1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Renesas Technology Corp. R0P7785LC0011RL Support.
4 *
5 * Copyright (C) 2008 Yoshihiro Shimoda
6 * Copyright (C) 2009 Paul Mundt
7 */
8 #include <linux/init.h>
9 #include <linux/platform_device.h>
10 #include <linux/sm501.h>
11 #include <linux/sm501-regs.h>
12 #include <linux/fb.h>
13 #include <linux/mtd/physmap.h>
14 #include <linux/delay.h>
15 #include <linux/interrupt.h>
16 #include <linux/i2c.h>
17 #include <linux/platform_data/i2c-pca-platform.h>
18 #include <linux/i2c-algo-pca.h>
19 #include <linux/usb/r8a66597.h>
20 #include <linux/sh_intc.h>
21 #include <linux/irq.h>
22 #include <linux/io.h>
23 #include <linux/clk.h>
24 #include <linux/errno.h>
25 #include <linux/gpio/machine.h>
26 #include <mach/sh7785lcr.h>
27 #include <cpu/sh7785.h>
28 #include <asm/heartbeat.h>
29 #include <asm/clock.h>
30 #include <asm/bl_bit.h>
31
32 /*
33 * NOTE: This board has 2 physical memory maps.
34 * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
35 */
36 static struct resource heartbeat_resource = {
37 .start = PLD_LEDCR,
38 .end = PLD_LEDCR,
39 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
40 };
41
42 static struct platform_device heartbeat_device = {
43 .name = "heartbeat",
44 .id = -1,
45 .num_resources = 1,
46 .resource = &heartbeat_resource,
47 };
48
49 static struct mtd_partition nor_flash_partitions[] = {
50 {
51 .name = "loader",
52 .offset = 0x00000000,
53 .size = 512 * 1024,
54 },
55 {
56 .name = "bootenv",
57 .offset = MTDPART_OFS_APPEND,
58 .size = 512 * 1024,
59 },
60 {
61 .name = "kernel",
62 .offset = MTDPART_OFS_APPEND,
63 .size = 4 * 1024 * 1024,
64 },
65 {
66 .name = "data",
67 .offset = MTDPART_OFS_APPEND,
68 .size = MTDPART_SIZ_FULL,
69 },
70 };
71
72 static struct physmap_flash_data nor_flash_data = {
73 .width = 4,
74 .parts = nor_flash_partitions,
75 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
76 };
77
78 static struct resource nor_flash_resources[] = {
79 [0] = {
80 .start = NOR_FLASH_ADDR,
81 .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
82 .flags = IORESOURCE_MEM,
83 }
84 };
85
86 static struct platform_device nor_flash_device = {
87 .name = "physmap-flash",
88 .dev = {
89 .platform_data = &nor_flash_data,
90 },
91 .num_resources = ARRAY_SIZE(nor_flash_resources),
92 .resource = nor_flash_resources,
93 };
94
95 static struct r8a66597_platdata r8a66597_data = {
96 .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
97 .vif = 1,
98 };
99
100 static struct resource r8a66597_usb_host_resources[] = {
101 [0] = {
102 .start = R8A66597_ADDR,
103 .end = R8A66597_ADDR + R8A66597_SIZE - 1,
104 .flags = IORESOURCE_MEM,
105 },
106 [1] = {
107 .start = evt2irq(0x240),
108 .end = evt2irq(0x240),
109 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
110 },
111 };
112
113 static struct platform_device r8a66597_usb_host_device = {
114 .name = "r8a66597_hcd",
115 .id = -1,
116 .dev = {
117 .dma_mask = NULL,
118 .coherent_dma_mask = 0xffffffff,
119 .platform_data = &r8a66597_data,
120 },
121 .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
122 .resource = r8a66597_usb_host_resources,
123 };
124
125 static struct resource sm501_resources[] = {
126 [0] = {
127 .start = SM107_MEM_ADDR,
128 .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
