~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi

Version: ~ [ linux-6.11.5 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.58 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.114 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.169 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.228 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.284 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.322 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
  2 /*
  3  * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals
  4  *
  5  * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
  6  */
  7 
  8 &cbass_mcu_wakeup {
  9         sms: system-controller@44083000 {
 10                 compatible = "ti,k2g-sci";
 11                 ti,host-id = <12>;
 12 
 13                 mbox-names = "rx", "tx";
 14 
 15                 mboxes = <&secure_proxy_main 11>,
 16                          <&secure_proxy_main 13>;
 17 
 18                 reg-names = "debug_messages";
 19                 reg = <0x00 0x44083000 0x00 0x1000>;
 20 
 21                 k3_pds: power-controller {
 22                         compatible = "ti,sci-pm-domain";
 23                         #power-domain-cells = <2>;
 24                 };
 25 
 26                 k3_clks: clock-controller {
 27                         compatible = "ti,k2g-sci-clk";
 28                         #clock-cells = <2>;
 29                 };
 30 
 31                 k3_reset: reset-controller {
 32                         compatible = "ti,sci-reset";
 33                         #reset-cells = <2>;
 34                 };
 35         };
 36 
 37         wkup_conf: bus@43000000 {
 38                 compatible = "simple-bus";
 39                 #address-cells = <1>;
 40                 #size-cells = <1>;
 41                 ranges = <0x0 0x00 0x43000000 0x20000>;
 42 
 43                 chipid: chipid@14 {
 44                         compatible = "ti,am654-chipid";
 45                         reg = <0x14 0x4>;
 46                 };
 47         };
 48 
 49         secure_proxy_sa3: mailbox@43600000 {
 50                 compatible = "ti,am654-secure-proxy";
 51                 #mbox-cells = <1>;
 52                 reg-names = "target_data", "rt", "scfg";
 53                 reg = <0x00 0x43600000 0x00 0x10000>,
 54                       <0x00 0x44880000 0x00 0x20000>,
 55                       <0x00 0x44860000 0x00 0x20000>;
 56                 /*
 57                  * Marked Disabled:
 58                  * Node is incomplete as it is meant for bootloaders and
 59                  * firmware on non-MPU processors
 60                  */
 61                 status = "disabled";
 62         };
 63 
 64         mcu_ram: sram@41c00000 {
 65                 compatible = "mmio-sram";
 66                 reg = <0x00 0x41c00000 0x00 0x100000>;
 67                 ranges = <0x00 0x00 0x41c00000 0x100000>;
 68                 #address-cells = <1>;
 69                 #size-cells = <1>;
 70         };
 71 
 72         wkup_pmx0: pinctrl@4301c000 {
 73                 compatible = "pinctrl-single";
 74                 /* Proxy 0 addressing */
 75                 reg = <0x00 0x4301c000 0x00 0x034>;
 76                 #pinctrl-cells = <1>;
 77                 pinctrl-single,register-width = <32>;
 78                 pinctrl-single,function-mask = <0xffffffff>;
 79         };
 80 
 81         wkup_pmx1: pinctrl@4301c038 {
 82                 compatible = "pinctrl-single";
 83                 /* Proxy 0 addressing */
 84                 reg = <0x00 0x4301c038 0x00 0x02C>;
 85                 #pinctrl-cells = <1>;
 86                 pinctrl-single,register-width = <32>;
 87                 pinctrl-single,function-mask = <0xffffffff>;
 88         };
 89 
 90         wkup_pmx2: pinctrl@4301c068 {
 91                 compatible = "pinctrl-single";
 92                 /* Proxy 0 addressing */
 93                 reg = <0x00 0x4301c068 0x00 0x120>;
 94                 #pinctrl-cells = <1>;
 95                 pinctrl-single,register-width = <32>;
 96                 pinctrl-single,function-mask = <0xffffffff>;
 97         };
 98 
 99         wkup_pmx3: pinctrl@4301c190 {
100                 compatible = "pinctrl-single";
101                 /* Proxy 0 addressing */
102                 reg = <0x00 0x4301c190 0x00 0x004>;
103                 #pinctrl-cells = <1>;
104                 pinctrl-single,register-width = <32>;
105                 pinctrl-single,function-mask = <0xffffffff>;
106         };
107 
108         /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
109         mcu_timerio_input: pinctrl@40f04200 {
110                 compatible = "pinctrl-single";
111                 reg = <0x00 0x40f04200 0x00 0x28>;
112                 #pinctrl-cells = <1>;
113                 pinctrl-single,register-width = <32>;
114                 pinctrl-single,function-mask = <0x0000000f>;
115                 /* Non-MPU Firmware usage */
