~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi

Version: ~ [ linux-6.11.5 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.58 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.114 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.169 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.228 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.284 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.322 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
  2 /*
  3  * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
  4  *
  5  * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
  6  */
  7 
  8 &cbass_mcu_wakeup {
  9         sms: system-controller@44083000 {
 10                 bootph-all;
 11                 compatible = "ti,k2g-sci";
 12                 ti,host-id = <12>;
 13 
 14                 mbox-names = "rx", "tx";
 15 
 16                 mboxes = <&secure_proxy_main 11>,
 17                          <&secure_proxy_main 13>;
 18 
 19                 reg-names = "debug_messages";
 20                 reg = <0x00 0x44083000 0x00 0x1000>;
 21 
 22                 k3_pds: power-controller {
 23                         bootph-all;
 24                         compatible = "ti,sci-pm-domain";
 25                         #power-domain-cells = <2>;
 26                 };
 27 
 28                 k3_clks: clock-controller {
 29                         bootph-all;
 30                         compatible = "ti,k2g-sci-clk";
 31                         #clock-cells = <2>;
 32                 };
 33 
 34                 k3_reset: reset-controller {
 35                         bootph-all;
 36                         compatible = "ti,sci-reset";
 37                         #reset-cells = <2>;
 38                 };
 39         };
 40 
 41         wkup_conf: bus@43000000 {
 42                 bootph-all;
 43                 compatible = "simple-bus";
 44                 #address-cells = <1>;
 45                 #size-cells = <1>;
 46                 ranges = <0x0 0x00 0x43000000 0x20000>;
 47 
 48                 chipid: chipid@14 {
 49                         bootph-all;
 50                         compatible = "ti,am654-chipid";
 51                         reg = <0x14 0x4>;
 52                 };
 53         };
 54 
 55         secure_proxy_sa3: mailbox@43600000 {
 56                 compatible = "ti,am654-secure-proxy";
 57                 #mbox-cells = <1>;
 58                 reg-names = "target_data", "rt", "scfg";
 59                 reg = <0x00 0x43600000 0x00 0x10000>,
 60                       <0x00 0x44880000 0x00 0x20000>,
 61                       <0x00 0x44860000 0x00 0x20000>;
 62                 /*
 63                  * Marked Disabled:
 64                  * Node is incomplete as it is meant for bootloaders and
 65                  * firmware on non-MPU processors
 66                  */
 67                 status = "disabled";
 68         };
 69 
 70         mcu_ram: sram@41c00000 {
 71                 compatible = "mmio-sram";
 72                 reg = <0x00 0x41c00000 0x00 0x100000>;
 73                 ranges = <0x00 0x00 0x41c00000 0x100000>;
 74                 #address-cells = <1>;
 75                 #size-cells = <1>;
 76         };
 77 
 78         wkup_pmx0: pinctrl@4301c000 {
 79                 compatible = "pinctrl-single";
 80                 /* Proxy 0 addressing */
 81                 reg = <0x00 0x4301c000 0x00 0x034>;
 82                 #pinctrl-cells = <1>;
 83                 pinctrl-single,register-width = <32>;
 84                 pinctrl-single,function-mask = <0xffffffff>;
 85         };
 86 
 87         wkup_pmx1: pinctrl@4301c038 {
 88                 compatible = "pinctrl-single";
 89                 /* Proxy 0 addressing */
 90                 reg = <0x00 0x4301c038 0x00 0x02c>;
 91                 #pinctrl-cells = <1>;
 92                 pinctrl-single,register-width = <32>;
 93                 pinctrl-single,function-mask = <0xffffffff>;
 94         };
 95 
 96         wkup_pmx2: pinctrl@4301c068 {
 97                 compatible = "pinctrl-single";
 98                 /* Proxy 0 addressing */
 99                 reg = <0x00 0x4301c068 0x00 0x120>;
100                 #pinctrl-cells = <1>;
101                 pinctrl-single,register-width = <32>;
102                 pinctrl-single,function-mask = <0xffffffff>;
103         };
104 
105         wkup_pmx3: pinctrl@4301c190 {
106                 compatible = "pinctrl-single";
107                 /* Proxy 0 addressing */
108                 reg = <0x00 0x4301c190 0x00 0x004>;
109                 #pinctrl-cells = <1>;
110                 pinctrl-single,register-width = <32>;
111                 pinctrl-single,function-mask = <0xffffffff>;
112         };
113 
114         wkup_gpio_intr: interrupt-controller@42200000 {
115                 compatible = "ti,sci-intr";
116                 reg = <0x00 0x42200000 0x00 0x400>;
117                 ti,intr-trigger-type = <1>;
118                 interrupt-controller;
119                 interrupt-parent = <&gic500>;
