1 /*
2 * RM200 specific code
3 *
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
7 *
8 * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
9 *
10 * i8259 parts ripped out of arch/mips/kernel/i8259.c
11 */
12
13 #include <linux/delay.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/irq.h>
17 #include <linux/platform_device.h>
18 #include <linux/serial_8250.h>
19 #include <linux/io.h>
20
21 #include <asm/sni.h>
22 #include <asm/time.h>
23 #include <asm/irq_cpu.h>
24
25 #define RM200_I8259A_IRQ_BASE 32
26
27 #define MEMPORT(_base,_irq) \
28 { \
29 .mapbase = _base, \
30 .irq = _irq, \
31 .uartclk = 1843200, \
32 .iotype = UPIO_MEM, \
33 .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP, \
34 }
35
36 static struct plat_serial8250_port rm200_data[] = {
37 MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4),
38 MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3),
39 { },
40 };
41
42 static struct platform_device rm200_serial8250_device = {
43 .name = "serial8250",
44 .id = PLAT8250_DEV_PLATFORM,
45 .dev = {
46 .platform_data = rm200_data,
47 },
48 };
49
50 static struct resource rm200_ds1216_rsrc[] = {
51 {
52 .start = 0x1cd41ffc,
53 .end = 0x1cd41fff,
54 .flags = IORESOURCE_MEM
55 }
56 };
57
58 static struct platform_device rm200_ds1216_device = {
59 .name = "rtc-ds1216",
60 .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc),
61 .resource = rm200_ds1216_rsrc
62 };
63
64 static struct resource snirm_82596_rm200_rsrc[] = {
65 {
66 .start = 0x18000000,
67 .end = 0x180fffff,
68 .flags = IORESOURCE_MEM
69 },
70 {
71 .start = 0x1b000000,
72 .end = 0x1b000004,
73 .flags = IORESOURCE_MEM
74 },
75 {
76 .start = 0x1ff00000,
77 .end = 0x1ff00020,
78 .flags = IORESOURCE_MEM
79 },
80 {
81 .start = 27,
82 .end = 27,
83 .flags = IORESOURCE_IRQ
84 },
85 {
86 .flags = 0x00
87 }
88 };
89
90 static struct platform_device snirm_82596_rm200_pdev = {
91 .name = "snirm_82596",
92 .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc),
93 .resource = snirm_82596_rm200_rsrc
94 };
95
96 static struct resource snirm_53c710_rm200_rsrc[] = {
97 {
98 .start = 0x19000000,
99 .end = 0x190fffff,
100 .flags = IORESOURCE_MEM
101 },
102 {
103 .start = 26,
104 .end = 26,
105 .flags = IORESOURCE_IRQ
106 }
107 };
108
109 static struct platform_device snirm_53c710_rm200_pdev = {
110 .name = "snirm_53c710",
111 .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
112 .resource = snirm_53c710_rm200_rsrc
113 };
114
115 static int __init snirm_setup_devinit(void)
116 {
117 if (sni_brd_type == SNI_BRD_RM200) {
118 platform_device_register(&rm200_serial8250_device);
119 platform_device_register(&rm200_ds1216_device);
120 platform_device_register(&snirm_82596_rm200_pdev);
121 platform_device_register(&snirm_53c710_rm200_pdev);
122 sni_eisa_root_init();
123 }
124 return 0;
125 }
126
127 device_initcall(snirm_setup_devinit);
128
129 /*
130 * RM200 has an ISA and an EISA bus. The iSA bus is only used
131 * for onboard devices and also has twi i8259 PICs. Since these
132 * PICs are no accessible via inb/outb the following code uses
133 * readb/writeb to access them
134 */
135
136 static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock);
137 #define PIC_CMD 0x00
138 #define PIC_IMR 0x01
139 #define PIC_ISR PIC_CMD
140 #define PIC_POLL PIC_ISR
141 #define PIC_OCW3 PIC_ISR
142
143 /* i8259A PIC related value */
144 #define PIC_CASCADE_IR 2
145 #define MASTER_ICW4_DEFAULT 0x01
146 #define SLAVE_ICW4_DEFAULT 0x01
147
148 /*
149 * This contains the irq mask for both 8259A irq controllers,
150 */
151 static unsigned int rm200_cached_irq_mask = 0xffff;
152 static __iomem u8 *rm200_pic_master;
153 static __iomem u8 *rm200_pic_slave;
154
155 #define cached_master_mask (rm200_cached_irq_mask)
156 #define cached_slave_mask (rm200_cached_irq_mask >> 8)
157
158 static void sni_rm200_disable_8259A_irq(struct irq_data *d)
159 {
160 unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE;
161 unsigned long flags;
162
163 mask = 1 << irq;
164 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
165 rm200_cached_irq_mask |= mask;
166 if (irq & 8)
167 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
168 else
169 writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
170 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
171 }
172
173 static void sni_rm200_enable_8259A_irq(struct irq_data *d)
174 {
175 unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE;
176 unsigned long flags;
177
178 mask = ~(1 << irq);
179 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
180 rm200_cached_irq_mask &= mask;
181 if (irq & 8)
182 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
183 else
184 writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
185 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
186 }
187
188 static inline int sni_rm200_i8259A_irq_real(unsigned int irq)
189 {
190 int value;
191 int irqmask = 1 << irq;
192
193 if (irq < 8) {
194 writeb(0x0B, rm200_pic_master + PIC_CMD);
195 value = readb(rm200_pic_master + PIC_CMD) & irqmask;
196 writeb(0x0A, rm200_pic_master + PIC_CMD);
197 return value;
198 }
199 writeb(0x0B, rm200_pic_slave + PIC_CMD); /* ISR register */
200 value = readb(rm200_pic_slave + PIC_CMD) & (irqmask >> 8);
201 writeb(0x0A, rm200_pic_slave + PIC_CMD);
202 return value;
203 }
204
205 /*
206 * Careful! The 8259A is a fragile beast, it pretty
207 * much _has_ to be done exactly like this (mask it
208 * first, _then_ send the EOI, and the order of EOI
209 * to the two 8259s is important!
