1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Derived from IRIX <sys/SN/klconfig.h>.
7 *
8 * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
9 * Copyright (C) 1999, 2000 by Ralf Baechle
10 */
11 #ifndef _ASM_SN_KLCONFIG_H
12 #define _ASM_SN_KLCONFIG_H
13
14 /*
15 * The KLCONFIG structures store info about the various BOARDs found
16 * during Hardware Discovery. In addition, it stores info about the
17 * components found on the BOARDs.
18 */
19
20 /*
21 * WARNING:
22 * Certain assembly language routines (notably xxxxx.s) in the IP27PROM
23 * will depend on the format of the data structures in this file. In
24 * most cases, rearranging the fields can seriously break things.
25 * Adding fields in the beginning or middle can also break things.
26 * Add fields if necessary, to the end of a struct in such a way
27 * that offsets of existing fields do not change.
28 */
29
30 #include <linux/types.h>
31 #include <asm/sn/types.h>
32
33 #if defined(CONFIG_SGI_IP27)
34
35 #include <asm/sn/sn0/addrs.h>
36 //#include <sys/SN/router.h>
37 // XXX Stolen from <sys/SN/router.h>:
38 #define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */
39 #include <asm/sn/fru.h>
40 //#include <sys/graph.h>
41 //#include <sys/xtalk/xbow.h>
42
43 #elif defined(CONFIG_SGI_IP35)
44
45 #include <asm/sn/sn1/addrs.h>
46 #include <sys/sn/router.h>
47 #include <sys/graph.h>
48 #include <asm/xtalk/xbow.h>
49
50 #endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
51
52 #if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
53 #include <asm/sn/agent.h>
54 #include <asm/fw/arc/types.h>
55 #include <asm/fw/arc/hinv.h>
56 #if defined(CONFIG_SGI_IP35)
57 // The hack file has to be before vector and after sn0_fru....
58 #include <asm/hack.h>
59 #include <asm/sn/vector.h>
60 #include <asm/xtalk/xtalk.h>
61 #endif /* CONFIG_SGI_IP35 */
62 #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
63
64 typedef u64 nic_t;
65
66 #define KLCFGINFO_MAGIC 0xbeedbabe
67
68 typedef s32 klconf_off_t;
69
70 /*
71 * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
72 */
73 #define MAX_MODULE_ID 255
74 #define SIZE_PAD 4096 /* 4k padding for structures */
75 /*
76 * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
77 * 2 Midplanes assuming no pci card cages
78 */
79 #define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2)
80
81 /* XXX if each node is guaranteed to have some memory */
82
83 #define MAX_PCI_DEVS 8
84
85 /* lboard_t->brd_flags fields */
86 /* All bits in this field are currently used. Try the pad fields if
87 you need more flag bits */
88
89 #define ENABLE_BOARD 0x01
90 #define FAILED_BOARD 0x02
91 #define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which
92 are discovered twice. Use one of them */
93 #define VISITED_BOARD 0x08 /* Used for compact hub numbering. */
94 #define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */
95 #define GLOBAL_MASTER_IO6 0x20
96 #define THIRD_NIC_PRESENT 0x40 /* for future use */
97 #define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */
98
99 /* klinfo->flags fields */
100
101 #define KLINFO_ENABLE 0x01 /* This component is enabled */
102 #define KLINFO_FAILED 0x02 /* This component failed */
103 #define KLINFO_DEVICE 0x04 /* This component is a device */
104 #define KLINFO_VISITED 0x08 /* This component has been visited */
105 #define KLINFO_CONTROLLER 0x10 /* This component is a device controller */
106 #define KLINFO_INSTALL 0x20 /* Install a driver */
107 #define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */
108 #define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
109
110 #define GB2 0x80000000
111
112 #define MAX_RSV_PTRS 32
113
114 /* Structures to manage various data storage areas */
115 /* The numbers must be contiguous since the array index i
116 is used in the code to allocate various areas.