120                 #interrupt-cells = <1>;
121                 ti,sci = <&sms>;
122                 ti,sci-dev-id = <177>;
123                 ti,interrupt-ranges = <16 960 16>;
124         };
125 
126         /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
127         mcu_timerio_input: pinctrl@40f04200 {
128                 compatible = "pinctrl-single";
129                 reg = <0x00 0x40f04200 0x00 0x28>;
130                 #pinctrl-cells = <1>;
131                 pinctrl-single,register-width = <32>;
132                 pinctrl-single,function-mask = <0x0000000f>;
133                 /* Non-MPU Firmware usage */
134                 status = "reserved";
135         };
136 
137         /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
138         mcu_timerio_output: pinctrl@40f04280 {
139                 compatible = "pinctrl-single";
140                 reg = <0x00 0x40f04280 0x00 0x28>;
141                 #pinctrl-cells = <1>;
142                 pinctrl-single,register-width = <32>;
143                 pinctrl-single,function-mask = <0x0000000f>;
144                 /* Non-MPU Firmware usage */
145                 status = "reserved";
146         };
147 
148         mcu_conf: bus@40f00000 {
149                 compatible = "simple-bus";
150                 #address-cells = <1>;
151                 #size-cells = <1>;
152                 ranges = <0x0 0x0 0x40f00000 0x20000>;
153 
154                 cpsw_mac_syscon: ethernet-mac-syscon@200 {
155                         compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
156                         reg = <0x200 0x8>;
157                 };
158 
159                 phy_gmii_sel: phy@4040 {
160                         compatible = "ti,am654-phy-gmii-sel";
161                         reg = <0x4040 0x4>;
162                         #phy-cells = <1>;
163                 };
164         };
165 
166         mcu_timer0: timer@40400000 {
167                 compatible = "ti,am654-timer";
168                 reg = <0x00 0x40400000 0x00 0x400>;
169                 interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
170                 clocks = <&k3_clks 35 2>;
171                 clock-names = "fck";
172                 assigned-clocks = <&k3_clks 35 2>;
173                 assigned-clock-parents = <&k3_clks 35 3>;
174                 power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
175                 ti,timer-pwm;
176                 /* Non-MPU Firmware usage */
177                 status = "reserved";
178         };
179 
180         mcu_timer1: timer@40410000 {
181                 bootph-all;
182                 compatible = "ti,am654-timer";
183                 reg = <0x00 0x40410000 0x00 0x400>;
184                 interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
185                 clocks = <&k3_clks 117 2>;
186                 clock-names = "fck";
187                 assigned-clocks = <&k3_clks 117 2>;
188                 assigned-clock-parents = <&k3_clks 117 3>;
189                 power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
190                 ti,timer-pwm;
191                 /* Non-MPU Firmware usage */
192                 status = "reserved";
193         };
194 
195         mcu_timer2: timer@40420000 {
196                 compatible = "ti,am654-timer";
197                 reg = <0x00 0x40420000 0x00 0x400>;
198                 interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
199                 clocks = <&k3_clks 118 2>;
200                 clock-names = "fck";
201                 assigned-clocks = <&k3_clks 118 2>;
202                 assigned-clock-parents = <&k3_clks 118 3>;
203                 power-domains = <&k3_pds 118 TI_SCI_PD_EXCLUSIVE>;
204                 ti,timer-pwm;
205                 /* Non-MPU Firmware usage */
206                 status = "reserved";
207         };
208 
209         mcu_timer3: timer@40430000 {
210                 compatible = "ti,am654-timer";
211                 reg = <0x00 0x40430000 0x00 0x400>;
212                 interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
213                 clocks = <&k3_clks 119 2>;
214                 clock-names = "fck";
215                 assigned-clocks = <&k3_clks 119 2>;
216                 assigned-clock-parents = <&k3_clks 119 3>;
217                 power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
218                 ti,timer-pwm;
219                 /* Non-MPU Firmware usage */
220                 status = "reserved";
221         };
222 
223         mcu_timer4: timer@40440000 {
224                 compatible = "ti,am654-timer";
225                 reg = <0x00 0x40440000 0x00 0x400>;
226                 interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
227                 clocks = <&k3_clks 120 2>;
228                 clock-names = "fck";
229                 assigned-clocks = <&k3_clks 120 2>;
230                 assigned-clock-parents = <&k3_clks 120 3>;
231                 power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
