1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2014 Imagination Technologies
4 * Author: Paul Burton <paul.burton@mips.com>
5 */
6
7 #include <linux/cpuhotplug.h>
8 #include <linux/init.h>
9 #include <linux/percpu.h>
10 #include <linux/slab.h>
11 #include <linux/suspend.h>
12
13 #include <asm/asm-offsets.h>
14 #include <asm/cacheflush.h>
15 #include <asm/cacheops.h>
16 #include <asm/idle.h>
17 #include <asm/mips-cps.h>
18 #include <asm/mipsmtregs.h>
19 #include <asm/pm.h>
20 #include <asm/pm-cps.h>
21 #include <asm/regdef.h>
22 #include <asm/smp-cps.h>
23 #include <asm/uasm.h>
24
25 /*
26 * cps_nc_entry_fn - type of a generated non-coherent state entry function
27 * @online: the count of online coupled VPEs
28 * @nc_ready_count: pointer to a non-coherent mapping of the core ready_count
29 *
30 * The code entering & exiting non-coherent states is generated at runtime
31 * using uasm, in order to ensure that the compiler cannot insert a stray
32 * memory access at an unfortunate time and to allow the generation of optimal
33 * core-specific code particularly for cache routines. If coupled_coherence
34 * is non-zero and this is the entry function for the CPS_PM_NC_WAIT state,
35 * returns the number of VPEs that were in the wait state at the point this
36 * VPE left it. Returns garbage if coupled_coherence is zero or this is not
37 * the entry function for CPS_PM_NC_WAIT.
38 */
39 typedef unsigned (*cps_nc_entry_fn)(unsigned online, u32 *nc_ready_count);
40
41 /*
42 * The entry point of the generated non-coherent idle state entry/exit
43 * functions. Actually per-core rather than per-CPU.
44 */
45 static DEFINE_PER_CPU_READ_MOSTLY(cps_nc_entry_fn[CPS_PM_STATE_COUNT],
46 nc_asm_enter);
47
48 /* Bitmap indicating which states are supported by the system */
49 static DECLARE_BITMAP(state_support, CPS_PM_STATE_COUNT);
50
51 /*
52 * Indicates the number of coupled VPEs ready to operate in a non-coherent
53 * state. Actually per-core rather than per-CPU.
54 */
55 static DEFINE_PER_CPU_ALIGNED(u32*, ready_count);
56
57 /* Indicates online CPUs coupled with the current CPU */
58 static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled);
59
60 /*
61 * Used to synchronize entry to deep idle states. Actually per-core rather
62 * than per-CPU.
63 */
64 static DEFINE_PER_CPU_ALIGNED(atomic_t, pm_barrier);
65
66 /* Saved CPU state across the CPS_PM_POWER_GATED state */
67 DEFINE_PER_CPU_ALIGNED(struct mips_static_suspend_state, cps_cpu_state);
68
69 /* A somewhat arbitrary number of labels & relocs for uasm */
70 static struct uasm_label labels[32];
71 static struct uasm_reloc relocs[32];
72
73 bool cps_pm_support_state(enum cps_pm_state state)
74 {
75 return test_bit(state, state_support);
76 }
77
78 static void coupled_barrier(atomic_t *a, unsigned online)
79 {
80 /*
81 * This function is effectively the same as
82 * cpuidle_coupled_parallel_barrier, which can't be used here since
83 * there's no cpuidle device.
