1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /*
3 * lirc.h - linux infrared remote control header file
4 */
5
6 #ifndef _LINUX_LIRC_H
7 #define _LINUX_LIRC_H
8
9 #include <linux/types.h>
10 #include <linux/ioctl.h>
11
12 #define PULSE_BIT 0x01000000
13 #define PULSE_MASK 0x00FFFFFF
14
15 #define LIRC_MODE2_SPACE 0x00000000
16 #define LIRC_MODE2_PULSE 0x01000000
17 #define LIRC_MODE2_FREQUENCY 0x02000000
18 #define LIRC_MODE2_TIMEOUT 0x03000000
19 #define LIRC_MODE2_OVERFLOW 0x04000000
20
21 #define LIRC_VALUE_MASK 0x00FFFFFF
22 #define LIRC_MODE2_MASK 0xFF000000
23
24 #define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
25 #define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
26 #define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
27 #define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
28 #define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW)
29
30 #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
31 #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
32
33 #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
34 #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
35 #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
36 #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
37 #define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW)
38
39 /* used heavily by lirc userspace */
40 #define lirc_t int
41
42 /*** lirc compatible hardware features ***/
43
44 #define LIRC_MODE2SEND(x) (x)
45 #define LIRC_SEND2MODE(x) (x)
46 #define LIRC_MODE2REC(x) ((x) << 16)
47 #define LIRC_REC2MODE(x) ((x) >> 16)
48
49 #define LIRC_MODE_RAW 0x00000001
50 #define LIRC_MODE_PULSE 0x00000002
51 #define LIRC_MODE_MODE2 0x00000004
52 #define LIRC_MODE_SCANCODE 0x00000008
53 #define LIRC_MODE_LIRCCODE 0x00000010
54
55
56 #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW)
57 #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE)
58 #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2)
59 #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
60
61 #define LIRC_CAN_SEND_MASK 0x0000003f
62
63 #define LIRC_CAN_SET_SEND_CARRIER 0x00000100
64 #define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200
65 #define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400
66
67 #define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW)
68 #define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE)
69 #define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2)
70 #define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE)
71 #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
72
73 #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
74
75 #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
76
77 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
78 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
79 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
80
81 #define LIRC_CAN_MEASURE_CARRIER 0x02000000
82 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
83
84 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
85 #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
86
87 /*
88 * Unused features. These features were never implemented, in tree or
89 * out of tree. These definitions are here so not to break the lircd build.
90 */
91 #define LIRC_CAN_SET_REC_FILTER 0
92 #define LIRC_CAN_NOTIFY_DECODE 0
93
94 /*** IOCTL commands for lirc driver ***/
95
96 #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
97
98 #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
99 #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
100 #define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32)
101
102 #define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32)
103 #define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32)
104
105 /* code length in bits, currently only for LIRC_MODE_LIRCCODE */
106 #define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32)
107
108 #define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32)
109 #define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32)
110 /* Note: these can reset the according pulse_width */
111 #define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32)
112 #define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32)
113 #define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32)
114 #define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32)
115
116 /*
117 * when a timeout != 0 is set the driver will send a
118 * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
119 * never sent, timeout is disabled by default
120 */
121 #define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32)
122
123 /* 1 enables, 0 disables timeout reports in MODE2 */
124 #define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32)
125
126 /*
127 * if enabled from the next key press on the driver will send
128 * LIRC_MODE2_FREQUENCY packets
129 */
130 #define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
131
132 /*
133 * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
134 * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
135 */
136 #define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32)
137
138 #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
139
140 /*
141 * Return the recording timeout, which is either set by
142 * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
143 */
144 #define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32)
145
146 /**
147 * struct lirc_scancode - decoded scancode with protocol for use with
148 * LIRC_MODE_SCANCODE
149 *
150 * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
151 * was decoded.
152 * @flags: should be 0 for transmit. When receiving scancodes,
153 * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
154 * depending on the protocol
155 * @rc_proto: see enum rc_proto
156 * @keycode: the translated keycode. Set to 0 for transmit.
157 * @scancode: the scancode received or to be sent
158 */
159 struct lirc_scancode {
160 __u64 timestamp;
161 __u16 flags;
162 __u16 rc_proto;
163 __u32 keycode;
164 __u64 scancode;
165 };
166
167 /* Set if the toggle bit of rc-5 or rc-6 is enabled */
168 #define LIRC_SCANCODE_FLAG_TOGGLE 1
169 /* Set if this is a nec or sanyo repeat */
170 #define LIRC_SCANCODE_FLAG_REPEAT 2
171
172 /**
173 * enum rc_proto - the Remote Controller protocol
174 *
175 * @RC_PROTO_UNKNOWN: Protocol not known
176 * @RC_PROTO_OTHER: Protocol known but proprietary
177 * @RC_PROTO_RC5: Philips RC5 protocol
178 * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
179 * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
180 * @RC_PROTO_JVC: JVC protocol
181 * @RC_PROTO_SONY12: Sony 12 bit protocol
182 * @RC_PROTO_SONY15: Sony 15 bit protocol
183 * @RC_PROTO_SONY20: Sony 20 bit protocol
184 * @RC_PROTO_NEC: NEC protocol
185 * @RC_PROTO_NECX: Extended NEC protocol
186 * @RC_PROTO_NEC32: NEC 32 bit protocol
187 * @RC_PROTO_SANYO: Sanyo protocol
188 * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
189 * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
190 * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
191 * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
192 * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
193 * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
194 * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
195 * @RC_PROTO_SHARP: Sharp protocol
196 * @RC_PROTO_XMP: XMP protocol
197 * @RC_PROTO_CEC: CEC protocol
198 * @RC_PROTO_IMON: iMon Pad protocol
199 * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
200 * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
201 * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
202 * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol
203 * @RC_PROTO_MAX: Maximum value of enum rc_proto
204 */
205 enum rc_proto {
206 RC_PROTO_UNKNOWN = 0,
207 RC_PROTO_OTHER = 1,
208 RC_PROTO_RC5 = 2,
209 RC_PROTO_RC5X_20 = 3,
210 RC_PROTO_RC5_SZ = 4,
211 RC_PROTO_JVC = 5,
212 RC_PROTO_SONY12 = 6,
213 RC_PROTO_SONY15 = 7,
214 RC_PROTO_SONY20 = 8,
215 RC_PROTO_NEC = 9,
216 RC_PROTO_NECX = 10,
217 RC_PROTO_NEC32 = 11,
218 RC_PROTO_SANYO = 12,
219 RC_PROTO_MCIR2_KBD = 13,
220 RC_PROTO_MCIR2_MSE = 14,
221 RC_PROTO_RC6_0 = 15,
222 RC_PROTO_RC6_6A_20 = 16,
223 RC_PROTO_RC6_6A_24 = 17,
224 RC_PROTO_RC6_6A_32 = 18,
225 RC_PROTO_RC6_MCE = 19,
226 RC_PROTO_SHARP = 20,
227 RC_PROTO_XMP = 21,
228 RC_PROTO_CEC = 22,
229 RC_PROTO_IMON = 23,
230 RC_PROTO_RCMM12 = 24,
231 RC_PROTO_RCMM24 = 25,
232 RC_PROTO_RCMM32 = 26,
233 RC_PROTO_XBOX_DVD = 27,
234 RC_PROTO_MAX = RC_PROTO_XBOX_DVD,
235 };
236
237 #endif
238
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.