TOMOYO Linux Cross Reference
Linux/include/uapi/linux/nl80211.h

   #ifndef __LINUX_NL80211_H
   #define __LINUX_NL80211_H
   /*
    * 802.11 netlink interface public header
    *
    * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
    * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
    * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
    * Copyright 2008 Michael Buesch <m@bues.ch>
   * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
   * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
   * Copyright 2008 Colin McCabe <colin@cozybit.com>
   * Copyright 2015-2017  Intel Deutschland GmbH
   * Copyright (C) 2018-2024 Intel Corporation
   *
   * Permission to use, copy, modify, and/or distribute this software for any
   * purpose with or without fee is hereby granted, provided that the above
   * copyright notice and this permission notice appear in all copies.
   *
   * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
   * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
   * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
   * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
   * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
   *
   */
  
  /*
   * This header file defines the userspace API to the wireless stack. Please
   * be careful not to break things - i.e. don't move anything around or so
   * unless you can demonstrate that it breaks neither API nor ABI.
   *
   * Additions to the API should be accompanied by actual implementations in
   * an upstream driver, so that example implementations exist in case there
   * are ever concerns about the precise semantics of the API or changes are
   * needed, and to ensure that code for dead (no longer implemented) API
   * can actually be identified and removed.
   * Nonetheless, semantics should also be documented carefully in this file.
   */
  
  #include <linux/types.h>
  
  #define NL80211_GENL_NAME "nl80211"
  
  #define NL80211_MULTICAST_GROUP_CONFIG          "config"
  #define NL80211_MULTICAST_GROUP_SCAN            "scan"
  #define NL80211_MULTICAST_GROUP_REG             "regulatory"
  #define NL80211_MULTICAST_GROUP_MLME            "mlme"
  #define NL80211_MULTICAST_GROUP_VENDOR          "vendor"
  #define NL80211_MULTICAST_GROUP_NAN             "nan"
  #define NL80211_MULTICAST_GROUP_TESTMODE        "testmode"
  
  #define NL80211_EDMG_BW_CONFIG_MIN      4
  #define NL80211_EDMG_BW_CONFIG_MAX      15
  #define NL80211_EDMG_CHANNELS_MIN       1
  #define NL80211_EDMG_CHANNELS_MAX       0x3c /* 0b00111100 */
  
  /**
   * DOC: Station handling
   *
   * Stations are added per interface, but a special case exists with VLAN
   * interfaces. When a station is bound to an AP interface, it may be moved
   * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
   * The station is still assumed to belong to the AP interface it was added
   * to.
   *
   * Station handling varies per interface type and depending on the driver's
   * capabilities.
   *
   * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
   * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
   *  - a setup station entry is added, not yet authorized, without any rate
   *    or capability information; this just exists to avoid race conditions
   *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
   *    to add rate and capability information to the station and at the same
   *    time mark it authorized.
   *  - %NL80211_TDLS_ENABLE_LINK is then used
   *  - after this, the only valid operation is to remove it by tearing down
   *    the TDLS link (%NL80211_TDLS_DISABLE_LINK)
   *
   * TODO: need more info for other interface types
   */
  
  /**
   * DOC: Frame transmission/registration support
   *
   * Frame transmission and registration support exists to allow userspace
   * management entities such as wpa_supplicant to react to management frames
   * that are not being handled by the kernel. This includes, for example,
   * certain classes of action frames that cannot be handled in the kernel
   * for various reasons.
   *
   * Frame registration is done on a per-interface basis and registrations
   * cannot be removed other than by closing the socket. It is possible to
   * specify a registration filter to register, for example, only for a
   * certain type of action frame. In particular with action frames, those
   * that userspace registers for will not be returned as unhandled by the
  * driver, so that the registered application has to take responsibility
  * for doing that.
  *
  * The type of frame that can be registered for is also dependent on the
  * driver and interface type. The frame types are advertised in wiphy
  * attributes so applications know what to expect.
  *
  * NOTE: When an interface changes type while registrations are active,
  *       these registrations are ignored until the interface type is
  *       changed again. This means that changing the interface type can
  *       lead to a situation that couldn't otherwise be produced, but
  *       any such registrations will be dormant in the sense that they
  *       will not be serviced, i.e. they will not receive any frames.
  *
  * Frame transmission allows userspace to send for example the required
  * responses to action frames. It is subject to some sanity checking,
  * but many frames can be transmitted. When a frame is transmitted, its
  * status is indicated to the sending socket.
  *
  * For more technical details, see the corresponding command descriptions
  * below.
  */
 
 /**
  * DOC: Virtual interface / concurrency capabilities
  *
  * Some devices are able to operate with virtual MACs; they can have
  * more than one virtual interface. The capability handling for this
  * is a bit complex though, as there may be a number of restrictions
  * on the types of concurrency that are supported.
  *
  * To start with, each device supports the interface types listed in
  * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
  * types there no concurrency is implied.
  *
  * Once concurrency is desired, more attributes must be observed:
  * To start with, since some interface types are purely managed in
  * software, like the AP-VLAN type in mac80211 for example, there's
  * an additional list of these; they can be added at any time and
  * are only restricted by some semantic restrictions (e.g. AP-VLAN
  * cannot be added without a corresponding AP interface). This list
  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
  *
  * Further, the list of supported combinations is exported. This is
  * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
  * it exports a list of "groups", and at any point in time the
  * interfaces that are currently active must fall into any one of
  * the advertised groups. Within each group, there are restrictions
  * on the number of interfaces of different types that are supported
  * and also the number of different channels, along with potentially
  * some other restrictions. See &enum nl80211_if_combination_attrs.
  *
  * All together, these attributes define the concurrency of virtual
  * interfaces that a given device supports.
  */
 
 /**
  * DOC: packet coalesce support
  *
  * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
  * packets does not do anything with these packets. Therefore the
  * reception of these unwanted packets causes unnecessary processing
  * and power consumption.
  *
  * Packet coalesce feature helps to reduce number of received interrupts
  * to host by buffering these packets in firmware/hardware for some
  * predefined time. Received interrupt will be generated when one of the
  * following events occurs.
  * a) Expiration of hardware timer whose expiration time is set to maximum
  * coalescing delay of matching coalesce rule.
  * b) Coalescing buffer in hardware reaches its limit.
  * c) Packet doesn't match any of the configured coalesce rules.
  *
  * User needs to configure following parameters for creating a coalesce
  * rule.
  * a) Maximum coalescing delay
  * b) List of packet patterns which needs to be matched
  * c) Condition for coalescence: pattern 'match' or 'no match'
  * Multiple such rules can be created.
  */
 
 /**
  * DOC: WPA/WPA2 EAPOL handshake offload
  *
  * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
  * can indicate they support offloading EAPOL handshakes for WPA/WPA2
  * preshared key authentication in station mode. In %NL80211_CMD_CONNECT
  * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
  * supporting this offload may reject the %NL80211_CMD_CONNECT when no
  * preshared key material is provided, for example when that driver does
  * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
  *
  * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
  * set by drivers indicating offload support of the PTK/GTK EAPOL
  * handshakes during 802.1X authentication in station mode. In order to
  * use the offload the %NL80211_CMD_CONNECT should have
  * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
  * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
  * not present.
  *
  * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers
  * can indicate they support offloading EAPOL handshakes for WPA/WPA2
  * preshared key authentication in AP mode. In %NL80211_CMD_START_AP
  * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers
  * supporting this offload may reject the %NL80211_CMD_START_AP when no
  * preshared key material is provided, for example when that driver does
  * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.
  *
  * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
  * using %NL80211_CMD_SET_PMK. For offloaded FT support also
  * %NL80211_ATTR_PMKR0_NAME must be provided.
  */
 
 /**
  * DOC: FILS shared key authentication offload
  *
  * FILS shared key authentication offload can be advertised by drivers by
  * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
  * eventually do a key derivation as per IEEE 802.11ai. The below additional
  * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
  * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
  *      %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
  *      %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
  *      %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
  *      %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
  * rIK should be used to generate an authentication tag on the ERP message and
  * rMSK should be used to derive a PMKSA.
  * rIK, rMSK should be generated and keyname_nai, sequence number should be used
  * as specified in IETF RFC 6696.
  *
  * When FILS shared key authentication is completed, driver needs to provide the
  * below additional parameters to userspace, which can be either after setting
  * up a connection or after roaming.
  *      %NL80211_ATTR_FILS_KEK - used for key renewal
  *      %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
  *      %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
  *      %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
  * The PMKSA can be maintained in userspace persistently so that it can be used
  * later after reboots or wifi turn off/on also.
  *
  * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
  * capable AP supporting PMK caching. It specifies the scope within which the
  * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
  * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
  * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
  * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
  * use in a FILS shared key connection with PMKSA caching.
  */
 
 /**
  * DOC: SAE authentication offload
  *
  * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
  * support offloading SAE authentication for WPA3-Personal networks in station
  * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by
  * drivers indicating the offload support in AP mode.
  *
  * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in
  * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode
  * respectively.
  */
 
 /**
  * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
  *
  * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
  * support offloading VLAN functionality in a manner where the driver exposes a
  * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
  * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
  * case. Frames received from stations that are not assigned to any VLAN are
  * delivered on the main netdev and frames to such stations can be sent through
  * that main netdev.
  *
  * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
  * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
  * %NL80211_ATTR_VLAN_ID.
  */
 
 /**
  * DOC: TID configuration
  *
  * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
  * attribute given in wiphy capabilities.
  *
  * The necessary configuration parameters are mentioned in
  * &enum nl80211_tid_config_attr and it will be passed to the
  * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
  *
  * If the configuration needs to be applied for specific peer then the MAC
  * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
  * configuration will be applied for all the connected peers in the vif except
  * any peers that have peer-specific configuration for the TID by default; if
  * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
  * will be overwritten.
  *
  * All this configuration is valid only for STA's current connection,
  * i.e., the configuration will be reset to default when the STA connects back
  * after disconnection/roaming, and this configuration will be cleared when
  * the interface goes down.
  */
 
 /**
  * DOC: FILS shared key crypto offload
  *
  * This feature is applicable to drivers running in AP mode.
  *
  * FILS shared key crypto offload can be advertised by drivers by setting
  * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
  * FILS shared key crypto offload should be able to encrypt and decrypt
  * association frames for FILS shared key authentication as per IEEE 802.11ai.
  * With this capability, for FILS key derivation, drivers depend on userspace.
  *
  * After FILS key derivation, userspace shares the FILS AAD details with the
  * driver and the driver stores the same to use in decryption of association
  * request and in encryption of association response. The below parameters
  * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
  *      %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
  *      %NL80211_ATTR_FILS_KEK - Used for encryption or decryption
  *      %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
  *                      (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
  *
  * Once the association is done, the driver cleans the FILS AAD data.
  */
 
 /**
  * DOC: Multi-Link Operation
  *
  * In Multi-Link Operation, a connection between two MLDs utilizes multiple
  * links. To use this in nl80211, various commands and responses now need
  * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.
  * Additionally, various commands that need to operate on a specific link
  * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to
  * use %NL80211_CMD_START_AP or similar functions.
  */
 
 /**
  * DOC: OWE DH IE handling offload
  *
  * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate
  * kernel/application space to avoid DH IE handling. When this flag is
  * advertised, the driver/device will take care of DH IE inclusion and
  * processing of peer DH IE to generate PMK.
  */
 