117 */
118
119 #define BOARD_STRUCT 0
120 #define COMPONENT_STRUCT 1
121 #define ERRINFO_STRUCT 2
122 #define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1)
123 #define DEVICE_STRUCT 3
124
125
126 typedef struct console_s {
127 unsigned long uart_base;
128 unsigned long config_base;
129 unsigned long memory_base;
130 short baud;
131 short flag;
132 int type;
133 nasid_t nasid;
134 char wid;
135 char npci;
136 nic_t baseio_nic;
137 } console_t;
138
139 typedef struct klc_malloc_hdr {
140 klconf_off_t km_base;
141 klconf_off_t km_limit;
142 klconf_off_t km_current;
143 } klc_malloc_hdr_t;
144
145 /* Functions/macros needed to use this structure */
146
147 typedef struct kl_config_hdr {
148 u64 ch_magic; /* set this to KLCFGINFO_MAGIC */
149 u32 ch_version; /* structure version number */
150 klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
151 klconf_off_t ch_cons_off; /* offset of ch_cons */
152 klconf_off_t ch_board_info; /* the link list of boards */
153 console_t ch_cons_info; /* address info of the console */
154 klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
155 confidence_t ch_sw_belief; /* confidence that software is bad*/
156 confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */
157 } kl_config_hdr_t;
158
159
160 #define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
161 #define KL_CONFIG_INFO_OFFSET(_nasid) \
162 (KL_CONFIG_HDR(_nasid)->ch_board_info)
163 #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \
164 (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
165
166 #define KL_CONFIG_INFO(_nasid) \
167 (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \
168 NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
169 0)
170 #define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic)
171
172 #define KL_CONFIG_CHECK_MAGIC(_nasid) \
173 (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
174
175 #define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \
176 (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
177
178 /* --- New Macros for the changed kl_config_hdr_t structure --- */
179
180 #define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\
181 ((unsigned long)_k + (_k->ch_malloc_hdr_off)))
182
183 #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
184
185 #define PTR_CH_CONS_INFO(_k) ((console_t *)\
186 ((unsigned long)_k + (_k->ch_cons_off)))
187
188 #define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
189
190 /* ------------------------------------------------------------- */
191
192 #define KL_CONFIG_INFO_START(_nasid) \
193 (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
194
195 #define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid)
196 #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off))
197
198 #define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
199
200 #define XBOW_PORT_TYPE_HUB(_xbowp, _link) \
201 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
202 #define XBOW_PORT_TYPE_IO(_xbowp, _link) \
203 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
204
205 #define XBOW_PORT_IS_ENABLED(_xbowp, _link) \
206 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
207 #define XBOW_PORT_NASID(_xbowp, _link) \
208 ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
209
210 #define XBOW_PORT_IO 0x1
211 #define XBOW_PORT_HUB 0x2
212 #define XBOW_PORT_ENABLE 0x4
213
214 #define SN0_PORT_FENCE_SHFT 0
215 #define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT)
216
217 /*
218 * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
219 * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
220 * the LOCAL/current NODE. REMOTE means it is attached to a different
221 * node.(TBD - Need a way to treat ROUTER boards.)
222 *
223 * There are 2 different structures to represent these boards -
224 * lboard - Local board, rboard - remote board. These 2 structures
225 * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
226 * Figure below). The first byte of the rboard or lboard structure
227 * is used to find out its type - no unions are used.
228 * If it is a lboard, then the config info of this board will be found
229 * on the local node. (LOCAL NODE BASE + offset value gives pointer to
230 * the structure.
231 * If it is a rboard, the local structure contains the node number
232 * and the offset of the beginning of the LINKED LIST on the remote node.
233 * The details of the hardware on a remote node can be built locally,
234 * if required, by reading the LINKED LIST on the remote node and
235 * ignoring all the rboards on that node.
236 *
237 * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
238 * First board info on the remote node. The remote node list is
239 * traversed as the local list, using the REMOTE BASE ADDRESS and not
240 * the local base address and ignoring all rboard values.