232                 ti,timer-pwm;
233                 /* Non-MPU Firmware usage */
234                 status = "reserved";
235         };
236 
237         mcu_timer5: timer@40450000 {
238                 compatible = "ti,am654-timer";
239                 reg = <0x00 0x40450000 0x00 0x400>;
240                 interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
241                 clocks = <&k3_clks 121 2>;
242                 clock-names = "fck";
243                 assigned-clocks = <&k3_clks 121 2>;
244                 assigned-clock-parents = <&k3_clks 121 3>;
245                 power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
246                 ti,timer-pwm;
247                 /* Non-MPU Firmware usage */
248                 status = "reserved";
249         };
250 
251         mcu_timer6: timer@40460000 {
252                 compatible = "ti,am654-timer";
253                 reg = <0x00 0x40460000 0x00 0x400>;
254                 interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
255                 clocks = <&k3_clks 122 2>;
256                 clock-names = "fck";
257                 assigned-clocks = <&k3_clks 122 2>;
258                 assigned-clock-parents = <&k3_clks 122 3>;
259                 power-domains = <&k3_pds 122 TI_SCI_PD_EXCLUSIVE>;
260                 ti,timer-pwm;
261                 /* Non-MPU Firmware usage */
262                 status = "reserved";
263         };
264 
265         mcu_timer7: timer@40470000 {
266                 compatible = "ti,am654-timer";
267                 reg = <0x00 0x40470000 0x00 0x400>;
268                 interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
269                 clocks = <&k3_clks 123 2>;
270                 clock-names = "fck";
271                 assigned-clocks = <&k3_clks 123 2>;
272                 assigned-clock-parents = <&k3_clks 123 3>;
273                 power-domains = <&k3_pds 123 TI_SCI_PD_EXCLUSIVE>;
274                 ti,timer-pwm;
275                 /* Non-MPU Firmware usage */
276                 status = "reserved";
277         };
278 
279         mcu_timer8: timer@40480000 {
280                 compatible = "ti,am654-timer";
281                 reg = <0x00 0x40480000 0x00 0x400>;
282                 interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
283                 clocks = <&k3_clks 124 2>;
284                 clock-names = "fck";
285                 assigned-clocks = <&k3_clks 124 2>;
286                 assigned-clock-parents = <&k3_clks 124 3>;
287                 power-domains = <&k3_pds 124 TI_SCI_PD_EXCLUSIVE>;
288                 ti,timer-pwm;
289                 /* Non-MPU Firmware usage */
290                 status = "reserved";
291         };
292 
293         mcu_timer9: timer@40490000 {
294                 compatible = "ti,am654-timer";
295                 reg = <0x00 0x40490000 0x00 0x400>;
296                 interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
297                 clocks = <&k3_clks 125 2>;
298                 clock-names = "fck";
299                 assigned-clocks = <&k3_clks 125 2>;
300                 assigned-clock-parents = <&k3_clks 125 3>;
301                 power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
302                 ti,timer-pwm;
303                 /* Non-MPU Firmware usage */
304                 status = "reserved";
305         };
306 
307         wkup_uart0: serial@42300000 {
308                 compatible = "ti,j721e-uart", "ti,am654-uart";
309                 reg = <0x00 0x42300000 0x00 0x200>;
310                 interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
311                 clocks = <&k3_clks 397 0>;
312                 clock-names = "fclk";
313                 power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
314                 status = "disabled";
315         };
316 
317         mcu_uart0: serial@40a00000 {
318                 compatible = "ti,j721e-uart", "ti,am654-uart";
319                 reg = <0x00 0x40a00000 0x00 0x200>;
320                 interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
321                 clocks = <&k3_clks 149 0>;
322                 clock-names = "fclk";
323                 power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
324                 status = "disabled";
325         };
326 
327         wkup_gpio0: gpio@42110000 {
328                 compatible = "ti,j721e-gpio", "ti,keystone-gpio";
329                 reg = <0x00 0x42110000 0x00 0x100>;
330                 gpio-controller;
331                 #gpio-cells = <2>;
332                 interrupt-parent = <&wkup_gpio_intr>;
333                 interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
334                 interrupt-controller;
335                 #interrupt-cells = <2>;
336                 ti,ngpio = <89>;
337                 ti,davinci-gpio-unbanked = <0>;
338                 power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
339                 clocks = <&k3_clks 167 0>;