 /**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
  *
  * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
  *      to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *      %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
  *      %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
  *      %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
  *      channel width; this is used for setting monitor mode channel),
  *      %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
  *      %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
  *      %NL80211_ATTR_WIPHY_RTS_THRESHOLD.  However, for setting the channel,
  *      see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
  *      compatibility only.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *      or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *      %NL80211_ATTR_WIPHY_NAME.
  * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
  *      %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
  *
  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
  *      either a dump request for all interfaces or a specific get with a
  *      single %NL80211_ATTR_IFINDEX is supported.
  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
  *      to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
  *      %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
  *      be sent from userspace to request creation of a new virtual interface,
  *      then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
  *      %NL80211_ATTR_IFNAME.
  * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
  *      userspace to request deletion of a virtual interface, then requires
  *      attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are
  *      enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS,
  *      and if this command is used for the transmitting interface, then all
  *      the non-transmitting interfaces are deleted as well.
  *
  * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
  *      by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC
  *      represents peer's MLD address for MLO pairwise key. For MLO group key,
  *      the link is identified by %NL80211_ATTR_MLO_LINK_ID.
  * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
  *      %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
  *      For MLO connection, the link to set default key is identified by
  *      %NL80211_ATTR_MLO_LINK_ID.
  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
  *      %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
  *      and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents
  *      peer's MLD address for MLO pairwise key. The link to add MLO
  *      group key is identified by %NL80211_ATTR_MLO_LINK_ID.
  * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
  *      or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address
  *      for MLO pairwise key. The link to delete group key is identified by
  *      %NL80211_ATTR_MLO_LINK_ID.
  *
  * @NL80211_CMD_GET_BEACON: (not used)
  * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
  *      using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
  *      attributes. For drivers that generate the beacon and probe responses
  *      internally, the following attributes must be provided: %NL80211_ATTR_IE,
  *      %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
  * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
  *      are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
  *      do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
  *      %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
  *      %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
  *      %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *      %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
  *      %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
  *      %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *      The channel to use can be set on the interface or be given using the
  *      %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
  *      attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
  * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
  * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
  *
  * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
  *      %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
  *      %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
  *      interface identified by %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
  *      or, if no MAC address given, all stations, on the interface identified
  *      by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in
  *      %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and
  *      %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
  *      of disconnection indication should be sent to the station
  *      (Deauthentication or Disassociation frame and reason code for that
  *      frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
  *      stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
  *      destination %NL80211_ATTR_MAC on the interface identified by
  *      %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
  *      destination %NL80211_ATTR_MAC on the interface identified by
  *      %NL80211_ATTR_IFINDEX.
  * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
  *      %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
  * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
  *      %NL80211_ATTR_MAC.
  * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
  *      %NL80211_ATTR_IFINDEX.
  *
  * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
  *      regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
  *      has a private regulatory domain, it will be returned. Otherwise, the
  *      global regdomain will be returned.
  *      A device will have a private regulatory domain if it uses the
  *      regulatory_hint() API. Even when a private regdomain is used the channel
  *      information will still be mended according to further hints from
  *      the regulatory core to help with compliance. A dump version of this API
  *      is now available which will returns the global regdomain as well as
  *      all private regdomains of present wiphys (for those that have it).
  *      If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
  *      its private regdomain is the only valid one for it. The regulatory
  *      core is not used to help with compliance in this case.
  * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
  *      after being queried by the kernel. CRDA replies by sending a regulatory
  *      domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
  *      current alpha2 if it found a match. It also provides
  *      NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
  *      regulatory rule is a nested set of attributes  given by
  *      %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
  *      %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
  *      %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
  *      %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
  * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
  *      to the specified ISO/IEC 3166-1 alpha2 country code. The core will
  *      store this as a valid request and then query userspace for it.
  *
  * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
  *      interface identified by %NL80211_ATTR_IFINDEX
  *
  * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
  *      interface identified by %NL80211_ATTR_IFINDEX
  *
  * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
  *      interface is identified with %NL80211_ATTR_IFINDEX and the management
  *      frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
  *      added to the end of the specified management frame is specified with
  *      %NL80211_ATTR_IE. If the command succeeds, the requested data will be
  *      added to all specified management frames generated by
  *      kernel/firmware/driver.
  *      Note: This command has been removed and it is only reserved at this
  *      point to avoid re-using existing command number. The functionality this
  *      command was planned for has been provided with cleaner design with the
  *      option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
  *      NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
  *      NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
  *
  * @NL80211_CMD_GET_SCAN: get scan results
  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
  *      %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
  *      probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to
  *      specify a BSSID to scan for; if not included, the wildcard BSSID will
  *      be used.
  * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
  *      NL80211_CMD_GET_SCAN and on the "scan" multicast group)
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *      partial scan results may be available
  *
  * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
  *      intervals and certain number of cycles, as specified by
  *      %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
  *      not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
  *      scheduled scan will run in an infinite loop with the specified interval.
  *      These attributes are mutually exclusive,
  *      i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
  *      NL80211_ATTR_SCHED_SCAN_PLANS is defined.
  *      If for some reason scheduled scan is aborted by the driver, all scan
  *      plans are canceled (including scan plans that did not start yet).
  *      Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
  *      are passed, they are used in the probe requests.  For
  *      broadcast, a broadcast SSID must be passed (ie. an empty
  *      string).  If no SSID is passed, no probe requests are sent and
  *      a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
  *      if passed, define which channels should be scanned; if not
  *      passed, all channels allowed for the current regulatory domain
  *      are used.  Extra IEs can also be passed from the userspace by
  *      using the %NL80211_ATTR_IE attribute.  The first cycle of the
  *      scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
  *      is supplied. If the device supports multiple concurrent scheduled
  *      scans, it will allow such when the caller provides the flag attribute
  *      %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
  *      scheduled scan is not running. The caller may assume that as soon
  *      as the call returns, it is safe to start a new scheduled scan again.
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *      results available.
  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
  *      stopped.  The driver may issue this event at any time during a
  *      scheduled scan.  One reason for stopping the scan is if the hardware
  *      does not support starting an association or a normal scan while running
  *      a scheduled scan.  This event is also sent when the
  *      %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
  *      is brought down while a scheduled scan was running.
  *
  * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *      NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
  *
  * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
  *      (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
  *      (PMK is used for PTKSA derivation in case of FILS shared key offload) or
  *      using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
  *      %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
  *      authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
  *      advertised by a FILS capable AP identifying the scope of PMKSA in an
  *      ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
  *      (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
  *      %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
  *      authentication. Additionally in case of SAE offload and OWE offloads
  *      PMKSA entry can be deleted using %NL80211_ATTR_SSID.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  *      has been changed and provides details of the request information
  *      that caused the change such as who initiated the regulatory request
  *      (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
  *      (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
  *      the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
  *      %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
  *      set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
  *      %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
  *      to (%NL80211_ATTR_REG_ALPHA2).
  * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
  *      has been found while world roaming thus enabling active scan or
  *      any mode of operation that initiates TX (beacons) on a channel
  *      where we would not have been able to do either before. As an example
  *      if you are world roaming (regulatory domain set to world or if your
  *      driver is using a custom world roaming regulatory domain) and while
  *      doing a passive scan on the 5 GHz band you find an AP there (if not
  *      on a DFS channel) you will now be able to actively scan for that AP
  *      or use AP mode on your card on that same channel. Note that this will
  *      never be used for channels 1-11 on the 2 GHz band as they are always
  *      enabled world wide. This beacon hint is only sent if your device had
  *      either disabled active scanning or beaconing on a channel. We send to
  *      userspace the wiphy on which we removed a restriction from
  *      (%NL80211_ATTR_WIPHY) and the channel on which this occurred
  *      before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
  *      the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *      This command is used both as a command (request to authenticate) and
  *      as an event on the "mlme" multicast group indicating completion of the
  *      authentication process.
  *      When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
  *      interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
  *      BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *      the SSID (mainly for association, but is included in authentication
  *      request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
  *      %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
  *      channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
  *      authentication type. %NL80211_ATTR_IE is used to define IEs
  *      (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
  *      to the frame.
  *      When used as an event, this reports reception of an Authentication
  *      frame in station and IBSS modes when the local MLME processed the
  *      frame, i.e., it was for the local STA and was received in correct
  *      state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
  *      MLME SAP interface (kernel providing MLME, userspace SME). The
  *      included %NL80211_ATTR_FRAME attribute contains the management frame
  *      (including both the header and frame body, but not FCS). This event is
  *      also used to indicate if the authentication attempt timed out. In that
  *      case the %NL80211_ATTR_FRAME attribute is replaced with a
  *      %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
  *      pending authentication timed out).
  * @NL80211_CMD_ASSOCIATE: association request and notification; like
  *      NL80211_CMD_AUTHENTICATE but for Association and Reassociation
  *      (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
  *      MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The
  *      %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
  *      request is for the initial association to an ESS (that attribute not
  *      included) or for reassociation within the ESS (that attribute is
  *      included).
  * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
  *      NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
  *      MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
  *      primitives).
  * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
  *      NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
  *      MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
  *
  * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
  *      MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
  *      event includes %NL80211_ATTR_MAC to describe the source MAC address of
  *      the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
  *      type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
  *      %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
  *      event matches with MLME-MICHAELMICFAILURE.indication() primitive
  *
  * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
  *      FREQ attribute (for the initial frequency if no peer can be found)
  *      and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
  *      should be fixed rather than automatically determined. Can only be
  *      executed on a network interface that is UP, and fixed BSSID/FREQ
  *      may be rejected. Another optional parameter is the beacon interval,
  *      given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
  *      given defaults to 100 TU (102.4ms).
  * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
  *      determined by the network interface.
  *
  * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
  *      to identify the device, and the TESTDATA blob attribute to pass through
  *      to the driver.
  *
  * @NL80211_CMD_CONNECT: connection request and notification; this command
  *      requests to connect to a specified network but without separating
  *      auth and assoc steps. For this, you need to specify the SSID in a
  *      %NL80211_ATTR_SSID attribute, and can optionally specify the association
  *      IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
  *      %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
  *      %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
  *      %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
  *      %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
  *      %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
  *      %NL80211_ATTR_WIPHY_FREQ_HINT.
  *      If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
  *      restrictions on BSS selection, i.e., they effectively prevent roaming
  *      within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
  *      can be included to provide a recommendation of the initial BSS while
  *      allowing the driver to roam to other BSSes within the ESS and also to
  *      ignore this recommendation if the indicated BSS is not ideal. Only one
  *      set of BSSID,frequency parameters is used (i.e., either the enforcing
  *      %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
  *      %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
  *      Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
  *      %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
  *      included, these IEs through %NL80211_ATTR_IE are specified by the user
  *      space based on the best possible BSS selected. Thus, if the driver ends
  *      up selecting a different BSS, it can modify these IEs accordingly (e.g.
  *      userspace asks the driver to perform PMKSA caching with BSS1 and the
  *      driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
  *      has to get updated with the apt PMKID).
  *      %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
  *      the ESS in case the device is already associated and an association with
  *      a different BSS is desired.
  *      Background scan period can optionally be
  *      specified in %NL80211_ATTR_BG_SCAN_PERIOD,
  *      if not specified default background scan configuration
  *      in driver is used and if period value is 0, bg scan will be disabled.
  *      This attribute is ignored if driver does not support roam scan.
  *      It is also sent as an event, with the BSSID and response IEs when the
  *      connection is established or failed to be established. This can be
  *      determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
  *      non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
  *      event, the connection attempt failed due to not being able to initiate
  *      authentication/association or not receiving a response from the AP.
  *      Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
  *      well to remain backwards compatible.
  * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
  *      When a security association was established on an 802.1X network using
  *      fast transition, this event should be followed by an
  *      %NL80211_CMD_PORT_AUTHORIZED event.
  *      Following a %NL80211_CMD_ROAM event userspace can issue
  *      %NL80211_CMD_GET_SCAN in order to obtain the scan information for the
  *      new BSS the card/driver roamed to.
  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
  *      userspace that a connection was dropped by the AP or due to other
  *      reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
  *      %NL80211_ATTR_REASON_CODE attributes are used.
  *
  * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
  *      associated with this wiphy must be down and will follow.
  *
  * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
  *      channel for the specified amount of time. This can be used to do
  *      off-channel operations like transmit a Public Action frame and wait for
  *      a response while being associated to an AP on another channel.
  *      %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
  *      radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
  *      frequency for the operation.
  *      %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
  *      to remain on the channel. This command is also used as an event to
  *      notify when the requested duration starts (it may take a while for the
  *      driver to schedule this time due to other concurrent needs for the
  *      radio).
  *      When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
  *      that will be included with any events pertaining to this request;
  *      the cookie is also used to cancel the request.
  * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
  *      pending remain-on-channel duration if the desired operation has been
  *      completed prior to expiration of the originally requested duration.
  *      %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
  *      radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
  *      uniquely identify the request.
  *      This command is also used as an event to notify when a requested
  *      remain-on-channel duration has expired.
  *
  * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
  *      rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
  *      and @NL80211_ATTR_TX_RATES the set of allowed rates.
  *
  * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
  *      (via @NL80211_CMD_FRAME) for processing in userspace. This command
  *      requires an interface index, a frame type attribute (optional for
  *      backward compatibility reasons, if not given assumes action frames)
  *      and a match attribute containing the first few bytes of the frame
  *      that should match, e.g. a single byte for only a category match or
  *      four bytes for vendor frames including the OUI. The registration
  *      cannot be dropped, but is removed automatically when the netlink
  *      socket is closed. Multiple registrations can be made.
  *      The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
  *      %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
  *      case the registration can also be modified to include/exclude the
  *      flag, rather than requiring unregistration to change it.
  * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
  *      backward compatibility
  * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
  *      command is used both as a request to transmit a management frame and
  *      as an event indicating reception of a frame that was not processed in
  *      kernel code, but is for us (i.e., which may need to be processed in a
  *      user space application). %NL80211_ATTR_FRAME is used to specify the
  *      frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used
  *      to indicate on which channel the frame is to be transmitted or was
  *      received. If this channel is not the current channel (remain-on-channel
  *      or the operational channel) the device will switch to the given channel
  *      and transmit the frame, optionally waiting for a response for the time
  *      specified using %NL80211_ATTR_DURATION. When called, this operation
  *      returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
  *      TX status event pertaining to the TX request.
  *      %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
  *      management frames at CCK rate or not in 2GHz band.
  *      %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
  *      counters which will be updated to the current value. This attribute
  *      is used during CSA period.
  *      For TX on an MLD, the frequency can be omitted and the link ID be
  *      specified, or if transmitting to a known peer MLD (with MLD addresses
  *      in the frame) both can be omitted and the link will be selected by
  *      lower layers.
  *      For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to
  *      indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may
  *      be included to indicate the ack TX timestamp.
  * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
  *      command may be used with the corresponding cookie to cancel the wait
  *      time if it is known that it is no longer necessary.  This command is
  *      also sent as an event whenever the driver has completed the off-channel
  *      wait time.
  * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
  * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
  *      transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
  *      the TX command and %NL80211_ATTR_FRAME includes the contents of the
  *      frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
  *      the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the
  *      tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to
  *      indicate the ack RX timestamp.
  * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
  *      backward compatibility.
  *
  * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
  * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
  *
  * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
  *      is used to configure connection quality monitoring notification trigger
  *      levels.
  * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
  *      command is used as an event to indicate the that a trigger level was
  *      reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
  *      and the attributes determining channel width) the given interface
  *      (identified by %NL80211_ATTR_IFINDEX) shall operate on.
  *      In case multiple channels are supported by the device, the mechanism
  *      with which it switches channels is implementation-defined.
  *      When a monitor interface is given, it can only switch channel while
  *      no other interfaces are operating to avoid disturbing the operation
  *      of any other interfaces, and other interfaces will again take
  *      precedence when they are used.
  *
  * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
  *      (no longer supported).
  *
  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
