1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Copyright (C) 2018-2019 SiFive, Inc.
4 * Wesley Terpstra
5 * Paul Walmsley
6 */
7
8 #ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
9 #define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
10
11 #include <linux/types.h>
12
13 /* DIVQ_VALUES: number of valid DIVQ values */
14 #define DIVQ_VALUES 6
15
16 /*
17 * Bit definitions for struct wrpll_cfg.flags
18 *
19 * WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be
20 * programmed to enter bypass
21 * WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset
22 * WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal
23 * feedback mode
24 * WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external
25 * feedback mode (not yet supported by this driver)
26 */
27 #define WRPLL_FLAGS_BYPASS_SHIFT 0
28 #define WRPLL_FLAGS_BYPASS_MASK BIT(WRPLL_FLAGS_BYPASS_SHIFT)
29 #define WRPLL_FLAGS_RESET_SHIFT 1
30 #define WRPLL_FLAGS_RESET_MASK BIT(WRPLL_FLAGS_RESET_SHIFT)
31 #define WRPLL_FLAGS_INT_FEEDBACK_SHIFT 2
32 #define WRPLL_FLAGS_INT_FEEDBACK_MASK BIT(WRPLL_FLAGS_INT_FEEDBACK_SHIFT)
33 #define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT 3
34 #define WRPLL_FLAGS_EXT_FEEDBACK_MASK BIT(WRPLL_FLAGS_EXT_FEEDBACK_SHIFT)
35
36 /**
37 * struct wrpll_cfg - WRPLL configuration values
38 * @divr: reference divider value (6 bits), as presented to the PLL signals
39 * @divf: feedback divider value (9 bits), as presented to the PLL signals
40 * @divq: output divider value (3 bits), as presented to the PLL signals
41 * @flags: PLL configuration flags. See above for more information
42 * @range: PLL loop filter range. See below for more information
43 * @output_rate_cache: cached output rates, swept across DIVQ
44 * @parent_rate: PLL refclk rate for which values are valid
45 * @max_r: maximum possible R divider value, given @parent_rate
46 * @init_r: initial R divider value to start the search from
47 *
48 * @divr, @divq, @divq, @range represent what the PLL expects to see
49 * on its input signals. Thus @divr and @divf are the actual divisors
50 * minus one. @divq is a power-of-two divider; for example, 1 =
51 * divide-by-2 and 6 = divide-by-64. 0 is an invalid @divq value.
52 *
53 * When initially passing a struct wrpll_cfg record, the
54 * record should be zero-initialized with the exception of the @flags
55 * field. The only flag bits that need to be set are either
56 * WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK.
57 */
58 struct wrpll_cfg {
59 u8 divr;
60 u8 divq;
61 u8 range;
62 u8 flags;
63 u16 divf;
64 /* private: */
65 u32 output_rate_cache[DIVQ_VALUES];
66 unsigned long parent_rate;
67 u8 max_r;
68 u8 init_r;
69 };
70
71 int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate,
72 unsigned long parent_rate);
73
74 unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c);
75
76 unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c,
77 unsigned long parent_rate);
78
79 #endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */
80
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.