1 /*
2 * Platform setup for the Freescale mpc885ads board
3 *
4 * Vitaly Bordug <vbordug@ru.mvista.com>
5 *
6 * Copyright 2005 MontaVista Software Inc.
7 *
8 * Heavily modified by Scott Wood <scottwood@freescale.com>
9 * Copyright 2007 Freescale Semiconductor, Inc.
10 *
11 * This file is licensed under the terms of the GNU General Public License
12 * version 2. This program is licensed "as is" without any warranty of any
13 * kind, whether express or implied.
14 */
15
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/param.h>
19 #include <linux/string.h>
20 #include <linux/ioport.h>
21 #include <linux/device.h>
22 #include <linux/delay.h>
23
24 #include <linux/fsl_devices.h>
25 #include <linux/mii.h>
26 #include <linux/of_address.h>
27 #include <linux/of_fdt.h>
28 #include <linux/of_platform.h>
29
30 #include <asm/delay.h>
31 #include <asm/io.h>
32 #include <asm/machdep.h>
33 #include <asm/page.h>
34 #include <asm/processor.h>
35 #include <asm/time.h>
36 #include <asm/8xx_immap.h>
37 #include <asm/cpm1.h>
38 #include <asm/udbg.h>
39
40 #include "mpc885ads.h"
41 #include "mpc8xx.h"
42 #include "pic.h"
43
44 static u32 __iomem *bcsr, *bcsr5;
45
46 struct cpm_pin {
47 int port, pin, flags;
48 };
49
50 static struct cpm_pin mpc885ads_pins[] = {
51 /* SMC1 */
52 {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
53 {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
54
55 /* SMC2 */
56 #ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
57 {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
58 {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
59 #endif
60
61 /* SCC3 */
62 {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
63 {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
64 {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
65 {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
66 {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
67 {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
68 {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
69
70 /* MII1 */
71 {CPM_PORTA, 0, CPM_PIN_INPUT},
72 {CPM_PORTA, 1, CPM_PIN_INPUT},
73 {CPM_PORTA, 2, CPM_PIN_INPUT},
74 {CPM_PORTA, 3, CPM_PIN_INPUT},
75 {CPM_PORTA, 4, CPM_PIN_OUTPUT},
76 {CPM_PORTA, 10, CPM_PIN_OUTPUT},
77 {CPM_PORTA, 11, CPM_PIN_OUTPUT},
78 {CPM_PORTB, 19, CPM_PIN_INPUT},
79 {CPM_PORTB, 31, CPM_PIN_INPUT},
80 {CPM_PORTC, 12, CPM_PIN_INPUT},
81 {CPM_PORTC, 13, CPM_PIN_INPUT},
82 {CPM_PORTE, 30, CPM_PIN_OUTPUT},
83 {CPM_PORTE, 31, CPM_PIN_OUTPUT},
84
85 /* MII2 */
86 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
87 {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
88 {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
89 {CPM_PORTE, 16, CPM_PIN_OUTPUT},
90 {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
91 {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
92 {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
93 {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
94 {CPM_PORTE, 21, CPM_PIN_OUTPUT},
95 {CPM_PORTE, 22, CPM_PIN_OUTPUT},
96 {CPM_PORTE, 23, CPM_PIN_OUTPUT},
97 {CPM_PORTE, 24, CPM_PIN_OUTPUT},
98 {CPM_PORTE, 25, CPM_PIN_OUTPUT},
99 {CPM_PORTE, 26, CPM_PIN_OUTPUT},
100 {CPM_PORTE, 27, CPM_PIN_OUTPUT},
101 {CPM_PORTE, 28, CPM_PIN_OUTPUT},
102 {CPM_PORTE, 29, CPM_PIN_OUTPUT},
103 #endif
104 /* I2C */
105 {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
106 {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
107 };
108
109 static void __init init_ioports(void)
110 {
111 int i;
112
113 for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
114 struct cpm_pin *pin = &mpc885ads_pins[i];
115 cpm1_set_pin(pin->port, pin->pin, pin->flags);
116 }
117
118 cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
119 cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
120 cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
121 cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
122
123 /* Set FEC1 and FEC2 to MII mode */
124 clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
125 }
126
127 static void __init mpc885ads_setup_arch(void)
128 {
129 struct device_node *np;
130
131 cpm_reset();
132 init_ioports();
133
134 np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
135 if (!np) {
136 printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
137 return;
138 }
139
140 bcsr = of_iomap(np, 0);
141 bcsr5 = of_iomap(np, 1);
142 of_node_put(np);
143
144 if (!bcsr || !bcsr5) {
145 printk(KERN_CRIT "Could not remap BCSR\n");
146 return;
147 }
148
149 clrbits32(&bcsr[1], BCSR1_RS232EN_1);
150 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
151 setbits32(&bcsr[1], BCSR1_RS232EN_2);
152 #else
153 clrbits32(&bcsr[1], BCSR1_RS232EN_2);
154 #endif
155
156 clrbits32(bcsr5, BCSR5_MII1_EN);
157 setbits32(bcsr5, BCSR5_MII1_RST);
158 udelay(1000);
159 clrbits32(bcsr5, BCSR5_MII1_RST);
160
161 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
162 clrbits32(bcsr5, BCSR5_MII2_EN);
163 setbits32(bcsr5, BCSR5_MII2_RST);
164 udelay(1000);
165 clrbits32(bcsr5, BCSR5_MII2_RST);
166 #else
167 setbits32(bcsr5, BCSR5_MII2_EN);
168 #endif
169
170 #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
171 clrbits32(&bcsr[4], BCSR4_ETH10_RST);
172 udelay(1000);
173 setbits32(&bcsr[4], BCSR4_ETH10_RST);
174
175 setbits32(&bcsr[1], BCSR1_ETHEN);
176
177 np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
178 #else
179 np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
180 #endif
181
182 /* The SCC3 enet registers overlap the SMC1 registers, so
183 * one of the two must be removed from the device tree.
184 */
185
186 if (np) {
187 of_detach_node(np);
188 of_node_put(np);
189 }
190 }
191
192 static const struct of_device_id of_bus_ids[] __initconst = {
193 { .name = "soc", },
194 { .name = "cpm", },
195 { .name = "localbus", },
196 {},
197 };
198
199 static int __init declare_of_platform_devices(void)
200 {
201 /* Publish the QE devices */
202 of_platform_bus_probe(NULL, of_bus_ids, NULL);
203
204 return 0;
205 }
206 machine_device_initcall(mpc885_ads, declare_of_platform_devices);
207
208 define_machine(mpc885_ads) {
209 .name = "Freescale MPC885 ADS",
210 .compatible = "fsl,mpc885ads",
211 .setup_arch = mpc885ads_setup_arch,
212 .init_IRQ = mpc8xx_pic_init,
213 .get_irq = mpc8xx_get_irq,
214 .restart = mpc8xx_restart,
215 .calibrate_decr = mpc8xx_calibrate_decr,
216 .progress = udbg_progress,
217 };
218
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.