1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/clock/ingenic,tcu.h>
3 #include <dt-bindings/clock/ingenic,x1000-cgu.h>
4 #include <dt-bindings/dma/x1000-dma.h>
5
6 / {
7 #address-cells = <1>;
8 #size-cells = <1>;
9 compatible = "ingenic,x1000", "ingenic,x1000e";
10
11 cpus {
12 #address-cells = <1>;
13 #size-cells = <0>;
14
15 cpu0: cpu@0 {
16 device_type = "cpu";
17 compatible = "ingenic,xburst-fpu1.0-mxu1.1";
18 reg = <0>;
19
20 clocks = <&cgu X1000_CLK_CPU>;
21 clock-names = "cpu";
22 };
23 };
24
25 cpuintc: interrupt-controller {
26 #address-cells = <0>;
27 #interrupt-cells = <1>;
28 interrupt-controller;
29 compatible = "mti,cpu-interrupt-controller";
30 };
31
32 intc: interrupt-controller@10001000 {
33 compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
34 reg = <0x10001000 0x50>;
35
36 interrupt-controller;
37 #interrupt-cells = <1>;
38
39 interrupt-parent = <&cpuintc>;
40 interrupts = <2>;
41 };
42
43 exclk: ext {
44 compatible = "fixed-clock";
45 #clock-cells = <0>;
46 };
47
48 rtclk: rtc {
49 compatible = "fixed-clock";
50 #clock-cells = <0>;
51 clock-frequency = <32768>;
52 };
53
54 cgu: x1000-cgu@10000000 {
55 compatible = "ingenic,x1000-cgu", "simple-mfd";
56 reg = <0x10000000 0x100>;
57 #address-cells = <1>;
58 #size-cells = <1>;
59 ranges = <0x0 0x10000000 0x100>;
60
61 #clock-cells = <1>;
62
63 clocks = <&exclk>, <&rtclk>;
64 clock-names = "ext", "rtc";
65
66 otg_phy: usb-phy@3c {
67 compatible = "ingenic,x1000-phy";
68 reg = <0x3c 0x10>;
69
70 clocks = <&cgu X1000_CLK_OTGPHY>;
71
72 #phy-cells = <0>;
73
74 status = "disabled";
75 };
76
77 rng: rng@d8 {
78 compatible = "ingenic,x1000-rng";
79 reg = <0xd8 0x8>;
80
81 status = "disabled";
82 };
83
84 mac_phy_ctrl: mac-phy-ctrl@e8 {
85 compatible = "syscon";
86 reg = <0xe8 0x4>;
87 };
88 };
89
90 ost: timer@12000000 {
91 compatible = "ingenic,x1000-ost";
92 reg = <0x12000000 0x3c>;
93
94 #clock-cells = <1>;
95
96 clocks = <&cgu X1000_CLK_OST>;
97 clock-names = "ost";
98
99 interrupt-parent = <&cpuintc>;
100 interrupts = <3>;
101 };
102
103 tcu: timer@10002000 {
104 compatible = "ingenic,x1000-tcu", "simple-mfd";
105 reg = <0x10002000 0x1000>;
106 #address-cells = <1>;
107 #size-cells = <1>;
108 ranges = <0x0 0x10002000 0x1000>;
109
110 #clock-cells = <1>;
111
112 clocks = <&cgu X1000_CLK_RTCLK>,
113 <&cgu X1000_CLK_EXCLK>,
114 <&cgu X1000_CLK_PCLK>,
115 <&cgu X1000_CLK_TCU>;
116 clock-names = "rtc", "ext", "pclk", "tcu";
117
118 interrupt-controller;
119 #interrupt-cells = <1>;
120
121 interrupt-parent = <&intc>;
122 interrupts = <27 26 25>;
123
124 wdt: watchdog@0 {
125 compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
126 reg = <0x0 0x10>;
127
128 clocks = <&tcu TCU_CLK_WDT>;
129 clock-names = "wdt";
130 };
131
132 pwm: pwm@40 {
133 compatible = "ingenic,x1000-pwm";
134 reg = <0x40 0x50>;
135
136 #pwm-cells = <3>;
137
138 clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
139 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
140 <&tcu TCU_CLK_TIMER4>;
141 clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
142 };
143 };
144
145 rtc: rtc@10003000 {
146 compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