  *      multicast to unicast conversion. When enabled, all multicast packets
  *      with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)
  *      will be sent out to each station once with the destination (multicast)
  *      MAC address replaced by the station's MAC address. Note that this may
  *      break certain expectations of the receiver, e.g. the ability to drop
  *      unicast IP packets encapsulated in multicast L2 frames, or the ability
  *      to not send destination unreachable messages in such cases.
  *      This can only be toggled per BSS. Configure this on an interface of
  *      type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces
  *      (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.
  *      If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this
  *      command, the feature is disabled.
  *
  * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
  *      mesh config parameters may be given.
  * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
  *      network is determined by the network interface.
  *
  * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
  *      notification. This event is used to indicate that an unprotected
  *      deauthentication frame was dropped when MFP is in use.
  * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
  *      notification. This event is used to indicate that an unprotected
  *      disassociation frame was dropped when MFP is in use.
  *
  * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
  *      beacon or probe response from a compatible mesh peer.  This is only
  *      sent while no station information (sta_info) exists for the new peer
  *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
  *      @NL80211_MESH_SETUP_USERSPACE_AMPE, or
  *      @NL80211_MESH_SETUP_USERSPACE_MPM is set.  On reception of this
  *      notification, userspace may decide to create a new station
  *      (@NL80211_CMD_NEW_STATION).  To stop this notification from
  *      reoccurring, the userspace authentication daemon may want to create the
  *      new station with the AUTHENTICATED flag unset and maybe change it later
  *      depending on the authentication result.
  *
  * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
  * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
  *      Since wireless is more complex than wired ethernet, it supports
  *      various triggers. These triggers can be configured through this
  *      command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
  *      more background information, see
  *      https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.
  *      The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
  *      from the driver reporting the wakeup reason. In this case, the
  *      @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
  *      for the wakeup, if it was caused by wireless. If it is not present
  *      in the wakeup notification, the wireless device didn't cause the
  *      wakeup but reports that it was woken up.
  *
  * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
  *      the necessary information for supporting GTK rekey offload. This
  *      feature is typically used during WoWLAN. The configuration data
  *      is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
  *      contains the data in sub-attributes). After rekeying happened,
  *      this command may also be sent by the driver as an MLME event to
  *      inform userspace of the new replay counter.
  *
  * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
  *      of PMKSA caching candidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  *      In addition, this can be used as an event to request userspace to take
  *      actions on TDLS links (set up a new link or tear down an existing one).
  *      In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested
  *      operation, %NL80211_ATTR_MAC contains the peer MAC address, and
  *      %NL80211_ATTR_REASON_CODE the reason code to be used (only with
  *      %NL80211_TDLS_TEARDOWN).
  * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The
  *      %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
  *      sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as
  *      802.11 management frames, while TDLS action codes (802.11-2012
  *      8.5.13.1) will be encapsulated and sent as data frames. The currently
  *      supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES
  *      and the currently supported TDLS actions codes are given in
  *      &enum ieee80211_tdls_actioncode.
  *
  * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
  *      (or GO) interface (i.e. hostapd) to ask for unexpected frames to
  *      implement sending deauth to stations that send unexpected class 3
  *      frames. Also used as the event sent by the kernel when such a frame
  *      is received.
  *      For the event, the %NL80211_ATTR_MAC attribute carries the TA and
  *      other attributes like the interface index are present.
  *      If used as the command it must have an interface index and you can
  *      only unsubscribe from the event by closing the socket. Subscription
  *      is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
  *
  * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
  *      associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
  *      and wasn't already in a 4-addr VLAN. The event will be sent similarly
  *      to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
  *
  * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
  *      by sending a null data frame to it and reporting when the frame is
  *      acknowledged. This is used to allow timing out inactive clients. Uses
  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
  *      direct reply with an %NL80211_ATTR_COOKIE that is later used to match
  *      up the event with the request. The event includes the same data and
  *      has %NL80211_ATTR_ACK set if the frame was ACKed.
  *
  * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
  *      other BSSes when any interfaces are in AP mode. This helps implement
  *      OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
  *      messages. Note that per PHY only one application may register.
  *
  * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
  *      No Acknowledgement Policy should be applied.
  *
  * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
  *      independently of the userspace SME, send this event indicating
  *      %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
  *      attributes determining channel width.  This indication may also be
  *      sent when a remotely-initiated switch (e.g., when a STA receives a CSA
  *      from the remote AP) is completed;
  *
  * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
  *      has been started on an interface, regardless of the initiator
  *      (ie. whether it was requested from a remote device or
  *      initiated on our own).  It indicates that
  *      %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
  *      after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's.  The userspace may
  *      decide to react to this indication by requesting other
  *      interfaces to change channel as well.
  *
  * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
  *      its %NL80211_ATTR_WDEV identifier. It must have been created with
  *      %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
  *      P2P Device can be used for P2P operations, e.g. remain-on-channel and
  *      public action frame TX.
  * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
  *      its %NL80211_ATTR_WDEV identifier.
  *
  * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
  *      notify userspace that AP has rejected the connection request from a
  *      station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
  *      is used for this.
  *
  * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
  *      for IBSS or MESH vif.
  *
  * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
  *      This is to be used with the drivers advertising the support of MAC
  *      address based access control. List of MAC addresses is passed in
  *      %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
  *      %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
  *      is not already done. The new list will replace any existing list. Driver
  *      will clear its ACL when the list of MAC addresses passed is empty. This
  *      command is used in AP/P2P GO mode. Driver has to make sure to clear its
  *      ACL list during %NL80211_CMD_STOP_AP.
  *
  * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
  *      a radar is detected or the channel availability scan (CAC) has finished
  *      or was aborted, or a radar was detected, usermode will be notified with
  *      this event. This command is also used to notify userspace about radars
  *      while operating on this channel.
  *      %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
  *      event.
  *
  * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
  *      i.e. features for the nl80211 protocol rather than device features.
  *      Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
  *
  * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
  *      Information Element to the WLAN driver
  *
  * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
  *      to the supplicant. This will carry the target AP's MAC address along
  *      with the relevant Information Elements. This event is used to report
  *      received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
  *
  * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running
  *      a critical protocol that needs more reliability in the connection to
  *      complete.
  *
  * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
  *      return back to normal.
  *
  * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
  * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
  *
  * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
  *      new channel information (Channel Switch Announcement - CSA)
  *      in the beacon for some time (as defined in the
  *      %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
  *      new channel. Userspace provides the new channel information (using
  *      %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
  *      width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
  *      other station that transmission must be blocked until the channel
  *      switch is complete.
  *
  * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified
  *      by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
  *      %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in
  *      %NL80211_ATTR_VENDOR_DATA.
  *      For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
  *      used in the wiphy data as a nested attribute containing descriptions
  *      (&struct nl80211_vendor_cmd_info) of the supported vendor commands.
  *      This may also be sent as an event with the same attributes.
  *
  * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.
  *      The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If
  *      that attribute is not included, QoS mapping is disabled. Since this
  *      QoS mapping is relevant for IP packets, it is only valid during an
  *      association. This is cleared on disassociation and AP restart.
  *
  * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given
  *      %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO
  *      and %NL80211_ATTR_ADMITTED_TIME parameters.
  *      Note that the action frame handshake with the AP shall be handled by
  *      userspace via the normal management RX/TX framework, this only sets
  *      up the TX TS in the driver/device.
  *      If the admitted time attribute is not added then the request just checks
  *      if a subsequent setup could be successful, the intent is to use this to
  *      avoid setting up a session with the AP when local restrictions would
  *      make that impossible. However, the subsequent "real" setup may still
  *      fail even if the check was successful.
  * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID
  *      and %NL80211_ATTR_MAC parameters. It isn't necessary to call this
  *      before removing a station entry entirely, or before disassociating
  *      or similar, cleanup will happen in the driver/device in this case.
  *
  * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
  *      destination %NL80211_ATTR_MAC on the interface identified by
  *      %NL80211_ATTR_IFINDEX.
  *
  * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
  *      bandwidth of a channel must be given.
  * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
  *      network is determined by the network interface.
  *
  * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
  *      identified by the %NL80211_ATTR_MAC parameter. A target channel is
  *      provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
  *      channel width/type. The target operating class is given via
  *      %NL80211_ATTR_OPER_CLASS.
  *      The driver is responsible for continually initiating channel-switching
  *      operations and returning to the base channel for communication with the
  *      AP.
  * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
  *      peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
  *      when this command completes.
  *
  * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
  *      as an event to indicate changes for devices with wiphy-specific regdom
  *      management.
  *
  * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is
  *      not running. The driver indicates the status of the scan through
  *      cfg80211_scan_done().
  *
  * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
  *      %NL80211_ATTR_WDEV interface. This interface must have been
  *      previously created with %NL80211_CMD_NEW_INTERFACE. After it
  *      has been started, the NAN interface will create or join a
  *      cluster. This command must have a valid
  *      %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
  *      %NL80211_ATTR_BANDS attributes.  If %NL80211_ATTR_BANDS is
  *      omitted or set to 0, it means don't-care and the device will
  *      decide what to use.  After this command NAN functions can be
  *      added.
  * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
  *      its %NL80211_ATTR_WDEV interface.
  * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
  *      with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
  *      operation returns the strictly positive and unique instance id
  *      (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
  *      of the function upon success.
  *      Since instance ID's can be re-used, this cookie is the right
  *      way to identify the function. This will avoid races when a termination
  *      event is handled by the user space after it has already added a new
  *      function that got the same instance id from the kernel as the one
  *      which just terminated.
  *      This cookie may be used in NAN events even before the command
  *      returns, so userspace shouldn't process NAN events until it processes
  *      the response to this command.
  *      Look at %NL80211_ATTR_SOCKET_OWNER as well.
  * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
  *      This command is also used as a notification sent when a NAN function is
  *      terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
  *      and %NL80211_ATTR_COOKIE attributes.
  * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
  *      configuration. NAN must be operational (%NL80211_CMD_START_NAN
  *      was executed).  It must contain at least one of the following
  *      attributes: %NL80211_ATTR_NAN_MASTER_PREF,
  *      %NL80211_ATTR_BANDS.  If %NL80211_ATTR_BANDS is omitted, the
  *      current configuration is not changed.  If it is present but
  *      set to zero, the configuration is changed to don't-care
  *      (i.e. the device can decide what to do).
  * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.
  *      This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
  *      %NL80211_ATTR_COOKIE.
  *
  * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters
  *      for subsequent roaming cases if the driver or firmware uses internal
  *      BSS selection. This command can be issued only while connected and it
  *      does not result in a change for the current association. Currently,
  *      only the %NL80211_ATTR_IE data is used and updated with this command.
  *
  * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
  *      for the given authenticator address (specified with %NL80211_ATTR_MAC).
  *      When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
  *      PMK-R0, otherwise it specifies the PMK.
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *      configured PMK for the authenticator address identified by
  *      %NL80211_ATTR_MAC.
  * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
  *      open for regular data traffic. For STA/P2P-client, this event is sent
  *      with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
  *      client MAC address.
  *      Drivers that support 4 way handshake offload should send this event for
  *      STA/P2P-client after successful 4-way HS or after 802.1X FT following
  *      NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
  *      handshake offload should send this event on successful completion of
  *      4-way handshake with the peer (STA/P2P-client).
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *      and RX notification.  This command is used both as a request to transmit
  *      a control port frame and as a notification that a control port frame
  *      has been received. %NL80211_ATTR_FRAME is used to specify the
  *      frame contents.  The frame is the raw EAPoL data, without ethernet or
  *      802.11 headers.
  *      For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and
  *      its effect will depend on the destination: If the destination is known
  *      to be an MLD, this will be used as a hint to select the link to transmit
  *      the frame on. If the destination is not an MLD, this will select both
  *      the link to transmit on and the source address will be set to the link
  *      address of that link.
  *      When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
  *      %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added
  *      indicating the protocol type of the received frame; whether the frame
  *      was received unencrypted and the MAC address of the peer respectively.
  *
  * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
  *
  * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
  *      drivers that do not define separate commands for authentication and
  *      association, but rely on user space for the authentication to happen.
  *      This interface acts both as the event request (driver to user space)
  *      to trigger the authentication and command response (userspace to
  *      driver) to indicate the authentication status.
  *
  *      User space uses the %NL80211_CMD_CONNECT command to the host driver to
  *      trigger a connection. The host driver selects a BSS and further uses
  *      this interface to offload only the authentication part to the user
  *      space. Authentication frames are passed between the driver and user
  *      space through the %NL80211_CMD_FRAME interface. Host driver proceeds
  *      further with the association after getting successful authentication
  *      status. User space indicates the authentication status through
  *      %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
  *      command interface.
  *
  *      Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in
  *      %NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO
  *      during the authentication offload in STA mode while connecting to MLD
  *      APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability
  *      in %NL80211_CMD_CONNECT to know whether the user space supports enabling
  *      MLO during the authentication offload or not.
  *      User space should enable MLO during the authentication only when it
  *      receives the AP MLD address in authentication offload request. User
  *      space shouldn't enable MLO when the authentication offload request
  *      doesn't indicate the AP MLD address even if the AP is MLO capable.
  *      User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and
  *      interface address identified by %NL80211_ATTR_IFINDEX as self MLD
  *      address. User space and host driver to use MLD addresses in RA, TA and
  *      BSSID fields of the frames between them, and host driver translates the
  *      MLD addresses to/from link addresses based on the link chosen for the
  *      authentication.
  *
  *      Host driver reports this status on an authentication failure to the
  *      user space through the connect result as the user space would have
  *      initiated the connection through the connect request.
  *
  * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
  *      ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
  *      %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
  *      address(specified in %NL80211_ATTR_MAC).
  *
  * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in
  *      the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
  *
  * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s)
  *      with the given parameters, which are encapsulated in the nested
  *      %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
  *      randomization may be enabled and configured by specifying the
  *      %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.
  *      If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
  *      A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in
  *      the netlink extended ack message.
  *
  *      To cancel a measurement, close the socket that requested it.
  *
  *      Measurement results are reported to the socket that requested the
  *      measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they
  *      become available, so applications must ensure a large enough socket
  *      buffer size.
  *
  *      Depending on driver support it may or may not be possible to start
  *      multiple concurrent measurements.
  * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the
  *      result notification from the driver to the requesting socket.
  * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that
  *      the measurement completed, using the measurement cookie
  *      (%NL80211_ATTR_COOKIE).
  *
  * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was
  *      detected and reported by a neighboring device on the channel
  *      indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
  *      determining the width and type.
  *
  * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
  *      offload OWE processing to user space. This intends to support
  *      OWE AKM by the host drivers that implement SME but rely
  *      on the user space for the cryptographic/DH IE processing in AP mode.
  *
  * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
  *      refreshing, is that from one mesh point we be able to send some data
  *      frames to other mesh points which are not currently selected as a
  *      primary traffic path, but which are only 1 hop away. The absence of
  *      the primary path to the chosen node makes it necessary to apply some
  *      form of marking on a chosen packet stream so that the packets can be
  *      properly steered to the selected node for testing, and not by the
  *      regular mesh path lookup. Further, the packets must be of type data
  *      so that the rate control (often embedded in firmware) is used for
  *      rate selection.
  *
  *      Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
  *      peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
  *      content. The frame is ethernet data.
  *
  * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
  *      is passed using %NL80211_ATTR_TID_CONFIG attribute.
  *
  * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
  *      frame. This event is used to indicate that a received Beacon frame was
  *      dropped because it did not include a valid MME MIC while beacon
  *      protection was enabled (BIGTK configured in station mode).
  *
  * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
  *      port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
  *      %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
  *      includes the contents of the frame. %NL80211_ATTR_ACK flag is included
  *      if the recipient acknowledged the frame.
  *
  * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
  *      passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
  *      specify the wiphy index to be applied to.
  *
  * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever
  *      mac80211/drv detects a bss color collision.
  *
  * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that
  *      userspace wants to change the BSS color.
  *
  * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has
  *      started
  *
  * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has
  *      been aborted
  *
  * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
  *      has completed
  *
  * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
  *      &NL80211_ATTR_MAC - for STA MAC address
  *      &NL80211_ATTR_FILS_KEK - for KEK
  *      &NL80211_ATTR_FILS_NONCES - for FILS Nonces
  *              (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
  *
  * @NL80211_CMD_ASSOC_COMEBACK: notification about an association
  *      temporal rejection with comeback. The event includes %NL80211_ATTR_MAC
  *      to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to
  *      specify the timeout value.
  *
  * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The
  *      %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link.
  * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come
  *      without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links
  *      in preparation for e.g. roaming to a regular (non-MLO) AP.
  *
  * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station
  * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station
  * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station
  *
  * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing
  *      measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC
  *      is included, enable/disable HW timestamping only for frames to/from the
  *      specified MAC address. Otherwise enable/disable HW timestamping for
  *      all TM/FTM frames (including ones that were enabled with specific MAC
  *      address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable
  *      HW timestamping.
  *      The number of peers that HW timestamping can be enabled for concurrently
  *      is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.
  *
  * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD
  *      setup links due to AP MLD removing the corresponding affiliated APs with
  *      Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
  *      information about the removed STA MLD setup links.
  *
  * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
  *      non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
  *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
  *      TID to Link mapping for downlink/uplink traffic.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
 enum nl80211_commands {
 /* don't change the order or add anything between, this is ABI! */
         NL80211_CMD_UNSPEC,
 
