~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi

Version: ~ [ linux-6.11.5 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.58 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.114 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.169 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.228 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.284 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.322 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
  2 /*
  3  * Device Tree file for the MCU domain peripherals shared by AM62P and J722S
  4  *
  5  * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
  6  */
  7 
  8 &cbass_mcu {
  9         mcu_pmx0: pinctrl@4084000 {
 10                 compatible = "pinctrl-single";
 11                 reg = <0x00 0x04084000 0x00 0x88>;
 12                 #pinctrl-cells = <1>;
 13                 pinctrl-single,register-width = <32>;
 14                 pinctrl-single,function-mask = <0xffffffff>;
 15                 pinctrl-single,gpio-range =
 16                         <&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>,
 17                         <&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>,
 18                         <&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>;
 19                 bootph-all;
 20 
 21                 mcu_pmx_range: gpio-range {
 22                         #pinctrl-single,gpio-range-cells = <3>;
 23                 };
 24         };
 25 
 26         mcu_esm: esm@4100000 {
 27                 compatible = "ti,j721e-esm";
 28                 reg = <0x00 0x4100000 0x00 0x1000>;
 29                 ti,esm-pins = <0>, <1>, <2>, <85>;
 30                 status = "reserved";
 31                 bootph-pre-ram;
 32         };
 33 
 34         /*
 35          * The MCU domain timer interrupts are routed only to the ESM module,
 36          * and not currently available for Linux. The MCU domain timers are
 37          * of limited use without interrupts, and likely reserved by the ESM.
 38          */
 39         mcu_timer0: timer@4800000 {
 40                 compatible = "ti,am654-timer";
 41                 reg = <0x00 0x4800000 0x00 0x400>;
 42                 clocks = <&k3_clks 35 2>;
 43                 clock-names = "fck";
 44                 power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
 45                 ti,timer-pwm;
 46                 status = "reserved";
 47         };
 48 
 49         mcu_timer1: timer@4810000 {
 50                 compatible = "ti,am654-timer";
 51                 reg = <0x00 0x4810000 0x00 0x400>;
 52                 clocks = <&k3_clks 48 2>;
 53                 clock-names = "fck";
 54                 power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
 55                 ti,timer-pwm;
 56                 status = "reserved";
 57         };
 58 
 59         mcu_timer2: timer@4820000 {
 60                 compatible = "ti,am654-timer";
 61                 reg = <0x00 0x4820000 0x00 0x400>;
 62                 clocks = <&k3_clks 49 2>;
 63                 clock-names = "fck";
 64                 power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
 65                 ti,timer-pwm;
 66                 status = "reserved";
 67         };
 68 
 69         mcu_timer3: timer@4830000 {
 70                 compatible = "ti,am654-timer";
 71                 reg = <0x00 0x4830000 0x00 0x400>;
 72                 clocks = <&k3_clks 50 2>;
 73                 clock-names = "fck";
 74                 power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
 75                 ti,timer-pwm;
 76                 status = "reserved";
 77         };
 78 
 79         mcu_uart0: serial@4a00000 {
 80                 compatible = "ti,am64-uart", "ti,am654-uart";
 81                 reg = <0x00 0x04a00000 0x00 0x100>;
 82                 interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 83                 power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
 84                 clocks = <&k3_clks 149 0>;
 85                 clock-names = "fclk";
 86                 status = "disabled";
 87         };
 88 
 89         mcu_i2c0: i2c@4900000 {
 90                 compatible = "ti,am64-i2c", "ti,omap4-i2c";
 91                 reg = <0x00 0x04900000 0x00 0x100>;
 92                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 93                 #address-cells = <1>;
 94                 #size-cells = <0>;
 95                 power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
 96                 clocks = <&k3_clks 106 2>;
 97                 clock-names = "fck";
 98                 status = "disabled";
 99         };
100 
101         mcu_spi0: spi@4b00000 {
102                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
103                 reg = <0x00 0x04b00000 0x00 0x400>;
104                 interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
105                 #address-cells = <1>;
106                 #size-cells = <0>;
107                 power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
108                 clocks = <&k3_clks 147 0>;
109                 status = "disabled";
110         };
