1 /****************************************************************************/ 2 3 /* 4 * m54xxpci.h -- ColdFire 547x and 548x PCI bus support 5 * 6 * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org> 7 * 8 * This file is subject to the terms and conditions of the GNU General Public 9 * License. See the file COPYING in the main directory of this archive 10 * for more details. 11 */ 12 13 /****************************************************************************/ 14 #ifndef M54XXPCI_H 15 #define M54XXPCI_H 16 /****************************************************************************/ 17 18 /* 19 * The core set of PCI support registers are mapped into the MBAR region. 20 */ 21 #define PCIIDR (CONFIG_MBAR + 0xb00) /* PCI device/vendor ID */ 22 #define PCISCR (CONFIG_MBAR + 0xb04) /* PCI status/command */ 23 #define PCICCRIR (CONFIG_MBAR + 0xb08) /* PCI class/revision */ 24 #define PCICR1 (CONFIG_MBAR + 0xb0c) /* PCI configuration 1 */ 25 #define PCIBAR0 (CONFIG_MBAR + 0xb10) /* PCI base address 0 */ 26 #define PCIBAR1 (CONFIG_MBAR + 0xb14) /* PCI base address 1 */ 27 #define PCICCPR (CONFIG_MBAR + 0xb28) /* PCI cardbus CIS pointer */ 28 #define PCISID (CONFIG_MBAR + 0xb2c) /* PCI subsystem IDs */ 29 #define PCIERBAR (CONFIG_MBAR + 0xb30) /* PCI expansion ROM */ 30 #define PCICPR (CONFIG_MBAR + 0xb34) /* PCI capabilities pointer */ 31 #define PCICR2 (CONFIG_MBAR + 0xb3c) /* PCI configuration 2 */ 32 33 #define PCIGSCR (CONFIG_MBAR + 0xb60) /* Global status/control */ 34 #define PCITBATR0 (CONFIG_MBAR + 0xb64) /* Target base translation 0 */ 35 #define PCITBATR1 (CONFIG_MBAR + 0xb68) /* Target base translation 1 */ 36 #define PCITCR (CONFIG_MBAR + 0xb6c) /* Target control */ 37 #define PCIIW0BTAR (CONFIG_MBAR + 0xb70) /* Initiator window 0 */ 38 #define PCIIW1BTAR (CONFIG_MBAR + 0xb74) /* Initiator window 1 */ 39 #define PCIIW2BTAR (CONFIG_MBAR + 0xb78) /* Initiator window 2 */ 40 #define PCIIWCR (CONFIG_MBAR + 0xb80) /* Initiator window config */ 41 #define PCIICR (CONFIG_MBAR + 0xb84) /* Initiator control */ 42 #define PCIISR (CONFIG_MBAR + 0xb88) /* Initiator status */ 43 #define PCICAR (CONFIG_MBAR + 0xbf8) /* Configuration address */ 44 45 #define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */ 46 #define PCITSAR (CONFIG_MBAR + 0x8404) /* TX start address */ 47 #define PCITTCR (CONFIG_MBAR + 0x8408) /* TX transaction control */ 48 #define PCITER (CONFIG_MBAR + 0x840c) /* TX enables */ 49 #define PCITNAR (CONFIG_MBAR + 0x8410) /* TX next address */ 50 #define PCITLWR (CONFIG_MBAR + 0x8414) /* TX last word */ 51 #define PCITDCR (CONFIG_MBAR + 0x8418) /* TX done counts */ 52 #define PCITSR (CONFIG_MBAR + 0x841c) /* TX status */ 53 #define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */ 54 #define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */ 55 #define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */ 56 #define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */ 57 #define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */ 58 #define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */ 59 60 #define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */ 61 #define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */ 62 #define PCIRTCR (CONFIG_MBAR + 0x8488) /* RX transaction control */ 63 #define PCIRER (CONFIG_MBAR + 0x848c) /* RX