1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 *
4 * arch/xtensa/platform/xtavnet/setup.c
5 *
6 * ...
7 *
8 * Authors: Chris Zankel <chris@zankel.net>
9 * Joe Taylor <joe@tensilica.com>
10 *
11 * Copyright 2001 - 2006 Tensilica Inc.
12 */
13 #include <linux/stddef.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/errno.h>
18 #include <linux/reboot.h>
19 #include <linux/kdev_t.h>
20 #include <linux/types.h>
21 #include <linux/major.h>
22 #include <linux/console.h>
23 #include <linux/delay.h>
24 #include <linux/of.h>
25 #include <linux/clk-provider.h>
26 #include <linux/of_address.h>
27 #include <linux/slab.h>
28
29 #include <asm/timex.h>
30 #include <asm/processor.h>
31 #include <asm/platform.h>
32 #include <asm/bootparam.h>
33 #include <platform/lcd.h>
34 #include <platform/hardware.h>
35
36 static int xtfpga_power_off(struct sys_off_data *unused)
37 {
38 lcd_disp_at_pos("POWEROFF", 0);
39 local_irq_disable();
40 while (1)
41 cpu_relax();
42 return NOTIFY_DONE;
43 }
44
45 static int xtfpga_restart(struct notifier_block *this,
46 unsigned long event, void *ptr)
47 {
48 /* Try software reset first. */
49 WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead);
50
51 /* If software reset did not work, flush and reset the mmu,
52 * simulate a processor reset, and jump to the reset vector.
53 */
54 cpu_reset();
55
56 return NOTIFY_DONE;
57 }
58
59 static struct notifier_block xtfpga_restart_block = {
60 .notifier_call = xtfpga_restart,
61 };
62
63 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
64
65 void __init platform_calibrate_ccount(void)
66 {
67 ccount_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
68 }
69
70 #endif
71
72 static void __init xtfpga_register_handlers(void)
73 {
74 register_restart_handler(&xtfpga_restart_block);
75 register_sys_off_handler(SYS_OFF_MODE_POWER_OFF,
76 SYS_OFF_PRIO_DEFAULT,
77 xtfpga_power_off, NULL);
78 }
79
80 #ifdef CONFIG_USE_OF
81
82 static void __init xtfpga_clk_setup(struct device_node *np)
83 {
84 void __iomem *base = of_iomap(np, 0);
85 struct clk *clk;
86 u32 freq;
87
88 if (!base) {
89 pr_err("%pOFn: invalid address\n", np);
90 return;
91 }
92
93 freq = __raw_readl(base);
94 iounmap(base);
95 clk = clk_register_fixed_rate(NULL, np->name, NULL, 0, freq);
96
97 if (IS_ERR(clk)) {
98 pr_err("%pOFn: clk registration failed\n", np);
99 return;
100 }
101
102 if (of_clk_add_provider(np, of_clk_src_simple_get, clk)) {
103 pr_err("%pOFn: clk provider registration failed\n", np);
104 return;
105 }
106 }
107 CLK_OF_DECLARE(xtfpga_clk, "cdns,xtfpga-clock", xtfpga_clk_setup);
108
109 #define MAC_LEN 6
110 static void __init update_local_mac(struct device_node *node)
111 {
112 struct property *newmac;
113 const u8* macaddr;
114 int prop_len;
115
116 macaddr = of_get_property(node, "local-mac-address", &prop_len);
117 if (macaddr == NULL || prop_len != MAC_LEN)
118 return;
119
120 newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL);
121 if (newmac == NULL)
122 return;
123
124 newmac->value = newmac + 1;
125 newmac->length = MAC_LEN;
126 newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
127 if (newmac->name == NULL) {
128 kfree(newmac);
129 return;
130 }
131
132 memcpy(newmac->value, macaddr, MAC_LEN);
133 ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f;
134 of_update_property(node, newmac);
135 }
136
137 static int __init machine_setup(void)
138 {
139 struct device_node *eth = NULL;
140
141 if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
142 update_local_mac(eth);
143 of_node_put(eth);
144
145 xtfpga_register_handlers();
146
147 return 0;
148 }
149 arch_initcall(machine_setup);
150
151 #else
152
153 #include <linux/serial_8250.h>
154 #include <linux/if.h>
155 #include <net/ethoc.h>
156 #include <linux/usb/c67x00.h>
157
158 /*----------------------------------------------------------------------------
159 * Ethernet -- OpenCores Ethernet MAC (ethoc driver)
160 */
161
162 static struct resource ethoc_res[] = {
163 [0] = { /* register space */
164 .start = OETH_REGS_PADDR,
165 .end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
166 .flags = IORESOURCE_MEM,
167 },
168 [1] = { /* buffer space */
169 .start = OETH_SRAMBUFF_PADDR,
170 .end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1,
171 .flags = IORESOURCE_MEM,
172 },
173 [2] = { /* IRQ number */
174 .start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ),
175 .end = XTENSA_PIC_LINUX_IRQ(OETH_IRQ),
176 .flags = IORESOURCE_IRQ,
177 },
178 };
179
180 static struct ethoc_platform_data ethoc_pdata = {
181 /*
182 * The MAC address for these boards is 00:50:c2:13:6f:xx.
