1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* header file for DIO boards for the HP300 architecture.
3 * Maybe this should handle DIO-II later?
4 * The general structure of this is vaguely based on how
5 * the Amiga port handles Zorro boards.
6 * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
7 * Converted to driver model Jochen Friedrich <jochen@scram.de>
8 *
9 * The board IDs are from the NetBSD kernel, which for once provided
10 * helpful comments...
11 *
12 * This goes with drivers/dio/dio.c
13 */
14
15 #ifndef _LINUX_DIO_H
16 #define _LINUX_DIO_H
17
18 /* The DIO boards in a system are distinguished by 'select codes' which
19 * range from 0-63 (DIO) and 132-255 (DIO-II).
20 * The DIO board with select code sc is located at physical address
21 * 0x600000 + sc * 0x10000
22 * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
23 * [0x800000-0x1000000) are for additional space required by things
24 * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
25 * On Linux, this is currently all mapped into the virtual address space
26 * at 0xf0000000 on bootup.
27 * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
28 * which is address range [0x1000000-0x20000000) -- too big to map completely,
29 * so currently we just don't handle DIO-II boards. It wouldn't be hard to
30 * do with ioremap() though.
31 */
32
33 #include <linux/device.h>
34
35 #ifdef __KERNEL__
36
37 #include <asm/hp300hw.h>
38
39 typedef __u16 dio_id;
40
41 /*
42 * DIO devices
43 */
44
45 struct dio_dev {
46 struct dio_bus *bus;
47 dio_id id;
48 int scode;
49 struct dio_driver *driver; /* which driver has allocated this device */
50 struct device dev; /* Generic device interface */
51 u8 ipl;
52 char name[64];
53 struct resource resource;
54 };
55
56 #define to_dio_dev(n) container_of(n, struct dio_dev, dev)
57
58 /*
59 * DIO bus
60 */
61
62 struct dio_bus {
63 struct list_head devices; /* list of devices on this bus */
64 unsigned int num_resources; /* number of resources */
65 struct resource resources[2]; /* address space routed to this bus */
66 struct device dev;
67 char name[10];
68 };
69
70 extern struct dio_bus dio_bus; /* Single DIO bus */
71 extern const struct bus_type dio_bus_type;
72
73 /*
74 * DIO device IDs
75 */
76
77 struct dio_device_id {
78 dio_id id; /* Device ID or DIO_WILDCARD */
79 unsigned long driver_data; /* Data private to the driver */
80 };
81
82 /*
83 * DIO device drivers
84 */
85
86 struct dio_driver {
87 struct list_head node;
88 char *name;
89 const struct dio_device_id *id_table; /* NULL if wants all devices */
90 int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
91 /* New device inserted */
92 void (*remove)(struct dio_dev *z); /* Device removed (NULL if not a hot-plug capable driver) */
93 struct device_driver driver;
94 };
95
96 #define to_dio_driver(drv) container_of_const(drv, struct dio_driver, driver)
97
98 /* DIO/DIO-II boards all have the following 8bit registers.
99 * These are offsets from the base of the device.
100 */
101 #define DIO_IDOFF 0x01 /* primary device ID */
102 #define DIO_IPLOFF 0x03 /* interrupt priority level */
103 #define DIO_SECIDOFF 0x15 /* secondary device ID */
104 #define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */
105 #define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */
106
107 #define DIO_BASE 0x600000 /* start of DIO space */
108 #define DIO_END 0x1000000 /* end of DIO space */
109 #define DIO_DEVSIZE 0x10000 /* size of a DIO device */
110
111 #define DIOII_BASE 0x01000000 /* start of DIO-II space */
112 #define DIOII_END 0x20000000 /* end of DIO-II space */
113 #define DIOII_DEVSIZE 0x00400000 /* size of a DIO-II device */
114
115 /* Highest valid select code. If we add DIO-II support this should become
116 * 256 for everything except HP320, which only has DIO.
117 */
118 #define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
119 #define DIOII_SCBASE 132 /* lowest DIO-II select code */
120 #define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
121 #define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
122
123 /* macros to read device IDs, given base address */
124 #define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
125 #define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)
126
127 /* extract the interrupt level */
128 #define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)
129
130 /* find the size of a DIO-II board's address space.
131 * DIO boards are all fixed length.
