~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0
  2 /*
  3  * dts file for KV260 revA Carrier Card
  4  *
  5  * (C) Copyright 2020 - 2022, Xilinx, Inc.
  6  * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
  7  *
  8  * Michal Simek <michal.simek@amd.com>
  9  */
 10 
 11 #include <dt-bindings/gpio/gpio.h>
 12 #include <dt-bindings/net/ti-dp83867.h>
 13 #include <dt-bindings/phy/phy.h>
 14 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 15 
 16 /dts-v1/;
 17 /plugin/;
 18 
 19 &{/} {
 20         compatible = "xlnx,zynqmp-sk-kv260-rev2",
 21                      "xlnx,zynqmp-sk-kv260-rev1",
 22                      "xlnx,zynqmp-sk-kv260-revB",
 23                      "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 24         model = "ZynqMP KV260 revB";
 25 
 26         ina260-u14 {
 27                 compatible = "iio-hwmon";
 28                 io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
 29         };
 30 
 31         si5332_0: si5332-0 { /* u17 */
 32                 compatible = "fixed-clock";
 33                 #clock-cells = <0>;
 34                 clock-frequency = <125000000>;
 35         };
 36 
 37         si5332_1: si5332-1 { /* u17 */
 38                 compatible = "fixed-clock";
 39                 #clock-cells = <0>;
 40                 clock-frequency = <25000000>;
 41         };
 42 
 43         si5332_2: si5332-2 { /* u17 */
 44                 compatible = "fixed-clock";
 45                 #clock-cells = <0>;
 46                 clock-frequency = <48000000>;
 47         };
 48 
 49         si5332_3: si5332-3 { /* u17 */
 50                 compatible = "fixed-clock";
 51                 #clock-cells = <0>;
 52                 clock-frequency = <24000000>;
 53         };
 54 
 55         si5332_4: si5332-4 { /* u17 */
 56                 compatible = "fixed-clock";
 57                 #clock-cells = <0>;
 58                 clock-frequency = <26000000>;
 59         };
 60 
 61         si5332_5: si5332-5 { /* u17 */
 62                 compatible = "fixed-clock";
 63                 #clock-cells = <0>;
 64                 clock-frequency = <27000000>;
 65         };
 66 
 67         dpcon {
 68                 compatible = "dp-connector";
 69                 label = "P11";
 70                 type = "full-size";
 71 
 72                 port {
 73                         dpcon_in: endpoint {
 74                                 remote-endpoint = <&dpsub_dp_out>;
 75                         };
 76                 };
 77         };
 78 };
 79 
 80 &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
 81         #address-cells = <1>;
 82         #size-cells = <0>;
 83         pinctrl-names = "default", "gpio";
 84         pinctrl-0 = <&pinctrl_i2c1_default>;
 85         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 86         scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 87         sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 88 
 89         u14: ina260@40 { /* u14 */
 90                 compatible = "ti,ina260";
 91                 #io-channel-cells = <1>;
 92                 label = "ina260-u14";
 93                 reg = <0x40>;
 94         };
 95         /* u43 - 0x2d - USB hub */
 96         /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 97 };
 98 
 99 /* DP/USB 3.0 */
100 &psgtr {
101         status = "okay";
102         /* pcie, usb3, sata */
103         clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
104         clock-names = "ref0", "ref1", "ref2";
105 };
106 
107 &zynqmp_dpsub {
108         status = "okay";
109         phy-names = "dp-phy0", "dp-phy1";
110         phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
111         assigned-clock-rates = <27000000>, <25000000>, <300000000>;
112 
113         ports {
114                 port@5 {
115                         dpsub_dp_out: endpoint {
116                                 remote-endpoint = <&dpcon_in>;
117                         };
118                 };
119         };
120 };
121 
122 &zynqmp_dpdma {
123         status = "okay";
124         assigned-clock-rates = <600000000>;
125 };
126 
127 &usb0 {
128         status = "okay";
129         pinctrl-names = "default";
130         pinctrl-0 = <&pinctrl_usb0_default>;
131         phy-names = "usb3-phy";
132         phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
133         assigned-clock-rates = <250000000>, <20000000>;
134 };
135 
136 &dwc3_0 {
137         status = "okay";
138         dr_mode = "host";
139         snps,usb3_lpm_capable;
140         maximum-speed = "super-speed";
141 };
142 
143 &sdhci1 { /* on CC with tuned parameters */
144         status = "okay";
145         pinctrl-names = "default";
146         pinctrl-0 = <&pinctrl_sdhci1_default>;
147         /*
148          * SD 3.0 requires level shifter and this property
149          * should be removed if the board has level shifter and
150          * need to work in UHS mode
151          */
152         no-1-8-v;
153         disable-wp;
154         xlnx,mio-bank = <1>;
155         clk-phase-sd-hs = <126>, <60>;
156         clk-phase-uhs-sdr25 = <120>, <60>;
157         clk-phase-uhs-ddr50 = <126>, <48>;
158         assigned-clock-rates = <187498123>;
159         bus-width = <4>;
160 };
161 
162 &gem3 {
163         status = "okay";
164         pinctrl-names = "default";
165         pinctrl-0 = <&pinctrl_gem3_default>;
166         phy-handle = <&phy0>;
167         phy-mode = "rgmii-id";
168         assigned-clock-rates = <250000000>;
169 
170         mdio: mdio {
171                 #address-cells = <1>;
172                 #size-cells = <0>;
173 
174                 phy0: ethernet-phy@1 {
175                         #phy-cells = <1>;
176                         reg = <1>;
177                         compatible = "ethernet-phy-id2000.a231";
178                         ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
179                         ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
180                         ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
181                         ti,dp83867-rxctrl-strap-quirk;
182                         reset-assert-us = <100>;
183                         reset-deassert-us = <280>;
184                         reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
185                 };
186         };
187 };
188 
189 &pinctrl0 {
190         status = "okay";
191 
192         pinctrl_gpio0_default: gpio0-default {
193                 conf {