84 */
85
86 if (!coupled_coherence)
87 return;
88
89 smp_mb__before_atomic();
90 atomic_inc(a);
91
92 while (atomic_read(a) < online)
93 cpu_relax();
94
95 if (atomic_inc_return(a) == online * 2) {
96 atomic_set(a, 0);
97 return;
98 }
99
100 while (atomic_read(a) > online)
101 cpu_relax();
102 }
103
104 int cps_pm_enter_state(enum cps_pm_state state)
105 {
106 unsigned cpu = smp_processor_id();
107 unsigned core = cpu_core(¤t_cpu_data);
108 unsigned online, left;
109 cpumask_t *coupled_mask = this_cpu_ptr(&online_coupled);
110 u32 *core_ready_count, *nc_core_ready_count;
111 void *nc_addr;
112 cps_nc_entry_fn entry;
113 struct core_boot_config *core_cfg;
114 struct vpe_boot_config *vpe_cfg;
115
116 /* Check that there is an entry function for this state */
117 entry = per_cpu(nc_asm_enter, core)[state];
118 if (!entry)
119 return -EINVAL;
120
121 /* Calculate which coupled CPUs (VPEs) are online */
122 #if defined(CONFIG_MIPS_MT) || defined(CONFIG_CPU_MIPSR6)
123 if (cpu_online(cpu)) {
124 cpumask_and(coupled_mask, cpu_online_mask,
125 &cpu_sibling_map[cpu]);
126 online = cpumask_weight(coupled_mask);
127 cpumask_clear_cpu(cpu, coupled_mask);
128 } else
129 #endif
130 {
131 cpumask_clear(coupled_mask);
132 online = 1;
133 }
134
135 /* Setup the VPE to run mips_cps_pm_restore when started again */
136 if (IS_ENABLED(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
137 /* Power gating relies upon CPS SMP */
138 if (!mips_cps_smp_in_use())
139 return -EINVAL;
140
141 core_cfg = &mips_cps_core_bootcfg[core];
142 vpe_cfg = &core_cfg->vpe_config[cpu_vpe_id(¤t_cpu_data)];
143 vpe_cfg->pc = (unsigned long)mips_cps_pm_restore;
144 vpe_cfg->gp = (unsigned long)current_thread_info();
145 vpe_cfg->sp = 0;
146 }
147
148 /* Indicate that this CPU might not be coherent */
149 cpumask_clear_cpu(cpu, &cpu_coherent_mask);
150 smp_mb__after_atomic();
151
152 /* Create a non-coherent mapping of the core ready_count */
153 core_ready_count = per_cpu(ready_count, core);
154 nc_addr = kmap_noncoherent(virt_to_page(core_ready_count),
155 (unsigned long)core_ready_count);
156 nc_addr += ((unsigned long)core_ready_count & ~PAGE_MASK);
157 nc_core_ready_count = nc_addr;
158
159 /* Ensure ready_count is zero-initialised before the assembly runs */
160 WRITE_ONCE(*nc_core_ready_count, 0);
161 coupled_barrier(&per_cpu(pm_barrier, core), online);
162
163 /* Run the generated entry code */
164 left = entry(online, nc_core_ready_count);
165
166 /* Remove the non-coherent mapping of ready_count */
167 kunmap_noncoherent();
168
169 /* Indicate that this CPU is definitely coherent */
170 cpumask_set_cpu(cpu, &cpu_coherent_mask);
171
172 /*
173 * If this VPE is the first to leave the non-coherent wait state then
174 * it needs to wake up any coupled VPEs still running their wait
175 * instruction so that they return to cpuidle, which can then complete
176 * coordination between the coupled VPEs & provide the governor with
177 * a chance to reflect on the length of time the VPEs were in the
178 * idle state.
179 */
180 if (coupled_coherence && (state == CPS_PM_NC_WAIT) && (left == online))
181 arch_send_call_function_ipi_mask(coupled_mask);
182
183 return 0;
184 }
185
186 static void cps_gen_cache_routine(u32 **pp, struct uasm_label **pl,
187 struct uasm_reloc **pr,
188 const struct cache_desc *cache,
189 unsigned op, int lbl)
190 {
191 unsigned cache_size = cache->ways << cache->waybit;
192 unsigned i;
193 const unsigned unroll_lines = 32;
194
195 /* If the cache isn't present this function has it easy */
196 if (cache->flags & MIPS_CACHE_NOT_PRESENT)
197 return;
198
199 /* Load base address */
200 UASM_i_LA(pp, GPR_T0, (long)CKSEG0);
201
202 /* Calculate end address */
203 if (cache_size < 0x8000)
204 uasm_i_addiu(pp, GPR_T1, GPR_T0, cache_size);
205 else
206 UASM_i_LA(pp, GPR_T1, (long)(CKSEG0 + cache_size));
207
208 /* Start of cache op loop */
209 uasm_build_label(pl, *pp, lbl);
210
211 /* Generate the cache ops */
212 for (i = 0; i < unroll_lines; i++) {
213 if (cpu_has_mips_r6) {
214 uasm_i_cache(pp, op, 0, GPR_T0);
215 uasm_i_addiu(pp, GPR_T0, GPR_T0, cache->linesz);
216 } else {
217 uasm_i_cache(pp, op, i * cache->linesz, GPR_T0);
218 }
219 }
220
221 if (!cpu_has_mips_r6)
222 /* Update the base address */
223 uasm_i_addiu(pp, GPR_T0, GPR_T0, unroll_lines * cache->linesz);
224
225 /* Loop if we haven't reached the end address yet */
226 uasm_il_bne(pp, pr, GPR_T0, GPR_T1, lbl);
227 uasm_i_nop(pp);
228 }
229
230 static int cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl,
231 struct uasm_reloc **pr,
232 const struct cpuinfo_mips *cpu_info,
233 int lbl)
234 {
235 unsigned i, fsb_size = 8;
236 unsigned num_loads = (fsb_size * 3) / 2;
237 unsigned line_stride = 2;
238 unsigned line_size = cpu_info->dcache.linesz;
239 unsigned perf_counter, perf_event;
240 unsigned revision = cpu_info->processor_id & PRID_REV_MASK;
241
242 /*
243 * Determine whether this CPU requires an FSB flush, and if so which
244 * performance counter/event reflect stalls due to a full FSB.