340                 clock-names = "gpio";
341                 status = "disabled";
342         };
343 
344         wkup_gpio1: gpio@42100000 {
345                 compatible = "ti,j721e-gpio", "ti,keystone-gpio";
346                 reg = <0x00 0x42100000 0x00 0x100>;
347                 gpio-controller;
348                 #gpio-cells = <2>;
349                 interrupt-parent = <&wkup_gpio_intr>;
350                 interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
351                 interrupt-controller;
352                 #interrupt-cells = <2>;
353                 ti,ngpio = <89>;
354                 ti,davinci-gpio-unbanked = <0>;
355                 power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
356                 clocks = <&k3_clks 168 0>;
357                 clock-names = "gpio";
358                 status = "disabled";
359         };
360 
361         wkup_i2c0: i2c@42120000 {
362                 compatible = "ti,j721e-i2c", "ti,omap4-i2c";
363                 reg = <0x00 0x42120000 0x00 0x100>;
364                 interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
365                 #address-cells = <1>;
366                 #size-cells = <0>;
367                 clocks = <&k3_clks 279 2>;
368                 clock-names = "fck";
369                 power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
370                 status = "disabled";
371         };
372 
373         mcu_i2c0: i2c@40b00000 {
374                 compatible = "ti,j721e-i2c", "ti,omap4-i2c";
375                 reg = <0x00 0x40b00000 0x00 0x100>;
376                 interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
377                 #address-cells = <1>;
378                 #size-cells = <0>;
379                 clocks = <&k3_clks 277 2>;
380                 clock-names = "fck";
381                 power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
382                 status = "disabled";
383         };
384 
385         mcu_i2c1: i2c@40b10000 {
386                 compatible = "ti,j721e-i2c", "ti,omap4-i2c";
387                 reg = <0x00 0x40b10000 0x00 0x100>;
388                 interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
389                 #address-cells = <1>;
390                 #size-cells = <0>;
391                 clocks = <&k3_clks 278 2>;
392                 clock-names = "fck";
393                 power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
394                 status = "disabled";
395         };
396 
397         mcu_mcan0: can@40528000 {
398                 compatible = "bosch,m_can";
399                 reg = <0x00 0x40528000 0x00 0x200>,
400                       <0x00 0x40500000 0x00 0x8000>;
401                 reg-names = "m_can", "message_ram";
402                 power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>;
403                 clocks = <&k3_clks 263 6>, <&k3_clks 263 1>;
404                 clock-names = "hclk", "cclk";
405                 interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
406                              <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
407                 interrupt-names = "int0", "int1";
408                 bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
409                 status = "disabled";
410         };
411 
412         mcu_mcan1: can@40568000 {
413                 compatible = "bosch,m_can";
414                 reg = <0x00 0x40568000 0x00 0x200>,
415                       <0x00 0x40540000 0x00 0x8000>;
416                 reg-names = "m_can", "message_ram";
417                 power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
418                 clocks = <&k3_clks 264 6>, <&k3_clks 264 1>;
419                 clock-names = "hclk", "cclk";
420                 interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
421                              <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
422                 interrupt-names = "int0", "int1";
423                 bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
424                 status = "disabled";
425         };
426 
427         mcu_spi0: spi@40300000 {
428                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
429                 reg = <0x00 0x040300000 0x00 0x400>;
430                 interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
431                 #address-cells = <1>;
432                 #size-cells = <0>;
433                 power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>;
434                 clocks = <&k3_clks 384 0>;
435                 status = "disabled";
436         };
437 
438         mcu_spi1: spi@40310000 {
439                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
440                 reg = <0x00 0x040310000 0x00 0x400>;
441                 interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
442                 #address-cells = <1>;
443                 #size-cells = <0>;
444                 power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>;