129 .flags = IORESOURCE_MEM,
130 },
131 [1] = {
132 .start = SM107_REG_ADDR,
133 .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
134 .flags = IORESOURCE_MEM,
135 },
136 [2] = {
137 .start = evt2irq(0x340),
138 .flags = IORESOURCE_IRQ,
139 },
140 };
141
142 static struct fb_videomode sm501_default_mode_crt = {
143 .pixclock = 35714, /* 28MHz */
144 .xres = 640,
145 .yres = 480,
146 .left_margin = 105,
147 .right_margin = 16,
148 .upper_margin = 33,
149 .lower_margin = 10,
150 .hsync_len = 39,
151 .vsync_len = 2,
152 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
153 };
154
155 static struct fb_videomode sm501_default_mode_pnl = {
156 .pixclock = 40000, /* 25MHz */
157 .xres = 640,
158 .yres = 480,
159 .left_margin = 2,
160 .right_margin = 16,
161 .upper_margin = 33,
162 .lower_margin = 10,
163 .hsync_len = 39,
164 .vsync_len = 2,
165 .sync = 0,
166 };
167
168 static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
169 .def_bpp = 16,
170 .def_mode = &sm501_default_mode_pnl,
171 .flags = SM501FB_FLAG_USE_INIT_MODE |
172 SM501FB_FLAG_USE_HWCURSOR |
173 SM501FB_FLAG_USE_HWACCEL |
174 SM501FB_FLAG_DISABLE_AT_EXIT |
175 SM501FB_FLAG_PANEL_NO_VBIASEN,
176 };
177
178 static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
179 .def_bpp = 16,
180 .def_mode = &sm501_default_mode_crt,
181 .flags = SM501FB_FLAG_USE_INIT_MODE |
182 SM501FB_FLAG_USE_HWCURSOR |
183 SM501FB_FLAG_USE_HWACCEL |
184 SM501FB_FLAG_DISABLE_AT_EXIT,
185 };
186
187 static struct sm501_platdata_fb sm501_fb_pdata = {
188 .fb_route = SM501_FB_OWN,
189 .fb_crt = &sm501_pdata_fbsub_crt,
190 .fb_pnl = &sm501_pdata_fbsub_pnl,
191 };
192
193 static struct sm501_initdata sm501_initdata = {
194 .gpio_high = {
195 .set = 0x00001fe0,
196 .mask = 0x0,
197 },
198 .devices = 0,
199 .mclk = 84 * 1000000,
200 .m1xclk = 112 * 1000000,
201 };
202
203 static struct sm501_platdata sm501_platform_data = {
204 .init = &sm501_initdata,
205 .fb = &sm501_fb_pdata,
206 };
207
208 static struct platform_device sm501_device = {
209 .name = "sm501",
210 .id = -1,
211 .dev = {
212 .platform_data = &sm501_platform_data,
213 },
214 .num_resources = ARRAY_SIZE(sm501_resources),
215 .resource = sm501_resources,
216 };
217
218 static struct resource i2c_proto_resources[] = {
219 [0] = {
220 .start = PCA9564_PROTO_32BIT_ADDR,
221 .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
222 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
223 },
224 [1] = {
225 .start = evt2irq(0x380),
226 .end = evt2irq(0x380),
227 .flags = IORESOURCE_IRQ,
228 },
229 };
230
231 static struct resource i2c_resources[] = {
232 [0] = {
233 .start = PCA9564_ADDR,
234 .end = PCA9564_ADDR + PCA9564_SIZE - 1,
235 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
236 },
237 [1] = {
238 .start = evt2irq(0x380),
239 .end = evt2irq(0x380),
240 .flags = IORESOURCE_IRQ,
241 },
242 };
243
244 static struct gpiod_lookup_table i2c_gpio_table = {
245 .dev_id = "i2c.0",
246 .table = {
247 GPIO_LOOKUP("pfc-sh7757", 0, "reset-gpios", GPIO_ACTIVE_LOW),
248 { },
249 },
250 };
251
252 static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
253 .i2c_clock_speed = I2C_PCA_CON_330kHz,
254 .timeout = HZ,
255 };
256
257 static struct platform_device i2c_device = {
258 .name = "i2c-pca-platform",