147 reg = <0x10003000 0x4c>;
148
149 interrupt-parent = <&intc>;
150 interrupts = <32>;
151
152 clocks = <&cgu X1000_CLK_RTCLK>;
153 clock-names = "rtc";
154 };
155
156 pinctrl: pin-controller@10010000 {
157 compatible = "ingenic,x1000-pinctrl";
158 reg = <0x10010000 0x800>;
159 #address-cells = <1>;
160 #size-cells = <0>;
161
162 gpa: gpio@0 {
163 compatible = "ingenic,x1000-gpio";
164 reg = <0>;
165
166 gpio-controller;
167 gpio-ranges = <&pinctrl 0 0 32>;
168 #gpio-cells = <2>;
169
170 interrupt-controller;
171 #interrupt-cells = <2>;
172
173 interrupt-parent = <&intc>;
174 interrupts = <17>;
175 };
176
177 gpb: gpio@1 {
178 compatible = "ingenic,x1000-gpio";
179 reg = <1>;
180
181 gpio-controller;
182 gpio-ranges = <&pinctrl 0 32 32>;
183 #gpio-cells = <2>;
184
185 interrupt-controller;
186 #interrupt-cells = <2>;
187
188 interrupt-parent = <&intc>;
189 interrupts = <16>;
190 };
191
192 gpc: gpio@2 {
193 compatible = "ingenic,x1000-gpio";
194 reg = <2>;
195
196 gpio-controller;
197 gpio-ranges = <&pinctrl 0 64 32>;
198 #gpio-cells = <2>;
199
200 interrupt-controller;
201 #interrupt-cells = <2>;
202
203 interrupt-parent = <&intc>;
204 interrupts = <15>;
205 };
206
207 gpd: gpio@3 {
208 compatible = "ingenic,x1000-gpio";
209 reg = <3>;
210
211 gpio-controller;
212 gpio-ranges = <&pinctrl 0 96 32>;
213 #gpio-cells = <2>;
214
215 interrupt-controller;
216 #interrupt-cells = <2>;
217
218 interrupt-parent = <&intc>;
219 interrupts = <14>;
220 };
221 };
222
223 uart0: serial@10030000 {
224 compatible = "ingenic,x1000-uart";
225 reg = <0x10030000 0x100>;
226
227 interrupt-parent = <&intc>;
228 interrupts = <51>;
229
230 clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
231 clock-names = "baud", "module";
232
233 status = "disabled";
234 };
235
236 uart1: serial@10031000 {
237 compatible = "ingenic,x1000-uart";
238 reg = <0x10031000 0x100>;
239
240 interrupt-parent = <&intc>;
241 interrupts = <50>;
242
243 clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
244 clock-names = "baud", "module";
245
246 status = "disabled";
247 };
248
249 uart2: serial@10032000 {
250 compatible = "ingenic,x1000-uart";
251 reg = <0x10032000 0x100>;
252
253 interrupt-parent = <&intc>;
254 interrupts = <49>;
255
256 clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
257 clock-names = "baud", "module";
258
259 status = "disabled";
260 };
261
262 ssi: spi@10043000 {
263 compatible = "ingenic,x1000-spi";
264 reg = <0x10043000 0x20>;
265 #address-cells = <1>;
266 #size-cells = <0>;
267
268 interrupt-parent = <&intc>;
269 interrupts = <8>;
270
271 clocks = <&cgu X1000_CLK_SSI>;
272 clock-names = "spi";
273
274 dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>,
275 <&pdma X1000_DMA_SSI0_TX 0xffffffff>;
276 dma-names = "rx", "tx";
277
278 status = "disabled";
279 };
280
281 i2c0: i2c-controller@10050000 {
282 compatible = "ingenic,x1000-i2c";
283 reg = <0x10050000 0x1000>;
284 #address-cells = <1>;
285 #size-cells = <0>;
286
287 interrupt-parent = <&intc>;
288 interrupts = <60>;
289
290 clocks = <&cgu X1000_CLK_I2C0>;
291
292 status = "disabled";
293 };
294
295 i2c1: i2c-controller@10051000 {