         NL80211_CMD_GET_WIPHY,          /* can dump */
         NL80211_CMD_SET_WIPHY,
         NL80211_CMD_NEW_WIPHY,
         NL80211_CMD_DEL_WIPHY,
 
         NL80211_CMD_GET_INTERFACE,      /* can dump */
         NL80211_CMD_SET_INTERFACE,
         NL80211_CMD_NEW_INTERFACE,
         NL80211_CMD_DEL_INTERFACE,
 
         NL80211_CMD_GET_KEY,
         NL80211_CMD_SET_KEY,
         NL80211_CMD_NEW_KEY,
         NL80211_CMD_DEL_KEY,
 
         NL80211_CMD_GET_BEACON,
         NL80211_CMD_SET_BEACON,
         NL80211_CMD_START_AP,
         NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
         NL80211_CMD_STOP_AP,
         NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
 
         NL80211_CMD_GET_STATION,
         NL80211_CMD_SET_STATION,
         NL80211_CMD_NEW_STATION,
         NL80211_CMD_DEL_STATION,
 
         NL80211_CMD_GET_MPATH,
         NL80211_CMD_SET_MPATH,
         NL80211_CMD_NEW_MPATH,
         NL80211_CMD_DEL_MPATH,
 
         NL80211_CMD_SET_BSS,
 
         NL80211_CMD_SET_REG,
         NL80211_CMD_REQ_SET_REG,
 
         NL80211_CMD_GET_MESH_CONFIG,
         NL80211_CMD_SET_MESH_CONFIG,
 
         NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
 
         NL80211_CMD_GET_REG,
 
         NL80211_CMD_GET_SCAN,
         NL80211_CMD_TRIGGER_SCAN,
         NL80211_CMD_NEW_SCAN_RESULTS,
         NL80211_CMD_SCAN_ABORTED,
 
         NL80211_CMD_REG_CHANGE,
 
         NL80211_CMD_AUTHENTICATE,
         NL80211_CMD_ASSOCIATE,
         NL80211_CMD_DEAUTHENTICATE,
         NL80211_CMD_DISASSOCIATE,
 
         NL80211_CMD_MICHAEL_MIC_FAILURE,
 
         NL80211_CMD_REG_BEACON_HINT,
 
         NL80211_CMD_JOIN_IBSS,
         NL80211_CMD_LEAVE_IBSS,
 
         NL80211_CMD_TESTMODE,
 
         NL80211_CMD_CONNECT,
         NL80211_CMD_ROAM,
         NL80211_CMD_DISCONNECT,
 
         NL80211_CMD_SET_WIPHY_NETNS,
 
         NL80211_CMD_GET_SURVEY,
         NL80211_CMD_NEW_SURVEY_RESULTS,
 
         NL80211_CMD_SET_PMKSA,
         NL80211_CMD_DEL_PMKSA,
         NL80211_CMD_FLUSH_PMKSA,
 
         NL80211_CMD_REMAIN_ON_CHANNEL,
         NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
 
         NL80211_CMD_SET_TX_BITRATE_MASK,
 
         NL80211_CMD_REGISTER_FRAME,
         NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
         NL80211_CMD_FRAME,
         NL80211_CMD_ACTION = NL80211_CMD_FRAME,
         NL80211_CMD_FRAME_TX_STATUS,
         NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
 
         NL80211_CMD_SET_POWER_SAVE,
         NL80211_CMD_GET_POWER_SAVE,
 
         NL80211_CMD_SET_CQM,
         NL80211_CMD_NOTIFY_CQM,
 
         NL80211_CMD_SET_CHANNEL,
         NL80211_CMD_SET_WDS_PEER,
 
         NL80211_CMD_FRAME_WAIT_CANCEL,
 
         NL80211_CMD_JOIN_MESH,
         NL80211_CMD_LEAVE_MESH,
 
         NL80211_CMD_UNPROT_DEAUTHENTICATE,
         NL80211_CMD_UNPROT_DISASSOCIATE,
 
         NL80211_CMD_NEW_PEER_CANDIDATE,
 
         NL80211_CMD_GET_WOWLAN,
         NL80211_CMD_SET_WOWLAN,
 
         NL80211_CMD_START_SCHED_SCAN,
         NL80211_CMD_STOP_SCHED_SCAN,
         NL80211_CMD_SCHED_SCAN_RESULTS,
         NL80211_CMD_SCHED_SCAN_STOPPED,
 
         NL80211_CMD_SET_REKEY_OFFLOAD,
 
         NL80211_CMD_PMKSA_CANDIDATE,
 
         NL80211_CMD_TDLS_OPER,
         NL80211_CMD_TDLS_MGMT,
 
         NL80211_CMD_UNEXPECTED_FRAME,
 
         NL80211_CMD_PROBE_CLIENT,
 
         NL80211_CMD_REGISTER_BEACONS,
 
         NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
 
         NL80211_CMD_SET_NOACK_MAP,
 
         NL80211_CMD_CH_SWITCH_NOTIFY,
 
         NL80211_CMD_START_P2P_DEVICE,
         NL80211_CMD_STOP_P2P_DEVICE,
 
         NL80211_CMD_CONN_FAILED,
 
         NL80211_CMD_SET_MCAST_RATE,
 
         NL80211_CMD_SET_MAC_ACL,
 
         NL80211_CMD_RADAR_DETECT,
 
         NL80211_CMD_GET_PROTOCOL_FEATURES,
 
         NL80211_CMD_UPDATE_FT_IES,
         NL80211_CMD_FT_EVENT,
 
         NL80211_CMD_CRIT_PROTOCOL_START,
         NL80211_CMD_CRIT_PROTOCOL_STOP,
 
         NL80211_CMD_GET_COALESCE,
         NL80211_CMD_SET_COALESCE,
 
         NL80211_CMD_CHANNEL_SWITCH,
 
         NL80211_CMD_VENDOR,
 
         NL80211_CMD_SET_QOS_MAP,
 
         NL80211_CMD_ADD_TX_TS,
         NL80211_CMD_DEL_TX_TS,
 
         NL80211_CMD_GET_MPP,
 
         NL80211_CMD_JOIN_OCB,
         NL80211_CMD_LEAVE_OCB,
 
         NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
 
         NL80211_CMD_TDLS_CHANNEL_SWITCH,
         NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
 
         NL80211_CMD_WIPHY_REG_CHANGE,
 
         NL80211_CMD_ABORT_SCAN,
 
         NL80211_CMD_START_NAN,
         NL80211_CMD_STOP_NAN,
         NL80211_CMD_ADD_NAN_FUNCTION,
         NL80211_CMD_DEL_NAN_FUNCTION,
         NL80211_CMD_CHANGE_NAN_CONFIG,
         NL80211_CMD_NAN_MATCH,
 
         NL80211_CMD_SET_MULTICAST_TO_UNICAST,
 
         NL80211_CMD_UPDATE_CONNECT_PARAMS,
 
         NL80211_CMD_SET_PMK,
         NL80211_CMD_DEL_PMK,
 
         NL80211_CMD_PORT_AUTHORIZED,
 
         NL80211_CMD_RELOAD_REGDB,
 
         NL80211_CMD_EXTERNAL_AUTH,
 
         NL80211_CMD_STA_OPMODE_CHANGED,
 
         NL80211_CMD_CONTROL_PORT_FRAME,
 
         NL80211_CMD_GET_FTM_RESPONDER_STATS,
 
         NL80211_CMD_PEER_MEASUREMENT_START,
         NL80211_CMD_PEER_MEASUREMENT_RESULT,
         NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
 
         NL80211_CMD_NOTIFY_RADAR,
 
         NL80211_CMD_UPDATE_OWE_INFO,
 
         NL80211_CMD_PROBE_MESH_LINK,
 
         NL80211_CMD_SET_TID_CONFIG,
 
         NL80211_CMD_UNPROT_BEACON,
 
         NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
 
         NL80211_CMD_SET_SAR_SPECS,
 
         NL80211_CMD_OBSS_COLOR_COLLISION,
 
         NL80211_CMD_COLOR_CHANGE_REQUEST,
 
         NL80211_CMD_COLOR_CHANGE_STARTED,
         NL80211_CMD_COLOR_CHANGE_ABORTED,
         NL80211_CMD_COLOR_CHANGE_COMPLETED,
 
         NL80211_CMD_SET_FILS_AAD,
 
         NL80211_CMD_ASSOC_COMEBACK,
 
         NL80211_CMD_ADD_LINK,
         NL80211_CMD_REMOVE_LINK,
 
         NL80211_CMD_ADD_LINK_STA,
         NL80211_CMD_MODIFY_LINK_STA,
         NL80211_CMD_REMOVE_LINK_STA,
 
         NL80211_CMD_SET_HW_TIMESTAMP,
 
         NL80211_CMD_LINKS_REMOVED,
 
         NL80211_CMD_SET_TID_TO_LINK_MAPPING,
 
         /* add new commands above here */
 
         /* used to define NL80211_CMD_MAX below */
         __NL80211_CMD_AFTER_LAST,
         NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
 };
 
 /*
  * Allow user space programs to use #ifdef on new commands by defining them
  * here
  */
 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
 