132 */
133 #define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)
134
135 /* general purpose macro for both DIO and DIO-II */
136 #define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)
137
138 /* The hardware has primary and secondary IDs; we encode these in a single
139 * int as PRIMARY ID & (SECONDARY ID << 8).
140 * In practice this is only important for framebuffers,
141 * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
142 */
143 #define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
144 /* macro to determine whether a given primary ID requires a secondary ID byte */
145 #define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
146 #define DIO_WILDCARD 0xff
147
148 /* Now a whole slew of macros giving device IDs and descriptive strings: */
149 #define DIO_ID_DCA0 0x02 /* 98644A serial */
150 #define DIO_DESC_DCA0 "98644A DCA0 serial"
151 #define DIO_ID_DCA0REM 0x82 /* 98644A serial */
152 #define DIO_DESC_DCA0REM "98644A DCA0REM serial"
153 #define DIO_ID_DCA1 0x42 /* 98644A serial */
154 #define DIO_DESC_DCA1 "98644A DCA1 serial"
155 #define DIO_ID_DCA1REM 0xc2 /* 98644A serial */
156 #define DIO_DESC_DCA1REM "98644A DCA1REM serial"
157 #define DIO_ID_DCM 0x05 /* 98642A serial MUX */
158 #define DIO_DESC_DCM "98642A DCM serial MUX"
159 #define DIO_ID_DCMREM 0x85 /* 98642A serial MUX */
160 #define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
161 #define DIO_ID_LAN 0x15 /* 98643A LAN */
162 #define DIO_DESC_LAN "98643A LANCE ethernet"
163 #define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */
164 #define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
165 #define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */
166 #define DIO_DESC_NHPIB "98624A HPIB"
167 #define DIO_ID_SCSI0 0x07 /* 98265A SCSI */
168 #define DIO_DESC_SCSI0 "98265A SCSI0"
169 #define DIO_ID_SCSI1 0x27 /* ditto */
170 #define DIO_DESC_SCSI1 "98265A SCSI1"
171 #define DIO_ID_SCSI2 0x47 /* ditto */
172 #define DIO_DESC_SCSI2 "98265A SCSI2"
173 #define DIO_ID_SCSI3 0x67 /* ditto */
174 #define DIO_DESC_SCSI3 "98265A SCSI3"
175 #define DIO_ID_FBUFFER 0x39 /* framebuffer: flavour is distinguished by secondary ID */
176 #define DIO_DESC_FBUFFER "bitmapped display"
177 /* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
178 #define DIO_ID_MISC0 0x03 /* 98622A */
179 #define DIO_DESC_MISC0 "98622A"
180 #define DIO_ID_MISC1 0x04 /* 98623A */
181 #define DIO_DESC_MISC1 "98623A"
182 #define DIO_ID_PARALLEL 0x06 /* internal parallel */
183 #define DIO_DESC_PARALLEL "internal parallel"
184 #define DIO_ID_MISC2 0x09 /* 98287A keyboard */
185 #define DIO_DESC_MISC2 "98287A keyboard"
186 #define DIO_ID_MISC3 0x0a /* HP98635A FP accelerator */
187 #define DIO_DESC_MISC3 "HP98635A FP accelerator"
188 #define DIO_ID_MISC4 0x0b /* timer */
189 #define DIO_DESC_MISC4 "timer"
190 #define DIO_ID_MISC5 0x12 /* 98640A */
191 #define DIO_DESC_MISC5 "98640A"
192 #define DIO_ID_MISC6 0x16 /* 98659A */
193 #define DIO_DESC_MISC6 "98659A"
194 #define DIO_ID_MISC7 0x19 /* 237 display */
195 #define DIO_DESC_MISC7 "237 display"
196 #define DIO_ID_MISC8 0x1a /* quad-wide card */
197 #define DIO_DESC_MISC8 "quad-wide card"
198 #define DIO_ID_MISC9 0x1b /* 98253A */
199 #define DIO_DESC_MISC9 "98253A"
200 #define DIO_ID_MISC10 0x1c /* 98627A */
201 #define DIO_DESC_MISC10 "98253A"
202 #define DIO_ID_MISC11 0x1d /* 98633A */
203 #define DIO_DESC_MISC11 "98633A"