183 * The last byte (here as zero) is read from the DIP switches on the
184 * board.
185 */
186 .hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
187 .phy_id = -1,
188 .big_endian = XCHAL_HAVE_BE,
189 };
190
191 static struct platform_device ethoc_device = {
192 .name = "ethoc",
193 .id = -1,
194 .num_resources = ARRAY_SIZE(ethoc_res),
195 .resource = ethoc_res,
196 .dev = {
197 .platform_data = ðoc_pdata,
198 },
199 };
200
201 /*----------------------------------------------------------------------------
202 * USB Host/Device -- Cypress CY7C67300
203 */
204
205 static struct resource c67x00_res[] = {
206 [0] = { /* register space */
207 .start = C67X00_PADDR,
208 .end = C67X00_PADDR + C67X00_SIZE - 1,
209 .flags = IORESOURCE_MEM,
210 },
211 [1] = { /* IRQ number */
212 .start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ),
213 .end = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ),
214 .flags = IORESOURCE_IRQ,
215 },
216 };
217
218 static struct c67x00_platform_data c67x00_pdata = {
219 .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED,
220 .hpi_regstep = 4,
221 };
222
223 static struct platform_device c67x00_device = {
224 .name = "c67x00",
225 .id = -1,
226 .num_resources = ARRAY_SIZE(c67x00_res),
227 .resource = c67x00_res,
228 .dev = {
229 .platform_data = &c67x00_pdata,
230 },
231 };
232
233 /*----------------------------------------------------------------------------
234 * UART
235 */
236
237 static struct resource serial_resource = {
238 .start = DUART16552_PADDR,
239 .end = DUART16552_PADDR + 0x1f,
240 .flags = IORESOURCE_MEM,
241 };
242
243 static struct plat_serial8250_port serial_platform_data[] = {
244 [0] = {
245 .mapbase = DUART16552_PADDR,
246 .irq = XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM),
247 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
248 UPF_IOREMAP,
249 .iotype = XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32,
250 .regshift = 2,
251 .uartclk = 0, /* set in xtavnet_init() */
252 },
253 { },
254 };
255
256 static struct platform_device xtavnet_uart = {
257 .name = "serial8250",
258 .id = PLAT8250_DEV_PLATFORM,
259 .dev = {
260 .platform_data = serial_platform_data,
261 },
262 .num_resources = 1,
263 .resource = &serial_resource,
264 };
265
266 /* platform devices */
267 static struct platform_device *platform_devices[] __initdata = {
268 ðoc_device,
269 &c67x00_device,
270 &xtavnet_uart,
271 };
272
273
274 static int __init xtavnet_init(void)
275 {
276 /* Ethernet MAC address. */
277 ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR;
278
279 /* Clock rate varies among FPGA bitstreams; board specific FPGA register
280 * reports the actual clock rate.
281 */
282 serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR;
283
284
285 /* register platform devices */
286 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
287
288 /* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user
289 * knows whether they set it correctly on the DIP switches.
290 */
291 pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
292 ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR;
293
294 xtfpga_register_handlers();
295
296 return 0;
297 }
298
299 /*
300 * Register to be done during do_initcalls().
301 */
302 arch_initcall(xtavnet_init);
303
304 #endif /* CONFIG_USE_OF */
305
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.