
450 };
451
452 vcca3v0_codec: LDO_REG5 {
453 regulator-name = "vcca3v0_codec";
454 regulator-always-on;
455 regulator-boot-on;
456 regulator-min-microvolt = <3000000>;
457 regulator-max-microvolt = <3000000>;
458 regulator-state-mem {
459 regulator-off-in-suspend;
460 };
461 };
462
463 vcc_1v5: LDO_REG6 {
464 regulator-name = "vcc_1v5";
465 regulator-always-on;
466 regulator-boot-on;
467 regulator-min-microvolt = <1500000>;
468 regulator-max-microvolt = <1500000>;
469 regulator-state-mem {
470 regulator-on-in-suspend;
471 regulator-suspend-microvolt = <1500000>;
472 };
473 };
474
475 vcca1v8_codec: LDO_REG7 {
476 regulator-name = "vcca1v8_codec";
477 regulator-always-on;
478 regulator-boot-on;
479 regulator-min-microvolt = <1800000>;
480 regulator-max-microvolt = <1800000>;
481 regulator-state-mem {
482 regulator-off-in-suspend;
483 };
484 };
485
486 vcc_3v0: LDO_REG8 {
487 regulator-name = "vcc_3v0";
488 regulator-always-on;
489 regulator-boot-on;
490 regulator-min-microvolt = <3000000>;
491 regulator-max-microvolt = <3000000>;
492 regulator-state-mem {
493 regulator-on-in-suspend;
494 regulator-suspend-microvolt = <3000000>;
495 };
496 };
497
498 vcc3v3_s3: vcc_lan: SWITCH_REG1 {
499 regulator-name = "vcc3v3_s3";
500 regulator-always-on;
501 regulator-boot-on;
502 regulator-state-mem {
503 regulator-off-in-suspend;
504 };
505 };
506
507 vcc3v3_s0: SWITCH_REG2 {
508 regulator-name = "vcc3v3_s0";
509 regulator-state-mem {
510 regulator-off-in-suspend;
511 };
512 };
513 };
514 };
515
516 vdd_cpu_b: regulator@40 {
517 compatible = "silergy,syr827";
518 reg = <0x40>;
519 fcs,suspend-voltage-selector = <1>;
520 pinctrl-names = "default";
521 pinctrl-0 = <&vsel1_pin>;
522 regulator-name = "vdd_cpu_b";
523 regulator-min-microvolt = <712500>;
524 regulator-max-microvolt = <1500000>;
525 regulator-ramp-delay = <1000>;
526 regulator-always-on;
527 regulator-boot-on;
528 vin-supply = <&vcc5v0_sys>;
529
530 regulator-state-mem {
531 regulator-off-in-suspend;
532 };
533 };
534
535 vdd_gpu: regulator@41 {
536 compatible = "silergy,syr828";
537 reg = <0x41>;
538 fcs,suspend-voltage-selector = <1>;
539 pinctrl-names = "default";
540 pinctrl-0 = <&vsel2_pin>;
541 regulator-name = "vdd_gpu";
542 regulator-min-microvolt = <712500>;
543 regulator-max-microvolt = <1500000>;
544 regulator-ramp-delay = <1000>;
545 regulator-always-on;
546 regulator-boot-on;
547 vin-supply = <&vcc5v0_sys>;
548
549 regulator-state-mem {
550 regulator-off-in-suspend;
551 };
552 };
553 };
554
555 &i2c1 {
556 i2c-scl-rising-time-ns = <300>;
557 i2c-scl-falling-time-ns = <15>;
558 status = "okay";
559 };
560
561 &i2c3 {
562 i2c-scl-rising-time-ns = <450>;
563 i2c-scl-falling-time-ns = <15>;
564 status = "okay";
565 };
566
567 &i2c4 {
568 i2c-scl-rising-time-ns = <600>;
569 i2c-scl-falling-time-ns = <20>;
570 status = "okay";
571
572 fusb0: typec-portc@22 {
573 compatible = "fcs,fusb302";
574 reg = <0x22>;
575 interrupt-parent = <&gpio1>;
576 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
577 pinctrl-names = "default";
578 pinctrl-0 = <&fusb0_int>;
579 vbus-supply = <&vcc5v0_typec>;
580 status = "okay";
581 };
582
583 /* enable for pine64 touch screen support */
584 touch: touchscreen@5d {
585 compatible = "goodix,gt911";
586 reg = <0x5d>;
587 interrupt-parent = <&gpio4>;
588 interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
589 AVDD28-supply = <&vcc3v0_touch>;
590 VDDIO-supply = <&vcc3v0_touch>;