116                 status = "reserved";
117         };
118 
119         /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
120         mcu_timerio_output: pinctrl@40f04280 {
121                 compatible = "pinctrl-single";
122                 reg = <0x00 0x40f04280 0x00 0x28>;
123                 #pinctrl-cells = <1>;
124                 pinctrl-single,register-width = <32>;
125                 pinctrl-single,function-mask = <0x0000000f>;
126                 /* Non-MPU Firmware usage */
127                 status = "reserved";
128         };
129 
130         wkup_gpio_intr: interrupt-controller@42200000 {
131                 compatible = "ti,sci-intr";
132                 reg = <0x00 0x42200000 0x00 0x400>;
133                 ti,intr-trigger-type = <1>;
134                 interrupt-controller;
135                 interrupt-parent = <&gic500>;
136                 #interrupt-cells = <1>;
137                 ti,sci = <&sms>;
138                 ti,sci-dev-id = <125>;
139                 ti,interrupt-ranges = <16 960 16>;
140         };
141 
142         mcu_conf: bus@40f00000 {
143                 compatible = "simple-bus";
144                 #address-cells = <1>;
145                 #size-cells = <1>;
146                 ranges = <0x0 0x0 0x40f00000 0x20000>;
147 
148                 cpsw_mac_syscon: ethernet-mac-syscon@200 {
149                         compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
150                         reg = <0x200 0x8>;
151                 };
152 
153                 phy_gmii_sel: phy@4040 {
154                         compatible = "ti,am654-phy-gmii-sel";
155                         reg = <0x4040 0x4>;
156                         #phy-cells = <1>;
157                 };
158 
159         };
160 
161         mcu_timer0: timer@40400000 {
162                 compatible = "ti,am654-timer";
163                 reg = <0x00 0x40400000 0x00 0x400>;
164                 interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
165                 clocks = <&k3_clks 35 1>;
166                 clock-names = "fck";
167                 assigned-clocks = <&k3_clks 35 1>;
168                 assigned-clock-parents = <&k3_clks 35 2>;
169                 power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
170                 ti,timer-pwm;
171                 /* Non-MPU Firmware usage */
172                 status = "reserved";
173         };
174 
175         mcu_timer1: timer@40410000 {
176                 compatible = "ti,am654-timer";
177                 reg = <0x00 0x40410000 0x00 0x400>;
178                 interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
179                 clocks = <&k3_clks 83 1>;
180                 clock-names = "fck";
181                 assigned-clocks = <&k3_clks 83 1>;
182                 assigned-clock-parents = <&k3_clks 83 2>;
183                 power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
184                 ti,timer-pwm;
185                 /* Non-MPU Firmware usage */
186                 status = "reserved";
187         };
188 
189         mcu_timer2: timer@40420000 {
190                 compatible = "ti,am654-timer";
191                 reg = <0x00 0x40420000 0x00 0x400>;
192                 interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
193                 clocks = <&k3_clks 84 1>;
194                 clock-names = "fck";
195                 assigned-clocks = <&k3_clks 84 1>;
196                 assigned-clock-parents = <&k3_clks 84 2>;
197                 power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
198                 ti,timer-pwm;
199                 /* Non-MPU Firmware usage */
200                 status = "reserved";
201         };
202 
203         mcu_timer3: timer@40430000 {
204                 compatible = "ti,am654-timer";
205                 reg = <0x00 0x40430000 0x00 0x400>;
206                 interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
207                 clocks = <&k3_clks 85 1>;
208                 clock-names = "fck";
209                 assigned-clocks = <&k3_clks 85 1>;
210                 assigned-clock-parents = <&k3_clks 85 2>;
211                 power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
212                 ti,timer-pwm;
213                 /* Non-MPU Firmware usage */
214                 status = "reserved";
215         };
216 
217         mcu_timer4: timer@40440000 {
218                 compatible = "ti,am654-timer";
219                 reg = <0x00 0x40440000 0x00 0x400>;
220                 interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
221                 clocks = <&k3_clks 86 1>;
222                 clock-names = "fck";
223                 assigned-clocks = <&k3_clks 86 1>;
224                 assigned-clock-parents = <&k3_clks 86 2>;
225                 power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
226                 ti,timer-pwm;