445                 clocks = <&k3_clks 385 0>;
446                 status = "disabled";
447         };
448 
449         mcu_spi2: spi@40320000 {
450                 compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
451                 reg = <0x00 0x040320000 0x00 0x400>;
452                 interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
453                 #address-cells = <1>;
454                 #size-cells = <0>;
455                 power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>;
456                 clocks = <&k3_clks 386 0>;
457                 status = "disabled";
458         };
459 
460         mcu_navss: bus@28380000 {
461                 bootph-all;
462                 compatible = "simple-bus";
463                 #address-cells = <2>;
464                 #size-cells = <2>;
465                 ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
466                 ti,sci-dev-id = <323>;
467                 dma-coherent;
468                 dma-ranges;
469 
470                 mcu_ringacc: ringacc@2b800000 {
471                         bootph-all;
472                         compatible = "ti,am654-navss-ringacc";
473                         reg = <0x00 0x2b800000 0x00 0x400000>,
474                               <0x00 0x2b000000 0x00 0x400000>,
475                               <0x00 0x28590000 0x00 0x100>,
476                               <0x00 0x2a500000 0x00 0x40000>,
477                               <0x00 0x28440000 0x00 0x40000>;
478                         reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
479                         ti,num-rings = <286>;
480                         ti,sci-rm-range-gp-rings = <0x1>;
481                         ti,sci = <&sms>;
482                         ti,sci-dev-id = <328>;
483                         msi-parent = <&main_udmass_inta>;
484                 };
485 
486                 mcu_udmap: dma-controller@285c0000 {
487                         bootph-all;
488                         compatible = "ti,j721e-navss-mcu-udmap";
489                         reg = <0x00 0x285c0000 0x00 0x100>,
490                               <0x00 0x2a800000 0x00 0x40000>,
491                               <0x00 0x2aa00000 0x00 0x40000>,
492                               <0x00 0x284a0000 0x00 0x4000>,
493                               <0x00 0x284c0000 0x00 0x4000>,
494                               <0x00 0x28400000 0x00 0x2000>;
495                         reg-names = "gcfg", "rchanrt", "tchanrt",
496                                     "tchan", "rchan", "rflow";
497                         msi-parent = <&main_udmass_inta>;
498                         #dma-cells = <1>;
499 
500                         ti,sci = <&sms>;
501                         ti,sci-dev-id = <329>;
502                         ti,ringacc = <&mcu_ringacc>;
503                         ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
504                                                 <0x0f>; /* TX_HCHAN */
505                         ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
506                                                 <0x0b>; /* RX_HCHAN */
507                         ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
508                 };
509         };
510 
511         secure_proxy_mcu: mailbox@2a480000 {
512                 compatible = "ti,am654-secure-proxy";
513                 #mbox-cells = <1>;
514                 reg-names = "target_data", "rt", "scfg";
515                 reg = <0x00 0x2a480000 0x00 0x80000>,
516                       <0x00 0x2a380000 0x00 0x80000>,
517                       <0x00 0x2a400000 0x00 0x80000>;
518                 /*
519                  * Marked Disabled:
520                  * Node is incomplete as it is meant for bootloaders and
521                  * firmware on non-MPU processors
522                  */
523                 status = "disabled";
524         };
525 
526         mcu_cpsw: ethernet@46000000 {
527                 compatible = "ti,j721e-cpsw-nuss";
528                 #address-cells = <2>;
529                 #size-cells = <2>;
530                 reg = <0x00 0x46000000 0x00 0x200000>;
531                 reg-names = "cpsw_nuss";
532                 ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
533                 dma-coherent;
534                 clocks = <&k3_clks 63 0>;
535                 clock-names = "fck";
536                 power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
537 
538                 dmas = <&mcu_udmap 0xf000>,
539                        <&mcu_udmap 0xf001>,
540                        <&mcu_udmap 0xf002>,
541                        <&mcu_udmap 0xf003>,
542                        <&mcu_udmap 0xf004>,
543                        <&mcu_udmap 0xf005>,
544                        <&mcu_udmap 0xf006>,
545                        <&mcu_udmap 0xf007>,
546                        <&mcu_udmap 0x7000>;
547                 dma-names = "tx0", "tx1", "tx2", "tx3",