241 *
242 *
243 KLCONFIG
244
245 +------------+ +------------+ +------------+ +------------+
246 | lboard | +-->| lboard | +-->| rboard | +-->| lboard |
247 +------------+ | +------------+ | +------------+ | +------------+
248 | board info | | | board info | | |errinfo,bptr| | | board info |
249 +------------+ | +------------+ | +------------+ | +------------+
250 | offset |--+ | offset |--+ | offset |--+ |offset=NULL |
251 +------------+ +------------+ +------------+ +------------+
252
253
254 +------------+
255 | board info |
256 +------------+ +--------------------------------+
257 | compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
258 +------------+ +--------------------------------+
259 | compt 2 |--+
260 +------------+ | +--------------------------------+
261 | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
262 +------------+ +--------------------------------+
263 | errinfo |--+
264 +------------+ | +--------------------------------+
265 +--->|r/l brd errinfo,compt err flags |
266 +--------------------------------+
267
268 *
269 * Each BOARD consists of COMPONENTs and the BOARD structure has
270 * pointers (offsets) to its COMPONENT structure.
271 * The COMPONENT structure has version info, size and speed info, revision,
272 * error info and the NIC info. This structure can accommodate any
273 * BOARD with arbitrary COMPONENT composition.
274 *
275 * The ERRORINFO part of each BOARD has error information
276 * that describes errors about the BOARD itself. It also has flags to
277 * indicate the COMPONENT(s) on the board that have errors. The error
278 * information specific to the COMPONENT is present in the respective
279 * COMPONENT structure.
280 *
281 * The ERRORINFO structure is also treated like a COMPONENT, ie. the
282 * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
283 * structure also has a pointer to the ERRORINFO structure. This is
284 * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
285 * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
286 * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
287 * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
288 * which is present on the REMOTE NODE.(TBD)
289 * REMOTE ERRINFO can be stored on any of the nearest nodes
290 * or on all the nearest nodes.(TBD)
291 * Like BOARD structures, REMOTE ERRINFO structures can be built locally
292 * using the rboard errinfo pointer.
293 *
294 * In order to get useful information from this Data organization, a set of
295 * interface routines are provided (TBD). The important thing to remember while
296 * manipulating the structures, is that, the NODE number information should
297 * be used. If the NODE is non-zero (remote) then each offset should
298 * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
299 * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
300 *
301 * Note that these structures do not provide much info about connectivity.
302 * That info will be part of HWGRAPH, which is an extension of the cfg_t
303 * data structure. (ref IP27prom/cfg.h) It has to be extended to include
304 * the IO part of the Network(TBD).
305 *
306 * The data structures below define the above concepts.
307 */
308
309 /*
310 * Values for CPU types
311 */
312 #define KL_CPU_R4000 0x1 /* Standard R4000 */
313 #define KL_CPU_TFP 0x2 /* TFP processor */
314 #define KL_CPU_R10000 0x3 /* R10000 (T5) */
315 #define KL_CPU_NONE (-1) /* no cpu present in slot */
316
317 /*
318 * IP27 BOARD classes
319 */
320
321 #define KLCLASS_MASK 0xf0
322 #define KLCLASS_NONE 0x00
323 #define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
324 #define KLCLASS_CPU KLCLASS_NODE
325 #define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
326 and the non-graphics widget boards */
327 #define KLCLASS_ROUTER 0x30 /* Router board */
328 #define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
329 so that we can record error info */
330 #define KLCLASS_GFX 0x50 /* graphics boards */
331
332 #define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx
333 * hw ifc to xtalk and are not gfx
334 * class for sw purposes */
335
336 #define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */
337 #define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */
338
339 #define KLCLASS_UNKNOWN 0xf0
340
341 #define KLCLASS(_x) ((_x) & KLCLASS_MASK)
342
343 /*
344 * IP27 board types
345 */
346
347 #define KLTYPE_MASK 0x0f
348 #define KLTYPE_NONE 0x00
349 #define KLTYPE_EMPTY 0x00
350
351 #define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
352 #define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
353
354 #define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0)
355 #define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
356 #define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */
357 #define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2)
358 #define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */
359 #define KLTYPE_ETHERNET (KLCLASS_IO | 0x3)
360 #define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */
361 #define KLTYPE_FDDI (KLCLASS_IO | 0x4)