227                 /* Non-MPU Firmware usage */
228                 status = "reserved";
229         };
230 
231         mcu_timer5: timer@40450000 {
232                 compatible = "ti,am654-timer";
233                 reg = <0x00 0x40450000 0x00 0x400>;
234                 interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
235                 clocks = <&k3_clks 87 1>;
236                 clock-names = "fck";
237                 assigned-clocks = <&k3_clks 87 1>;
238                 assigned-clock-parents = <&k3_clks 87 2>;
239                 power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
240                 ti,timer-pwm;
241                 /* Non-MPU Firmware usage */
242                 status = "reserved";
243         };
244 
245         mcu_timer6: timer@40460000 {
246                 compatible = "ti,am654-timer";
247                 reg = <0x00 0x40460000 0x00 0x400>;
248                 interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
249                 clocks = <&k3_clks 88 1>;
250                 clock-names = "fck";
251                 assigned-clocks = <&k3_clks 88 1>;
252                 assigned-clock-parents = <&k3_clks 88 2>;
253                 power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
254                 ti,timer-pwm;
255                 /* Non-MPU Firmware usage */
256                 status = "reserved";
257         };
258 
259         mcu_timer7: timer@40470000 {
260                 compatible = "ti,am654-timer";
261                 reg = <0x00 0x40470000 0x00 0x400>;
262                 interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
263                 clocks = <&k3_clks 89 1>;
264                 clock-names = "fck";
265                 assigned-clocks = <&k3_clks 89 1>;
266                 assigned-clock-parents = <&k3_clks 89 2>;
267                 power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
268                 ti,timer-pwm;
269                 /* Non-MPU Firmware usage */
270                 status = "reserved";
271         };
272 
273         mcu_timer8: timer@40480000 {
274                 compatible = "ti,am654-timer";
275                 reg = <0x00 0x40480000 0x00 0x400>;
276                 interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
277                 clocks = <&k3_clks 90 1>;
278                 clock-names = "fck";
279                 assigned-clocks = <&k3_clks 90 1>;
280                 assigned-clock-parents = <&k3_clks 90 2>;
281                 power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
282                 ti,timer-pwm;
283                 /* Non-MPU Firmware usage */
284                 status = "reserved";
285         };
286 
287         mcu_timer9: timer@40490000 {
288                 compatible = "ti,am654-timer";
289                 reg = <0x00 0x40490000 0x00 0x400>;
290                 interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
291                 clocks = <&k3_clks 91 1>;
292                 clock-names = "fck";
293                 assigned-clocks = <&k3_clks 91 1>;
294                 assigned-clock-parents = <&k3_clks 91 2>;
295                 power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
296                 ti,timer-pwm;
297                 /* Non-MPU Firmware usage */
298                 status = "reserved";
299         };
300 
301         wkup_uart0: serial@42300000 {
302                 compatible = "ti,j721e-uart", "ti,am654-uart";
303                 reg = <0x00 0x42300000 0x00 0x200>;
304                 interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
305                 clocks = <&k3_clks 359 3>;
306                 clock-names = "fclk";
307                 power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
308                 status = "disabled";
309         };
310 
311         mcu_uart0: serial@40a00000 {
312                 compatible = "ti,j721e-uart", "ti,am654-uart";
313                 reg = <0x00 0x40a00000 0x00 0x200>;
314                 interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
315                 clocks = <&k3_clks 149 3>;
316                 clock-names = "fclk";
317                 power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
318                 status = "disabled";
319         };
320 
321         wkup_gpio0: gpio@42110000 {
322                 compatible = "ti,j721e-gpio", "ti,keystone-gpio";
323                 reg = <0x00 0x42110000 0x00 0x100>;
324                 gpio-controller;
325                 #gpio-cells = <2>;
326                 interrupt-parent = <&wkup_gpio_intr>;
327                 interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
328                 interrupt-controller;
329                 #interrupt-cells = <2>;
330                 ti,ngpio = <89>;
331                 ti,davinci-gpio-unbanked = <0>;
332                 power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