 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
 /* source-level API compatibility */
 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
  *
  * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
  *
  * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
  *      /sys/class/ieee80211/<phyname>/index
  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
  * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
  * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,
  *      defines the channel together with the (deprecated)
  *      %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
  *      %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1
  *      and %NL80211_ATTR_CENTER_FREQ2
  * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
  *      of &enum nl80211_chan_width, describing the channel width. See the
  *      documentation of the enum for more information.
  * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
  *      channel, used for anything but 20 MHz bandwidth. In S1G this is the
  *      operating channel center frequency.
  * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
  *      channel, used only for 80+80 MHz bandwidth
  * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
  *      if HT20 or HT40 are to be used (i.e., HT disabled if not included):
  *      NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
  *              this attribute)
  *      NL80211_CHAN_HT20 = HT20 only
  *      NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
  *      NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
  *      This attribute is now deprecated.
  * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
  *      less than or equal to the RTS threshold; allowed range: 1..255;
  *      dot11ShortRetryLimit; u8
  * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
  *      greater than the RTS threshold; allowed range: 1..255;
  *      dot11ShortLongLimit; u8
  * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
  *      length in octets for frames; allowed range: 256..8000, disable
  *      fragmentation with (u32)-1; dot11FragmentationThreshold; u32
  * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
  *      larger than or equal to this use RTS/CTS handshake); allowed range:
  *      0..65536, disable with (u32)-1; dot11RTSThreshold; u32
  * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
  *      section 7.3.2.9; dot11CoverageClass; u8
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
  * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
  *
  * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices
  *      that don't have a netdev (u64)
  *
  * @NL80211_ATTR_MAC: MAC address (various uses)
  *
  * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
  *      16 bytes encryption key followed by 8 bytes each for TX and RX MIC
  *      keys
  * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
  * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
  *      section 7.3.2.25.1, e.g. 0x000FAC04)
  * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
  *      CCMP keys, each six bytes in little endian
  * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
  * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
  *      default management key
  * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
  *      other commands, indicates which pairwise cipher suites are used
  * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
  *      other commands, indicates which group cipher suite is used
  *
  * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
  * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
  * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
  * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
  *
  * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
  * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
  * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
  *      IEEE 802.11 7.3.1.6 (u16).
  * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
  *      rates as defined by IEEE 802.11 7.3.2.2 but without the length
  *      restriction (at most %NL80211_MAX_SUPP_RATES).
  * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
  *      to, or the AP interface the station was originally added to.
  * @NL80211_ATTR_STA_INFO: information about a station, part of station info
  *      given for %NL80211_CMD_GET_STATION, nested attribute containing
  *      info as possible, see &enum nl80211_sta_info.
  *
  * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
  *      consisting of a nested array.
  *
  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
  * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
  *      (see &enum nl80211_plink_action).
  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
  *      info given for %NL80211_CMD_GET_MPATH, nested attribute described at
  *      &enum nl80211_mpath_info.
  *
  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
  *      &enum nl80211_mntr_flags.
  *
  * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
  *      current regulatory domain should be set to or is already set to.
  *      For example, 'CR', for Costa Rica. This attribute is used by the kernel
  *      to query the CRDA to retrieve one regulatory domain. This attribute can
  *      also be used by userspace to query the kernel for the currently set
  *      regulatory domain. We chose an alpha2 as that is also used by the
  *      IEEE-802.11 country information element to identify a country.
  *      Users can also simply ask the wireless core to set regulatory domain
  *      to a specific alpha2.
  * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
  *      rules.
  *
  * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
  * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
  *      (u8, 0 or 1)
  * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
  *      (u8, 0 or 1)
  * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
  *      rates in format defined by IEEE 802.11 7.3.2.2 but without the length
  *      restriction (at most %NL80211_MAX_SUPP_RATES).
  *
  * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
  *      association request when used with NL80211_CMD_NEW_STATION)
  *
  * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
  *      supported interface types, each a flag attribute with the number
  *      of the interface mode.
  *
  * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
  *      %NL80211_CMD_SET_MGMT_EXTRA_IE.
  *
  * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
  *      %NL80211_CMD_SET_MGMT_EXTRA_IE).
  *
  * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
  *      a single scan request, a wiphy attribute.
  * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
  *      scan with a single scheduled scan request, a wiphy attribute.
  * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
  *      that can be added to a scan request
  * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
  *      elements that can be added to a scheduled scan request
  * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
  *      used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
  *
  * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
  * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
  *      scanning and include a zero-length SSID (wildcard) for wildcard scan
  * @NL80211_ATTR_BSS: scan result BSS
  *
  * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
  *      currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
  *      set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
  *
  * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
  *      an array of command numbers (i.e. a mapping index to command number)
  *      that the driver for the given wiphy supports.
  *
  * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
  *      and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
  *      NL80211_CMD_ASSOCIATE events
  * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
  * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
  *      represented as a u32
  * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
  *      %NL80211_CMD_DISASSOCIATE, u16
  *
  * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
  *      a u32
  *
  * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
  *      due to considerations from a beacon hint. This attribute reflects
  *      the state of the channel _before_ the beacon hint processing. This
  *      attributes consists of a nested attribute containing
  *      NL80211_FREQUENCY_ATTR_*
  * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
  *      due to considerations from a beacon hint. This attribute reflects
  *      the state of the channel _after_ the beacon hint processing. This
  *      attributes consists of a nested attribute containing
  *      NL80211_FREQUENCY_ATTR_*
  *
  * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
  *      cipher suites
  *
  * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
  *      for other networks on different channels
  *
  * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
  *      is used, e.g., with %NL80211_CMD_AUTHENTICATE event
  *
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *      used for the association (&enum nl80211_mfp, represented as a u32);
  *      this attribute can be used with %NL80211_CMD_ASSOCIATE and
  *      %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
  *      %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
  *      must have decided whether to use management frame protection or not.
  *      Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
  *      let the driver (or the firmware) decide whether to use MFP or not.
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *      &struct nl80211_sta_flag_update.
  *
  * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
  *      IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
  *      station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
  *      request, the driver will assume that the port is unauthorized until
  *      authorized by user space. Otherwise, port is marked authorized by
  *      default in station mode.
  * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
  *      ethertype that will be used for key negotiation. It can be
  *      specified with the associate and connect commands. If it is not
  *      specified, the value defaults to 0x888E (PAE, 802.1X). This
  *      attribute is also used as a flag in the wiphy information to
  *      indicate that protocols other than PAE are supported.
  * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
  *      %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
  *      ethertype frames used for key negotiation must not be encrypted.
  * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control
  *      port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)
  *      will be sent directly to the network interface or sent via the NL80211
  *      socket.  If this attribute is missing, then legacy behavior of sending
  *      control port frames directly to the network interface is used.  If the
  *      flag is included, then control port frames are sent over NL80211 instead
  *      using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *      to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
  *      flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
  *      frames are not forwarded over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *      We recommend using nested, driver-specific attributes within this.
  *
  * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
  *      event was due to the AP disconnecting the station, and not due to
  *      a local disconnect request.
  * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
  *      event (u16)
  * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
  *      that protected APs should be used. This is also used with NEW_BEACON to
  *      indicate that the BSS is to use protection.
  *
  * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *      indicate which WPA version(s) the AP we want to associate with is using
  *      (a u32 with flags from &enum nl80211_wpa_versions).
  * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *      indicate which key management algorithm(s) to use (an array of u32).
  *      This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
  *      indicating the supported AKM suites, intended for specific drivers which
  *      implement SME and have constraints on which AKMs are supported and also
  *      the cases where an AKM support is offloaded to the driver/firmware.
  *      If there is no such notification from the driver, user space should
  *      assume the driver supports all the AKM suites.
  *
  * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
  *      sent out by the card, for ROAM and successful CONNECT events.
  * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
  *      sent by peer, for ROAM and successful CONNECT events.
  *
  * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT
  *      commands to specify a request to reassociate within an ESS, i.e., to use
  *      Reassociate Request frame (with the value of this attribute in the
  *      Current AP address field) instead of Association Request frame which is
  *      used for the initial association to an ESS.
  *
  * @NL80211_ATTR_KEY: key information in a nested attribute with
  *      %NL80211_KEY_* sub-attributes
  * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
  *      and join_ibss(), key information is in a nested attribute each
  *      with %NL80211_KEY_* sub-attributes
  *
  * @NL80211_ATTR_PID: Process ID of a network namespace.
  * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.
  *
  * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
  *      dumps. This number increases whenever the object list being
  *      dumped changes, and as such userspace can verify that it has
  *      obtained a complete and consistent snapshot by verifying that
  *      all dump messages contain the same generation number. If it
  *      changed then the list changed and the dump should be repeated
  *      completely from scratch.
  *
  * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
  *
  * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
  *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
  *      containing info as possible, see &enum survey_info.
  *
  * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
  * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
  *      cache, a wiphy attribute.
  *
  * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
  * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
  *      specifies the maximum duration that can be requested with the
  *      remain-on-channel operation, in milliseconds, u32.
  *
  * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
  *
  * @NL80211_ATTR_TX_RATES: Nested set of attributes
  *      (enum nl80211_tx_rate_attributes) describing TX rates per band. The
  *      enum nl80211_band value is used as the index (nla_type() of the nested
  *      data. If a band is not included, it will be configured to allow all
  *      rates based on negotiated supported rates information. This attribute
  *      is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
  *      and joining mesh networks (not IBSS yet). In the later case, it must
  *      specify just a single bitrate, which is to be used for the beacon.
  *      The driver must also specify support for this with the extended
  *      features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
  *      NL80211_EXT_FEATURE_BEACON_RATE_HT,
  *      NL80211_EXT_FEATURE_BEACON_RATE_VHT and
  *      NL80211_EXT_FEATURE_BEACON_RATE_HE.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
  *      at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
  * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
  *      @NL80211_CMD_REGISTER_FRAME command.
  * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
  *      nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
  *      information about which frame types can be transmitted with
  *      %NL80211_CMD_FRAME.
  * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
  *      nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
  *      information about which frame types can be registered for RX.
  *
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *      acknowledged by the recipient.
  * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)
  *
  * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
  *
  * @NL80211_ATTR_CQM: connection quality monitor configuration in a
  *      nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
  *
  * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
  *      is requesting a local authentication/association state change without
  *      invoking actual management frame exchange. This can be used with
  *      NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
  *      NL80211_CMD_DISASSOCIATE.
  *
  * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
  *      connected to this BSS.
  *
  * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
  *      &enum nl80211_tx_power_setting for possible values.
  * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
  *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
  *      for non-automatic settings.
  *
  * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
  *      means support for per-station GTKs.
  *
  * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
  *      This can be used to mask out antennas which are not attached or should
  *      not be used for transmitting. If an antenna is not selected in this
  *      bitmap the hardware is not allowed to transmit on this antenna.
  *
  *      Each bit represents one antenna, starting with antenna 1 at the first
  *      bit. Depending on which antennas are selected in the bitmap, 802.11n
  *      drivers can derive which chainmasks to use (if all antennas belonging to
  *      a particular chain are disabled this chain should be disabled) and if
  *      a chain has diversity antennas whether diversity should be used or not.
  *      HT capabilities (STBC, TX Beamforming, Antenna selection) can be
  *      derived from the available chains after applying the antenna mask.
  *      Non-802.11n drivers can derive whether to use diversity or not.
  *      Drivers may reject configurations or RX/TX mask combinations they cannot
  *      support by returning -EINVAL.
  *
  * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
  *      This can be used to mask out antennas which are not attached or should
  *      not be used for receiving. If an antenna is not selected in this bitmap
  *      the hardware should not be configured to receive on this antenna.
  *      For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
  *
  * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
  *      for configuration as TX antennas via the above parameters.
  *
  * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
  *      for configuration as RX antennas via the above parameters.
  *
  * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
  *
  * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
  *      transmitted on another channel when the channel given doesn't match
  *      the current channel. If the current channel doesn't match and this
  *      flag isn't set, the frame will be rejected. This is also used as an
  *      nl80211 capability flag.
  *
  * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
  *
  * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
  *      attributes, specifying what a key should be set as default as.
  *      See &enum nl80211_key_default_types.
  *
  * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
  *      changed once the mesh is active.
  * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
  *      containing attributes from &enum nl80211_meshconf_params.
  * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
  *      allows auth frames in a mesh to be passed to userspace for processing via
  *      the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
  * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
  *      &enum nl80211_plink_state. Used when userspace is driving the peer link
  *      management state machine.  @NL80211_MESH_SETUP_USERSPACE_AMPE or
  *      @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
  *
  * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
  *      capabilities, the supported WoWLAN triggers
  * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
  *      indicate which WoW triggers should be enabled. This is also
  *      used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
  *      triggers.
  *
  * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
  *      cycles, in msecs.
  *
  * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
  *      sets of attributes to match during scheduled scans.  Only BSSs
  *      that match any of the sets will be reported.  These are
  *      pass-thru filter rules.
  *      For a match to succeed, the BSS must match all attributes of a
  *      set.  Since not every hardware supports matching all types of
  *      attributes, there is no guarantee that the reported BSSs are
  *      fully complying with the match sets and userspace needs to be
  *      able to ignore them by itself.
  *      Thus, the implementation is somewhat hardware-dependent, but
  *      this is only an optimization and the userspace application
  *      needs to handle all the non-filtered results anyway.
  *      If the match attributes don't make sense when combined with
  *      the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
  *      is included in the probe request, but the match attributes
  *      will never let it go through), -EINVAL may be returned.
  *      If omitted, no filtering is done.
  *
  * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
  *      interface combinations. In each nested item, it contains attributes
  *      defined in &enum nl80211_if_combination_attrs.
  *      If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),
  *      this attribute contains the interface combinations of the first radio.
  *      See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy
  *      combinations for the sum of all radios.
  * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
  *      %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
  *      are managed in software: interfaces of these types aren't subject to
  *      any restrictions in their number or combinations.
  *
  * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
  *      necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
  *
  * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
  *      nested array attribute containing an entry for each band, with the entry
  *      being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
  *      without the length restriction (at most %NL80211_MAX_SUPP_RATES).
  *
  * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
  *      and Probe Response (when response to wildcard Probe Request); see
  *      &enum nl80211_hidden_ssid, represented as a u32
  *
  * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
  *      This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
  *      provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
  *      driver (or firmware) replies to Probe Request frames.
  * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
  *      Response frames. This is used with %NL80211_CMD_NEW_BEACON and
  *      %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
  *      (Re)Association Response frames when the driver (or firmware) replies to
  *      (Re)Association Request frames.
  *
  * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
  *      of the station, see &enum nl80211_sta_wme_attr.
  * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
  *      as AP.
  *
  * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
  *      roaming to another AP in the same ESS if the signal lever is low.
  *
  * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
  *      candidate information, see &enum nl80211_pmksa_candidate_attr.
  *
  * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
  *      for management frames transmission. In order to avoid p2p probe/action
  *      frames are being transmitted at CCK rate in 2GHz band, the user space
  *      applications use this attribute.
  *      This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
  *      %NL80211_CMD_FRAME commands.
  *
  * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
  *      request, link setup confirm, link teardown, etc.). Values are
  *      described in the TDLS (802.11z) specification.
  * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
  *      TDLS conversation between two devices.
  * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
  *      &enum nl80211_tdls_operation, represented as a u8.
  * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
  *      as a TDLS peer sta.
  * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
  *      procedures should be performed by sending TDLS packets via
  *      %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
  *      used for asking the driver to perform a TDLS operation.
  *
  * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
  *      that have AP support to indicate that they have the AP SME integrated
  *      with support for the features listed in this attribute, see
  *      &enum nl80211_ap_sme_features.
  *
  * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
  *      the driver to not wait for an acknowledgement. Note that due to this,
  *      it will also not give a status callback nor return a cookie. This is
  *      mostly useful for probe responses to save airtime.
  *
  * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
  *      &enum nl80211_feature_flags and is advertised in wiphy information.
  * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
  *      requests while operating in AP-mode.
  *      This attribute holds a bitmap of the supported protocols for
  *      offloading (see &enum nl80211_probe_resp_offload_support_attr).
  *
  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
  *      probe-response frame. The DA field in the 802.11 header is zero-ed out,
  *      to be filled by the FW.
  * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *      Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *      Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *      Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable
  *      this feature during association. This is a flag attribute.
  *      Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
  *      The values that may be configured are:
  *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
  *       AMPDU density and AMPDU factor.
  *      All values are treated as suggestions and may be ignored
  *      by the driver as required.  The actual values may be seen in
  *      the station debugfs ht_caps file.
  * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_VHT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
  *      All values are treated as suggestions and may be ignored
  *      by the driver as required.  The actual values may be seen in
  *      the station debugfs vht_caps file.
  *
  * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
  *    abides to when initiating radiation on DFS channels. A country maps
  *    to one DFS region.
  *
  * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
  *      up to 16 TIDs.
  *
  * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
  *      used by the drivers which has MLME in firmware and does not have support
  *      to report per station tx/rx activity to free up the station entry from
  *      the list. This needs to be used when the driver advertises the
  *      capability to timeout the stations.
  *
  * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
  *      this attribute is (depending on the driver capabilities) added to
  *      received frames indicated with %NL80211_CMD_FRAME.
  *
  * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
  *      or 0 to disable background scan.
  *
  * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from
  *      userspace. If unset it is assumed the hint comes directly from
  *      a user. If set code could specify exactly what type of source
  *      was used to provide the hint. For the different types of
  *      allowed user regulatory hints see nl80211_user_reg_hint_type.
  *
  * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected
  *      the connection request from a station. nl80211_connect_failed_reason
  *      enum has different reasons of connection failure.
  *
  * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
  *      This contains the authentication frame body (non-IE and IE data),
  *      excluding the Authentication algorithm number, i.e., starting at the
  *      Authentication transaction sequence number field. It is used with
  *      authentication algorithms that need special fields to be added into
  *      the frames (SAE and FILS). Currently, only the SAE cases use the
  *      initial two fields (Authentication transaction sequence number and
  *      Status code). However, those fields are included in the attribute data
  *      for all authentication algorithms to keep the attribute definition
  *      consistent.
  *
  * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
  *      association request when used with NL80211_CMD_NEW_STATION)
  *
  * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)
  *
  * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with
  *      the START_AP and SET_BSS commands
  * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the
  *      START_AP and SET_BSS commands. This can have the values 0 or 1;
  *      if not given in START_AP 0 is assumed, if not given in SET_BSS
  *      no change is made.
  *
  * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
  *      defined in &enum nl80211_mesh_power_mode.
  *
  * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
  *      carried in a u32 attribute
  *
  * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
  *      MAC ACL.
  *
  * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
  *      number of MAC addresses that a device can support for MAC
  *      ACL.
  *
  * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,
  *      contains a value of enum nl80211_radar_event (u32).
  *
  * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver
  *      has and handles. The format is the same as the IE contents. See
  *      802.11-2012 8.4.2.29 for more information.
  * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver
  *      has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.
  *
  * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to
  *      the driver, e.g., to enable TDLS power save (PU-APSD).
  *
  * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are
  *      advertised to the driver, e.g., to enable TDLS off channel operations
  *      and PU-APSD.
  *
  * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
  *      &enum nl80211_protocol_features, the attribute is a u32.
  *
  * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
  *      receiving the data for a single wiphy split across multiple
  *      messages, given with wiphy dump message
  *
  * @NL80211_ATTR_MDID: Mobility Domain Identifier
  *