245 */
246 switch (__get_cpu_type(cpu_info->cputype)) {
247 case CPU_INTERAPTIV:
248 perf_counter = 1;
249 perf_event = 51;
250 break;
251
252 case CPU_PROAPTIV:
253 /* Newer proAptiv cores don't require this workaround */
254 if (revision >= PRID_REV_ENCODE_332(1, 1, 0))
255 return 0;
256
257 /* On older ones it's unavailable */
258 return -1;
259
260 default:
261 /* Assume that the CPU does not need this workaround */
262 return 0;
263 }
264
265 /*
266 * Ensure that the fill/store buffer (FSB) is not holding the results
267 * of a prefetch, since if it is then the CPC sequencer may become
268 * stuck in the D3 (ClrBus) state whilst entering a low power state.
269 */
270
271 /* Preserve perf counter setup */
272 uasm_i_mfc0(pp, GPR_T2, 25, (perf_counter * 2) + 0); /* PerfCtlN */
273 uasm_i_mfc0(pp, GPR_T3, 25, (perf_counter * 2) + 1); /* PerfCntN */
274
275 /* Setup perf counter to count FSB full pipeline stalls */
276 uasm_i_addiu(pp, GPR_T0, GPR_ZERO, (perf_event << 5) | 0xf);
277 uasm_i_mtc0(pp, GPR_T0, 25, (perf_counter * 2) + 0); /* PerfCtlN */
278 uasm_i_ehb(pp);
279 uasm_i_mtc0(pp, GPR_ZERO, 25, (perf_counter * 2) + 1); /* PerfCntN */
280 uasm_i_ehb(pp);
281
282 /* Base address for loads */
283 UASM_i_LA(pp, GPR_T0, (long)CKSEG0);
284
285 /* Start of clear loop */
286 uasm_build_label(pl, *pp, lbl);
287
288 /* Perform some loads to fill the FSB */
289 for (i = 0; i < num_loads; i++)
290 uasm_i_lw(pp, GPR_ZERO, i * line_size * line_stride, GPR_T0);
291
292 /*
293 * Invalidate the new D-cache entries so that the cache will need
294 * refilling (via the FSB) if the loop is executed again.