111 
112         mcu_spi1: spi@4b10000 {
113                 compatible = "ti,am654-mcspi","ti,omap4-mcspi";
114                 reg = <0x00 0x04b10000 0x00 0x400>;
115                 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
116                 #address-cells = <1>;
117                 #size-cells = <0>;
118                 power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
119                 clocks = <&k3_clks 148 0>;
120                 status = "disabled";
121         };
122 
123         mcu_gpio_intr: interrupt-controller@4210000 {
124                 compatible = "ti,sci-intr";
125                 reg = <0x00 0x04210000 0x00 0x200>;
126                 ti,intr-trigger-type = <1>;
127                 interrupt-controller;
128                 interrupt-parent = <&gic500>;
129                 #interrupt-cells = <1>;
130                 ti,sci = <&dmsc>;
131                 ti,sci-dev-id = <5>;
132                 ti,interrupt-ranges = <0 104 4>;
133         };
134 
135         mcu_gpio0: gpio@4201000 {
136                 compatible = "ti,am64-gpio", "ti,keystone-gpio";
137                 reg = <0x00 0x4201000 0x00 0x100>;
138                 gpio-controller;
139                 #gpio-cells = <2>;
140                 interrupt-parent = <&mcu_gpio_intr>;
141                 interrupts = <30>, <31>;
142                 interrupt-controller;
143                 #interrupt-cells = <2>;
144                 ti,ngpio = <24>;
145                 ti,davinci-gpio-unbanked = <0>;
146                 power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
147                 clocks = <&k3_clks 79 0>;
148                 clock-names = "gpio";
149                 gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>,
150                               <&mcu_pmx0 22 32 2>;
151         };
152 
153         mcu_rti0: watchdog@4880000 {
154                 compatible = "ti,j7-rti-wdt";
155                 reg = <0x00 0x04880000 0x00 0x100>;
156                 clocks = <&k3_clks 131 0>;
157                 power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
158                 assigned-clocks = <&k3_clks 131 0>;
159                 assigned-clock-parents = <&k3_clks 131 2>;
160                 /* Tightly coupled to M4F */
161                 status = "reserved";
162         };
163 
164         mcu_mcan0: can@4e08000 {
165                 compatible = "bosch,m_can";
166                 reg = <0x00 0x4e08000 0x00 0x200>,
167                       <0x00 0x4e00000 0x00 0x8000>;
168                 reg-names = "m_can", "message_ram";
169                 power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
170                 clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
171                 clock-names = "hclk", "cclk";
172                 bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
173                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
174                              <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
175                 interrupt-names = "int0", "int1";
176                 status = "disabled";
177         };
178 
179         mcu_mcan1: can@4e18000 {
180                 compatible = "bosch,m_can";
181                 reg = <0x00 0x4e18000 0x00 0x200>,
182                       <0x00 0x4e10000 0x00 0x8000>;
183                 reg-names = "m_can", "message_ram";
184                 power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
185                 clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
186                 clock-names = "hclk", "cclk";
187                 bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
188                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
189                              <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
190                 interrupt-names = "int0", "int1";
191                 status = "disabled";
192         };
193 
194         mcu_r5fss0: r5fss@79000000 {
195                 compatible = "ti,am62-r5fss";
196                 #address-cells = <1>;
197                 #size-cells = <1>;
198                 ranges = <0x79000000 0x00 0x79000000 0x8000>,
199                          <0x79020000 0x00 0x79020000 0x8000>;
200                 power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
201                 status = "disabled";
202 
203                 mcu_r5fss0_core0: r5f@79000000 {
204                         compatible = "ti,am62-r5f";
205                         reg = <0x79000000 0x00008000>,
206                               <0x79020000 0x00008000>;
207                         reg-names = "atcm", "btcm";
208                         ti,sci = <&dmsc>;
209                         ti,sci-dev-id = <9>;
210                         ti,sci-proc-ids = <0x03 0xff>;
211                         resets = <&k3_reset 9 1>;
212                         firmware-name = "am62p-mcu-r5f0_0-fw";
213                         ti,atcm-enable = <0>;
214                         ti,btcm-enable = <1>;
215                         ti,loczrama = <0>;
216                 };
217         };
218 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php