  * @NL80211_ATTR_IE_RIC: Resource Information Container Information
  *      Element
  *
  * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased
  *      reliability, see &enum nl80211_crit_proto_id (u16).
  * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
  *      the connection should have increased reliability (u16).
  *
  * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
  *      This is similar to @NL80211_ATTR_STA_AID but with a difference of being
  *      allowed to be used with the first @NL80211_CMD_SET_STATION command to
  *      update a TDLS peer STA entry.
  *
  * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
  *
  * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
  *      until the channel switch event.
  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
  *      must be blocked on the current channel (before the channel switch
  *      operation). Also included in the channel switch started event if quiet
  *      was requested by the AP.
  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
  *      for the time while performing a channel switch.
  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
  *      switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
  * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel
  *      switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).
  *
  * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
  *      As specified in the &enum nl80211_rxmgmt_flags.
  *
  * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.
  *
  * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported
  *      operating classes.
  *
  * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space
  *      controls DFS operation in IBSS mode. If the flag is included in
  *      %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS
  *      channels and reports radar events to userspace. Userspace is required
  *      to react to radar events, e.g. initiate a channel switch or leave the
  *      IBSS network.
  *
  * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports
  *      5 MHz channel bandwidth.
  * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports
  *      10 MHz channel bandwidth.
  *
  * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
  *      Notification Element based on association request when used with
  *      %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
  *      %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
  *      u8 attribute.
  *
  * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
  *      %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
  * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command
  * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this
  *      attribute is also used for vendor command feature advertisement
  * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy
  *      info, containing a nested array of possible events
  *
  * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This
  *      data is in the format defined for the payload of the QoS Map Set element
  *      in IEEE Std 802.11-2012, 8.4.2.97.
  *
  * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
  * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
  *
  * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
  *      associated stations are supported in AP mode (including P2P GO); u32.
  *      Since drivers may not have a fixed limit on the maximum number (e.g.,
  *      other concurrent operations may affect this), drivers are allowed to
  *      advertise values that cannot always be met. In such cases, an attempt
  *      to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
  *
  * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
  *      should be updated when the frame is transmitted.
  * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
  *      supported number of csa counters.
  *
  * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
  *      As specified in the &enum nl80211_tdls_peer_capability.
  *
  * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
  *      creation then the new interface will be owned by the netlink socket
  *      that created it and will be destroyed when the socket is closed.
  *      If set during scheduled scan start then the new scan req will be
  *      owned by the netlink socket that created it and the scheduled scan will
  *      be stopped when the socket is closed.
  *      If set during configuration of regulatory indoor operation then the
  *      regulatory indoor configuration would be owned by the netlink socket
  *      that configured the indoor setting, and the indoor operation would be
  *      cleared when the socket is closed.
  *      If set during NAN interface creation, the interface will be destroyed
  *      if the socket is closed just like any other interface. Moreover, NAN
  *      notifications will be sent in unicast to that socket. Without this
  *      attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
  *      multicast group.
  *      If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
  *      station will deauthenticate when the socket is closed.
  *      If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically
  *      torn down when the socket is closed.
  *      If set during %NL80211_CMD_JOIN_MESH the mesh setup will be
  *      automatically torn down when the socket is closed.
  *      If set during %NL80211_CMD_START_AP the AP will be automatically
  *      disabled when the socket is closed.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *      the TDLS link initiator.
  *
  * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection
  *      shall support Radio Resource Measurements (11k). This attribute can be
  *      used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.
  *      User space applications are expected to use this flag only if the
  *      underlying device supports these minimal RRM features:
  *              %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,
  *              %NL80211_FEATURE_QUIET,
  *      Or, if global RRM is supported, see:
  *              %NL80211_EXT_FEATURE_RRM
  *      If this flag is used, driver must add the Power Capabilities IE to the
  *      association request. In addition, it must also set the RRM capability
  *      flag in the association request's Capability Info field.
  *
  * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
  *      estimation algorithm (dynack). In order to activate dynack
  *      %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower
  *      drivers to indicate dynack capability. Dynack is automatically disabled
  *      setting valid value for coverage class.
  *
  * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
  * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
  * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds
  *      (per second) (u16 attribute)
  *
  * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
  *      &enum nl80211_smps_mode.
  *
  * @NL80211_ATTR_OPER_CLASS: operating class
  *
  * @NL80211_ATTR_MAC_MASK: MAC address mask
  *
  * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
  *      is self-managing its regulatory information and any regulatory domain
  *      obtained from it is coming from the device's wiphy and not the global
  *      cfg80211 regdomain.
  *
  * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
  *      array. The feature flags are identified by their bit index (see &enum
  *      nl80211_ext_feature_index). The bit index is ordered starting at the
  *      least-significant bit of the first byte in the array, ie. bit index 0
  *      is located at bit 0 of byte 0. bit index 25 would be located at bit 1
  *      of byte 3 (u8 array).
  *
  * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
  *      returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
  *      may return a survey entry without a channel indicating global radio
  *      statistics (only some values are valid and make sense.)
  *      For devices that don't return such an entry even then, the information
  *      should be contained in the result as the sum of the respective counters
  *      over all channels.
  *
  * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a
  *      scheduled scan is started.  Or the delay before a WoWLAN
  *      net-detect scan is started, counting from the moment the
  *      system is suspended.  This value is a u32, in seconds.
  *
  * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
  *      is operating in an indoor environment.
  *
  * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
  *      scheduled scan supported by the device (u32), a wiphy attribute.
  * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
  *      a scan plan (u32), a wiphy attribute.
  * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
  *      a scan plan (u32), a wiphy attribute.
  * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
  *      Each scan plan defines the number of scan iterations and the interval
  *      between scans. The last scan plan will always run infinitely,
  *      thus it must not specify the number of iterations, only the interval
  *      between scans. The scan plans are executed sequentially.
  *      Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
  * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
  *      in a PBSS. Specified in %NL80211_CMD_CONNECT to request
  *      connecting to a PCP, and in %NL80211_CMD_START_AP to start
  *      a PCP instead of AP. Relevant for DMG networks only.
  * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
  *      BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains
  *      attributes according &enum nl80211_bss_select_attr to indicate what
  *      BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT
  *      it contains the behaviour-specific attribute containing the parameters for
  *      BSS selection to be done by driver and/or firmware.
  *
  * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported
  *      or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status
  *
  * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
  *
  * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
  *      %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
  *      %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and
  *      other interface-type specific capabilities per interface type. For MLO,
  *      %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are
  *      present.
  *
  * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO
  *      groupID for monitor mode.
  *      The first 8 bytes are a mask that defines the membership in each
  *      group (there are 64 groups, group 0 and 63 are reserved),
  *      each bit represents a group and set to 1 for being a member in
  *      that group and 0 for not being a member.
  *      The remaining 16 bytes define the position in each group: 2 bits for
  *      each group.
  *      (smaller group numbers represented on most significant bits and bigger
  *      group numbers on least significant bits.)
  *      This attribute is used only if all interfaces are in monitor mode.
  *      Set this attribute in order to monitor packets using the given MU-MIMO
  *      groupID data.
  *      to turn off that feature set all the bits of the groupID to zero.
  * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow
  *      when using MU-MIMO air sniffer.
  *      to turn that feature off set an invalid mac address
  *      (e.g. FF:FF:FF:FF:FF:FF)
  *
  * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually
  *      started (u64). The time is the TSF of the BSS the interface that
  *      requested the scan is connected to (if available, otherwise this
  *      attribute must not be included).
  * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which
  *      %NL80211_ATTR_SCAN_START_TIME_TSF is set.
  * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If
  *      %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the
  *      maximum measurement duration allowed. This attribute is used with
  *      measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN
  *      if the scan is used for beacon report radio measurement.
  * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
  *      that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is
  *      mandatory. If this flag is not set, the duration is the maximum duration
  *      and the actual measurement duration may be shorter.
  *
  * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
  *      used to pull the stored data for mesh peer in power save state.
  *
  * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
  *      %NL80211_CMD_START_NAN and optionally with
  *      %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
  *      Also, values 1 and 255 are reserved for certification purposes and
  *      should not be used during a normal device operation.
  * @NL80211_ATTR_BANDS: operating bands configuration.  This is a u32
  *      bitmask of BIT(NL80211_BAND_*) as described in %enum
  *      nl80211_band.  For instance, for NL80211_BAND_2GHZ, bit 0
  *      would be set.  This attribute is used with
  *      %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
  *      it is optional.  If no bands are set, it means don't-care and
  *      the device will decide what to use.
  * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
  *      &enum nl80211_nan_func_attributes for description of this nested
  *      attribute.
  * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
  *      See &enum nl80211_nan_match_attributes.
  * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
  *      protection.
  * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
  *      Request/Response frame protection. This attribute contains the 16 octet
  *      STA Nonce followed by 16 octets of AP Nonce.
  *
  * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast
  *      packets should be send out as unicast to all stations (flag attribute).
  *
  * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
  *      used in various commands/events for specifying the BSSID.
  *
  * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
  *      other BSSs has to be better or slightly worse than the current
  *      connected BSS so that they get reported to user space.
  *      This will give an opportunity to userspace to consider connecting to
  *      other matching BSSs which have better or slightly worse RSSI than
  *      the current connected BSS by using an offloaded operation to avoid
  *      unnecessary wakeups.
  *
  * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
  *      the specified band is to be adjusted before doing
  *      %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out
  *      better BSSs. The attribute value is a packed structure
  *      value as specified by &struct nl80211_bss_select_rssi_adjust.
  *
  * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
  *      u32 attribute with an &enum nl80211_timeout_reason value. This is used,
  *      e.g., with %NL80211_CMD_CONNECT event.
  *
  * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
  *      username part of NAI used to refer keys rRK and rIK. This is used with
  *      %NL80211_CMD_CONNECT.
  *
  * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
  *      of NAI specifying the domain name of the ER server. This is used with
  *      %NL80211_CMD_CONNECT.
  *
  * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
  *      to use in ERP messages. This is used in generating the FILS wrapped data
  *      for FILS authentication and is used with %NL80211_CMD_CONNECT.
  *
  * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
  *      NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
  *      %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
  *      from successful FILS authentication and is used with
  *      %NL80211_CMD_CONNECT.
  *
  * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
  *      identifying the scope of PMKSAs. This is used with
  *      @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
  * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
  *      %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
  *      For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide
  *      PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X
  *      authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT
  *      support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
  *      is included as well.
  *
  * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
  *      indicate that it supports multiple active scheduled scan requests.
  * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
  *      scan request that may be active for the device (u32).
  *
  * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
  *      in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
  *      wants to use the supported offload of the 4-way handshake.
  * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
  * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
  *
  * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
  *     authentication operation (u32 attribute with an
  *     &enum nl80211_external_auth_action value). This is used with the
  *     %NL80211_CMD_EXTERNAL_AUTH request event.
  * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
  *      space supports external authentication. This attribute shall be used
  *      with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
  *      may offload authentication processing to user space if this capability
  *      is indicated in the respective requests from the user space. (This flag
  *      attribute deprecated for %NL80211_CMD_START_AP, use
  *      %NL80211_ATTR_AP_SETTINGS_FLAGS)
  *
  * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
  *      u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
  *
  * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
  *      nl80211_txq_stats)
  * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.
  *      The smaller of this and the memory limit is enforced.
  * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the
  *      TXQ queues for this phy. The smaller of this and the packet limit is
  *      enforced.
  * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
  *      a flow is assigned on each round of the DRR scheduler.
  * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
  *      association request when used with NL80211_CMD_NEW_STATION). Can be set
  *      only if %NL80211_STA_FLAG_WME is set.
  *
  * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
  *      in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
  *      measurement (FTM) responder functionality and containing parameters as
  *      possible, see &enum nl80211_ftm_responder_attr
  *
  * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
  *      statistics, see &enum nl80211_ftm_responder_stats.
  *
  * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
  *      if the attribute is not given no timeout is requested. Note that 0 is an
  *      invalid value.
  *
  * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
  *      data, uses nested attributes specified in
  *      &enum nl80211_peer_measurement_attrs.
  *      This is also used for capability advertisement in the wiphy information,
  *      with the appropriate sub-attributes.
  *
  * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
  *      scheduler.
  *
  * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
  *      station associated with the AP. See &enum nl80211_tx_power_setting for
  *      possible values.
  * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
  *      allows to set Tx power for a station. If this attribute is not included,
  *      the default per-interface tx power setting will be overriding. Driver
  *      should be picking up the lowest tx power, either tx power per-interface
  *      or per-station.
  *
  * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
  *      is used with %NL80211_CMD_CONNECT to provide password for offloading
  *      SAE authentication for WPA3-Personal networks.
  *
  * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
  *
  * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
  *      functionality.
  *
  * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
  *      channel(s) that are allowed to be used for EDMG transmissions.
  *      Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
  * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
  *      the allowed channel bandwidth configurations. (u8 attribute)
  *      Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
  *
  * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
  *      (u16).
  *
  * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
  *
  * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
  *      using attributes from &enum nl80211_iftype_akm_attributes. This
  *      attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
  *      supported AKM suites capability per interface. AKMs advertised in
  *      %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
  *      advertised for a specific interface type.
  *
  * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
  *      nested attribute with &enum nl80211_tid_config_attr sub-attributes;
  *      on output (in wiphy attributes) it contains only the feature sub-
  *      attributes.
  *
  * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
  *      port in order to forward/receive them as ordinary data frames.
  *
  * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
  *      dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
  *      An optional parameter configured through %NL80211_CMD_SET_PMKSA.
  *      Drivers that trigger roaming need to know the lifetime of the
  *      configured PMKSA for triggering the full vs. PMKSA caching based
  *      authentication. This timeout helps authentication methods like SAE,
  *      where PMK gets updated only by going through a full (new SAE)
  *      authentication instead of getting updated during an association for EAP
  *      authentication. No new full authentication within the PMK expiry shall
  *      result in a disassociation at the end of the lifetime.
  *
  * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
  *      terms of percentage of %NL80211_ATTR_PMK_LIFETIME
  *      (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
  *      parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
  *      driver to trigger a full authentication roam (without PMKSA caching)
  *      after the reauthentication threshold time, but before the PMK lifetime
  *      has expired.
  *
  *      Authentication methods like SAE need to be able to generate a new PMKSA
  *      entry without having to force a disconnection after the PMK timeout. If
  *      no roaming occurs between the reauth threshold and PMK expiration,
  *      disassociation is still forced.
  * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
  *      %NL80211_CMD_REGISTER_FRAME command, see the description there.
  * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
  *      %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
  *      an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
  * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
  *      first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
  * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
  *
  * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
  *      association request when used with NL80211_CMD_NEW_STATION).
  *
  * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
  *      discovery. It is a nested attribute, see
  *      &enum nl80211_fils_discovery_attributes. Userspace should pass an empty
  *      nested attribute to disable this feature and delete the templates.
  *
  * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
  *      unsolicited broadcast probe response. It is a nested attribute, see
  *      &enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty
  *      nested attribute to disable this feature and delete the templates.
  *
  * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
  *      association request when used with NL80211_CMD_NEW_STATION)
  * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
  *      override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
  *      NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
  *
  * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
  *      derivation in WPA3-Personal networks which are using SAE authentication.
  *      This is a u8 attribute that encapsulates one of the values from
  *      &enum nl80211_sae_pwe_mechanism.
  *
  * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
  *      used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
  *      of %nl80211_sar_attrs which specifies the sar type and related
  *      sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
  *
  * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
  *      disassoc events to indicate that an immediate reconnect to the AP
  *      is desired.
  *
  * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the
  *      %NL80211_CMD_OBSS_COLOR_COLLISION event.
  *
  * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
  *      until the color switch event.
  * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
  *      switching to
  * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE
  *      information for the time while performing a color switch.
  *
  * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID
  *      advertisements (MBSSID) parameters in AP mode.
  *      Kernel uses this attribute to indicate the driver's support for MBSSID
  *      and enhanced multi-BSSID advertisements (EMA AP) to the userspace.
  *      Userspace should use this attribute to configure per interface MBSSID
  *      parameters.
  *      See &enum nl80211_mbssid_config_attributes for details.
  *
  * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements.
  *      Mandatory parameter for the transmitting interface to enable MBSSID.
  *      Optional for the non-transmitting interfaces.
  *
  * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain
  *      available for radar/CAC detection on some hw. This chain can't be used
  *      to transmit or receive frames and it is bounded to a running wdev.
  *      Background radar/CAC detection allows to avoid the CAC downtime
  *      switching on a different channel during CAC detection on the selected
  *      radar channel.
  *
  * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
  *      enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
  *      used with %NL80211_CMD_START_AP request.
  *
  * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from
  *      association request when used with NL80211_CMD_NEW_STATION). Can be set
  *      only if %NL80211_STA_FLAG_WME is set.
  *
  * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with
  *      various commands that need a link ID to operate.
  * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some
  *      per-link information and a link ID.
  * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as
  *      authenticate/associate.
  *
  * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO
  *      connection. Used with %NL80211_CMD_CONNECT. If this attribute is not
  *      included in NL80211_CMD_CONNECT drivers must not perform MLO connection.
  *
  * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of
  *      AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and
  *      %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this
  *      attribute is not present userspace shall consider maximum number of AKM
  *      suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum
  *      number prior to the introduction of this attribute.
  *
  * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16)
  * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16)
  *
  * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in
  *      nanoseconds (u64). This is the device clock timestamp so it will
  *      probably reset when the device is stopped or the firmware is reset.
  *      When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX
  *      timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates
  *      the ack TX timestamp.
  * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in
  *      nanoseconds (u64). This is the device clock timestamp so it will
  *      probably reset when the device is stopped or the firmware is reset.
  *      When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX
  *      timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates
  *      the incoming frame RX timestamp.
  * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent
  *      (re)associations.
  *
  * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest
  *      bit corresponds to the lowest 20 MHz channel. Each bit set to 1
  *      indicates that the sub-channel is punctured. Higher 16 bits are
  *      reserved.
  *
  * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW
  *      timestamping can be enabled for concurrently (u16), a wiphy attribute.
  *      A value of 0xffff indicates setting for all peers (i.e. not specifying
  *      an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported.
  * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should
  *      be enabled or not (flag attribute).
  *
  * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for
  *      reduced neighbor report (RNR) elements. This attribute can be used
  *      only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled.
  *      Userspace is responsible for splitting the RNR into multiple
  *      elements such that each element excludes the non-transmitting
  *      profiles already included in the MBSSID element
  *      (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon
  *      will be generated by adding MBSSID and RNR elements at the same
  *      index. If the userspace includes more RNR elements than number of
  *      MBSSID elements then these will be added in every EMA beacon.
  *
  * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
  *      disabled.
  *
  * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
  *      include BSSes that can only be used in restricted scenarios and/or
  *      cannot be used at all.
  *
  * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
  *      link mapping. The length is 8 * sizeof(u16). For each TID the link
  *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
  *      in Draft P802.11be_D4.0.
  * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
  *      link mapping. The length is 8 * sizeof(u16). For each TID the link
  *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
  *      in Draft P802.11be_D4.0.
  *
  * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
  *      %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
  *      are used on this connection
  *
  * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios
  *      belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.
  *
  * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the
  *      supported interface combinations for all radios combined. In each
  *      nested item, it contains attributes defined in
  *      &enum nl80211_if_combination_attrs.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_attrs {
 /* don't change the order or add anything between, this is ABI! */
         NL80211_ATTR_UNSPEC,
 