295 */
296 for (i = 0; i < num_loads; i++) {
297 uasm_i_cache(pp, Hit_Invalidate_D,
298 i * line_size * line_stride, GPR_T0);
299 uasm_i_cache(pp, Hit_Writeback_Inv_SD,
300 i * line_size * line_stride, GPR_T0);
301 }
302
303 /* Barrier ensuring previous cache invalidates are complete */
304 uasm_i_sync(pp, __SYNC_full);
305 uasm_i_ehb(pp);
306
307 /* Check whether the pipeline stalled due to the FSB being full */
308 uasm_i_mfc0(pp, GPR_T1, 25, (perf_counter * 2) + 1); /* PerfCntN */
309
310 /* Loop if it didn't */
311 uasm_il_beqz(pp, pr, GPR_T1, lbl);
312 uasm_i_nop(pp);
313
314 /* Restore perf counter 1. The count may well now be wrong... */
315 uasm_i_mtc0(pp, GPR_T2, 25, (perf_counter * 2) + 0); /* PerfCtlN */
316 uasm_i_ehb(pp);
317 uasm_i_mtc0(pp, GPR_T3, 25, (perf_counter * 2) + 1); /* PerfCntN */
318 uasm_i_ehb(pp);
319
320 return 0;
321 }
322
323 static void cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl,
324 struct uasm_reloc **pr,
325 unsigned r_addr, int lbl)
326 {
327 uasm_i_lui(pp, GPR_T0, uasm_rel_hi(0x80000000));
328 uasm_build_label(pl, *pp, lbl);
329 uasm_i_ll(pp, GPR_T1, 0, r_addr);
330 uasm_i_or(pp, GPR_T1, GPR_T1, GPR_T0);
331 uasm_i_sc(pp, GPR_T1, 0, r_addr);
332 uasm_il_beqz(pp, pr, GPR_T1, lbl);
333 uasm_i_nop(pp);
334 }
335
336 static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
337 {
338 struct uasm_label *l = labels;
339 struct uasm_reloc *r = relocs;
340 u32 *buf, *p;
341 const unsigned r_online = GPR_A0;
342 const unsigned r_nc_count = GPR_A1;
343 const unsigned r_pcohctl = GPR_T8;
344 const unsigned max_instrs = 256;
345 unsigned cpc_cmd;
346 int err;
347 enum {
348 lbl_incready = 1,
349 lbl_poll_cont,
350 lbl_secondary_hang,
351 lbl_disable_coherence,
352 lbl_flush_fsb,
353 lbl_invicache,
354 lbl_flushdcache,
355 lbl_hang,
356 lbl_set_cont,
357 lbl_secondary_cont,
358 lbl_decready,
359 };
360
361 /* Allocate a buffer to hold the generated code */
362 p = buf = kcalloc(max_instrs, sizeof(u32), GFP_KERNEL);
363 if (!buf)
364 return NULL;
365
366 /* Clear labels & relocs ready for (re)use */
367 memset(labels, 0, sizeof(labels));
368 memset(relocs, 0, sizeof(relocs));
369
370 if (IS_ENABLED(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
371 /* Power gating relies upon CPS SMP */
372 if (!mips_cps_smp_in_use())
373 goto out_err;
374
375 /*
376 * Save CPU state. Note the non-standard calling convention
377 * with the return address placed in v0 to avoid clobbering
378 * the ra register before it is saved.
379 */
380 UASM_i_LA(&p, GPR_T0, (long)mips_cps_pm_save);
381 uasm_i_jalr(&p, GPR_V0, GPR_T0);
382 uasm_i_nop(&p);
383 }
384
385 /*
386 * Load addresses of required CM & CPC registers. This is done early
387 * because they're needed in both the enable & disable coherence steps
388 * but in the coupled case the enable step will only run on one VPE.
389 */
390 UASM_i_LA(&p, r_pcohctl, (long)addr_gcr_cl_coherence());
391
392 if (coupled_coherence) {
393 /* Increment ready_count */
394 uasm_i_sync(&p, __SYNC_mb);
395 uasm_build_label(&l, p, lbl_incready);
396 uasm_i_ll(&p, GPR_T1, 0, r_nc_count);
397 uasm_i_addiu(&p, GPR_T2, GPR_T1, 1);
398 uasm_i_sc(&p, GPR_T2, 0, r_nc_count);
399 uasm_il_beqz(&p, &r, GPR_T2, lbl_incready);
400 uasm_i_addiu(&p, GPR_T1, GPR_T1, 1);
401
402 /* Barrier ensuring all CPUs see the updated r_nc_count value */
403 uasm_i_sync(&p, __SYNC_mb);
404
405 /*
406 * If this is the last VPE to become ready for non-coherence
407 * then it should branch below.
408 */
409 uasm_il_beq(&p, &r, GPR_T1, r_online, lbl_disable_coherence);
410 uasm_i_nop(&p);
411
412 if (state < CPS_PM_POWER_GATED) {
413 /*
414 * Otherwise this is not the last VPE to become ready
415 * for non-coherence. It needs to wait until coherence
416 * has been disabled before proceeding, which it will do
417 * by polling for the top bit of ready_count being set.
