1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Support for the xscale frame buffer.
4 *
5 * Author: Jean-Frederic Clere
6 * Created: Sep 22, 2003
7 * Copyright: jfclere@sinix.net
8 */
9
10 #include <linux/fb.h>
11
12 /*
13 * Supported LCD connections
14 *
15 * bits 0 - 3: for LCD panel type:
16 *
17 * STN - for passive matrix
18 * DSTN - for dual scan passive matrix
19 * TFT - for active matrix
20 *
21 * bits 4 - 9 : for bus width
22 * bits 10-17 : for AC Bias Pin Frequency
23 * bit 18 : for output enable polarity
24 * bit 19 : for pixel clock edge
25 * bit 20 : for output pixel format when base is RGBT16
26 */
27 #define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
28 #define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
29
30 #define LCD_TYPE_MASK 0xf
31 #define LCD_TYPE_UNKNOWN 0
32 #define LCD_TYPE_MONO_STN 1
33 #define LCD_TYPE_MONO_DSTN 2
34 #define LCD_TYPE_COLOR_STN 3
35 #define LCD_TYPE_COLOR_DSTN 4
36 #define LCD_TYPE_COLOR_TFT 5
37 #define LCD_TYPE_SMART_PANEL 6
38 #define LCD_TYPE_MAX 7
39
40 #define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN)
41 #define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN)
42 #define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN)
43 #define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN)
44 #define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN)
45 #define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT)
46 #define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT)
47 #define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT)
48 #define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL)
49 #define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL)
50 #define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
51
52 #define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
53 #define LCD_BIAS_ACTIVE_HIGH (0 << 18)
54 #define LCD_BIAS_ACTIVE_LOW (1 << 18)
55 #define LCD_PCLK_EDGE_RISE (0 << 19)
56 #define LCD_PCLK_EDGE_FALL (1 << 19)
57 #define LCD_ALTERNATE_MAPPING (1 << 20)
58
59 /*
60 * This structure describes the machine which we are running on.
61 * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
62 * of linux/drivers/video/pxafb.c
63 */
64 struct pxafb_mode_info {
65 u_long pixclock;
66
67 u_short xres;
68 u_short yres;
69
70 u_char bpp;
71 u_int cmap_greyscale:1,
72 depth:8,
73 transparency:1,
74 unused:22;
75
76 /* Parallel Mode Timing */
77 u_char hsync_len;
78 u_char left_margin;
79 u_char right_margin;
80
81 u_char vsync_len;
82 u_char upper_margin;
83 u_char lower_margin;
84 u_char sync;
85
86 /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
87 * Note:
88 * 1. all parameters in nanosecond (ns)
89 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
90 * in pxa27x and pxa3xx, initialize them to the same value or
91 * the larger one will be used
92 * 3. same to {rd,wr}_pulse_width
93 *
94 * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
95 * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
96 * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
97 */
98 unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
99 unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
100 unsigned wr_pulse_width; /* L_PCLK_WR pulse width */
101 unsigned rd_pulse_width; /* L_FCLK_RD pulse width */
102 unsigned cmd_inh_time; /* Command Inhibit time between two writes */
103 unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */
104 };
105
106 struct pxafb_mach_info {
107 struct pxafb_mode_info *modes;
108 unsigned int num_modes;
109
110 unsigned int lcd_conn;
111 unsigned long video_mem_size;
112
113 u_int fixed_modes:1,
114 cmap_inverse:1,
115 cmap_static:1,
116 acceleration_enabled:1,
117 unused:28;
118
119 /* The following should be defined in LCCR0
120 * LCCR0_Act or LCCR0_Pas Active or Passive
121 * LCCR0_Sngl or LCCR0_Dual Single/Dual panel
122 * LCCR0_Mono or LCCR0_Color Mono/Color
123 * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
124 * LCCR0_DMADel(Tcpu) (optional) DMA request delay
125 *
126 * The following should not be defined in LCCR0:
127 * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
128 * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
129 */
130 u_int lccr0;
131 /* The following should be defined in LCCR3
132 * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity
133 * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
134 * LCCR3_Acb(X) AB Bias pin frequency
135 * LCCR3_DPC (optional) Double Pixel Clock mode (untested)
136 *
137 * The following should not be defined in LCCR3
138 * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
139 */
140 u_int lccr3;
141 /* The following should be defined in LCCR4
142 * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
143 *
144 * All other bits in LCCR4 should be left alone.
145 */
146 u_int lccr4;
147 void (*pxafb_backlight_power)(int);
148 void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
149 void (*smart_update)(struct fb_info *);
150 };
151
152 void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
153 unsigned long pxafb_get_hsync_time(struct device *dev);
154
155 /* smartpanel related */
156 #define SMART_CMD_A0 (0x1 << 8)
157 #define SMART_CMD_READ_STATUS_REG (0x0 << 9)
158 #define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
159 #define SMART_CMD_WRITE_COMMAND (0x1 << 9)
160 #define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
161 #define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
162 #define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
163 #define SMART_CMD_NOOP (0x4 << 9)
164 #define SMART_CMD_INTERRUPT (0x5 << 9)
165
166 #define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
167 #define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
168
169 /* SMART_DELAY() is introduced for software controlled delay primitive which
170 * can be inserted between command sequences, unused command 0x6 is used here
171 * and delay ranges from 0ms ~ 255ms
172 */
173 #define SMART_CMD_DELAY (0x6 << 9)
174 #define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff))
175
176 #ifdef CONFIG_FB_PXA_SMARTPANEL
177 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
178 extern int pxafb_smart_flush(struct fb_info *info);
179 #else
180 static inline int pxafb_smart_queue(struct fb_info *info,
181 uint16_t *cmds, int n)
182 {
183 return 0;
184 }
185
186 static inline int pxafb_smart_flush(struct fb_info *info)
187 {
188 return 0;
189 }
190 #endif
191
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.