         NL80211_ATTR_WIPHY,
         NL80211_ATTR_WIPHY_NAME,
 
         NL80211_ATTR_IFINDEX,
         NL80211_ATTR_IFNAME,
         NL80211_ATTR_IFTYPE,
 
         NL80211_ATTR_MAC,
 
         NL80211_ATTR_KEY_DATA,
         NL80211_ATTR_KEY_IDX,
         NL80211_ATTR_KEY_CIPHER,
         NL80211_ATTR_KEY_SEQ,
         NL80211_ATTR_KEY_DEFAULT,
 
         NL80211_ATTR_BEACON_INTERVAL,
         NL80211_ATTR_DTIM_PERIOD,
         NL80211_ATTR_BEACON_HEAD,
         NL80211_ATTR_BEACON_TAIL,
 
         NL80211_ATTR_STA_AID,
         NL80211_ATTR_STA_FLAGS,
         NL80211_ATTR_STA_LISTEN_INTERVAL,
         NL80211_ATTR_STA_SUPPORTED_RATES,
         NL80211_ATTR_STA_VLAN,
         NL80211_ATTR_STA_INFO,
 
         NL80211_ATTR_WIPHY_BANDS,
 
         NL80211_ATTR_MNTR_FLAGS,
 
         NL80211_ATTR_MESH_ID,
         NL80211_ATTR_STA_PLINK_ACTION,
         NL80211_ATTR_MPATH_NEXT_HOP,
         NL80211_ATTR_MPATH_INFO,
 
         NL80211_ATTR_BSS_CTS_PROT,
         NL80211_ATTR_BSS_SHORT_PREAMBLE,
         NL80211_ATTR_BSS_SHORT_SLOT_TIME,
 
         NL80211_ATTR_HT_CAPABILITY,
 
         NL80211_ATTR_SUPPORTED_IFTYPES,
 
         NL80211_ATTR_REG_ALPHA2,
         NL80211_ATTR_REG_RULES,
 
         NL80211_ATTR_MESH_CONFIG,
 
         NL80211_ATTR_BSS_BASIC_RATES,
 
         NL80211_ATTR_WIPHY_TXQ_PARAMS,
         NL80211_ATTR_WIPHY_FREQ,
         NL80211_ATTR_WIPHY_CHANNEL_TYPE,
 
         NL80211_ATTR_KEY_DEFAULT_MGMT,
 
         NL80211_ATTR_MGMT_SUBTYPE,
         NL80211_ATTR_IE,
 
         NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
 
         NL80211_ATTR_SCAN_FREQUENCIES,
         NL80211_ATTR_SCAN_SSIDS,
         NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
         NL80211_ATTR_BSS,
 
         NL80211_ATTR_REG_INITIATOR,
         NL80211_ATTR_REG_TYPE,
 
         NL80211_ATTR_SUPPORTED_COMMANDS,
 
         NL80211_ATTR_FRAME,
         NL80211_ATTR_SSID,
         NL80211_ATTR_AUTH_TYPE,
         NL80211_ATTR_REASON_CODE,
 
         NL80211_ATTR_KEY_TYPE,
 
         NL80211_ATTR_MAX_SCAN_IE_LEN,
         NL80211_ATTR_CIPHER_SUITES,
 
         NL80211_ATTR_FREQ_BEFORE,
         NL80211_ATTR_FREQ_AFTER,
 
         NL80211_ATTR_FREQ_FIXED,
 
 
         NL80211_ATTR_WIPHY_RETRY_SHORT,
         NL80211_ATTR_WIPHY_RETRY_LONG,
         NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
         NL80211_ATTR_WIPHY_RTS_THRESHOLD,
 
         NL80211_ATTR_TIMED_OUT,
 
         NL80211_ATTR_USE_MFP,
 
         NL80211_ATTR_STA_FLAGS2,
 
         NL80211_ATTR_CONTROL_PORT,
 
         NL80211_ATTR_TESTDATA,
 
         NL80211_ATTR_PRIVACY,
 
         NL80211_ATTR_DISCONNECTED_BY_AP,
         NL80211_ATTR_STATUS_CODE,
 
         NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
         NL80211_ATTR_CIPHER_SUITE_GROUP,
         NL80211_ATTR_WPA_VERSIONS,
         NL80211_ATTR_AKM_SUITES,
 
         NL80211_ATTR_REQ_IE,
         NL80211_ATTR_RESP_IE,
 
         NL80211_ATTR_PREV_BSSID,
 
         NL80211_ATTR_KEY,
         NL80211_ATTR_KEYS,
 
         NL80211_ATTR_PID,
 
         NL80211_ATTR_4ADDR,
 
         NL80211_ATTR_SURVEY_INFO,
 
         NL80211_ATTR_PMKID,
         NL80211_ATTR_MAX_NUM_PMKIDS,
 
         NL80211_ATTR_DURATION,
 
         NL80211_ATTR_COOKIE,
 
         NL80211_ATTR_WIPHY_COVERAGE_CLASS,
 
         NL80211_ATTR_TX_RATES,
 
         NL80211_ATTR_FRAME_MATCH,
 
         NL80211_ATTR_ACK,
 
         NL80211_ATTR_PS_STATE,
 
         NL80211_ATTR_CQM,
 
         NL80211_ATTR_LOCAL_STATE_CHANGE,
 
         NL80211_ATTR_AP_ISOLATE,
 
         NL80211_ATTR_WIPHY_TX_POWER_SETTING,
         NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
 
         NL80211_ATTR_TX_FRAME_TYPES,
         NL80211_ATTR_RX_FRAME_TYPES,
         NL80211_ATTR_FRAME_TYPE,
 
         NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
         NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
 
         NL80211_ATTR_SUPPORT_IBSS_RSN,
 
         NL80211_ATTR_WIPHY_ANTENNA_TX,
         NL80211_ATTR_WIPHY_ANTENNA_RX,
 
         NL80211_ATTR_MCAST_RATE,
 
         NL80211_ATTR_OFFCHANNEL_TX_OK,
 
         NL80211_ATTR_BSS_HT_OPMODE,
 
         NL80211_ATTR_KEY_DEFAULT_TYPES,
 
         NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
 
         NL80211_ATTR_MESH_SETUP,
 
         NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
         NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
 
         NL80211_ATTR_SUPPORT_MESH_AUTH,
         NL80211_ATTR_STA_PLINK_STATE,
 
         NL80211_ATTR_WOWLAN_TRIGGERS,
         NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
 
         NL80211_ATTR_SCHED_SCAN_INTERVAL,
 
         NL80211_ATTR_INTERFACE_COMBINATIONS,
         NL80211_ATTR_SOFTWARE_IFTYPES,
 
         NL80211_ATTR_REKEY_DATA,
 
         NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
         NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
 
         NL80211_ATTR_SCAN_SUPP_RATES,
 
         NL80211_ATTR_HIDDEN_SSID,
 
         NL80211_ATTR_IE_PROBE_RESP,
         NL80211_ATTR_IE_ASSOC_RESP,
 
         NL80211_ATTR_STA_WME,
         NL80211_ATTR_SUPPORT_AP_UAPSD,
 
         NL80211_ATTR_ROAM_SUPPORT,
 
         NL80211_ATTR_SCHED_SCAN_MATCH,
         NL80211_ATTR_MAX_MATCH_SETS,
 
         NL80211_ATTR_PMKSA_CANDIDATE,
 
         NL80211_ATTR_TX_NO_CCK_RATE,
 
         NL80211_ATTR_TDLS_ACTION,
         NL80211_ATTR_TDLS_DIALOG_TOKEN,
         NL80211_ATTR_TDLS_OPERATION,
         NL80211_ATTR_TDLS_SUPPORT,
         NL80211_ATTR_TDLS_EXTERNAL_SETUP,
 
         NL80211_ATTR_DEVICE_AP_SME,
 
         NL80211_ATTR_DONT_WAIT_FOR_ACK,
 
         NL80211_ATTR_FEATURE_FLAGS,
 
         NL80211_ATTR_PROBE_RESP_OFFLOAD,
 
         NL80211_ATTR_PROBE_RESP,
 
         NL80211_ATTR_DFS_REGION,
 
         NL80211_ATTR_DISABLE_HT,
         NL80211_ATTR_HT_CAPABILITY_MASK,
 
         NL80211_ATTR_NOACK_MAP,
 
         NL80211_ATTR_INACTIVITY_TIMEOUT,
 
         NL80211_ATTR_RX_SIGNAL_DBM,
 
         NL80211_ATTR_BG_SCAN_PERIOD,
 
         NL80211_ATTR_WDEV,
 
         NL80211_ATTR_USER_REG_HINT_TYPE,
 
         NL80211_ATTR_CONN_FAILED_REASON,
 
         NL80211_ATTR_AUTH_DATA,
 
         NL80211_ATTR_VHT_CAPABILITY,
 
         NL80211_ATTR_SCAN_FLAGS,
 
         NL80211_ATTR_CHANNEL_WIDTH,
         NL80211_ATTR_CENTER_FREQ1,
         NL80211_ATTR_CENTER_FREQ2,
 
         NL80211_ATTR_P2P_CTWINDOW,
         NL80211_ATTR_P2P_OPPPS,
 
         NL80211_ATTR_LOCAL_MESH_POWER_MODE,
 
         NL80211_ATTR_ACL_POLICY,
 
         NL80211_ATTR_MAC_ADDRS,
 
         NL80211_ATTR_MAC_ACL_MAX,
 
         NL80211_ATTR_RADAR_EVENT,
 
         NL80211_ATTR_EXT_CAPA,
         NL80211_ATTR_EXT_CAPA_MASK,
 
         NL80211_ATTR_STA_CAPABILITY,
         NL80211_ATTR_STA_EXT_CAPABILITY,
 
         NL80211_ATTR_PROTOCOL_FEATURES,
         NL80211_ATTR_SPLIT_WIPHY_DUMP,
 
         NL80211_ATTR_DISABLE_VHT,
         NL80211_ATTR_VHT_CAPABILITY_MASK,
 
         NL80211_ATTR_MDID,
         NL80211_ATTR_IE_RIC,
 
         NL80211_ATTR_CRIT_PROT_ID,
         NL80211_ATTR_MAX_CRIT_PROT_DURATION,
 
         NL80211_ATTR_PEER_AID,
 
         NL80211_ATTR_COALESCE_RULE,
 
         NL80211_ATTR_CH_SWITCH_COUNT,
         NL80211_ATTR_CH_SWITCH_BLOCK_TX,
         NL80211_ATTR_CSA_IES,
         NL80211_ATTR_CNTDWN_OFFS_BEACON,
         NL80211_ATTR_CNTDWN_OFFS_PRESP,
 
         NL80211_ATTR_RXMGMT_FLAGS,
 
         NL80211_ATTR_STA_SUPPORTED_CHANNELS,
 
         NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,
 
         NL80211_ATTR_HANDLE_DFS,
 
         NL80211_ATTR_SUPPORT_5_MHZ,
         NL80211_ATTR_SUPPORT_10_MHZ,
 
         NL80211_ATTR_OPMODE_NOTIF,
 
         NL80211_ATTR_VENDOR_ID,
         NL80211_ATTR_VENDOR_SUBCMD,
         NL80211_ATTR_VENDOR_DATA,
         NL80211_ATTR_VENDOR_EVENTS,
 
         NL80211_ATTR_QOS_MAP,
 
         NL80211_ATTR_MAC_HINT,
         NL80211_ATTR_WIPHY_FREQ_HINT,
 
         NL80211_ATTR_MAX_AP_ASSOC_STA,
 
         NL80211_ATTR_TDLS_PEER_CAPABILITY,
 
         NL80211_ATTR_SOCKET_OWNER,
 
         NL80211_ATTR_CSA_C_OFFSETS_TX,
         NL80211_ATTR_MAX_CSA_COUNTERS,
 
         NL80211_ATTR_TDLS_INITIATOR,
 
         NL80211_ATTR_USE_RRM,
 
         NL80211_ATTR_WIPHY_DYN_ACK,
 
         NL80211_ATTR_TSID,
         NL80211_ATTR_USER_PRIO,
         NL80211_ATTR_ADMITTED_TIME,
 
         NL80211_ATTR_SMPS_MODE,
 
         NL80211_ATTR_OPER_CLASS,
 
         NL80211_ATTR_MAC_MASK,
 
         NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
 
         NL80211_ATTR_EXT_FEATURES,
 
         NL80211_ATTR_SURVEY_RADIO_STATS,
 
         NL80211_ATTR_NETNS_FD,
 
         NL80211_ATTR_SCHED_SCAN_DELAY,
 
         NL80211_ATTR_REG_INDOOR,
 
         NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
         NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
         NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
         NL80211_ATTR_SCHED_SCAN_PLANS,
 
         NL80211_ATTR_PBSS,
 
         NL80211_ATTR_BSS_SELECT,
 
         NL80211_ATTR_STA_SUPPORT_P2P_PS,
 
         NL80211_ATTR_PAD,
 
         NL80211_ATTR_IFTYPE_EXT_CAPA,
 
         NL80211_ATTR_MU_MIMO_GROUP_DATA,
         NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,
 
         NL80211_ATTR_SCAN_START_TIME_TSF,
         NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,
         NL80211_ATTR_MEASUREMENT_DURATION,
         NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,
 
         NL80211_ATTR_MESH_PEER_AID,
 
         NL80211_ATTR_NAN_MASTER_PREF,
         NL80211_ATTR_BANDS,
         NL80211_ATTR_NAN_FUNC,
         NL80211_ATTR_NAN_MATCH,
 
