1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 #ifndef __SOUND_AK4113_H
3 #define __SOUND_AK4113_H
4
5 /*
6 * Routines for Asahi Kasei AK4113
7 * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
8 * Copyright (c) by Pavel Hofman <pavel.hofman@ivitera.com>,
9 */
10
11 /* AK4113 registers */
12 /* power down */
13 #define AK4113_REG_PWRDN 0x00
14 /* format control */
15 #define AK4113_REG_FORMAT 0x01
16 /* input/output control */
17 #define AK4113_REG_IO0 0x02
18 /* input/output control */
19 #define AK4113_REG_IO1 0x03
20 /* interrupt0 mask */
21 #define AK4113_REG_INT0_MASK 0x04
22 /* interrupt1 mask */
23 #define AK4113_REG_INT1_MASK 0x05
24 /* DAT mask & DTS select */
25 #define AK4113_REG_DATDTS 0x06
26 /* receiver status 0 */
27 #define AK4113_REG_RCS0 0x07
28 /* receiver status 1 */
29 #define AK4113_REG_RCS1 0x08
30 /* receiver status 2 */
31 #define AK4113_REG_RCS2 0x09
32 /* RX channel status byte 0 */
33 #define AK4113_REG_RXCSB0 0x0a
34 /* RX channel status byte 1 */
35 #define AK4113_REG_RXCSB1 0x0b
36 /* RX channel status byte 2 */
37 #define AK4113_REG_RXCSB2 0x0c
38 /* RX channel status byte 3 */
39 #define AK4113_REG_RXCSB3 0x0d
40 /* RX channel status byte 4 */
41 #define AK4113_REG_RXCSB4 0x0e
42 /* burst preamble Pc byte 0 */
43 #define AK4113_REG_Pc0 0x0f
44 /* burst preamble Pc byte 1 */
45 #define AK4113_REG_Pc1 0x10
46 /* burst preamble Pd byte 0 */
47 #define AK4113_REG_Pd0 0x11
48 /* burst preamble Pd byte 1 */
49 #define AK4113_REG_Pd1 0x12
50 /* Q-subcode address + control */
51 #define AK4113_REG_QSUB_ADDR 0x13
52 /* Q-subcode track */
53 #define AK4113_REG_QSUB_TRACK 0x14
54 /* Q-subcode index */
55 #define AK4113_REG_QSUB_INDEX 0x15
56 /* Q-subcode minute */
57 #define AK4113_REG_QSUB_MINUTE 0x16
58 /* Q-subcode second */
59 #define AK4113_REG_QSUB_SECOND 0x17
60 /* Q-subcode frame */
61 #define AK4113_REG_QSUB_FRAME 0x18
62 /* Q-subcode zero */
63 #define AK4113_REG_QSUB_ZERO 0x19
64 /* Q-subcode absolute minute */
65 #define AK4113_REG_QSUB_ABSMIN 0x1a
66 /* Q-subcode absolute second */
67 #define AK4113_REG_QSUB_ABSSEC 0x1b
68 /* Q-subcode absolute frame */
69 #define AK4113_REG_QSUB_ABSFRM 0x1c
70
71 /* sizes */
72 #define AK4113_REG_RXCSB_SIZE ((AK4113_REG_RXCSB4-AK4113_REG_RXCSB0)+1)
73 #define AK4113_REG_QSUB_SIZE ((AK4113_REG_QSUB_ABSFRM-AK4113_REG_QSUB_ADDR)\
74 +1)
75
76 #define AK4113_WRITABLE_REGS (AK4113_REG_DATDTS + 1)
77
78 /* AK4113_REG_PWRDN bits */
79 /* Channel Status Select */
80 #define AK4113_CS12 (1<<7)
81 /* Block Start & C/U Output Mode */
82 #define AK4113_BCU (1<<6)
83 /* Master Clock Operation Select */
84 #define AK4113_CM1 (1<<5)
85 /* Master Clock Operation Select */
86 #define AK4113_CM0 (1<<4)
87 /* Master Clock Frequency Select */
88 #define AK4113_OCKS1 (1<<3)
89 /* Master Clock Frequency Select */
90 #define AK4113_OCKS0 (1<<2)