362 #define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */
363 #define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */
364 #define KLTYPE_PCI KLTYPE_HAROLD
365 #define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */
366 #define KLTYPE_MIO (KLCLASS_IO | 0x8)
367 #define KLTYPE_FC (KLCLASS_IO | 0x9)
368 #define KLTYPE_LINC (KLCLASS_IO | 0xA)
369 #define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */
370 #define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */
371 #define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */
372
373 #define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */
374 #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
375 #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
376
377 #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
378 #define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
379 #define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */
380 #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
381 #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
382
383 #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
384 #define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
385 #define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8
386 #define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
387
388 #define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
389 #define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1)
390 #define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2)
391 #define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3)
392
393 #define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK
394
395 /* The value of type should be more than 8 so that hinv prints
396 * out the board name from the NIC string. For values less than
397 * 8 the name of the board needs to be hard coded in a few places.
398 * When bringup started nic names had not standardized and so we
399 * had to hard code. (For people interested in history.)
400 */
401 #define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9)
402
403 #define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf)
404
405 #define KLTYPE(_x) ((_x) & KLTYPE_MASK)
406 #define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \
407 (l->brd_flags & SECOND_NIC_PRESENT))
408 #define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2))
409
410 /*
411 * board structures
412 */
413
414 #define MAX_COMPTS_PER_BRD 24
415
416 #define LOCAL_BOARD 1
417 #define REMOTE_BOARD 2
418
419 #define LBOARD_STRUCT_VERSION 2
420
421 typedef struct lboard_s {
422 klconf_off_t brd_next; /* Next BOARD */
423 unsigned char struct_type; /* type of structure, local or remote */
424 unsigned char brd_type; /* type+class */
425 unsigned char brd_sversion; /* version of this structure */
426 unsigned char brd_brevision; /* board revision */
427 unsigned char brd_promver; /* board prom version, if any */
428 unsigned char brd_flags; /* Enabled, Disabled etc */
429 unsigned char brd_slot; /* slot number */
430 unsigned short brd_debugsw; /* Debug switches */
431 moduleid_t brd_module; /* module to which it belongs */
432 partid_t brd_partition; /* Partition number */
433 unsigned short brd_diagval; /* diagnostic value */
434 unsigned short brd_diagparm; /* diagnostic parameter */
435 unsigned char brd_inventory; /* inventory history */
436 unsigned char brd_numcompts; /* Number of components */
437 nic_t brd_nic; /* Number in CAN */
438 nasid_t brd_nasid; /* passed parameter */
439 klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
440 klconf_off_t brd_errinfo; /* Board's error information */
441 struct lboard_s *brd_parent; /* Logical parent for this brd */
442 vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */
443 confidence_t brd_confidence; /* confidence that the board is bad */
444 nasid_t brd_owner; /* who owns this board */
445 unsigned char brd_nic_flags; /* To handle 8 more NICs */
446 char brd_name[32];
447 } lboard_t;
448
449
450 /*
451 * Make sure we pass back the calias space address for local boards.
452 * klconfig board traversal and error structure extraction defines.
453 */
454
455 #define BOARD_SLOT(_brd) ((_brd)->brd_slot)
456
457 #define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type)
458 #define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type)
459 #define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
460 #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
461 #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module)
462
463 #define KLCF_NEXT(_brd) \
464 ((_brd)->brd_next ? \
465 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
466 NULL)
467 #define KLCF_COMP(_brd, _ndx) \
468 (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \
469 (_brd)->brd_compts[(_ndx)]))
470
471 #define KLCF_COMP_ERROR(_brd, _comp) \
472 (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
473
474 #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type)
475 #define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */
476
477
478
479 /*
480 * Generic info structure. This stores common info about a
481 * component.