194                         groups = "gpio0_38_grp";
195                         bias-pull-up;
196                         power-source = <IO_STANDARD_LVCMOS18>;
197                 };
198 
199                 mux {
200                         groups = "gpio0_38_grp";
201                         function = "gpio0";
202                 };
203 
204                 conf-tx {
205                         pins = "MIO38";
206                         bias-disable;
207                         output-enable;
208                 };
209         };
210 
211         pinctrl_uart1_default: uart1-default {
212                 conf {
213                         groups = "uart1_9_grp";
214                         slew-rate = <SLEW_RATE_SLOW>;
215                         power-source = <IO_STANDARD_LVCMOS18>;
216                         drive-strength = <12>;
217                 };
218 
219                 conf-rx {
220                         pins = "MIO37";
221                         bias-high-impedance;
222                 };
223 
224                 conf-tx {
225                         pins = "MIO36";
226                         bias-disable;
227                         output-enable;
228                 };
229 
230                 mux {
231                         groups = "uart1_9_grp";
232                         function = "uart1";
233                 };
234         };
235 
236         pinctrl_i2c1_default: i2c1-default {
237                 conf {
238                         groups = "i2c1_6_grp";
239                         bias-pull-up;
240                         slew-rate = <SLEW_RATE_SLOW>;
241                         power-source = <IO_STANDARD_LVCMOS18>;
242                 };
243 
244                 mux {
245                         groups = "i2c1_6_grp";
246                         function = "i2c1";
247                 };
248         };
249 
250         pinctrl_i2c1_gpio: i2c1-gpio-grp {
251                 conf {
252                         groups = "gpio0_24_grp", "gpio0_25_grp";
253                         slew-rate = <SLEW_RATE_SLOW>;
254                         power-source = <IO_STANDARD_LVCMOS18>;
255                 };
256 
257                 mux {
258                         groups = "gpio0_24_grp", "gpio0_25_grp";
259                         function = "gpio0";
260                 };
261         };
262 
263         pinctrl_gem3_default: gem3-default {
264                 conf {
265                         groups = "ethernet3_0_grp";
266                         slew-rate = <SLEW_RATE_SLOW>;
267                         power-source = <IO_STANDARD_LVCMOS18>;
268                 };
269 
270                 conf-rx {
271                         pins = "MIO70", "MIO72", "MIO74";
272                         bias-high-impedance;
273                         low-power-disable;
274                 };
275 
276                 conf-bootstrap {
277                         pins = "MIO71", "MIO73", "MIO75";
278                         bias-disable;
279                         output-enable;
280                         low-power-disable;
281                 };
282 
283                 conf-tx {
284                         pins = "MIO64", "MIO65", "MIO66",
285                                 "MIO67", "MIO68", "MIO69";
286                         bias-disable;
287                         output-enable;
288                         low-power-enable;
289                 };
290 
291                 conf-mdio {
292                         groups = "mdio3_0_grp";
293                         slew-rate = <SLEW_RATE_SLOW>;
294                         power-source = <IO_STANDARD_LVCMOS18>;
295                         bias-disable;
296                         output-enable;
297                 };
298 
299                 mux-mdio {
300                         function = "mdio3";
301                         groups = "mdio3_0_grp";
302                 };
303 
304                 mux {
305                         function = "ethernet3";
306                         groups = "ethernet3_0_grp";
307                 };
308         };
309 
310         pinctrl_usb0_default: usb0-default {
311                 conf {
312                         groups = "usb0_0_grp";
313                         power-source = <IO_STANDARD_LVCMOS18>;
314                 };
315 
316                 conf-rx {
317                         pins = "MIO52", "MIO53", "MIO55";
318                         bias-high-impedance;
319                         drive-strength = <12>;
320                         slew-rate = <SLEW_RATE_FAST>;
321                 };
322 
323                 conf-tx {
324                         pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
325                         "MIO60", "MIO61", "MIO62", "MIO63";
326                         bias-disable;
327                         output-enable;
328                         drive-strength = <4>;
329                         slew-rate = <SLEW_RATE_SLOW>;
330                 };
331 
332                 mux {
333                         groups = "usb0_0_grp";
334                         function = "usb0";
335                 };
336         };
337 
338         pinctrl_sdhci1_default: sdhci1-default {
339                 conf {
340                         groups = "sdio1_0_grp";
341                         slew-rate = <SLEW_RATE_SLOW>;
342                         power-source = <IO_STANDARD_LVCMOS18>;
343                         bias-disable;
344                         output-enable;
345                 };
346 
347                 conf-cd {
348                         groups = "sdio1_cd_0_grp";
349                         bias-high-impedance;
350                         bias-pull-up;
351                         slew-rate = <SLEW_RATE_SLOW>;
352                         power-source = <IO_STANDARD_LVCMOS18>;
353                 };
354 
355                 mux-cd {
356                         groups = "sdio1_cd_0_grp";
357                         function = "sdio1_cd";
358                 };
359 
360                 mux {
361                         groups = "sdio1_0_grp";
362                         function = "sdio1";
363                 };
364         };
365 };
366 
367 &gpio {
368         status = "okay";
369         pinctrl-names = "default";
370         pinctrl-0 = <&pinctrl_gpio0_default>;
371 };
372 
373 &uart1 {
374         status = "okay";
375         pinctrl-names = "default";
376         pinctrl-0 = <&pinctrl_uart1_default>;
377 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php