418 */
419 uasm_i_addiu(&p, GPR_T1, GPR_ZERO, -1);
420 uasm_build_label(&l, p, lbl_poll_cont);
421 uasm_i_lw(&p, GPR_T0, 0, r_nc_count);
422 uasm_il_bltz(&p, &r, GPR_T0, lbl_secondary_cont);
423 uasm_i_ehb(&p);
424 if (cpu_has_mipsmt)
425 uasm_i_yield(&p, GPR_ZERO, GPR_T1);
426 uasm_il_b(&p, &r, lbl_poll_cont);
427 uasm_i_nop(&p);
428 } else {
429 /*
430 * The core will lose power & this VPE will not continue
431 * so it can simply halt here.
432 */
433 if (cpu_has_mipsmt) {
434 /* Halt the VPE via C0 tchalt register */
435 uasm_i_addiu(&p, GPR_T0, GPR_ZERO, TCHALT_H);
436 uasm_i_mtc0(&p, GPR_T0, 2, 4);
437 } else if (cpu_has_vp) {
438 /* Halt the VP via the CPC VP_STOP register */
439 unsigned int vpe_id;
440
441 vpe_id = cpu_vpe_id(&cpu_data[cpu]);
442 uasm_i_addiu(&p, GPR_T0, GPR_ZERO, 1 << vpe_id);
443 UASM_i_LA(&p, GPR_T1, (long)addr_cpc_cl_vp_stop());
444 uasm_i_sw(&p, GPR_T0, 0, GPR_T1);
445 } else {
446 BUG();
447 }
448 uasm_build_label(&l, p, lbl_secondary_hang);
449 uasm_il_b(&p, &r, lbl_secondary_hang);
450 uasm_i_nop(&p);
451 }
452 }
453
454 /*
455 * This is the point of no return - this VPE will now proceed to
456 * disable coherence. At this point we *must* be sure that no other
457 * VPE within the core will interfere with the L1 dcache.
458 */
459 uasm_build_label(&l, p, lbl_disable_coherence);
460
461 /* Invalidate the L1 icache */
462 cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].icache,
463 Index_Invalidate_I, lbl_invicache);
464
465 /* Writeback & invalidate the L1 dcache */
466 cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].dcache,
467 Index_Writeback_Inv_D, lbl_flushdcache);
468
469 /* Barrier ensuring previous cache invalidates are complete */
470 uasm_i_sync(&p, __SYNC_full);
471 uasm_i_ehb(&p);
472
473 if (mips_cm_revision() < CM_REV_CM3) {
474 /*
475 * Disable all but self interventions. The load from COHCTL is
476 * defined by the interAptiv & proAptiv SUMs as ensuring that the
477 * operation resulting from the preceding store is complete.
478 */
479 uasm_i_addiu(&p, GPR_T0, GPR_ZERO, 1 << cpu_core(&cpu_data[cpu]));
480 uasm_i_sw(&p, GPR_T0, 0, r_pcohctl);
481 uasm_i_lw(&p, GPR_T0, 0, r_pcohctl);
482
483 /* Barrier to ensure write to coherence control is complete */
484 uasm_i_sync(&p, __SYNC_full);
485 uasm_i_ehb(&p);
486 }
487
488 /* Disable coherence */
489 uasm_i_sw(&p, GPR_ZERO, 0, r_pcohctl);
490 uasm_i_lw(&p, GPR_T0, 0, r_pcohctl);
491
492 if (state >= CPS_PM_CLOCK_GATED) {
493 err = cps_gen_flush_fsb(&p, &l, &r, &cpu_data[cpu],
494 lbl_flush_fsb);
495 if (err)
496 goto out_err;
497
498 /* Determine the CPC command to issue */
499 switch (state) {
500 case CPS_PM_CLOCK_GATED:
501 cpc_cmd = CPC_Cx_CMD_CLOCKOFF;
502 break;
503 case CPS_PM_POWER_GATED:
504 cpc_cmd = CPC_Cx_CMD_PWRDOWN;
505 break;
506 default:
507 BUG();
508 goto out_err;
509 }
510
511 /* Issue the CPC command */
512 UASM_i_LA(&p, GPR_T0, (long)addr_cpc_cl_cmd());
513 uasm_i_addiu(&p, GPR_T1, GPR_ZERO, cpc_cmd);
514 uasm_i_sw(&p, GPR_T1, 0, GPR_T0);
515
516 if (state == CPS_PM_POWER_GATED) {
517 /* If anything goes wrong just hang */
518 uasm_build_label(&l, p, lbl_hang);
519 uasm_il_b(&p, &r, lbl_hang);
520 uasm_i_nop(&p);
521
522 /*
523 * There's no point generating more code, the core is
524 * powered down & if powered back up will run from the
525 * reset vector not from here.