333                 clocks = <&k3_clks 115 0>;
334                 clock-names = "gpio";
335                 status = "disabled";
336         };
337 
338         wkup_gpio1: gpio@42100000 {
339                 compatible = "ti,j721e-gpio", "ti,keystone-gpio";
340                 reg = <0x00 0x42100000 0x00 0x100>;
341                 gpio-controller;
342                 #gpio-cells = <2>;
343                 interrupt-parent = <&wkup_gpio_intr>;
344                 interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
345                 interrupt-controller;
346                 #interrupt-cells = <2>;
347                 ti,ngpio = <89>;
348                 ti,davinci-gpio-unbanked = <0>;
349                 power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
350                 clocks = <&k3_clks 116 0>;
351                 clock-names = "gpio";
352                 status = "disabled";
353         };
354 
355         wkup_i2c0: i2c@42120000 {
356                 compatible = "ti,j721e-i2c", "ti,omap4-i2c";
357                 reg = <0x00 0x42120000 0x00 0x100>;
358                 interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
359                 #address-cells = <1>;
360                 #size-cells = <0>;
361                 clocks = <&k3_clks 223 1>;
362                 clock-names = "fck";
363                 power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
364                 status = "disabled";
365         };
366 
367         mcu_i2c0: i2c@40b00000 {
368                 compatible = "ti,j721e-i2c", "ti,omap4-i2c";
369                 reg = <0x00 0x40b00000 0x00 0x100>;
370                 interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
371                 #address-cells = <1>;
372                 #size-cells = <0>;
373                 clocks = <&k3_clks 221 1>;
374                 clock-names = "fck";
375                 power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
376                 status = "disabled";
377         };
378 
379         mcu_i2c1: i2c@40b10000 {
380                 compatible = "ti,j721e-i2c", "ti,omap4-i2c";
381                 reg = <0x00 0x40b10000 0x00 0x100>;
382                 interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
383                 #address-cells = <1>;
384                 #size-cells = <0>;
385                 clocks = <&k3_clks 222 1>;
386                 clock-names = "fck";
387                 power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
388                 status = "disabled";
389         };
390 
391         mcu_mcan0: can@40528000 {
392                 compatible = "bosch,m_can";
393                 reg = <0x00 0x40528000 0x00 0x200>,
394                       <0x00 0x40500000 0x00 0x8000>;
395                 reg-names = "m_can", "message_ram";
396                 power-domains = <&k3_pds 207 TI_SCI_PD_EXCLUSIVE>;
397                 clocks = <&k3_clks 207 0>, <&k3_clks 207 1>;
398                 clock-names = "hclk", "cclk";
399                 interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
400                              <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
401                 interrupt-names = "int0", "int1";
402                 bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
403                 status = "disabled";
404         };
405 
406         mcu_mcan1: can@40568000 {
407                 compatible = "bosch,m_can";
408                 reg = <0x00 0x40568000 0x00 0x200>,
409                       <0x00 0x40540000 0x00 0x8000>;
410                 reg-names = "m_can", "message_ram";
411                 power-domains = <&k3_pds 208 TI_SCI_PD_EXCLUSIVE>;
412                 clocks = <&k3_clks 208 0>, <&k3_clks 208 1>;
413                 clock-names = "hclk", "cclk";
414                 interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
415                              <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
416                 interrupt-names = "int0", "int1";
417                 bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
418                 status = "disabled";
419         };
420 
421         mcu_spi0: spi@40300000 {
422                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
423                 reg = <0x00 0x040300000 0x00 0x400>;
424                 interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
425                 #address-cells = <1>;
426                 #size-cells = <0>;
427                 power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
428                 clocks = <&k3_clks 347 0>;
429                 status = "disabled";
430         };
431 
432         mcu_spi1: spi@40310000 {
433                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
434                 reg = <0x00 0x040310000 0x00 0x400>;
435                 interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
436                 #address-cells = <1>;