296 compatible = "ingenic,x1000-i2c";
297 reg = <0x10051000 0x1000>;
298 #address-cells = <1>;
299 #size-cells = <0>;
300
301 interrupt-parent = <&intc>;
302 interrupts = <59>;
303
304 clocks = <&cgu X1000_CLK_I2C1>;
305
306 status = "disabled";
307 };
308
309 i2c2: i2c-controller@10052000 {
310 compatible = "ingenic,x1000-i2c";
311 reg = <0x10052000 0x1000>;
312 #address-cells = <1>;
313 #size-cells = <0>;
314
315 interrupt-parent = <&intc>;
316 interrupts = <58>;
317
318 clocks = <&cgu X1000_CLK_I2C2>;
319
320 status = "disabled";
321 };
322
323 pdma: dma-controller@13420000 {
324 compatible = "ingenic,x1000-dma";
325 reg = <0x13420000 0x400>, <0x13421000 0x40>;
326
327 #dma-cells = <2>;
328
329 interrupt-parent = <&intc>;
330 interrupts = <10>;
331
332 clocks = <&cgu X1000_CLK_PDMA>;
333 };
334
335 msc0: mmc@13450000 {
336 compatible = "ingenic,x1000-mmc";
337 reg = <0x13450000 0x1000>;
338
339 interrupt-parent = <&intc>;
340 interrupts = <37>;
341
342 clocks = <&cgu X1000_CLK_MSC0>;
343 clock-names = "mmc";
344
345 cap-sd-highspeed;
346 cap-mmc-highspeed;
347 cap-sdio-irq;
348
349 dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
350 <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
351 dma-names = "rx", "tx";
352
353 status = "disabled";
354 };
355
356 msc1: mmc@13460000 {
357 compatible = "ingenic,x1000-mmc";
358 reg = <0x13460000 0x1000>;
359
360 interrupt-parent = <&intc>;
361 interrupts = <36>;
362
363 clocks = <&cgu X1000_CLK_MSC1>;
364 clock-names = "mmc";
365
366 cap-sd-highspeed;
367 cap-mmc-highspeed;
368 cap-sdio-irq;
369
370 dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
371 <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
372 dma-names = "rx", "tx";
373
374 status = "disabled";
375 };
376
377 mac: ethernet@134b0000 {
378 compatible = "ingenic,x1000-mac", "snps,dwmac";
379 reg = <0x134b0000 0x2000>;
380
381 interrupt-parent = <&intc>;
382 interrupts = <55>;
383 interrupt-names = "macirq";
384
385 clocks = <&cgu X1000_CLK_MAC>;
386 clock-names = "stmmaceth";
387
388 mode-reg = <&mac_phy_ctrl>;
389
390 status = "disabled";
391
392 mdio: mdio {
393 compatible = "snps,dwmac-mdio";
394 #address-cells = <1>;
395 #size-cells = <0>;
396
397 status = "disabled";
398 };
399 };
400
401 otg: usb@13500000 {
402 compatible = "ingenic,x1000-otg";
403 reg = <0x13500000 0x40000>;
404
405 interrupt-parent = <&intc>;
406 interrupts = <21>;
407
408 clocks = <&cgu X1000_CLK_OTG>;
409 clock-names = "otg";
410
411 phys = <&otg_phy>;
412 phy-names = "usb2-phy";
413
414 g-rx-fifo-size = <768>;
415 g-np-tx-fifo-size = <256>;
416 g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
417
418 status = "disabled";
419 };
420
421 aic: audio-controller@10020000 {
422 compatible = "ingenic,x1000-i2s";
423 reg = <0x10020000 0x38>;
424
425 #sound-dai-cells = <0>;
426
427 interrupt-parent = <&intc>;
428 interrupts = <1>;
429
430 clocks = <&cgu X1000_CLK_AIC>,
431 <&cgu X1000_CLK_I2S>;
432 clock-names = "aic", "i2s";
433
434 dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>,
435 <&pdma X1000_DMA_I2S0_TX 0xffffffff>;
436 dma-names = "rx", "tx";
437 };
438 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.