482 */
483
484 typedef struct klinfo_s { /* Generic info */
485 unsigned char struct_type; /* type of this structure */
486 unsigned char struct_version; /* version of this structure */
487 unsigned char flags; /* Enabled, disabled etc */
488 unsigned char revision; /* component revision */
489 unsigned short diagval; /* result of diagnostics */
490 unsigned short diagparm; /* diagnostic parameter */
491 unsigned char inventory; /* previous inventory status */
492 nic_t nic; /* MUst be aligned properly */
493 unsigned char physid; /* physical id of component */
494 unsigned int virtid; /* virtual id as seen by system */
495 unsigned char widid; /* Widget id - if applicable */
496 nasid_t nasid; /* node number - from parent */
497 char pad1; /* pad out structure. */
498 char pad2; /* pad out structure. */
499 COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/
500 klconf_off_t errinfo; /* component specific errors */
501 unsigned short pad3; /* pci fields have moved over to */
502 unsigned short pad4; /* klbri_t */
503 } klinfo_t ;
504
505 #define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE)
506 /*
507 * Component structures.
508 * Following are the currently identified components:
509 * CPU, HUB, MEM_BANK,
510 * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
511 * BRIDGE, IOC3, SuperIO, SCSI, FDDI
512 * ROUTER
513 * GRAPHICS
514 */
515 #define KLSTRUCT_UNKNOWN 0
516 #define KLSTRUCT_CPU 1
517 #define KLSTRUCT_HUB 2
518 #define KLSTRUCT_MEMBNK 3
519 #define KLSTRUCT_XBOW 4
520 #define KLSTRUCT_BRI 5
521 #define KLSTRUCT_IOC3 6
522 #define KLSTRUCT_PCI 7
523 #define KLSTRUCT_VME 8
524 #define KLSTRUCT_ROU 9
525 #define KLSTRUCT_GFX 10
526 #define KLSTRUCT_SCSI 11
527 #define KLSTRUCT_FDDI 12
528 #define KLSTRUCT_MIO 13
529 #define KLSTRUCT_DISK 14
530 #define KLSTRUCT_TAPE 15
531 #define KLSTRUCT_CDROM 16
532 #define KLSTRUCT_HUB_UART 17
533 #define KLSTRUCT_IOC3ENET 18
534 #define KLSTRUCT_IOC3UART 19
535 #define KLSTRUCT_UNUSED 20 /* XXX UNUSED */
536 #define KLSTRUCT_IOC3PCKM 21
537 #define KLSTRUCT_RAD 22
538 #define KLSTRUCT_HUB_TTY 23
539 #define KLSTRUCT_IOC3_TTY 24
540
541 /* Early Access IO proms are compatible
542 only with KLSTRUCT values up to 24. */
543
544 #define KLSTRUCT_FIBERCHANNEL 25
545 #define KLSTRUCT_MOD_SERIAL_NUM 26
546 #define KLSTRUCT_IOC3MS 27
547 #define KLSTRUCT_TPU 28
548 #define KLSTRUCT_GSN_A 29
549 #define KLSTRUCT_GSN_B 30
550 #define KLSTRUCT_XTHD 31
551
552 /*
553 * These are the indices of various components within a lboard structure.
554 */
555
556 #define IP27_CPU0_INDEX 0
557 #define IP27_CPU1_INDEX 1
558 #define IP27_HUB_INDEX 2
559 #define IP27_MEM_INDEX 3
560
561 #define BASEIO_BRIDGE_INDEX 0
562 #define BASEIO_IOC3_INDEX 1
563 #define BASEIO_SCSI1_INDEX 2
564 #define BASEIO_SCSI2_INDEX 3
565
566 #define MIDPLANE_XBOW_INDEX 0
567 #define ROUTER_COMPONENT_INDEX 0
568
569 #define CH4SCSI_BRIDGE_INDEX 0
570
571 /* Info holders for various hardware components */
572
573 typedef u64 *pci_t;
574 typedef u64 *vmeb_t;
575 typedef u64 *vmed_t;
576 typedef u64 *fddi_t;
577 typedef u64 *scsi_t;
578 typedef u64 *mio_t;
579 typedef u64 *graphics_t;
580 typedef u64 *router_t;
581
582 /*
583 * The port info in ip27_cfg area translates to a lboart_t in the
584 * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
585 * is stored in terms of a nasid and a offset from start of KLCONFIG
586 * area on that nasid.