591 irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
592 reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
593 status = "disabled";
594 };
595 };
596
597 &i2s0 {
598 rockchip,playback-channels = <8>;
599 rockchip,capture-channels = <8>;
600 status = "okay";
601 };
602
603 &i2s1 {
604 rockchip,playback-channels = <2>;
605 rockchip,capture-channels = <2>;
606 status = "okay";
607
608 i2s1_p0: port {
609 i2s1_p0_0: endpoint {
610 dai-format = "i2s";
611 mclk-fs = <256>;
612 remote-endpoint = <&es8316_p0_0>;
613 };
614 };
615 };
616
617 &i2s2 {
618 status = "okay";
619 };
620
621 &io_domains {
622 status = "okay";
623
624 bt656-supply = <&vcc1v8_dvp>;
625 audio-supply = <&vcc_3v0>;
626 sdmmc-supply = <&vcc_sdio>;
627 gpio1830-supply = <&vcc_3v0>;
628 };
629
630 /* enable for pine64 panel display support */
631 &mipi_dsi {
632 clock-master;
633 status = "disabled";
634
635 ports {
636 mipi_out: port@1 {
637 reg = <1>;
638
639 mipi_out_panel: endpoint {
640 remote-endpoint = <&mipi_in_panel>;
641 };
642 };
643 };
644
645 mipi_panel: panel@0 {
646 compatible = "feiyang,fy07024di26a30d";
647 reg = <0>;
648 avdd-supply = <&avdd>;
649 backlight = <&backlight>;
650 dvdd-supply = <&vcc3v3_s0>;
651
652 port {
653 mipi_in_panel: endpoint {
654 remote-endpoint = <&mipi_out_panel>;
655 };
656 };
657 };
658 };
659
660 &pcie0 {
661 ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
662 num-lanes = <4>;
663 pinctrl-names = "default";
664 pinctrl-0 = <&pcie_perst>;
665 vpcie12v-supply = <&vcc12v_dcin>;
666 vpcie3v3-supply = <&vcc3v3_pcie>;
667 status = "okay";
668 };
669
670 &pcie_phy {
671 status = "okay";
672 };
673
674 &pmu_io_domains {
675 pmu1830-supply = <&vcc_3v0>;
676 status = "okay";
677 };
678
679 &pinctrl {
680 bt {
681 bt_enable_h: bt-enable-h {
682 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
683 };
684
685 bt_host_wake_l: bt-host-wake-l {
686 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
687 };
688
689 bt_wake_l: bt-wake-l {
690 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
691 };
692 };
693
694 buttons {
695 pwrbtn: pwrbtn {
696 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
697 };
698 };
699
700 fusb302x {
701 fusb0_int: fusb0-int {
702 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
703 };
704 };
705
706 ir {
707 ir_int: ir-int {
708 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
709 };
710 };
711
712 leds {
713 work_led_pin: work-led-pin {
714 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
715 };
716
717 diy_led_pin: diy-led-pin {
718 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
719 };
720 };
721
722 pcie {
723 pcie_perst: pcie-perst {
724 rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
725 };
726
727 pcie_pwr_en: pcie-pwr-en {
728 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
729 };
730 };
731
732 pmic {
733 pmic_int_l: pmic-int-l {
734 rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
735 };
736
737 vsel1_pin: vsel1-pin {
738 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
739 };
740
741 vsel2_pin: vsel2-pin {
742 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
743 };
744 };
745
746 sdcard {
747 sdmmc0_pwr_h: sdmmc0-pwr-h {
748 rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
749 };
750
751 };
752
753 sdio-pwrseq {
754 wifi_enable_h: wifi-enable-h {
755 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
756 };
757 };
758
759 usb-typec {
760 vcc5v0_typec_en: vcc5v0_typec_en {
761 rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