526 */
527 goto gen_done;
528 }
529
530 /* Barrier to ensure write to CPC command is complete */
531 uasm_i_sync(&p, __SYNC_full);
532 uasm_i_ehb(&p);
533 }
534
535 if (state == CPS_PM_NC_WAIT) {
536 /*
537 * At this point it is safe for all VPEs to proceed with
538 * execution. This VPE will set the top bit of ready_count
539 * to indicate to the other VPEs that they may continue.
540 */
541 if (coupled_coherence)
542 cps_gen_set_top_bit(&p, &l, &r, r_nc_count,
543 lbl_set_cont);
544
545 /*
546 * VPEs which did not disable coherence will continue
547 * executing, after coherence has been disabled, from this
548 * point.
549 */
550 uasm_build_label(&l, p, lbl_secondary_cont);
551
552 /* Now perform our wait */
553 uasm_i_wait(&p, 0);
554 }
555
556 /*
557 * Re-enable coherence. Note that for CPS_PM_NC_WAIT all coupled VPEs
558 * will run this. The first will actually re-enable coherence & the
559 * rest will just be performing a rather unusual nop.
560 */
561 uasm_i_addiu(&p, GPR_T0, GPR_ZERO, mips_cm_revision() < CM_REV_CM3
562 ? CM_GCR_Cx_COHERENCE_COHDOMAINEN
563 : CM3_GCR_Cx_COHERENCE_COHEN);
564
565 uasm_i_sw(&p, GPR_T0, 0, r_pcohctl);
566 uasm_i_lw(&p, GPR_T0, 0, r_pcohctl);
567
568 /* Barrier to ensure write to coherence control is complete */
569 uasm_i_sync(&p, __SYNC_full);
570 uasm_i_ehb(&p);
571
572 if (coupled_coherence && (state == CPS_PM_NC_WAIT)) {
573 /* Decrement ready_count */
574 uasm_build_label(&l, p, lbl_decready);
575 uasm_i_sync(&p, __SYNC_mb);
576 uasm_i_ll(&p, GPR_T1, 0, r_nc_count);
577 uasm_i_addiu(&p, GPR_T2, GPR_T1, -1);
578 uasm_i_sc(&p, GPR_T2, 0, r_nc_count);
579 uasm_il_beqz(&p, &r, GPR_T2, lbl_decready);
580 uasm_i_andi(&p, GPR_V0, GPR_T1, (1 << fls(smp_num_siblings)) - 1);
581
582 /* Barrier ensuring all CPUs see the updated r_nc_count value */
583 uasm_i_sync(&p, __SYNC_mb);
584 }
585
586 if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) {
587 /*
588 * At this point it is safe for all VPEs to proceed with
589 * execution. This VPE will set the top bit of ready_count
590 * to indicate to the other VPEs that they may continue.
591 */
592 cps_gen_set_top_bit(&p, &l, &r, r_nc_count, lbl_set_cont);
593
594 /*
595 * This core will be reliant upon another core sending a
596 * power-up command to the CPC in order to resume operation.
597 * Thus an arbitrary VPE can't trigger the core leaving the
598 * idle state and the one that disables coherence might as well
599 * be the one to re-enable it. The rest will continue from here
600 * after that has been done.