437                 #size-cells = <0>;
438                 power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
439                 clocks = <&k3_clks 348 0>;
440                 status = "disabled";
441         };
442 
443         mcu_spi2: spi@40320000 {
444                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
445                 reg = <0x00 0x040320000 0x00 0x400>;
446                 interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
447                 #address-cells = <1>;
448                 #size-cells = <0>;
449                 power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
450                 clocks = <&k3_clks 349 0>;
451                 status = "disabled";
452         };
453 
454         mcu_navss: bus@28380000 {
455                 compatible = "simple-bus";
456                 #address-cells = <2>;
457                 #size-cells = <2>;
458                 ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
459                 dma-coherent;
460                 dma-ranges;
461 
462                 ti,sci-dev-id = <267>;
463 
464                 mcu_ringacc: ringacc@2b800000 {
465                         compatible = "ti,am654-navss-ringacc";
466                         reg = <0x0 0x2b800000 0x0 0x400000>,
467                               <0x0 0x2b000000 0x0 0x400000>,
468                               <0x0 0x28590000 0x0 0x100>,
469                               <0x0 0x2a500000 0x0 0x40000>,
470                               <0x0 0x28440000 0x0 0x40000>;
471                         reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
472                         ti,num-rings = <286>;
473                         ti,sci-rm-range-gp-rings = <0x1>;
474                         ti,sci = <&sms>;
475                         ti,sci-dev-id = <272>;
476                         msi-parent = <&main_udmass_inta>;
477                 };
478 
479                 mcu_udmap: dma-controller@285c0000 {
480                         compatible = "ti,j721e-navss-mcu-udmap";
481                         reg = <0x0 0x285c0000 0x0 0x100>,
482                               <0x0 0x2a800000 0x0 0x40000>,
483                               <0x0 0x2aa00000 0x0 0x40000>,
484                               <0x0 0x284a0000 0x0 0x4000>,
485                               <0x0 0x284c0000 0x0 0x4000>,
486                               <0x0 0x28400000 0x0 0x2000>;
487                         reg-names = "gcfg", "rchanrt", "tchanrt",
488                                     "tchan", "rchan", "rflow";
489                         msi-parent = <&main_udmass_inta>;
490                         #dma-cells = <1>;
491 
492                         ti,sci = <&sms>;
493                         ti,sci-dev-id = <273>;
494                         ti,ringacc = <&mcu_ringacc>;
495                         ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
496                                                 <0x0f>; /* TX_HCHAN */
497                         ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
498                                                 <0x0b>; /* RX_HCHAN */
499                         ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
500                 };
501         };
502 
503         secure_proxy_mcu: mailbox@2a480000 {
504                 compatible = "ti,am654-secure-proxy";
505                 #mbox-cells = <1>;
506                 reg-names = "target_data", "rt", "scfg";
507                 reg = <0x00 0x2a480000 0x00 0x80000>,
508                       <0x00 0x2a380000 0x00 0x80000>,
509                       <0x00 0x2a400000 0x00 0x80000>;
510                 /*
511                  * Marked Disabled:
512                  * Node is incomplete as it is meant for bootloaders and
513                  * firmware on non-MPU processors
514                  */
515                 status = "disabled";
516         };
517 
518         mcu_cpsw: ethernet@46000000 {
519                 compatible = "ti,j721e-cpsw-nuss";
520                 #address-cells = <2>;
521                 #size-cells = <2>;
522                 reg = <0x0 0x46000000 0x0 0x200000>;
523                 reg-names = "cpsw_nuss";
524                 ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
525                 dma-coherent;
526                 clocks = <&k3_clks 29 28>;
527                 clock-names = "fck";
528                 power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
529 
530                 dmas = <&mcu_udmap 0xf000>,
531                        <&mcu_udmap 0xf001>,
532                        <&mcu_udmap 0xf002>,
533                        <&mcu_udmap 0xf003>,
534                        <&mcu_udmap 0xf004>,
535                        <&mcu_udmap 0xf005>,
536                        <&mcu_udmap 0xf006>,
537                        <&mcu_udmap 0xf007>,
538                        <&mcu_udmap 0x7000>;
539                 dma-names = "tx0", "tx1", "tx2", "tx3",
