1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Contains register definitions common to PowerPC 8xx CPUs. Notice 4 */ 5 #ifndef _ASM_POWERPC_REG_8xx_H 6 #define _ASM_POWERPC_REG_8xx_H 7 8 /* Cache control on the MPC8xx is provided through some additional 9 * special purpose registers. 10 */ 11 #define SPRN_IC_CST 560 /* Instruction cache control/status */ 12 #define SPRN_IC_ADR 561 /* Address needed for some commands */ 13 #define SPRN_IC_DAT 562 /* Read-only data register */ 14 #define SPRN_DC_CST 568 /* Data cache control/status */ 15 #define SPRN_DC_ADR 569 /* Address needed for some commands */ 16 #define SPRN_DC_DAT 570 /* Read-only data register */ 17 18 /* Misc Debug */ 19 #define SPRN_DPDR 630 20 #define SPRN_MI_CAM 816 21 #define SPRN_MI_RAM0 817 22 #define SPRN_MI_RAM1 818 23 #define SPRN_MD_CAM 824 24 #define SPRN_MD_RAM0 825 25 #define SPRN_MD_RAM1 826 26 27 /* Special MSR manipulation registers */ 28 #define SPRN_EIE 80 /* External interrupt enable (EE=1, RI=1) */ 29 #define SPRN_EID 81 /* External interrupt disable (EE=0, RI=1) */ 30 #define SPRN_NRI 82 /* Non recoverable interrupt (EE=0, RI=0) */ 31 32 /* Debug registers */ 33 #define SPRN_CMPA 144 34 #define SPRN_COUNTA 150 35 #define SPRN_CMPE 152 36 #define SPRN_CMPF 153 37 #define SPRN_LCTRL1 156 38 #define LCTRL1_CTE_GT 0xc0000000 39 #define LCTRL1_CTF_LT 0x14000000 40 #define LCTRL1_CRWE_RW 0x00000000 41 #define LCTRL1_CRWE_RO 0x00040000 42 #define LCTRL1_CRWE_WO 0x000c0000 43 #define LCTRL1_CRWF_RW 0x00000000 44 #define LCTRL1_CRWF_RO 0x00010000 45 #define LCTRL1_CRWF_WO 0x00030000 46 #define SPRN_LCTRL2 157 47 #define LCTRL2_LW0EN 0x80000000 48 #define LCTRL2_LW0LA_E 0x00000000 49 #define LCTRL2_LW0LA_F 0x04000000 50 #define LCTRL2_LW0LA_EandF 0x08000000 51 #define LCTRL2_LW0LADC 0x02000000 52 #define LCTRL2_SLW0EN 0x00000002 53 #ifdef CONFIG_PPC_8xx 54 #define SPRN_ICTRL 158 55 #endif 56 #define SPRN_BAR 159 57 58 /* Commands. Only the first few are available to the instruction cache. 59 */ 60 #define IDC_ENABLE 0x02000000 /* Cache enable */ 61 #define IDC_DISABLE 0x04000000 /* Cache disable */ 62 #define IDC_LDLCK 0x06000000 /* Load and lock */ 63 #define IDC_UNLINE 0x08000000 /* Unlock line */ 64 #define IDC_UNALL 0x0a000000 /* Unlock all */ 65 #define IDC_INVALL 0x0c000000 /* Invalidate all */ 66 67 #define DC_FLINE 0x0e000000 /* Flush data cache line */ 68 #define DC_SFWT 0x01000000 /* Set forced writethrough mode */ 69 #define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ 70 #define DC_SLES 0x05000000 /* Set little endian swap mode */ 71 #define DC_CLES 0x07000000 /* Clear little endian swap mode */ 72 73 /* Status. 74 */ 75 #define IDC_ENABLED 0x80000000 /* Cache is enabled */ 76 #define IDC_CERR1 0x00200000 /* Cache error 1 */ 77 #define IDC_CERR2 0x00100000 /* Cache error 2 */ 78 #define IDC_CERR3 0x00080000 /* Cache error 3 */ 79 80 #define DC_DFWT 0x40000000 /* Data cache is forced write through */ 81 #define DC_LES 0x20000000 /* Caches are little endian mode */ 82 83 #endif /* _ASM_POWERPC_REG_8xx_H */ 84
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.