204 #define DIO_ID_MISC12 0x1e /* 98259A */
205 #define DIO_DESC_MISC12 "98259A"
206 #define DIO_ID_MISC13 0x1f /* 8741 */
207 #define DIO_DESC_MISC13 "8741"
208 #define DIO_ID_VME 0x31 /* 98577A VME adapter */
209 #define DIO_DESC_VME "98577A VME adapter"
210 #define DIO_ID_DCL 0x34 /* 98628A serial */
211 #define DIO_DESC_DCL "98628A DCL serial"
212 #define DIO_ID_DCLREM 0xb4 /* 98628A serial */
213 #define DIO_DESC_DCLREM "98628A DCLREM serial"
214 /* These are the secondary IDs for the framebuffers */
215 #define DIO_ID2_GATORBOX 0x01 /* 98700/98710 "gatorbox" */
216 #define DIO_DESC2_GATORBOX "98700/98710 \"gatorbox\" display"
217 #define DIO_ID2_TOPCAT 0x02 /* 98544/98545/98547 "topcat" */
218 #define DIO_DESC2_TOPCAT "98544/98545/98547 \"topcat\" display"
219 #define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
220 #define DIO_DESC2_RENAISSANCE "98720/98721 \"renaissance\" display"
221 #define DIO_ID2_LRCATSEYE 0x05 /* lowres "catseye" */
222 #define DIO_DESC2_LRCATSEYE "low-res catseye display"
223 #define DIO_ID2_HRCCATSEYE 0x06 /* highres colour "catseye" */
224 #define DIO_DESC2_HRCCATSEYE "high-res color catseye display"
225 #define DIO_ID2_HRMCATSEYE 0x07 /* highres mono "catseye" */
226 #define DIO_DESC2_HRMCATSEYE "high-res mono catseye display"
227 #define DIO_ID2_DAVINCI 0x08 /* 98730/98731 "davinci" */
228 #define DIO_DESC2_DAVINCI "98730/98731 \"davinci\" display"
229 #define DIO_ID2_XXXCATSEYE 0x09 /* "catseye" */
230 #define DIO_DESC2_XXXCATSEYE "catseye display"
231 #define DIO_ID2_HYPERION 0x0e /* A1096A "hyperion" */
232 #define DIO_DESC2_HYPERION "A1096A \"hyperion\" display"
233 #define DIO_ID2_XGENESIS 0x0b /* "x-genesis"; no NetBSD support */
234 #define DIO_DESC2_XGENESIS "\"x-genesis\" display"
235 #define DIO_ID2_TIGER 0x0c /* "tiger"; no NetBSD support */
236 #define DIO_DESC2_TIGER "\"tiger\" display"
237 #define DIO_ID2_YGENESIS 0x0d /* "y-genesis"; no NetBSD support */
238 #define DIO_DESC2_YGENESIS "\"y-genesis\" display"
239 /* if you add new IDs then you should tell dio.c about them so it can
240 * identify them...
241 */
242
243 extern int dio_find(int deviceid);
244 extern unsigned long dio_scodetophysaddr(int scode);
245 extern int dio_create_sysfs_dev_files(struct dio_dev *);
246
247 /* New-style probing */
248 extern int dio_register_driver(struct dio_driver *);
249 extern void dio_unregister_driver(struct dio_driver *);
250
251 #define dio_resource_start(d) ((d)->resource.start)
252 #define dio_resource_end(d) ((d)->resource.end)
253 #define dio_resource_len(d) (resource_size(&(d)->resource))
254 #define dio_resource_flags(d) ((d)->resource.flags)
255
256 #define dio_request_device(d, name) \
257 request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
258 #define dio_release_device(d) \
259 release_mem_region(dio_resource_start(d), dio_resource_len(d))
260
261 /* Similar to the helpers above, these manipulate per-dio_dev
262 * driver-specific data. They are really just a wrapper around
263 * the generic device structure functions of these calls.
264 */
265 static inline void *dio_get_drvdata (struct dio_dev *d)
266 {
267 return dev_get_drvdata(&d->dev);
268 }
269
270 static inline void dio_set_drvdata (struct dio_dev *d, void *data)
271 {
272 dev_set_drvdata(&d->dev, data);
273 }
274
275 #endif /* __KERNEL__ */
276 #endif /* ndef _LINUX_DIO_H */
277
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.