540                             "tx4", "tx5", "tx6", "tx7",
541                             "rx";
542 
543                 ethernet-ports {
544                         #address-cells = <1>;
545                         #size-cells = <0>;
546 
547                         cpsw_port1: port@1 {
548                                 reg = <1>;
549                                 ti,mac-only;
550                                 label = "port1";
551                                 ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
552                                 phys = <&phy_gmii_sel 1>;
553                         };
554                 };
555 
556                 davinci_mdio: mdio@f00 {
557                         compatible = "ti,cpsw-mdio","ti,davinci_mdio";
558                         reg = <0x0 0xf00 0x0 0x100>;
559                         #address-cells = <1>;
560                         #size-cells = <0>;
561                         clocks = <&k3_clks 29 28>;
562                         clock-names = "fck";
563                         bus_freq = <1000000>;
564                 };
565 
566                 cpts@3d000 {
567                         compatible = "ti,am65-cpts";
568                         reg = <0x0 0x3d000 0x0 0x400>;
569                         clocks = <&k3_clks 29 3>;
570                         clock-names = "cpts";
571                         assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */
572                         assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */
573                         interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
574                         interrupt-names = "cpts";
575                         ti,cpts-ext-ts-inputs = <4>;
576                         ti,cpts-periodic-outputs = <2>;
577                 };
578         };
579 
580         tscadc0: tscadc@40200000 {
581                 compatible = "ti,am3359-tscadc";
582                 reg = <0x00 0x40200000 0x00 0x1000>;
583                 interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
584                 power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
585                 clocks = <&k3_clks 0 0>;
586                 assigned-clocks = <&k3_clks 0 2>;
587                 assigned-clock-rates = <60000000>;
588                 clock-names = "fck";
589                 dmas = <&main_udmap 0x7400>,
590                         <&main_udmap 0x7401>;
591                 dma-names = "fifo0", "fifo1";
592                 status = "disabled";
593 
594                 adc {
595                         #io-channel-cells = <1>;
596                         compatible = "ti,am3359-adc";
597                 };
598         };
599 
600         tscadc1: tscadc@40210000 {
601                 compatible = "ti,am3359-tscadc";
602                 reg = <0x00 0x40210000 0x00 0x1000>;
603                 interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
604                 power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
605                 clocks = <&k3_clks 1 0>;
606                 assigned-clocks = <&k3_clks 1 2>;
607                 assigned-clock-rates = <60000000>;
608                 clock-names = "fck";
609                 dmas = <&main_udmap 0x7402>,
610                         <&main_udmap 0x7403>;
611                 dma-names = "fifo0", "fifo1";
612                 status = "disabled";
613 
614                 adc {
615                         #io-channel-cells = <1>;
616                         compatible = "ti,am3359-adc";
617                 };
618         };
619 
620         fss: bus@47000000 {
621                 compatible = "simple-bus";
622                 #address-cells = <2>;
623                 #size-cells = <2>;
624                 ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
625                          <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
626                          <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
627 
628                 ospi0: spi@47040000 {
629                         compatible = "ti,am654-ospi", "cdns,qspi-nor";
630                         reg = <0x00 0x47040000 0x00 0x100>,
631                               <0x05 0x00000000 0x01 0x00000000>;
632                         interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
633                         cdns,fifo-depth = <256>;
634                         cdns,fifo-width = <4>;
635                         cdns,trigger-address = <0x0>;
636                         clocks = <&k3_clks 109 5>;
637                         assigned-clocks = <&k3_clks 109 5>;
638                         assigned-clock-parents = <&k3_clks 109 7>;
639                         assigned-clock-rates = <166666666>;
640                         power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
641                         #address-cells = <1>;
642                         #size-cells = <0>;
643 
