1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /****************************************************************************/ 3 4 /* 5 * m53xxacr.h -- ColdFire version 3 core cache support 6 * 7 * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com> 8 */ 9 10 /****************************************************************************/ 11 #ifndef m53xxacr_h 12 #define m53xxacr_h 13 /****************************************************************************/ 14 15 /* 16 * All varients of the ColdFire using version 3 cores have a similar 17 * cache setup. They have a unified instruction and data cache, with 18 * configurable write-through or copy-back operation. 19 */ 20 21 /* 22 * Define the Cache Control register flags. 23 */ 24 #define CACR_EC 0x80000000 /* Enable cache */ 25 #define CACR_ESB 0x20000000 /* Enable store buffer */ 26 #define CACR_DPI 0x10000000 /* Disable invalidation by CPUSHL */ 27 #define CACR_HLCK 0x08000000 /* Half cache lock mode */ 28 #define CACR_CINVA 0x01000000 /* Invalidate cache */ 29 #define CACR_DNFB 0x00000400 /* Inhibited fill buffer */ 30 #define CACR_DCM_WT 0x00000000 /* Cacheable write-through */ 31 #define CACR_DCM_CB 0x00000100 /* Cacheable copy-back */ 32 #define CACR_DCM_PRE 0x00000200 /* Cache inhibited, precise */ 33 #define CACR_DCM_IMPRE 0x00000300 /* Cache inhibited, imprecise */ 34 #define CACR_WPROTECT 0x00000020 /* Write protect*/ 35 #define CACR_EUSP 0x00000010 /* Eanble separate user a7 */ 36 37 /* 38 * Define the Access Control register flags. 39 */ 40 #define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */ 41 #define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */ 42 #define ACR_ENABLE 0x00008000 /* Enable this ACR */ 43 #define ACR_USER 0x00000000 /* Allow only user accesses */ 44 #define ACR_SUPER 0x00002000 /* Allow supervisor access only */ 45 #define ACR_ANY 0x00004000 /* Allow any access type */ 46 #define ACR_CM_WT 0x00000000 /* Cacheable, write-through */ 47 #define ACR_CM_CB 0x00000020 /* Cacheable, copy-back */ 48 #define ACR_CM_PRE 0x00000040 /* Cache inhibited, precise */ 49 #define ACR_CM_IMPRE 0x00000060 /* Cache inhibited, imprecise */ 50 #define ACR_WPROTECT 0x00000004 /* Write protect region */ 51 52 /* 53 * Define the cache type and arrangement (needed for pushes). 54 */ 55 #if defined(CONFIG_M5307) 56 #define CACHE_SIZE 0x2000 /* 8k of unified cache */ 57 #define ICACHE_SIZE CACHE_SIZE 58 #define DCACHE_SIZE CACHE_SIZE 59 #elif defined(CONFIG_M53xx) 60 #define CACHE_SIZE 0x4000 /* 16k of unified cache */ 61 #define ICACHE_SIZE CACHE_SIZE 62 #define DCACHE_SIZE CACHE_SIZE 63 #endif 64 65 #define CACHE_LINE_SIZE 16 /* 16 byte line size */ 66 #define CACHE_WAYS 4 /* 4 ways - set associative */ 67 68 /* 69 * Set the cache controller settings we will use. This default in the 70 * CACR is cache inhibited, we use the ACR register to set cacheing 71 * enabled on the regions we want (eg RAM). 72 */ 73 #if defined(CONFIG_CACHE_COPYBACK) 74 #define CACHE_TYPE ACR_CM_CB 75 #define CACHE_PUSH 76 #else 77 #define CACHE_TYPE ACR_CM_WT 78 #endif 79 80 #ifdef CONFIG_COLDFIRE_SW_A7 81 #define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE) 82 #else 83 #define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP) 84 #endif 85 86 /* 87 * Unified cache means we will never need to flush for coherency of 88 * instruction fetch. We will need to flush to maintain memory/DMA 89 * coherency though in all cases. And for copyback caches we will need 90 * to push cached data as well. 91 */ 92 #define CACHE_INIT (CACHE_MODE + CACR_CINVA - CACR_EC) 93 #define CACHE_INVALIDATE (CACHE_MODE + CACR_CINVA) 94 #define CACHE_INVALIDATED (CACHE_MODE + CACR_CINVA) 95 96 #define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \ 97 (0x000f0000) + \ 98 (ACR_ENABLE + ACR_ANY + CACHE_TYPE)) 99 #define ACR1_MODE 0 100 101 /****************************************************************************/ 102 #endif /* m53xxsim_h */ 103
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.