enables */ 64 #define PCIRNAR (CONFIG_MBAR + 0x8490) /* RX next address */ 65 #define PCIRDCR (CONFIG_MBAR + 0x8498) /* RX done counts */ 66 #define PCIRSR (CONFIG_MBAR + 0x849c) /* RX status */ 67 #define PCIRFDR (CONFIG_MBAR + 0x84c0) /* RX FIFO data */ 68 #define PCIRFSR (CONFIG_MBAR + 0x84c4) /* RX FIFO status */ 69 #define PCIRFCR (CONFIG_MBAR + 0x84c8) /* RX FIFO control */ 70 #define PCIRFAR (CONFIG_MBAR + 0x84cc) /* RX FIFO alarm */ 71 #define PCIRFRPR (CONFIG_MBAR + 0x84d0) /* RX FIFO read pointer */ 72 #define PCIRFWPR (CONFIG_MBAR + 0x84d4) /* RX FIFO write pointer */ 73 74 #define PACR (CONFIG_MBAR + 0xc00) /* PCI arbiter control */ 75 #define PASR (CONFIG_MBAR + 0xc04) /* PCI arbiter status */ 76 77 /* 78 * Definitions for the Global status and control register. 79 */ 80 #define PCIGSCR_PE 0x20000000 /* Parity error detected */ 81 #define PCIGSCR_SE 0x10000000 /* System error detected */ 82 #define PCIGSCR_XCLKBIN 0x07000000 /* XLB2CLKIN mask */ 83 #define PCIGSCR_PEE 0x00002000 /* Parity error intr enable */ 84 #define PCIGSCR_SEE 0x00001000 /* System error intr enable */ 85 #define PCIGSCR_RESET 0x00000001 /* Reset bit */ 86 87 /* 88 * Bit definitions for the PCICAR configuration address register. 89 */ 90 #define PCICAR_E 0x80000000 /* Enable config space */ 91 #define PCICAR_BUSN 16 /* Move bus bits */ 92 #define PCICAR_DEVFNN 8 /* Move devfn bits */ 93 #define PCICAR_DWORDN 0 /* Move dword bits */ 94 95 /* 96 * The initiator windows hold the memory and IO mapping information. 97 * This macro creates the register values from the desired addresses. 98 */ 99 #define WXBTAR(hostaddr, pciaddr, size) \ 100 (((hostaddr) & 0xff000000) | \ 101 ((((size) - 1) & 0xff000000) >> 8) | \ 102 (((pciaddr) & 0xff000000) >> 16)) 103 104 #define PCIIWCR_W0_MEM 0x00000000 /* Window 0 is memory */ 105 #define PCIIWCR_W0_IO 0x08000000 /* Window 0 is IO */ 106 #define PCIIWCR_W0_MRD 0x00000000 /* Window 0 memory read */ 107 #define PCIIWCR_W0_MRDL 0x02000000 /* Window 0 memory read line */ 108 #define PCIIWCR_W0_MRDM 0x04000000 /* Window 0 memory read mult */ 109 #define PCIIWCR_W0_E 0x01000000 /* Window 0 enable */ 110 111 #define PCIIWCR_W1_MEM 0x00000000 /* Window 0 is memory */ 112 #define PCIIWCR_W1_IO 0x00080000 /* Window 0 is IO */ 113 #define PCIIWCR_W1_MRD 0x00000000 /* Window 0 memory read */ 114 #define PCIIWCR_W1_MRDL 0x00020000 /* Window 0 memory read line */ 115 #define PCIIWCR_W1_MRDM 0x00040000 /* Window 0 memory read mult */ 116 #define PCIIWCR_W1_E 0x00010000 /* Window 0 enable */ 117 118 /* 119 * Bit definitions for the PCIBATR registers. 120 */ 121 #define PCITBATR0_E 0x00000001 /* Enable window 0 */ 122 #define PCITBATR1_E 0x00000001 /* Enable window 1 */ 123 124 /* 125 * PCI arbiter support definitions and macros. 126 */ 127 #define PACR_INTMPRI 0x00000001 128 #define PACR_EXTMPRI(x) (((x) & 0x1f) << 1) 129 #define PACR_INTMINTE 0x00010000 130 #define PACR_EXTMINTE(x) (((x) & 0x1f) << 17) 131 #define PACR_PKMD 0x40000000 132 #define PACR_DS 0x80000000 133 134 #define PCICR1_CL(x) ((x) & 0xf) /* Cacheline size field */ 135 #define PCICR1_LT(x) (((x) & 0xff) << 8) /* Latency timer field */ 136 137 /****************************************************************************/ 138 #endif /* M54XXPCI_H */ 139
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.