644                         status = "disabled"; /* Needs pinmux */
645                 };
646 
647                 ospi1: spi@47050000 {
648                         compatible = "ti,am654-ospi", "cdns,qspi-nor";
649                         reg = <0x00 0x47050000 0x00 0x100>,
650                               <0x07 0x00000000 0x01 0x00000000>;
651                         interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
652                         cdns,fifo-depth = <256>;
653                         cdns,fifo-width = <4>;
654                         cdns,trigger-address = <0x0>;
655                         clocks = <&k3_clks 110 5>;
656                         power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
657                         #address-cells = <1>;
658                         #size-cells = <0>;
659 
660                         status = "disabled"; /* Needs pinmux */
661                 };
662         };
663 
664         wkup_vtm0: temperature-sensor@42040000 {
665                 compatible = "ti,j7200-vtm";
666                 reg = <0x00 0x42040000 0x0 0x350>,
667                       <0x00 0x42050000 0x0 0x350>;
668                 power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>;
669                 #thermal-sensor-cells = <1>;
670         };
671 
672         mcu_r5fss0: r5fss@41000000 {
673                 compatible = "ti,j721s2-r5fss";
674                 ti,cluster-mode = <1>;
675                 #address-cells = <1>;
676                 #size-cells = <1>;
677                 ranges = <0x41000000 0x00 0x41000000 0x20000>,
678                          <0x41400000 0x00 0x41400000 0x20000>;
679                 power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
680 
681                 mcu_r5fss0_core0: r5f@41000000 {
682                         compatible = "ti,j721s2-r5f";
683                         reg = <0x41000000 0x00010000>,
684                               <0x41010000 0x00010000>;
685                         reg-names = "atcm", "btcm";
686                         ti,sci = <&sms>;
687                         ti,sci-dev-id = <284>;
688                         ti,sci-proc-ids = <0x01 0xff>;
689                         resets = <&k3_reset 284 1>;
690                         firmware-name = "j721s2-mcu-r5f0_0-fw";
691                         ti,atcm-enable = <1>;
692                         ti,btcm-enable = <1>;
693                         ti,loczrama = <1>;
694                 };
695 
696                 mcu_r5fss0_core1: r5f@41400000 {
697                         compatible = "ti,j721s2-r5f";
698                         reg = <0x41400000 0x00010000>,
699                               <0x41410000 0x00010000>;
700                         reg-names = "atcm", "btcm";
701                         ti,sci = <&sms>;
702                         ti,sci-dev-id = <285>;
703                         ti,sci-proc-ids = <0x02 0xff>;
704                         resets = <&k3_reset 285 1>;
705                         firmware-name = "j721s2-mcu-r5f0_1-fw";
706                         ti,atcm-enable = <1>;
707                         ti,btcm-enable = <1>;
708                         ti,loczrama = <1>;
709                 };
710         };
711 
712         mcu_esm: esm@40800000 {
713                 compatible = "ti,j721e-esm";
714                 reg = <0x00 0x40800000 0x00 0x1000>;
715                 ti,esm-pins = <95>;
716                 bootph-pre-ram;
717         };
718 
719         wkup_esm: esm@42080000 {
720                 compatible = "ti,j721e-esm";
721                 reg = <0x00 0x42080000 0x00 0x1000>;
722                 ti,esm-pins = <63>;
723                 bootph-pre-ram;
724         };
725 
726         /*
727          * The 2 RTI instances are couple with MCU R5Fs so keeping them
728          * reserved as these will be used by their respective firmware
729          */
730         mcu_watchdog0: watchdog@40600000 {
731                 compatible = "ti,j7-rti-wdt";
732                 reg = <0x00 0x40600000 0x00 0x100>;
733                 clocks = <&k3_clks 295 1>;
734                 power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
735                 assigned-clocks = <&k3_clks 295 1>;
736                 assigned-clock-parents = <&k3_clks 295 5>;
737                 /* reserved for MCU_R5F0_0 */
738                 status = "reserved";
739         };
740 
741         mcu_watchdog1: watchdog@40610000 {
742                 compatible = "ti,j7-rti-wdt";
743                 reg = <0x00 0x40610000 0x00 0x100>;
744                 clocks = <&k3_clks 296 1>;
745                 power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
746                 assigned-clocks = <&k3_clks 296 1>;
747                 assigned-clock-parents = <&k3_clks 296 5>;
748                 /* reserved for MCU_R5F0_1 */
749                 status = "reserved";
750         };
751 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php