259 .id = -1,
260 .dev = {
261 .platform_data = &i2c_platform_data,
262 },
263 .num_resources = ARRAY_SIZE(i2c_resources),
264 .resource = i2c_resources,
265 };
266
267 static struct platform_device *sh7785lcr_devices[] __initdata = {
268 &heartbeat_device,
269 &nor_flash_device,
270 &r8a66597_usb_host_device,
271 &sm501_device,
272 &i2c_device,
273 };
274
275 static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
276 {
277 I2C_BOARD_INFO("r2025sd", 0x32),
278 },
279 };
280
281 static int __init sh7785lcr_devices_setup(void)
282 {
283 i2c_register_board_info(0, sh7785lcr_i2c_devices,
284 ARRAY_SIZE(sh7785lcr_i2c_devices));
285
286 if (mach_is_sh7785lcr_pt()) {
287 i2c_device.resource = i2c_proto_resources;
288 i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
289 }
290
291 gpiod_add_lookup_table(&i2c_gpio_table);
292 return platform_add_devices(sh7785lcr_devices,
293 ARRAY_SIZE(sh7785lcr_devices));
294 }
295 device_initcall(sh7785lcr_devices_setup);
296
297 /* Initialize IRQ setting */
298 static void __init init_sh7785lcr_IRQ(void)
299 {
300 plat_irq_setup_pins(IRQ_MODE_IRQ7654);
301 plat_irq_setup_pins(IRQ_MODE_IRQ3210);
302 }
303
304 static int sh7785lcr_clk_init(void)
305 {
306 struct clk *clk;
307 int ret;
308
309 clk = clk_get(NULL, "extal");
310 if (IS_ERR(clk))
311 return PTR_ERR(clk);
312 ret = clk_set_rate(clk, 33333333);
313 clk_put(clk);
314
315 return ret;
316 }
317
318 static void sh7785lcr_power_off(void)
319 {
320 unsigned char *p;
321
322 p = ioremap(PLD_POFCR, PLD_POFCR + 1);
323 if (!p) {
324 printk(KERN_ERR "%s: ioremap error.\n", __func__);
325 return;
326 }
327 *p = 0x01;
328 iounmap(p);
329 set_bl_bit();
330 while (1)
331 cpu_relax();
332 }
333
334 /* Initialize the board */
335 static void __init sh7785lcr_setup(char **cmdline_p)
336 {
337 void __iomem *sm501_reg;
338
339 printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
340
341 pm_power_off = sh7785lcr_power_off;
342
343 /* sm501 DRAM configuration */
344 sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL);
345 if (!sm501_reg) {
346 printk(KERN_ERR "%s: ioremap error.\n", __func__);
347 return;
348 }
349
350 writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
351 iounmap(sm501_reg);
352 }
353
354 /* Return the board specific boot mode pin configuration */
355 static int sh7785lcr_mode_pins(void)
356 {
357 int value = 0;
358
359 /* These are the factory default settings of S1 and S2.
360 * If you change these dip switches then you will need to
361 * adjust the values below as well.
362 */
363 value |= MODE_PIN4; /* Clock Mode 16 */
364 value |= MODE_PIN5; /* 32-bit Area0 bus width */
365 value |= MODE_PIN6; /* 32-bit Area0 bus width */
366 value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
367 value |= MODE_PIN8; /* Little Endian */
368 value |= MODE_PIN9; /* Master Mode */
369 value |= MODE_PIN14; /* No PLL step-up */
370
371 return value;
372 }
373
374 /*
375 * The Machine Vector
376 */
377 static struct sh_machine_vector mv_sh7785lcr __initmv = {
378 .mv_name = "SH7785LCR",
379 .mv_setup = sh7785lcr_setup,
380 .mv_clk_init = sh7785lcr_clk_init,
381 .mv_init_irq = init_sh7785lcr_IRQ,
382 .mv_mode_pins = sh7785lcr_mode_pins,
383 };
384
385
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.