1 // SPDX-License-Identifier: GPL-2.0
2 /***************************************************************************/
3
4 /*
5 * m527x.c -- platform support for ColdFire 527x based boards
6 *
7 * Sub-architcture dependent initialization code for the Freescale
8 * 5270/5271 and 5274/5275 CPUs.
9 *
10 * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
11 * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
12 */
13
14 /***************************************************************************/
15
16 #include <linux/clkdev.h>
17 #include <linux/kernel.h>
18 #include <linux/param.h>
19 #include <linux/init.h>
20 #include <linux/io.h>
21 #include <asm/machdep.h>
22 #include <asm/coldfire.h>
23 #include <asm/mcfsim.h>
24 #include <asm/mcfuart.h>
25 #include <asm/mcfclk.h>
26
27 /***************************************************************************/
28
29 DEFINE_CLK(pll, "pll.0", MCF_CLK);
30 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
31
32 static struct clk_lookup m527x_clk_lookup[] = {
33 CLKDEV_INIT(NULL, "pll.0", &clk_pll),
34 CLKDEV_INIT(NULL, "sys.0", &clk_sys),
35 CLKDEV_INIT("mcfpit.0", NULL, &clk_pll),
36 CLKDEV_INIT("mcfpit.1", NULL, &clk_pll),
37 CLKDEV_INIT("mcfpit.2", NULL, &clk_pll),
38 CLKDEV_INIT("mcfpit.3", NULL, &clk_pll),
39 CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
40 CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
41 CLKDEV_INIT("mcfuart.2", NULL, &clk_sys),
42 CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
43 CLKDEV_INIT("fec.0", NULL, &clk_sys),
44 CLKDEV_INIT("fec.1", NULL, &clk_sys),
45 CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
46 };
47
48 /***************************************************************************/
49
50 static void __init m527x_qspi_init(void)
51 {
52 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
53 #if defined(CONFIG_M5271)
54 u16 par;
55
56 /* setup QSPS pins for QSPI with gpio CS control */
57 writeb(0x1f, MCFGPIO_PAR_QSPI);
58 /* and CS2 & CS3 as gpio */
59 par = readw(MCFGPIO_PAR_TIMER);
60 par &= 0x3f3f;
61 writew(par, MCFGPIO_PAR_TIMER);
62 #elif defined(CONFIG_M5275)
63 /* setup QSPS pins for QSPI with gpio CS control */
64 writew(0x003e, MCFGPIO_PAR_QSPI);
65 #endif
66 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
67 }
68
69 /***************************************************************************/
70
71 static void __init m527x_i2c_init(void)
72 {
73 #if IS_ENABLED(CONFIG_I2C_IMX)
74 #if defined(CONFIG_M5271)
75 u8 par;
76
77 /* setup Port FECI2C Pin Assignment Register for I2C */
78 /* set PAR_SCL to SCL and PAR_SDA to SDA */
79 par = readb(MCFGPIO_PAR_FECI2C);
80 par |= 0x0f;
81 writeb(par, MCFGPIO_PAR_FECI2C);
82 #elif defined(CONFIG_M5275)
83 u16 par;
84
85 /* setup Port FECI2C Pin Assignment Register for I2C */
86 /* set PAR_SCL to SCL and PAR_SDA to SDA */
87 par = readw(MCFGPIO_PAR_FECI2C);
88 par |= 0x0f;
89 writew(par, MCFGPIO_PAR_FECI2C);
90 #endif
91 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
92 }
93
94 /***************************************************************************/
95
96 static void __init m527x_uarts_init(void)
97 {
98 u16 sepmask;
99
100 /*
101 * External Pin Mask Setting & Enable External Pin for Interface
102 */
103 sepmask = readw(MCFGPIO_PAR_UART);
104 sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
105 writew(sepmask, MCFGPIO_PAR_UART);
106 }
107
108 /***************************************************************************/
109
110 static void __init m527x_fec_init(void)
111 {
112 u8 v;
113
114 /* Set multi-function pins to ethernet mode for fec0 */
115 #if defined(CONFIG_M5271)
116 v = readb(MCFGPIO_PAR_FECI2C);
117 writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
118 #else
119 u16 par;
120
121 par = readw(MCFGPIO_PAR_FECI2C);
122 writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
123 v = readb(MCFGPIO_PAR_FEC0HL);
124 writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
125
126 /* Set multi-function pins to ethernet mode for fec1 */
127 par = readw(MCFGPIO_PAR_FECI2C);
128 writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
129 v = readb(MCFGPIO_PAR_FEC1HL);
130 writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
131 #endif
132 }
133
134 /***************************************************************************/
135
136 void __init config_BSP(char *commandp, int size)
137 {
138 mach_sched_init = hw_timer_init;
139 m527x_uarts_init();
140 m527x_fec_init();
141 m527x_qspi_init();
142 m527x_i2c_init();
143 clkdev_add_table(m527x_clk_lookup, ARRAY_SIZE(m527x_clk_lookup));
144 }
145
146 /***************************************************************************/
147
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.