601 */
602 uasm_build_label(&l, p, lbl_secondary_cont);
603
604 /* Barrier ensuring all CPUs see the updated r_nc_count value */
605 uasm_i_sync(&p, __SYNC_mb);
606 }
607
608 /* The core is coherent, time to return to C code */
609 uasm_i_jr(&p, GPR_RA);
610 uasm_i_nop(&p);
611
612 gen_done:
613 /* Ensure the code didn't exceed the resources allocated for it */
614 BUG_ON((p - buf) > max_instrs);
615 BUG_ON((l - labels) > ARRAY_SIZE(labels));
616 BUG_ON((r - relocs) > ARRAY_SIZE(relocs));
617
618 /* Patch branch offsets */
619 uasm_resolve_relocs(relocs, labels);
620
621 /* Flush the icache */
622 local_flush_icache_range((unsigned long)buf, (unsigned long)p);
623
624 return buf;
625 out_err:
626 kfree(buf);
627 return NULL;
628 }
629
630 static int cps_pm_online_cpu(unsigned int cpu)
631 {
632 enum cps_pm_state state;
633 unsigned core = cpu_core(&cpu_data[cpu]);
634 void *entry_fn, *core_rc;
635
636 for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) {
637 if (per_cpu(nc_asm_enter, core)[state])
638 continue;
639 if (!test_bit(state, state_support))
640 continue;
641
642 entry_fn = cps_gen_entry_code(cpu, state);
643 if (!entry_fn) {
644 pr_err("Failed to generate core %u state %u entry\n",
645 core, state);
646 clear_bit(state, state_support);
647 }
648
649 per_cpu(nc_asm_enter, core)[state] = entry_fn;
650 }
651
652 if (!per_cpu(ready_count, core)) {
653 core_rc = kmalloc(sizeof(u32), GFP_KERNEL);
654 if (!core_rc) {
655 pr_err("Failed allocate core %u ready_count\n", core);
656 return -ENOMEM;
657 }
658 per_cpu(ready_count, core) = core_rc;
659 }
660
661 return 0;
662 }
663
664 static int cps_pm_power_notifier(struct notifier_block *this,
665 unsigned long event, void *ptr)
666 {
667 unsigned int stat;
668
669 switch (event) {
670 case PM_SUSPEND_PREPARE:
671 stat = read_cpc_cl_stat_conf();
672 /*
673 * If we're attempting to suspend the system and power down all
674 * of the cores, the JTAG detect bit indicates that the CPC will
675 * instead put the cores into clock-off state. In this state
676 * a connected debugger can cause the CPU to attempt
677 * interactions with the powered down system. At best this will
678 * fail. At worst, it can hang the NoC, requiring a hard reset.
679 * To avoid this, just block system suspend if a JTAG probe
680 * is detected.
681 */
682 if (stat & CPC_Cx_STAT_CONF_EJTAG_PROBE) {
683 pr_warn("JTAG probe is connected - abort suspend\n");
684 return NOTIFY_BAD;
685 }
686 return NOTIFY_DONE;
687 default:
688 return NOTIFY_DONE;
689 }
690 }
691
692 static int __init cps_pm_init(void)
693 {
694 /* A CM is required for all non-coherent states */
695 if (!mips_cm_present()) {
696 pr_warn("pm-cps: no CM, non-coherent states unavailable\n");
697 return 0;
698 }
699
700 /*
701 * If interrupts were enabled whilst running a wait instruction on a
702 * non-coherent core then the VPE may end up processing interrupts
703 * whilst non-coherent. That would be bad.
704 */
705 if (cpu_wait == r4k_wait_irqoff)
706 set_bit(CPS_PM_NC_WAIT, state_support);
707 else
708 pr_warn("pm-cps: non-coherent wait unavailable\n");
709
710 /* Detect whether a CPC is present */
711 if (mips_cpc_present()) {
712 /* Detect whether clock gating is implemented */
713 if (read_cpc_cl_stat_conf() & CPC_Cx_STAT_CONF_CLKGAT_IMPL)
714 set_bit(CPS_PM_CLOCK_GATED, state_support);
715 else
716 pr_warn("pm-cps: CPC does not support clock gating\n");
717
718 /* Power gating is available with CPS SMP & any CPC */
719 if (mips_cps_smp_in_use())
720 set_bit(CPS_PM_POWER_GATED, state_support);
721 else
722 pr_warn("pm-cps: CPS SMP not in use, power gating unavailable\n");
723 } else {
724 pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");
725 }
726
727 pm_notifier(cps_pm_power_notifier, 0);
728
729 return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mips/cps_pm:online",
730 cps_pm_online_cpu, NULL);
731 }
732 arch_initcall(cps_pm_init);
733
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.