210 */
211 void sni_rm200_mask_and_ack_8259A(struct irq_data *d)
212 {
213 unsigned int irqmask, irq = d->irq - RM200_I8259A_IRQ_BASE;
214 unsigned long flags;
215
216 irqmask = 1 << irq;
217 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
218 /*
219 * Lightweight spurious IRQ detection. We do not want
220 * to overdo spurious IRQ handling - it's usually a sign
221 * of hardware problems, so we only do the checks we can
222 * do without slowing down good hardware unnecessarily.
223 *
224 * Note that IRQ7 and IRQ15 (the two spurious IRQs
225 * usually resulting from the 8259A-1|2 PICs) occur
226 * even if the IRQ is masked in the 8259A. Thus we
227 * can check spurious 8259A IRQs without doing the
228 * quite slow i8259A_irq_real() call for every IRQ.
229 * This does not cover 100% of spurious interrupts,
230 * but should be enough to warn the user that there
231 * is something bad going on ...
232 */
233 if (rm200_cached_irq_mask & irqmask)
234 goto spurious_8259A_irq;
235 rm200_cached_irq_mask |= irqmask;
236
237 handle_real_irq:
238 if (irq & 8) {
239 readb(rm200_pic_slave + PIC_IMR);
240 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
241 writeb(0x60+(irq & 7), rm200_pic_slave + PIC_CMD);
242 writeb(0x60+PIC_CASCADE_IR, rm200_pic_master + PIC_CMD);
243 } else {
244 readb(rm200_pic_master + PIC_IMR);
245 writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
246 writeb(0x60+irq, rm200_pic_master + PIC_CMD);
247 }
248 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
249 return;
250
251 spurious_8259A_irq:
252 /*
253 * this is the slow path - should happen rarely.
254 */
255 if (sni_rm200_i8259A_irq_real(irq))
256 /*
257 * oops, the IRQ _is_ in service according to the
258 * 8259A - not spurious, go handle it.
259 */
260 goto handle_real_irq;
261
262 {
263 static int spurious_irq_mask;
264 /*
265 * At this point we can be sure the IRQ is spurious,
266 * let's ACK and report it. [once per IRQ]
267 */
268 if (!(spurious_irq_mask & irqmask)) {
269 printk(KERN_DEBUG
270 "spurious RM200 8259A interrupt: IRQ%d.\n", irq);
271 spurious_irq_mask |= irqmask;
272 }
273 atomic_inc(&irq_err_count);
274 /*
275 * Theoretically we do not have to handle this IRQ,
276 * but in Linux this does not cause problems and is
277 * simpler for us.
278 */
279 goto handle_real_irq;
280 }
281 }
282
283 static struct irq_chip sni_rm200_i8259A_chip = {
284 .name = "RM200-XT-PIC",
285 .irq_mask = sni_rm200_disable_8259A_irq,
286 .irq_unmask = sni_rm200_enable_8259A_irq,
287 .irq_mask_ack = sni_rm200_mask_and_ack_8259A,
288 };
289
290 /*
291 * Do the traditional i8259 interrupt polling thing. This is for the few
292 * cases where no better interrupt acknowledge method is available and we
293 * absolutely must touch the i8259.
294 */
295 static inline int sni_rm200_i8259_irq(void)
296 {
297 int irq;
298
299 raw_spin_lock(&sni_rm200_i8259A_lock);
300
301 /* Perform an interrupt acknowledge cycle on controller 1. */
302 writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */
303 irq = readb(rm200_pic_master + PIC_CMD) & 7;
304 if (irq == PIC_CASCADE_IR) {
305 /*
306 * Interrupt is cascaded so perform interrupt
307 * acknowledge on controller 2.
308 */
309 writeb(0x0C, rm200_pic_slave + PIC_CMD); /* prepare for poll */
310 irq = (readb(rm200_pic_slave + PIC_CMD) & 7) + 8;
311 }
312
313 if (unlikely(irq == 7)) {
314 /*
315 * This may be a spurious interrupt.
316 *
317 * Read the interrupt status register (ISR). If the most
318 * significant bit is not set then there is no valid
319 * interrupt.
