~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/mips/boot/dts/ingenic/cu1830-neo.dts

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0
  2 /dts-v1/;
  3 
  4 #include "x1830.dtsi"
  5 #include <dt-bindings/gpio/gpio.h>
  6 #include <dt-bindings/clock/ingenic,sysost.h>
  7 #include <dt-bindings/interrupt-controller/irq.h>
  8 
  9 / {
 10         compatible = "yna,cu1830-neo", "ingenic,x1830";
 11         model = "YSH & ATIL General Board CU1830-Neo";
 12 
 13         aliases {
 14                 serial1 = &uart1;
 15         };
 16 
 17         chosen {
 18                 stdout-path = "serial1:115200n8";
 19         };
 20 
 21         memory {
 22                 device_type = "memory";
 23                 reg = <0x0 0x08000000>;
 24         };
 25 
 26         leds {
 27                 compatible = "gpio-leds";
 28                 led-0 {
 29                         gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
 30                         linux,default-trigger = "mmc0";
 31                 };
 32         };
 33 
 34         wlan_pwrseq: msc1-pwrseq {
 35                 compatible = "mmc-pwrseq-simple";
 36 
 37                 reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
 38                 post-power-on-delay-ms = <200>;
 39         };
 40 };
 41 
 42 &exclk {
 43         clock-frequency = <24000000>;
 44 };
 45 
 46 &cgu {
 47         /*
 48          * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
 49          * precision.
 50          */
 51         assigned-clocks = <&cgu X1830_CLK_RTC>;
 52         assigned-clock-parents = <&cgu X1830_CLK_RTCLK>;
 53 };
 54 
 55 &ost {
 56         /* 1500 kHz for the system timer and clocksource */
 57         assigned-clocks = <&ost OST_CLK_EVENT_TIMER>, <&ost OST_CLK_GLOBAL_TIMER>;
 58         assigned-clock-rates = <1500000>, <1500000>;
 59 };
 60 
 61 &uart1 {
 62         status = "okay";
 63 
 64         pinctrl-names = "default";
 65         pinctrl-0 = <&pins_uart1>;
 66 };
 67 
 68 &ssi0 {
 69         status = "okay";
 70 
 71         num-cs = <2>;
 72 
 73         pinctrl-names = "default";
 74         pinctrl-0 = <&pins_ssi0>;
 75 
 76         sc16is752: expander@0 {
 77                 compatible = "nxp,sc16is752";
 78                 reg = <0>; /* CE0 */
 79 
 80                 spi-rx-bus-width = <1>;
 81                 spi-tx-bus-width = <1>;
 82                 spi-max-frequency = <4000000>;
 83 
 84                 clocks = <&exclk_sc16is752>;
 85 
 86                 interrupt-parent = <&gpb>;
 87                 interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
 88 
 89                 gpio-controller;
 90                 #gpio-cells = <2>;
 91 
 92                 exclk_sc16is752: sc16is752 {
 93                         compatible = "fixed-clock";
 94                         #clock-cells = <0>;
 95                         clock-frequency = <48000000>;
 96                 };
 97         };
 98 };
 99 
100 &i2c0 {
101         status = "okay";
102 
103         clock-frequency = <400000>;
104 
105         pinctrl-names = "default";
106         pinctrl-0 = <&pins_i2c0>;
107 
108         ads7830: adc@48 {
109                 compatible = "ti,ads7830";
110                 reg = <0x48>;
111         };
112 };
113 
114 &dtrng {
115         status = "okay";
116 };
117 
118 &msc0 {
119         status = "okay";
120 
121         bus-width = <4>;
122         max-frequency = <50000000>;
123 
124         pinctrl-names = "default";
125         pinctrl-0 = <&pins_msc0>;
126 
127         non-removable;
128 };
129 
130 &msc1 {
131         status = "okay";
132 
133         #address-cells = <1>;
134         #size-cells = <0>;
135         bus-width = <4>;
136         max-frequency = <50000000>;
137 
138         pinctrl-names = "default";
139         pinctrl-0 = <&pins_msc1>;
140 
141         non-removable;
142 
143         mmc-pwrseq = <&wlan_pwrseq>;
144 
145         ap6212a: wifi@1 {
146                 compatible = "brcm,bcm4329-fmac";
147                 reg = <1>;
148 
149                 interrupt-parent = <&gpc>;
150                 interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
151                 interrupt-names = "host-wake";
152 
153                 brcm,drive-strength = <10>;
154         };
155 };
156 
157 &mac {
158         status = "okay";
159 
160         phy-mode = "rmii";
161         phy-handle = <&ip101gr>;
162 
163         pinctrl-names = "default";
164         pinctrl-0 = <&pins_mac>;
165 
166         snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
167         snps,reset-active-low;
168         snps,reset-delays-us = <0 10000 30000>;
169 };
170 
171 &mdio {
172         status = "okay";
173 
174         ip101gr: ethernet-phy@0 {
175                 compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
176                 reg = <0>;
177         };
178 };
179 
180 &otg_phy {
181         status = "okay";
182 };
183 
184 &otg {
185         status = "okay";
186 };
187 
188 &pinctrl {
189         pins_uart1: uart1 {
190                 function = "uart1";
191                 groups = "uart1-data";
192                 bias-pull-up;
193         };
194 
195         pins_ssi0: ssi0 {
196                 function = "ssi0";
197                 groups = "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-ce0", "ssi0-ce1";
198                 bias-disable;
199         };
200 
201         pins_i2c0: i2c0 {
202                 function = "i2c0";
203                 groups = "i2c0-data";
204                 bias-pull-up;
205         };
206 
207         pins_msc0: msc0 {
208                 function = "mmc0";
209                 groups = "mmc0-1bit", "mmc0-4bit";
210                 bias-disable;
211         };
212 
213         pins_msc1: msc1 {
214                 function = "mmc1";
215                 groups = "mmc1-1bit", "mmc1-4bit";
216                 bias-disable;
217         };
218 
219         pins_mac: mac {
220                 function = "mac";
221                 groups = "mac";
222                 bias-disable;
223         };
224 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php