587 */
588 typedef struct klport_s {
589 nasid_t port_nasid;
590 unsigned char port_flag;
591 klconf_off_t port_offset;
592 } klport_t;
593
594 typedef struct klcpu_s { /* CPU */
595 klinfo_t cpu_info;
596 unsigned short cpu_prid; /* Processor PRID value */
597 unsigned short cpu_fpirr; /* FPU IRR value */
598 unsigned short cpu_speed; /* Speed in MHZ */
599 unsigned short cpu_scachesz; /* secondary cache size in MB */
600 unsigned short cpu_scachespeed;/* secondary cache speed in MHz */
601 } klcpu_t ;
602
603 #define CPU_STRUCT_VERSION 2
604
605 typedef struct klhub_s { /* HUB */
606 klinfo_t hub_info;
607 unsigned int hub_flags; /* PCFG_HUB_xxx flags */
608 klport_t hub_port; /* hub is connected to this */
609 nic_t hub_box_nic; /* nic of containing box */
610 klconf_off_t hub_mfg_nic; /* MFG NIC string */
611 u64 hub_speed; /* Speed of hub in HZ */
612 } klhub_t ;
613
614 typedef struct klhub_uart_s { /* HUB */
615 klinfo_t hubuart_info;
616 unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */
617 nic_t hubuart_box_nic; /* nic of containing box */
618 } klhub_uart_t ;
619
620 #define MEMORY_STRUCT_VERSION 2
621
622 typedef struct klmembnk_s { /* MEMORY BANK */
623 klinfo_t membnk_info;
624 short membnk_memsz; /* Total memory in megabytes */
625 short membnk_dimm_select; /* bank to physical addr mapping*/
626 short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
627 short membnk_attr;
628 } klmembnk_t ;
629
630 #define KLCONFIG_MEMBNK_SIZE(_info, _bank) \
631 ((_info)->membnk_bnksz[(_bank)])
632
633
634 #define MEMBNK_PREMIUM 1
635 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \
636 ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
637
638 #define MAX_SERIAL_NUM_SIZE 10
639
640 typedef struct klmod_serial_num_s {
641 klinfo_t snum_info;
642 union {
643 char snum_str[MAX_SERIAL_NUM_SIZE];
644 unsigned long long snum_int;
645 } snum;
646 } klmod_serial_num_t;
647
648 /* Macros needed to access serial number structure in lboard_t.