91 /* 0 = power down, 1 = normal operation */
92 #define AK4113_PWN (1<<1)
93 /* 0 = reset & initialize (except thisregister), 1 = normal operation */
94 #define AK4113_RST (1<<0)
95
96 /* AK4113_REQ_FORMAT bits */
97 /* V/TX Output select: 0 = Validity Flag Output, 1 = TX */
98 #define AK4113_VTX (1<<7)
99 /* Audio Data Control */
100 #define AK4113_DIF2 (1<<6)
101 /* Audio Data Control */
102 #define AK4113_DIF1 (1<<5)
103 /* Audio Data Control */
104 #define AK4113_DIF0 (1<<4)
105 /* Deemphasis Autodetect Enable (1 = enable) */
106 #define AK4113_DEAU (1<<3)
107 /* 32kHz-48kHz Deemphasis Control */
108 #define AK4113_DEM1 (1<<2)
109 /* 32kHz-48kHz Deemphasis Control */
110 #define AK4113_DEM0 (1<<1)
111 #define AK4113_DEM_OFF (AK4113_DEM0)
112 #define AK4113_DEM_44KHZ (0)
113 #define AK4113_DEM_48KHZ (AK4113_DEM1)
114 #define AK4113_DEM_32KHZ (AK4113_DEM0|AK4113_DEM1)
115 /* STDO: 16-bit, right justified */
116 #define AK4113_DIF_16R (0)
117 /* STDO: 18-bit, right justified */
118 #define AK4113_DIF_18R (AK4113_DIF0)
119 /* STDO: 20-bit, right justified */
120 #define AK4113_DIF_20R (AK4113_DIF1)
121 /* STDO: 24-bit, right justified */
122 #define AK4113_DIF_24R (AK4113_DIF1|AK4113_DIF0)
123 /* STDO: 24-bit, left justified */
124 #define AK4113_DIF_24L (AK4113_DIF2)
125 /* STDO: I2S */
126 #define AK4113_DIF_24I2S (AK4113_DIF2|AK4113_DIF0)
127 /* STDO: 24-bit, left justified; LRCLK, BICK = Input */
128 #define AK4113_DIF_I24L (AK4113_DIF2|AK4113_DIF1)
129 /* STDO: I2S; LRCLK, BICK = Input */
130 #define AK4113_DIF_I24I2S (AK4113_DIF2|AK4113_DIF1|AK4113_DIF0)
131
132 /* AK4113_REG_IO0 */
133 /* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
134 #define AK4113_XTL1 (1<<6)
135 /* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
136 #define AK4113_XTL0 (1<<5)
137 /* Block Start Signal Output: 0 = U-bit, 1 = C-bit (req. BCU = 1) */
138 #define AK4113_UCE (1<<4)
139 /* TX Output Enable (1 = enable) */
140 #define AK4113_TXE (1<<3)
141 /* Output Through Data Selector for TX pin */
142 #define AK4113_OPS2 (1<<2)
143 /* Output Through Data Selector for TX pin */
144 #define AK4113_OPS1 (1<<1)
145 /* Output Through Data Selector for TX pin */
146 #define AK4113_OPS0 (1<<0)
147 /* 11.2896 MHz ref. Xtal freq. */
148 #define AK4113_XTL_11_2896M (0)
149 /* 12.288 MHz ref. Xtal freq. */
150 #define AK4113_XTL_12_288M (AK4113_XTL0)
151 /* 24.576 MHz ref. Xtal freq. */
152 #define AK4113_XTL_24_576M (AK4113_XTL1)
153
154 /* AK4113_REG_IO1 */
155 /* Interrupt 0 pin Hold */
156 #define AK4113_EFH1 (1<<7)
157 /* Interrupt 0 pin Hold */
158 #define AK4113_EFH0 (1<<6)
159 #define AK4113_EFH_512LRCLK (0)
160 #define AK4113_EFH_1024LRCLK (AK4113_EFH0)
161 #define AK4113_EFH_2048LRCLK (AK4113_EFH1)
162 #define AK4113_EFH_4096LRCLK (AK4113_EFH1|AK4113_EFH0)
163 /* PLL Lock Time: 0 = 384/fs, 1 = 1/fs */
164 #define AK4113_FAST (1<<5)