762 };
763 };
764
765 usb2 {
766 vcc5v0_host_en: vcc5v0-host-en {
767 rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
768 };
769 };
770 };
771
772 &pwm0 {
773 status = "okay";
774 };
775
776 &pwm1 {
777 status = "okay";
778 };
779
780 &pwm2 {
781 status = "okay";
782 };
783
784 &saradc {
785 vref-supply = <&vcca1v8_s3>;
786 status = "okay";
787 };
788
789 &sdio0 {
790 bus-width = <4>;
791 cap-sd-highspeed;
792 cap-sdio-irq;
793 disable-wp;
794 keep-power-in-suspend;
795 mmc-pwrseq = <&sdio_pwrseq>;
796 non-removable;
797 pinctrl-names = "default";
798 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
799 sd-uhs-sdr104;
800 status = "okay";
801 };
802
803 &sdmmc {
804 bus-width = <4>;
805 cap-sd-highspeed;
806 cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
807 disable-wp;
808 max-frequency = <150000000>;
809 pinctrl-names = "default";
810 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
811 vmmc-supply = <&vcc3v0_sd>;
812 vqmmc-supply = <&vcc_sdio>;
813 status = "okay";
814 };
815
816 &sdhci {
817 bus-width = <8>;
818 mmc-hs200-1_8v;
819 non-removable;
820 status = "okay";
821 };
822
823 &spdif {
824 pinctrl-0 = <&spdif_bus_1>;
825
826 spdif_p0: port {
827 spdif_p0_0: endpoint {
828 remote-endpoint = <&dit_p0_0>;
829 };
830 };
831 };
832
833 &spi1 {
834 status = "okay";
835
836 flash@0 {
837 compatible = "jedec,spi-nor";
838 reg = <0>;
839 spi-max-frequency = <10000000>;
840 };
841 };
842
843 &tcphy0 {
844 status = "okay";
845 };
846
847 &tcphy1 {
848 status = "okay";
849 };
850
851 &tsadc {
852 /* tshut mode 0:CRU 1:GPIO */
853 rockchip,hw-tshut-mode = <1>;
854 /* tshut polarity 0:LOW 1:HIGH */
855 rockchip,hw-tshut-polarity = <1>;
856 status = "okay";
857 };
858
859 &u2phy0 {
860 status = "okay";
861
862 u2phy0_otg: otg-port {
863 status = "okay";
864 };
865
866 u2phy0_host: host-port {
867 phy-supply = <&vcc5v0_host>;
868 status = "okay";
869 };
870 };
871
872 &u2phy1 {
873 status = "okay";
874
875 u2phy1_otg: otg-port {
876 status = "okay";
877 };
878
879 u2phy1_host: host-port {
880 phy-supply = <&vcc5v0_host>;
881 status = "okay";
882 };
883 };
884
885 &uart0 {
886 pinctrl-names = "default";
887 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
888 status = "okay";
889
890 bluetooth {
891 compatible = "brcm,bcm43438-bt";
892 clocks = <&rk808 1>;
893 clock-names = "lpo";
894 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
895 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
896 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
897 pinctrl-names = "default";
898 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
899 vbat-supply = <&vcc3v3_sys>;
900 vddio-supply = <&vcc_1v8>;
901 };
902 };
903
904 &uart2 {
905 status = "okay";
906 };
907
908 &usb_host0_ehci {
909 status = "okay";
910 };
911
912 &usb_host0_ohci {
913 status = "okay";
914 };
915
916 &usb_host1_ehci {
917 status = "okay";
918 };
919
920 &usb_host1_ohci {
921 status = "okay";
922 };
923
924 &usbdrd3_0 {
925 status = "okay";
926 };
927
928 &usbdrd_dwc3_0 {
929 status = "okay";
930 dr_mode = "host";
931 };
932
933 &usbdrd3_1 {
934 status = "okay";
935 };
936
937 &usbdrd_dwc3_1 {
938 status = "okay";
939 dr_mode = "host";
940 };
941
942 &vopb {
943 status = "okay";
944 };
945
946 &vopb_mmu {
947 status = "okay";
948 };
949
950 &vopl {
951 status = "okay";
952 };
953
954 &vopl_mmu {
955 status = "okay";
956 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.