649 Hard coded values are necessary since we cannot treat
650 serial number struct as a component without losing compatibility
651 between prom versions. */
652
653 #define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\
654 KLCF_COMP(_l, _l->brd_numcompts))
655
656 #define MAX_XBOW_LINKS 16
657
658 typedef struct klxbow_s { /* XBOW */
659 klinfo_t xbow_info ;
660 klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
661 int xbow_master_hub_link;
662 /* type of brd connected+component struct ptr+flags */
663 } klxbow_t ;
664
665 #define MAX_PCI_SLOTS 8
666
667 typedef struct klpci_device_s {
668 s32 pci_device_id; /* 32 bits of vendor/device ID. */
669 s32 pci_device_pad; /* 32 bits of padding. */
670 } klpci_device_t;
671
672 #define BRIDGE_STRUCT_VERSION 2
673
674 typedef struct klbri_s { /* BRIDGE */
675 klinfo_t bri_info ;
676 unsigned char bri_eprominfo ; /* IO6prom connected to bridge */
677 unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */
678 pci_t pci_specific ; /* PCI Board config info */
679 klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */
680 klconf_off_t bri_mfg_nic ;
681 } klbri_t ;
682
683 #define MAX_IOC3_TTY 2
684
685 typedef struct klioc3_s { /* IOC3 */
686 klinfo_t ioc3_info ;
687 unsigned char ioc3_ssram ; /* Info about ssram */
688 unsigned char ioc3_nvram ; /* Info about nvram */
689 klinfo_t ioc3_superio ; /* Info about superio */
690 klconf_off_t ioc3_tty_off ;
691 klinfo_t ioc3_enet ;
692 klconf_off_t ioc3_enet_off ;
693 klconf_off_t ioc3_kbd_off ;
694 } klioc3_t ;
695
696 #define MAX_VME_SLOTS 8
697
698 typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */
699 klinfo_t vmeb_info ;
700 vmeb_t vmeb_specific ;
701 klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
702 } klvmeb_t ;
703
704 typedef struct klvmed_s { /* VME DEVICE - VME BOARD */
705 klinfo_t vmed_info ;
706 vmed_t vmed_specific ;
707 klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
708 } klvmed_t ;
709
710 #define ROUTER_VECTOR_VERS 2
711
712 /* XXX - Don't we need the number of ports here?!? */
713 typedef struct klrou_s { /* ROUTER */
714 klinfo_t rou_info ;
715 unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */
716 nic_t rou_box_nic ; /* nic of the containing module */
717 klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
718 klconf_off_t rou_mfg_nic ; /* MFG NIC string */
719 u64 rou_vector; /* vector from master node */
720 } klrou_t ;
721
722 /*
723 * Graphics Controller/Device
724 *
725 * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
726 * used a couple different structures to store graphics information.
727 * For compatibility reasons, the newer data structure preserves some
728 * of the layout so that fields that are used in the old versions remain
729 * in the same place (with the same info). Determination of what version
730 * of this structure we have is done by checking the cookie field.
731 */
732 #define KLGFX_COOKIE 0x0c0de000
733
734 typedef struct klgfx_s { /* GRAPHICS Device */
735 klinfo_t gfx_info;
736 klconf_off_t old_gndevs; /* for compatibility with older proms */
737 klconf_off_t old_gdoff0; /* for compatibility with older proms */
738 unsigned int cookie; /* for compatibility with older proms */
739 unsigned int moduleslot;
740 struct klgfx_s *gfx_next_pipe;
741 graphics_t gfx_specific;
742 klconf_off_t pad0; /* for compatibility with older proms */
743 klconf_off_t gfx_mfg_nic;
744 } klgfx_t;
745
746 typedef struct klxthd_s {
747 klinfo_t xthd_info ;
748 klconf_off_t xthd_mfg_nic ; /* MFG NIC string */
749 } klxthd_t ;
750
751 typedef struct kltpu_s { /* TPU board */
752 klinfo_t tpu_info ;
753 klconf_off_t tpu_mfg_nic ; /* MFG NIC string */
754 } kltpu_t ;
755
756 typedef struct klgsn_s { /* GSN board */
757 klinfo_t gsn_info ;
758 klconf_off_t gsn_mfg_nic ; /* MFG NIC string */
759 } klgsn_t ;
760
761 #define MAX_SCSI_DEVS 16
762
763 /*
764 * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
765 * to allocate space of type COMPONENT. Make sure that if the size of
766 * any other component struct becomes more than this, then redefine
767 * that as the size to be klmalloced.