165 /* MCKO2 Output Select: 0 = CMx/OCKSx, 1 = Xtal */
166 #define AK4113_XMCK (1<<4)
167 /* MCKO2 Output Freq. Select: 0 = x1, 1 = x0.5 (req. XMCK = 1) */
168 #define AK4113_DIV (1<<3)
169 /* Input Recovery Data Select */
170 #define AK4113_IPS2 (1<<2)
171 /* Input Recovery Data Select */
172 #define AK4113_IPS1 (1<<1)
173 /* Input Recovery Data Select */
174 #define AK4113_IPS0 (1<<0)
175 #define AK4113_IPS(x) ((x)&7)
176
177 /* AK4113_REG_INT0_MASK && AK4113_REG_INT1_MASK*/
178 /* mask enable for QINT bit */
179 #define AK4113_MQI (1<<7)
180 /* mask enable for AUTO bit */
181 #define AK4113_MAUT (1<<6)
182 /* mask enable for CINT bit */
183 #define AK4113_MCIT (1<<5)
184 /* mask enable for UNLOCK bit */
185 #define AK4113_MULK (1<<4)
186 /* mask enable for V bit */
187 #define AK4113_V (1<<3)
188 /* mask enable for STC bit */
189 #define AK4113_STC (1<<2)
190 /* mask enable for AUDN bit */
191 #define AK4113_MAN (1<<1)
192 /* mask enable for PAR bit */
193 #define AK4113_MPR (1<<0)
194
195 /* AK4113_REG_DATDTS */
196 /* DAT Start ID Counter */
197 #define AK4113_DCNT (1<<4)
198 /* DTS-CD 16-bit Sync Word Detect */
199 #define AK4113_DTS16 (1<<3)
200 /* DTS-CD 14-bit Sync Word Detect */
201 #define AK4113_DTS14 (1<<2)
202 /* mask enable for DAT bit (if 1, no INT1 effect */
203 #define AK4113_MDAT1 (1<<1)
204 /* mask enable for DAT bit (if 1, no INT0 effect */
205 #define AK4113_MDAT0 (1<<0)
206
207 /* AK4113_REG_RCS0 */
208 /* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
209 #define AK4113_QINT (1<<7)
210 /* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
211 #define AK4113_AUTO (1<<6)
212 /* channel status buffer interrupt, 0 = no change, 1 = change */
213 #define AK4113_CINT (1<<5)
214 /* PLL lock status, 0 = lock, 1 = unlock */
215 #define AK4113_UNLCK (1<<4)
216 /* Validity bit, 0 = valid, 1 = invalid */
217 #define AK4113_V (1<<3)
218 /* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
219 #define AK4113_STC (1<<2)
220 /* audio bit output, 0 = audio, 1 = non-audio */
221 #define AK4113_AUDION (1<<1)
222 /* parity error or biphase error status, 0 = no error, 1 = error */
223 #define AK4113_PAR (1<<0)
224
225 /* AK4113_REG_RCS1 */
226 /* sampling frequency detection */
227 #define AK4113_FS3 (1<<7)
228 #define AK4113_FS2 (1<<6)
229 #define AK4113_FS1 (1<<5)
230 #define AK4113_FS0 (1<<4)
231 /* Pre-emphasis detect, 0 = OFF, 1 = ON */
232 #define AK4113_PEM (1<<3)
233 /* DAT Start ID Detect, 0 = no detect, 1 = detect */
234 #define AK4113_DAT (1<<2)
235 /* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
236 #define AK4113_DTSCD (1<<1)
237 /* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
238 #define AK4113_NPCM (1<<0)
239 #define AK4113_FS_8000HZ (AK4113_FS3|AK4113_FS0)
240 #define AK4113_FS_11025HZ (AK4113_FS2|AK4113_FS0)
241 #define AK4113_FS_16000HZ (AK4113_FS2|AK4113_FS1|AK4113_FS0)