548                             "tx4", "tx5", "tx6", "tx7",
549                             "rx";
550                 status = "disabled";
551 
552                 ethernet-ports {
553                         #address-cells = <1>;
554                         #size-cells = <0>;
555 
556                         mcu_cpsw_port1: port@1 {
557                                 reg = <1>;
558                                 ti,mac-only;
559                                 label = "port1";
560                                 ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
561                                 phys = <&phy_gmii_sel 1>;
562                         };
563                 };
564 
565                 davinci_mdio: mdio@f00 {
566                         compatible = "ti,cpsw-mdio","ti,davinci_mdio";
567                         reg = <0x00 0xf00 0x00 0x100>;
568                         #address-cells = <1>;
569                         #size-cells = <0>;
570                         clocks = <&k3_clks 63 0>;
571                         clock-names = "fck";
572                         bus_freq = <1000000>;
573                 };
574 
575                 cpts@3d000 {
576                         compatible = "ti,am65-cpts";
577                         reg = <0x00 0x3d000 0x00 0x400>;
578                         clocks = <&k3_clks 63 3>;
579                         clock-names = "cpts";
580                         assigned-clocks = <&k3_clks 63 3>; /* CPTS_RFT_CLK */
581                         assigned-clock-parents = <&k3_clks 63 5>; /* MAIN_0_HSDIV6_CLK */
582                         interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
583                         interrupt-names = "cpts";
584                         ti,cpts-ext-ts-inputs = <4>;
585                         ti,cpts-periodic-outputs = <2>;
586                 };
587         };
588 
589         mcu_r5fss0: r5fss@41000000 {
590                 compatible = "ti,j721s2-r5fss";
591                 ti,cluster-mode = <1>;
592                 #address-cells = <1>;
593                 #size-cells = <1>;
594                 ranges = <0x41000000 0x00 0x41000000 0x20000>,
595                          <0x41400000 0x00 0x41400000 0x20000>;
596                 power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
597 
598                 mcu_r5fss0_core0: r5f@41000000 {
599                         compatible = "ti,j721s2-r5f";
600                         reg = <0x41000000 0x00010000>,
601                               <0x41010000 0x00010000>;
602                         reg-names = "atcm", "btcm";
603                         ti,sci = <&sms>;
604                         ti,sci-dev-id = <346>;
605                         ti,sci-proc-ids = <0x01 0xff>;
606                         resets = <&k3_reset 346 1>;
607                         firmware-name = "j784s4-mcu-r5f0_0-fw";
608                         ti,atcm-enable = <1>;
609                         ti,btcm-enable = <1>;
610                         ti,loczrama = <1>;
611                 };
612 
613                 mcu_r5fss0_core1: r5f@41400000 {
614                         compatible = "ti,j721s2-r5f";
615                         reg = <0x41400000 0x00010000>,
616                               <0x41410000 0x00010000>;
617                         reg-names = "atcm", "btcm";
618                         ti,sci = <&sms>;
619                         ti,sci-dev-id = <347>;
620                         ti,sci-proc-ids = <0x02 0xff>;
621                         resets = <&k3_reset 347 1>;
622                         firmware-name = "j784s4-mcu-r5f0_1-fw";
623                         ti,atcm-enable = <1>;
624                         ti,btcm-enable = <1>;
625                         ti,loczrama = <1>;
626                 };
627         };
628 
629         wkup_vtm0: temperature-sensor@42040000 {
630                 compatible = "ti,j7200-vtm";
631                 reg = <0x00 0x42040000 0x00 0x350>,
632                       <0x00 0x42050000 0x00 0x350>;
633                 power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>;
634                 #thermal-sensor-cells = <1>;
635         };
636 
637         tscadc0: tscadc@40200000 {
638                 compatible = "ti,am3359-tscadc";
639                 reg = <0x00 0x40200000 0x00 0x1000>;
640                 interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
641                 power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
642                 clocks = <&k3_clks 0 0>;
643                 assigned-clocks = <&k3_clks 0 2>;
644                 assigned-clock-rates = <60000000>;
645                 clock-names = "fck";
646                 dmas = <&main_udmap 0x7400>,
647                         <&main_udmap 0x7401>;
648                 dma-names = "fifo0", "fifo1";
649                 status = "disabled";
650 
651                 adc {
652                         #io-channel-cells = <1>;
653                         compatible = "ti,am3359-adc";
654                 };
655         };
656 
