1 # SPDX-License-Identifier: GPL-2.0 2 KBUILD_DEFCONFIG := mmu_defconfig 3 4 UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\" 5 6 # What CPU version are we building for, and crack it open 7 # as major.minor.rev 8 CPU_VER := $(CONFIG_XILINX_MICROBLAZE0_HW_VER) 9 CPU_MAJOR := $(word 1, $(subst ., , $(CPU_VER))) 10 CPU_MINOR := $(word 2, $(subst ., , $(CPU_VER))) 11 CPU_REV := $(word 3, $(subst ., , $(CPU_VER))) 12 13 export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV 14 15 # Use cpu-related CONFIG_ vars to set compile options. 16 # The various CONFIG_XILINX cpu features options are integers 0/1/2... 17 # rather than bools y/n 18 19 # Work out HW multipler support. This is tricky. 20 # 1. Spartan2 has no HW multipliers. 21 # 2. MicroBlaze v3.x always uses them, except in Spartan 2 22 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings 23 ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) 24 ifeq ($(CPU_MAJOR),3) 25 CPUFLAGS-1 += -mno-xl-soft-mul 26 else 27 # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support. 28 CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high 29 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul 30 endif 31 endif 32 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div 33 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift 34 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare 35 36 ifdef CONFIG_CPU_BIG_ENDIAN 37 KBUILD_CFLAGS += -mbig-endian 38 KBUILD_AFLAGS += -mbig-endian 39 KBUILD_LDFLAGS += -EB 40 else 41 KBUILD_CFLAGS += -mlittle-endian 42 KBUILD_AFLAGS += -mlittle-endian 43 KBUILD_LDFLAGS += -EL 44 endif 45 46 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) 47 48 # r31 holds current when in kernel mode 49 KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2) 50 51 libs-y += arch/microblaze/lib/ 52 53 boot := arch/microblaze/boot 54 55 # Are we making a simpleImage.<boardname> target? If so, crack out the boardname 56 DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS))) 57 58 export DTB 59 60 all: linux.bin 61 62 archheaders: 63 $(Q)$(MAKE) $(build)=arch/microblaze/kernel/syscalls all 64 65 PHONY += linux.bin linux.bin.gz linux.bin.ub 66 linux.bin.ub linux.bin.gz: linux.bin 67 linux.bin: vmlinux 68 linux.bin linux.bin.gz linux.bin.ub: 69 $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ 70 @echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')' 71 72 PHONY += simpleImage.$(DTB) 73 simpleImage.$(DTB): vmlinux 74 $(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip) 75 @echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')' 76 77 define archhelp 78 echo '* linux.bin - Create raw binary' 79 echo ' linux.bin.gz - Create compressed raw binary' 80 echo ' linux.bin.ub - Create U-Boot wrapped raw binary' 81 echo ' simpleImage.<dt> - Create the following images with <dt>.dtb linked in' 82 echo ' simpleImage.<dt> : raw image' 83 echo ' simpleImage.<dt>.ub : raw image with U-Boot header' 84 echo ' simpleImage.<dt>.unstrip: ELF (identical to vmlinux)' 85 echo ' simpleImage.<dt>.strip : stripped ELF' 86 echo ' Targets with <dt> embed a device tree blob inside the image' 87 echo ' These targets support board with firmware that does not' 88 echo ' support passing a device tree directly. Replace <dt> with the' 89 echo ' name of a dts file from the arch/microblaze/boot/dts/ directory' 90 echo ' (minus the .dts extension).' 91 endef 92 93 MRPROPER_FILES += $(boot)/simpleImage.*
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.