1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3
4 *
5 * (C) Copyright 2016 - 2021, Xilinx, Inc.
6 *
7 * Michal Simek <michal.simek@amd.com>
8 */
9
10 /dts-v1/;
11
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
14 #include <dt-bindings/phy/phy.h>
15
16 / {
17 model = "ZynqMP zc1751-xm017-dc3 RevA";
18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
19
20 aliases {
21 ethernet0 = &gem0;
22 i2c0 = &i2c0;
23 i2c1 = &i2c1;
24 mmc0 = &sdhci1;
25 rtc0 = &rtc;
26 serial0 = &uart0;
27 serial1 = &uart1;
28 usb0 = &usb0;
29 usb1 = &usb1;
30 };
31
32 chosen {
33 bootargs = "earlycon";
34 stdout-path = "serial0:115200n8";
35 };
36
37 memory@0 {
38 device_type = "memory";
39 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
40 };
41
42 clock_si5338_2: clk26 {
43 compatible = "fixed-clock";
44 #clock-cells = <0>;
45 clock-frequency = <26000000>;
46 };
47
48 clock_si5338_3: clk125 {
49 compatible = "fixed-clock";
50 #clock-cells = <0>;
51 clock-frequency = <125000000>;
52 };
53 };
54
55 &fpd_dma_chan1 {
56 status = "okay";
57 };
58
59 &fpd_dma_chan2 {
60 status = "okay";
61 };
62
63 &fpd_dma_chan3 {
64 status = "okay";
65 };
66
67 &fpd_dma_chan4 {
68 status = "okay";
69 };
70
71 &fpd_dma_chan5 {
72 status = "okay";
73 };
74
75 &fpd_dma_chan6 {
76 status = "okay";
77 };
78
79 &fpd_dma_chan7 {
80 status = "okay";
81 };
82
83 &fpd_dma_chan8 {
84 status = "okay";
85 };
86
87 &gem0 {
88 status = "okay";
89 phy-handle = <&phy0>;
90 phy-mode = "rgmii-id";
91 mdio: mdio {
92 #address-cells = <1>;
93 #size-cells = <0>;
94 phy0: ethernet-phy@0 { /* VSC8211 */
95 reg = <0>;
96 };
97 };
98 };
99
100 &gpio {
101 status = "okay";
102 };
103
104 /* just eeprom here */
105 &i2c0 {
106 status = "okay";
107 clock-frequency = <400000>;
108
109 tca6416_u26: gpio@20 {
110 compatible = "ti,tca6416";
111 reg = <0x20>;
112 gpio-controller;
113 #gpio-cells = <2>;
114 /* IRQ not connected */
115 };
116
117 rtc@68 {
118 compatible = "dallas,ds1339";
119 reg = <0x68>;
120 };
121 };
122
123 /* eeprom24c02 and SE98A temp chip pca9306 */
124 &i2c1 {
125 status = "okay";
126 clock-frequency = <400000>;
127 };
128
129 /* MT29F64G08AECDBJ4-6 */
130 &nand0 {
131 status = "okay";
132 arasan,has-mdma;
133 num-cs = <2>;
134 };
135
136 &psgtr {
137 status = "okay";
138 /* usb3, sata */
139 clocks = <&clock_si5338_2>, <&clock_si5338_3>;
140 clock-names = "ref2", "ref3";
141 };
142
143 &rtc {
144 status = "okay";
145 };
146
147 &sata {
148 status = "okay";
149 /* SATA phy OOB timing settings */
150 ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
151 ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
152 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
153 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
154 ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
155 ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
156 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
157 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
158 phy-names = "sata-phy";
159 phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
160 };
161
162 &sdhci1 { /* emmc with some settings */
163 status = "okay";
164 };
165
166 /* main */
167 &uart0 {
168 status = "okay";
169 };
170
171 /* DB9 */
172 &uart1 {
173 status = "okay";
174 };
175
176 &usb0 {
177 status = "okay";
178 phy-names = "usb3-phy";
179 phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
180 };
181
182 &dwc3_0 {
183 status = "okay";
184 dr_mode = "host";
185 snps,usb3_lpm_capable;
186 maximum-speed = "super-speed";
187 };
188
189 /* ULPI SMSC USB3320 */
190 &usb1 {
191 status = "okay";
192 phy-names = "usb3-phy";
193 phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
194 };
195
196 &dwc3_1 {
197 status = "okay";
198 dr_mode = "host";
199 snps,usb3_lpm_capable;
200 maximum-speed = "super-speed";
201 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.