657         tscadc1: tscadc@40210000 {
658                 compatible = "ti,am3359-tscadc";
659                 reg = <0x00 0x40210000 0x00 0x1000>;
660                 interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
661                 power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
662                 clocks = <&k3_clks 1 0>;
663                 assigned-clocks = <&k3_clks 1 2>;
664                 assigned-clock-rates = <60000000>;
665                 clock-names = "fck";
666                 dmas = <&main_udmap 0x7402>,
667                         <&main_udmap 0x7403>;
668                 dma-names = "fifo0", "fifo1";
669                 status = "disabled";
670 
671                 adc {
672                         #io-channel-cells = <1>;
673                         compatible = "ti,am3359-adc";
674                 };
675         };
676 
677         fss: bus@47000000 {
678                 compatible = "simple-bus";
679                 #address-cells = <2>;
680                 #size-cells = <2>;
681                 ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
682                          <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
683                          <0x0 0x47050000 0x0 0x47050000 0x0 0x100>, /* OSPI1 Control */
684                          <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>, /* OSPI0 Memory */
685                          <0x7 0x00000000 0x7 0x00000000 0x1 0x0000000>; /* OSPI1 Memory */
686 
687                 ospi0: spi@47040000 {
688                         compatible = "ti,am654-ospi", "cdns,qspi-nor";
689                         reg = <0x00 0x47040000 0x00 0x100>,
690                               <0x05 0x0000000 0x01 0x0000000>;
691                         interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
692                         cdns,fifo-depth = <256>;
693                         cdns,fifo-width = <4>;
694                         cdns,trigger-address = <0x0>;
695                         clocks = <&k3_clks 161 7>;
696                         assigned-clocks = <&k3_clks 161 7>;
697                         assigned-clock-parents = <&k3_clks 161 9>;
698                         assigned-clock-rates = <166666666>;
699                         power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
700                         #address-cells = <1>;
701                         #size-cells = <0>;
702                         status = "disabled";
703                 };
704 
705                 ospi1: spi@47050000 {
706                         compatible = "ti,am654-ospi", "cdns,qspi-nor";
707                         reg = <0x00 0x47050000 0x00 0x100>,
708                               <0x07 0x0000000 0x01 0x0000000>;
709                         interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
710                         cdns,fifo-depth = <256>;
711                         cdns,fifo-width = <4>;
712                         cdns,trigger-address = <0x0>;
713                         clocks = <&k3_clks 162 7>;
714                         power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
715                         #address-cells = <1>;
716                         #size-cells = <0>;
717                         status = "disabled";
718                 };
719         };
720 
721         mcu_esm: esm@40800000 {
722                 compatible = "ti,j721e-esm";
723                 reg = <0x00 0x40800000 0x00 0x1000>;
724                 ti,esm-pins = <95>;
725                 bootph-pre-ram;
726         };
727 
728         wkup_esm: esm@42080000 {
729                 compatible = "ti,j721e-esm";
730                 reg = <0x00 0x42080000 0x00 0x1000>;
731                 ti,esm-pins = <63>;
732                 bootph-pre-ram;
733         };
734 
735         /*
736          * The 2 RTI instances are couple with MCU R5Fs so keeping them
737          * reserved as these will be used by their respective firmware
738          */
739         mcu_watchdog0: watchdog@40600000 {
740                 compatible = "ti,j7-rti-wdt";
741                 reg = <0x00 0x40600000 0x00 0x100>;
742                 clocks = <&k3_clks 367 1>;
743                 power-domains = <&k3_pds 367 TI_SCI_PD_EXCLUSIVE>;
744                 assigned-clocks = <&k3_clks 367 0>;
745                 assigned-clock-parents = <&k3_clks 367 4>;
746                 /* reserved for MCU_R5F0_0 */
747                 status = "reserved";
748         };
749 
750         mcu_watchdog1: watchdog@40610000 {
751                 compatible = "ti,j7-rti-wdt";
752                 reg = <0x00 0x40610000 0x00 0x100>;
753                 clocks = <&k3_clks 368 1>;
754                 power-domains = <&k3_pds 368 TI_SCI_PD_EXCLUSIVE>;
755                 assigned-clocks = <&k3_clks 368 0>;
756                 assigned-clock-parents = <&k3_clks 368 4>;
757                 /* reserved for MCU_R5F0_1 */
758                 status = "reserved";
759         };
760 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php