~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/mips/boot/dts/ingenic/cu1000-neo.dts

Version: ~ [ linux-6.11.5 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.58 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.114 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.169 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.228 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.284 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.322 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0
  2 /dts-v1/;
  3 
  4 #include "x1000.dtsi"
  5 #include <dt-bindings/gpio/gpio.h>
  6 #include <dt-bindings/clock/ingenic,sysost.h>
  7 #include <dt-bindings/interrupt-controller/irq.h>
  8 
  9 / {
 10         compatible = "yna,cu1000-neo", "ingenic,x1000e";
 11         model = "YSH & ATIL General Board CU1000-Neo";
 12 
 13         aliases {
 14                 serial2 = &uart2;
 15         };
 16 
 17         chosen {
 18                 stdout-path = "serial2:115200n8";
 19         };
 20 
 21         memory {
 22                 device_type = "memory";
 23                 reg = <0x0 0x04000000>;
 24         };
 25 
 26         leds {
 27                 compatible = "gpio-leds";
 28                 led-0 {
 29                         gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
 30                         linux,default-trigger = "mmc0";
 31                 };
 32         };
 33 
 34         wlan_pwrseq: msc1-pwrseq {
 35                 compatible = "mmc-pwrseq-simple";
 36 
 37                 reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
 38                 post-power-on-delay-ms = <200>;
 39         };
 40 };
 41 
 42 &exclk {
 43         clock-frequency = <24000000>;
 44 };
 45 
 46 &cgu {
 47         /*
 48          * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
 49          * precision.
 50          */
 51         assigned-clocks = <&cgu X1000_CLK_RTC>;
 52         assigned-clock-parents = <&cgu X1000_CLK_RTCLK>;
 53 };
 54 
 55 &ost {
 56         /* 1500 kHz for the system timer and clocksource */
 57         assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
 58         assigned-clock-rates = <1500000>, <1500000>;
 59 };
 60 
 61 &uart2 {
 62         status = "okay";
 63 
 64         pinctrl-names = "default";
 65         pinctrl-0 = <&pins_uart2>;
 66 };
 67 
 68 &ssi {
 69         status = "okay";
 70 
 71         num-cs = <2>;
 72         cs-gpios = <0>, <&gpc 20 GPIO_ACTIVE_LOW>;
 73 
 74         pinctrl-names = "default";
 75         pinctrl-0 = <&pins_ssi>;
 76 
 77         sc16is752: expander@0 {
 78                 compatible = "nxp,sc16is752";
 79                 reg = <0>; /* CE0 */
 80 
 81                 spi-rx-bus-width = <1>;
 82                 spi-tx-bus-width = <1>;
 83                 spi-max-frequency = <4000000>;
 84 
 85                 clocks = <&exclk_sc16is752>;
 86 
 87                 interrupt-parent = <&gpc>;
 88                 interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 89 
 90                 gpio-controller;
 91                 #gpio-cells = <2>;
 92 
 93                 exclk_sc16is752: sc16is752 {
 94                         compatible = "fixed-clock";
 95                         #clock-cells = <0>;
 96                         clock-frequency = <48000000>;
 97                 };
 98         };
 99 };
100 
101 &i2c0 {
102         status = "okay";
103 
104         clock-frequency = <400000>;
105 
106         pinctrl-names = "default";
107         pinctrl-0 = <&pins_i2c0>;
108 
109         ads7830: adc@48 {
110                 compatible = "ti,ads7830";
111                 reg = <0x48>;
112         };
113 };
114 
115 &msc0 {
116         status = "okay";
117 
118         bus-width = <8>;
119         max-frequency = <50000000>;
120 
121         pinctrl-names = "default";
122         pinctrl-0 = <&pins_msc0>;
123 
124         non-removable;
125 };
126 
127 &msc1 {
128         status = "okay";
129 
130         #address-cells = <1>;
131         #size-cells = <0>;
132         bus-width = <4>;
133         max-frequency = <50000000>;
134 
135         pinctrl-names = "default";
136         pinctrl-0 = <&pins_msc1>;
137 
138         non-removable;
139 
140         mmc-pwrseq = <&wlan_pwrseq>;
141 
142         ap6212a: wifi@1 {
143                 compatible = "brcm,bcm4329-fmac";
144                 reg = <1>;
145 
146                 interrupt-parent = <&gpc>;
147                 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
148                 interrupt-names = "host-wake";
149 
150                 brcm,drive-strength = <10>;
151         };
152 };
153 
154 &mac {
155         status = "okay";
156 
157         phy-mode = "rmii";
158         phy-handle = <&lan8720a>;
159 
160         pinctrl-names = "default";
161         pinctrl-0 = <&pins_mac>;
162 
163         snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
164         snps,reset-active-low;
165         snps,reset-delays-us = <0 10000 30000>;
166 };
167 
168 &mdio {
169         status = "okay";
170 
171         lan8720a: ethernet-phy@0 {
172                 compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
173                 reg = <0>;
174         };
175 };
176 
177 &otg_phy {
178         status = "okay";
179 };
180 
181 &otg {
182         status = "okay";
183 };
184 
185 &pinctrl {
186         pins_uart2: uart2 {
187                 function = "uart2";
188                 groups = "uart2-data-d";
189                 bias-pull-up;
190         };
191 
192         pins_ssi: ssi {
193                 function = "ssi";
194                 groups = "ssi-dt-d", "ssi-dr-d", "ssi-clk-d", "ssi-ce0-d";
195                 bias-disable;
196         };
197 
198         pins_i2c0: i2c0 {
199                 function = "i2c0";
200                 groups = "i2c0-data";
201                 bias-pull-up;
202         };
203 
204         pins_msc0: msc0 {
205                 function = "mmc0";
206                 groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
207                 bias-disable;
208         };
209 
210         pins_msc1: msc1 {
211                 function = "mmc1";
212                 groups = "mmc1-1bit", "mmc1-4bit";
213                 bias-disable;
214         };
215 
216         pins_mac: mac {
217                 function = "mac";
218                 groups = "mac";
219                 bias-disable;
220         };
221 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php