320 */
321 writeb(0x0B, rm200_pic_master + PIC_ISR); /* ISR register */
322 if (~readb(rm200_pic_master + PIC_ISR) & 0x80)
323 irq = -1;
324 }
325
326 raw_spin_unlock(&sni_rm200_i8259A_lock);
327
328 return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq;
329 }
330
331 void sni_rm200_init_8259A(void)
332 {
333 unsigned long flags;
334
335 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
336
337 writeb(0xff, rm200_pic_master + PIC_IMR);
338 writeb(0xff, rm200_pic_slave + PIC_IMR);
339
340 writeb(0x11, rm200_pic_master + PIC_CMD);
341 writeb(0, rm200_pic_master + PIC_IMR);
342 writeb(1U << PIC_CASCADE_IR, rm200_pic_master + PIC_IMR);
343 writeb(MASTER_ICW4_DEFAULT, rm200_pic_master + PIC_IMR);
344 writeb(0x11, rm200_pic_slave + PIC_CMD);
345 writeb(8, rm200_pic_slave + PIC_IMR);
346 writeb(PIC_CASCADE_IR, rm200_pic_slave + PIC_IMR);
347 writeb(SLAVE_ICW4_DEFAULT, rm200_pic_slave + PIC_IMR);
348 udelay(100); /* wait for 8259A to initialize */
349
350 writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
351 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
352
353 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
354 }
355
356 /*
357 * IRQ2 is cascade interrupt to second interrupt controller
358 */
359
360 static struct resource sni_rm200_pic1_resource = {
361 .name = "onboard ISA pic1",
362 .start = 0x16000020,
363 .end = 0x16000023,
364 .flags = IORESOURCE_BUSY
365 };
366
367 static struct resource sni_rm200_pic2_resource = {
368 .name = "onboard ISA pic2",
369 .start = 0x160000a0,
370 .end = 0x160000a3,
371 .flags = IORESOURCE_BUSY
372 };
373
374 /* ISA irq handler */
375 static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p)
376 {
377 int irq;
378
379 irq = sni_rm200_i8259_irq();
380 if (unlikely(irq < 0))
381 return IRQ_NONE;
382
383 do_IRQ(irq);
384 return IRQ_HANDLED;
385 }
386
387 void __init sni_rm200_i8259_irqs(void)
388 {
389 int i;
390
391 rm200_pic_master = ioremap(0x16000020, 4);
392 if (!rm200_pic_master)
393 return;
394 rm200_pic_slave = ioremap(0x160000a0, 4);
395 if (!rm200_pic_slave) {
396 iounmap(rm200_pic_master);
397 return;
398 }
399
400 insert_resource(&iomem_resource, &sni_rm200_pic1_resource);
401 insert_resource(&iomem_resource, &sni_rm200_pic2_resource);
402
403 sni_rm200_init_8259A();
404
405 for (i = RM200_I8259A_IRQ_BASE; i < RM200_I8259A_IRQ_BASE + 16; i++)
406 irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip,
407 handle_level_irq);
408
409 if (request_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, no_action,
410 IRQF_NO_THREAD, "cascade", NULL))
411 pr_err("Failed to register cascade interrupt\n");
412 }
413
414
415 #define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000)
416 #define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000)
417
418 #define SNI_RM200_INT_START 24
419 #define SNI_RM200_INT_END 28
420
421 static void enable_rm200_irq(struct irq_data *d)
422 {
423 unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START);
424
425 *(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask;
426 }
427
428 void disable_rm200_irq(struct irq_data *d)
429 {
430 unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START);
431
432 *(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask;
433 }
434
435 static struct irq_chip rm200_irq_type = {
436 .name = "RM200",
437 .irq_mask = disable_rm200_irq,
438 .irq_unmask = enable_rm200_irq,
439 };
440
441 static void sni_rm200_hwint(void)
442 {
443 u32 pending = read_c0_cause() & read_c0_status();
444 u8 mask;
445 u8 stat;
446 int irq;
447
448 if (pending & C_IRQ5)
449 do_IRQ(MIPS_CPU_IRQ_BASE + 7);
450 else if (pending & C_IRQ0) {
451 clear_c0_status(IE_IRQ0);
452 mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f;
453 stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14;
454 irq = ffs(stat & mask & 0x1f);
455
456 if (likely(irq > 0))
457 do_IRQ(irq + SNI_RM200_INT_START - 1);
458 set_c0_status(IE_IRQ0);
459 }
460 }
461
462 void __init sni_rm200_irq_init(void)
463 {
464 int i;
465
466 * (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f;
467
468 sni_rm200_i8259_irqs();
469 mips_cpu_irq_init();
470 /* Actually we've got more interrupts to handle ... */
471 for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
472 irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
473 sni_hwint = sni_rm200_hwint;
474 change_c0_status(ST0_IM, IE_IRQ0);
475 if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
476 0, "onboard ISA", NULL))
477 pr_err("Failed to register onboard ISA interrupt\n");
478 if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler, 0, "ISA",
479 NULL))
480 pr_err("Failed to register ISA interrupt\n");
481 }
482
483 void __init sni_rm200_init(void)
484 {
485 }
486
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.