768 */
769
770 typedef struct klscsi_s { /* SCSI Controller */
771 klinfo_t scsi_info ;
772 scsi_t scsi_specific ;
773 unsigned char scsi_numdevs ;
774 klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ;
775 } klscsi_t ;
776
777 typedef struct klscdev_s { /* SCSI device */
778 klinfo_t scdev_info ;
779 struct scsidisk_data *scdev_cfg ; /* driver fills up this */
780 } klscdev_t ;
781
782 typedef struct klttydev_s { /* TTY device */
783 klinfo_t ttydev_info ;
784 struct terminal_data *ttydev_cfg ; /* driver fills up this */
785 } klttydev_t ;
786
787 typedef struct klenetdev_s { /* ENET device */
788 klinfo_t enetdev_info ;
789 struct net_data *enetdev_cfg ; /* driver fills up this */
790 } klenetdev_t ;
791
792 typedef struct klkbddev_s { /* KBD device */
793 klinfo_t kbddev_info ;
794 struct keyboard_data *kbddev_cfg ; /* driver fills up this */
795 } klkbddev_t ;
796
797 typedef struct klmsdev_s { /* mouse device */
798 klinfo_t msdev_info ;
799 void *msdev_cfg ;
800 } klmsdev_t ;
801
802 #define MAX_FDDI_DEVS 10 /* XXX Is this true */
803
804 typedef struct klfddi_s { /* FDDI */
805 klinfo_t fddi_info ;
806 fddi_t fddi_specific ;
807 klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ;
808 } klfddi_t ;
809
810 typedef struct klmio_s { /* MIO */
811 klinfo_t mio_info ;
812 mio_t mio_specific ;
813 } klmio_t ;
814
815
816 typedef union klcomp_s {
817 klcpu_t kc_cpu;
818 klhub_t kc_hub;
819 klmembnk_t kc_mem;
820 klxbow_t kc_xbow;
821 klbri_t kc_bri;
822 klioc3_t kc_ioc3;
823 klvmeb_t kc_vmeb;
824 klvmed_t kc_vmed;
825 klrou_t kc_rou;
826 klgfx_t kc_gfx;
827 klscsi_t kc_scsi;
828 klscdev_t kc_scsi_dev;
829 klfddi_t kc_fddi;
830 klmio_t kc_mio;
831 klmod_serial_num_t kc_snum ;
832 } klcomp_t;
833
834 typedef union kldev_s { /* for device structure allocation */
835 klscdev_t kc_scsi_dev ;
836 klttydev_t kc_tty_dev ;
837 klenetdev_t kc_enet_dev ;
838 klkbddev_t kc_kbd_dev ;
839 } kldev_t ;
840
841 /* Data structure interface routines. TBD */
842
843 /* Include launch info in this file itself? TBD */
844
845 /*
846 * TBD - Can the ARCS and device driver related info also be included in the
847 * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
848 * structure, viz private to the IO4prom.
849 */
850
851 /*
852 * TBD - Allocation issues.
853 *
854 * Do we need to Mark off separate heaps for lboard_t, rboard_t, component,
855 * errinfo and allocate from them, or have a single heap and allocate all
856 * structures from it. Debug is easier in the former method since we can
857 * dump all similar structs in one command, but there will be lots of holes,
858 * in memory and max limits are needed for number of structures.
859 * Another way to make it organized, is to have a union of all components
860 * and allocate a aligned chunk of memory greater than the biggest
861 * component.
862 */
863
864 typedef union {
865 lboard_t *lbinfo ;
866 } biptr_t ;
867
868
869 #define BRI_PER_XBOW 6
870 #define PCI_PER_BRI 8
871 #define DEV_PER_PCI 16
872
873
874 /* Virtual dipswitch values (starting from switch "7"): */
875
876 #define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */
877 #define VDS_NOMP 0x100 /* Don't start slave processors */
878 #define VDS_MANUMODE 0x80 /* Manufacturing mode */
879 #define VDS_NOARB 0x40 /* No bootmaster arbitration */
880 #define VDS_PODMODE 0x20 /* Go straight to POD mode */
881 #define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */
882 #define VDS_DEFAULTS 0x08 /* Use default environment values */
883 #define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */
884 #define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */
885 #define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */
886
887 /* external declarations of Linux kernel functions. */
888
889 extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
890 extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
891 extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
892 extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
893
894 #endif /* _ASM_SN_KLCONFIG_H */
895
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.