242 #define AK4113_FS_22050HZ (AK4113_FS2)
243 #define AK4113_FS_24000HZ (AK4113_FS2|AK4113_FS1)
244 #define AK4113_FS_32000HZ (AK4113_FS1|AK4113_FS0)
245 #define AK4113_FS_44100HZ (0)
246 #define AK4113_FS_48000HZ (AK4113_FS1)
247 #define AK4113_FS_64000HZ (AK4113_FS3|AK4113_FS1|AK4113_FS0)
248 #define AK4113_FS_88200HZ (AK4113_FS3)
249 #define AK4113_FS_96000HZ (AK4113_FS3|AK4113_FS1)
250 #define AK4113_FS_176400HZ (AK4113_FS3|AK4113_FS2)
251 #define AK4113_FS_192000HZ (AK4113_FS3|AK4113_FS2|AK4113_FS1)
252
253 /* AK4113_REG_RCS2 */
254 /* CRC for Q-subcode, 0 = no error, 1 = error */
255 #define AK4113_QCRC (1<<1)
256 /* CRC for channel status, 0 = no error, 1 = error */
257 #define AK4113_CCRC (1<<0)
258
259 /* flags for snd_ak4113_check_rate_and_errors() */
260 #define AK4113_CHECK_NO_STAT (1<<0) /* no statistics */
261 #define AK4113_CHECK_NO_RATE (1<<1) /* no rate check */
262
263 #define AK4113_CONTROLS 13
264
265 typedef void (ak4113_write_t)(void *private_data, unsigned char addr,
266 unsigned char data);
267 typedef unsigned char (ak4113_read_t)(void *private_data, unsigned char addr);
268
269 enum {
270 AK4113_PARITY_ERRORS,
271 AK4113_V_BIT_ERRORS,
272 AK4113_QCRC_ERRORS,
273 AK4113_CCRC_ERRORS,
274 AK4113_NUM_ERRORS
275 };
276
277 struct ak4113 {
278 struct snd_card *card;
279 ak4113_write_t *write;
280 ak4113_read_t *read;
281 void *private_data;
282 atomic_t wq_processing;
283 struct mutex reinit_mutex;
284 spinlock_t lock;
285 unsigned char regmap[AK4113_WRITABLE_REGS];
286 struct snd_kcontrol *kctls[AK4113_CONTROLS];
287 struct snd_pcm_substream *substream;
288 unsigned long errors[AK4113_NUM_ERRORS];
289 unsigned char rcs0;
290 unsigned char rcs1;
291 unsigned char rcs2;
292 struct delayed_work work;
293 unsigned int check_flags;
294 void *change_callback_private;
295 void (*change_callback)(struct ak4113 *ak4113, unsigned char c0,
296 unsigned char c1);
297 };
298
299 int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
300 ak4113_write_t *write,
301 const unsigned char *pgm,
302 void *private_data, struct ak4113 **r_ak4113);
303 void snd_ak4113_reg_write(struct ak4113 *ak4113, unsigned char reg,
304 unsigned char mask, unsigned char val);
305 void snd_ak4113_reinit(struct ak4113 *ak4113);
306 int snd_ak4113_build(struct ak4113 *ak4113,
307 struct snd_pcm_substream *capture_substream);
308 int snd_ak4113_external_rate(struct ak4113 *ak4113);
309 int snd_ak4113_check_rate_and_errors(struct ak4113 *ak4113, unsigned int flags);
310
311 #ifdef CONFIG_PM
312 void snd_ak4113_suspend(struct ak4113 *chip);
313 void snd_ak4113_resume(struct ak4113 *chip);
314 #else
315 static inline void snd_ak4113_suspend(struct ak4113 *chip) {}
316 static inline void snd_ak4113_resume(struct ak4113 *chip) {}
317 #endif
318
319 #endif /* __SOUND_AK4113_H */
320
321
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.