         NL80211_ATTR_FILS_KEK,
         NL80211_ATTR_FILS_NONCES,
 
         NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,
 
         NL80211_ATTR_BSSID,
 
         NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
         NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
 
         NL80211_ATTR_TIMEOUT_REASON,
 
         NL80211_ATTR_FILS_ERP_USERNAME,
         NL80211_ATTR_FILS_ERP_REALM,
         NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
         NL80211_ATTR_FILS_ERP_RRK,
         NL80211_ATTR_FILS_CACHE_ID,
 
         NL80211_ATTR_PMK,
 
         NL80211_ATTR_SCHED_SCAN_MULTI,
         NL80211_ATTR_SCHED_SCAN_MAX_REQS,
 
         NL80211_ATTR_WANT_1X_4WAY_HS,
         NL80211_ATTR_PMKR0_NAME,
         NL80211_ATTR_PORT_AUTHORIZED,
 
         NL80211_ATTR_EXTERNAL_AUTH_ACTION,
         NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
 
         NL80211_ATTR_NSS,
         NL80211_ATTR_ACK_SIGNAL,
 
         NL80211_ATTR_CONTROL_PORT_OVER_NL80211,
 
         NL80211_ATTR_TXQ_STATS,
         NL80211_ATTR_TXQ_LIMIT,
         NL80211_ATTR_TXQ_MEMORY_LIMIT,
         NL80211_ATTR_TXQ_QUANTUM,
 
         NL80211_ATTR_HE_CAPABILITY,
 
         NL80211_ATTR_FTM_RESPONDER,
 
         NL80211_ATTR_FTM_RESPONDER_STATS,
 
         NL80211_ATTR_TIMEOUT,
 
         NL80211_ATTR_PEER_MEASUREMENTS,
 
         NL80211_ATTR_AIRTIME_WEIGHT,
         NL80211_ATTR_STA_TX_POWER_SETTING,
         NL80211_ATTR_STA_TX_POWER,
 
         NL80211_ATTR_SAE_PASSWORD,
 
         NL80211_ATTR_TWT_RESPONDER,
 
         NL80211_ATTR_HE_OBSS_PD,
 
         NL80211_ATTR_WIPHY_EDMG_CHANNELS,
         NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
 
         NL80211_ATTR_VLAN_ID,
 
         NL80211_ATTR_HE_BSS_COLOR,
 
         NL80211_ATTR_IFTYPE_AKM_SUITES,
 
         NL80211_ATTR_TID_CONFIG,
 
         NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
 
         NL80211_ATTR_PMK_LIFETIME,
         NL80211_ATTR_PMK_REAUTH_THRESHOLD,
 
         NL80211_ATTR_RECEIVE_MULTICAST,
         NL80211_ATTR_WIPHY_FREQ_OFFSET,
         NL80211_ATTR_CENTER_FREQ1_OFFSET,
         NL80211_ATTR_SCAN_FREQ_KHZ,
 
         NL80211_ATTR_HE_6GHZ_CAPABILITY,
 
         NL80211_ATTR_FILS_DISCOVERY,
 
         NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
 
         NL80211_ATTR_S1G_CAPABILITY,
         NL80211_ATTR_S1G_CAPABILITY_MASK,
 
         NL80211_ATTR_SAE_PWE,
 
         NL80211_ATTR_RECONNECT_REQUESTED,
 
         NL80211_ATTR_SAR_SPEC,
 
         NL80211_ATTR_DISABLE_HE,
 
         NL80211_ATTR_OBSS_COLOR_BITMAP,
 
         NL80211_ATTR_COLOR_CHANGE_COUNT,
         NL80211_ATTR_COLOR_CHANGE_COLOR,
         NL80211_ATTR_COLOR_CHANGE_ELEMS,
 
         NL80211_ATTR_MBSSID_CONFIG,
         NL80211_ATTR_MBSSID_ELEMS,
 
         NL80211_ATTR_RADAR_BACKGROUND,
 
         NL80211_ATTR_AP_SETTINGS_FLAGS,
 
         NL80211_ATTR_EHT_CAPABILITY,
 
         NL80211_ATTR_DISABLE_EHT,
 
         NL80211_ATTR_MLO_LINKS,
         NL80211_ATTR_MLO_LINK_ID,
         NL80211_ATTR_MLD_ADDR,
 
         NL80211_ATTR_MLO_SUPPORT,
 
         NL80211_ATTR_MAX_NUM_AKM_SUITES,
 
         NL80211_ATTR_EML_CAPABILITY,
         NL80211_ATTR_MLD_CAPA_AND_OPS,
 
         NL80211_ATTR_TX_HW_TIMESTAMP,
         NL80211_ATTR_RX_HW_TIMESTAMP,
         NL80211_ATTR_TD_BITMAP,
 
         NL80211_ATTR_PUNCT_BITMAP,
 
         NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS,
         NL80211_ATTR_HW_TIMESTAMP_ENABLED,
 
         NL80211_ATTR_EMA_RNR_ELEMS,
 
         NL80211_ATTR_MLO_LINK_DISABLED,
 
         NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
 
         NL80211_ATTR_MLO_TTLM_DLINK,
         NL80211_ATTR_MLO_TTLM_ULINK,
 
         NL80211_ATTR_ASSOC_SPP_AMSDU,
 
         NL80211_ATTR_WIPHY_RADIOS,
         NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,
 
         /* add attributes here, update the policy in nl80211.c */
 
         __NL80211_ATTR_AFTER_LAST,
         NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
         NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
 };
 
 /* source-level API compatibility */
 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
 #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
 #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON
 #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP
 
 /*
  * Allow user space programs to use #ifdef on new attributes by defining them
  * here
  */
 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
 #define NL80211_ATTR_IE NL80211_ATTR_IE
 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
 #define NL80211_ATTR_SSID NL80211_ATTR_SSID
 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
 #define NL80211_ATTR_KEY NL80211_ATTR_KEY
 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
 
 #define NL80211_WIPHY_NAME_MAXLEN               64
 
 #define NL80211_MAX_SUPP_RATES                  32
 #define NL80211_MAX_SUPP_HT_RATES               77
 #define NL80211_MAX_SUPP_REG_RULES              128
 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY       0
 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY     16
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY     24
 #define NL80211_HT_CAPABILITY_LEN               26
 #define NL80211_VHT_CAPABILITY_LEN              12
 #define NL80211_HE_MIN_CAPABILITY_LEN           16
 #define NL80211_HE_MAX_CAPABILITY_LEN           54
 #define NL80211_MAX_NR_CIPHER_SUITES            5
 
 /*
  * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES
  * present in %NL80211_CMD_GET_WIPHY response.
  */
 #define NL80211_MAX_NR_AKM_SUITES               2
 #define NL80211_EHT_MIN_CAPABILITY_LEN          13
 #define NL80211_EHT_MAX_CAPABILITY_LEN          51
 
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME      10
 
 /* default RSSI threshold for scan results if none specified. */
 #define NL80211_SCAN_RSSI_THOLD_OFF             -300
 
 #define NL80211_CQM_TXE_MAX_INTVL               1800
 
 /**
  * enum nl80211_iftype - (virtual) interface types
  *
  * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
  * @NL80211_IFTYPE_ADHOC: independent BSS member
  * @NL80211_IFTYPE_STATION: managed BSS member
  * @NL80211_IFTYPE_AP: access point
  * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
  *      are a bit special in that they must always be tied to a pre-existing
  *      AP type interface.
  * @NL80211_IFTYPE_WDS: wireless distribution interface
  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
  * @NL80211_IFTYPE_MESH_POINT: mesh point
  * @NL80211_IFTYPE_P2P_CLIENT: P2P client
  * @NL80211_IFTYPE_P2P_GO: P2P group owner
  * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev
  *      and therefore can't be created in the normal ways, use the
  *      %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
  *      commands to create and destroy one
  * @NL80211_IFTYPE_OCB: Outside Context of a BSS
  *      This mode corresponds to the MIB variable dot11OCBActivated=true
  * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
  * These values are used with the %NL80211_ATTR_IFTYPE
  * to set the type of an interface.
  *
  */
 enum nl80211_iftype {
         NL80211_IFTYPE_UNSPECIFIED,
         NL80211_IFTYPE_ADHOC,
         NL80211_IFTYPE_STATION,
         NL80211_IFTYPE_AP,
         NL80211_IFTYPE_AP_VLAN,
         NL80211_IFTYPE_WDS,
         NL80211_IFTYPE_MONITOR,
         NL80211_IFTYPE_MESH_POINT,
         NL80211_IFTYPE_P2P_CLIENT,
         NL80211_IFTYPE_P2P_GO,
         NL80211_IFTYPE_P2P_DEVICE,
         NL80211_IFTYPE_OCB,
         NL80211_IFTYPE_NAN,
 
         /* keep last */
         NUM_NL80211_IFTYPES,
         NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
 };
 
 /**
  * enum nl80211_sta_flags - station flags
  *
  * Station flags. When a station is added to an AP interface, it is
  * assumed to be already associated (and hence authenticated.)
  *
  * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
  * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
  * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
  *      with short barker preamble
  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
  * @NL80211_STA_FLAG_MFP: station uses management frame protection
  * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
  * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
  *      only be used in managed mode (even in the flags mask). Note that the
  *      flag can't be changed, it is only valid while adding a station, and
  *      attempts to change it will silently be ignored (rather than rejected
  *      as errors.)
  * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
  *      that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
  *      previously added station into associated state
  * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
 enum nl80211_sta_flags {
         __NL80211_STA_FLAG_INVALID,
         NL80211_STA_FLAG_AUTHORIZED,
         NL80211_STA_FLAG_SHORT_PREAMBLE,
         NL80211_STA_FLAG_WME,
         NL80211_STA_FLAG_MFP,
         NL80211_STA_FLAG_AUTHENTICATED,
         NL80211_STA_FLAG_TDLS_PEER,
         NL80211_STA_FLAG_ASSOCIATED,
         NL80211_STA_FLAG_SPP_AMSDU,
 
         /* keep last */
         __NL80211_STA_FLAG_AFTER_LAST,
         NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_sta_p2p_ps_status - station support of P2P PS
  *
  * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism
  * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism
  * @NUM_NL80211_P2P_PS_STATUS: number of values
  */
 enum nl80211_sta_p2p_ps_status {
         NL80211_P2P_PS_UNSUPPORTED = 0,
         NL80211_P2P_PS_SUPPORTED,
 
         NUM_NL80211_P2P_PS_STATUS,
 };
 
 #define NL80211_STA_FLAG_MAX_OLD_API    NL80211_STA_FLAG_TDLS_PEER
 
 /**
  * struct nl80211_sta_flag_update - station flags mask/set
  * @mask: mask of station flags to set
  * @set: which values to set them to
  *
  * Both mask and set contain bits as per &enum nl80211_sta_flags.
  */
 struct nl80211_sta_flag_update {
         __u32 mask;
         __u32 set;
 } __attribute__((packed));
 
 /**
  * enum nl80211_he_gi - HE guard interval
  * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
  * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
  * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
  */
 enum nl80211_he_gi {
         NL80211_RATE_INFO_HE_GI_0_8,
         NL80211_RATE_INFO_HE_GI_1_6,
         NL80211_RATE_INFO_HE_GI_3_2,
 };
 
 /**
  * enum nl80211_he_ltf - HE long training field
  * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec
  * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec
  * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec
  */
 enum nl80211_he_ltf {
         NL80211_RATE_INFO_HE_1XLTF,
         NL80211_RATE_INFO_HE_2XLTF,
         NL80211_RATE_INFO_HE_4XLTF,
 };
 
 /**
  * enum nl80211_he_ru_alloc - HE RU allocation values
  * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
  * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
  */
 enum nl80211_he_ru_alloc {
         NL80211_RATE_INFO_HE_RU_ALLOC_26,
         NL80211_RATE_INFO_HE_RU_ALLOC_52,
         NL80211_RATE_INFO_HE_RU_ALLOC_106,
         NL80211_RATE_INFO_HE_RU_ALLOC_242,
         NL80211_RATE_INFO_HE_RU_ALLOC_484,
         NL80211_RATE_INFO_HE_RU_ALLOC_996,
         NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
 };
 
 /**
  * enum nl80211_eht_gi - EHT guard interval
  * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec
  * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec
  * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec
  */
 enum nl80211_eht_gi {
         NL80211_RATE_INFO_EHT_GI_0_8,
         NL80211_RATE_INFO_EHT_GI_1_6,
         NL80211_RATE_INFO_EHT_GI_3_2,
 };
 
 /**
  * enum nl80211_eht_ru_alloc - EHT RU allocation values
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation
  */
 enum nl80211_eht_ru_alloc {
         NL80211_RATE_INFO_EHT_RU_ALLOC_26,
         NL80211_RATE_INFO_EHT_RU_ALLOC_52,
         NL80211_RATE_INFO_EHT_RU_ALLOC_52P26,
         NL80211_RATE_INFO_EHT_RU_ALLOC_106,
         NL80211_RATE_INFO_EHT_RU_ALLOC_106P26,
         NL80211_RATE_INFO_EHT_RU_ALLOC_242,
         NL80211_RATE_INFO_EHT_RU_ALLOC_484,
         NL80211_RATE_INFO_EHT_RU_ALLOC_484P242,
         NL80211_RATE_INFO_EHT_RU_ALLOC_996,
         NL80211_RATE_INFO_EHT_RU_ALLOC_996P484,
         NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242,
         NL80211_RATE_INFO_EHT_RU_ALLOC_2x996,
         NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484,
         NL80211_RATE_INFO_EHT_RU_ALLOC_3x996,
         NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484,
         NL80211_RATE_INFO_EHT_RU_ALLOC_4x996,
 };
 
 /**
  * enum nl80211_rate_info - bitrate information
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
  * when getting information about the bitrate of a station.
  * There are 2 attributes for bitrate, a legacy one that represents
  * a 16-bit value, and new one that represents a 32-bit value.
  * If the rate value fits into 16 bit, both attributes are reported
  * with the same value. If the rate is too high to fit into 16 bits
  * (>6.5535Gbps) only 32-bit attribute is included.
  * User space tools encouraged to use the 32-bit attribute and fall
  * back to the 16-bit one for compatibility with older kernels.
  *
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
  * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
  * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
  * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
  * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
  * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
  *      same as 160 for purposes of the bitrates
  * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
  * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
  *      a legacy rate and will be reported as the actual bitrate, i.e.
  *      half the base (20 MHz) rate
  * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
  *      a legacy rate and will be reported as the actual bitrate, i.e.
  *      a quarter of the base (20 MHz) rate
  * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
  * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
  * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
  *      (u8, see &enum nl80211_he_gi)
  * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
  * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then
  *      non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
  * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
  * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8)
  * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier
  *      (u8, see &enum nl80211_eht_gi)
  * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
  *      non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
  * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)
  * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)
  * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate
  * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate
  * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
  * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
  * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
         __NL80211_RATE_INFO_INVALID,
         NL80211_RATE_INFO_BITRATE,
         NL80211_RATE_INFO_MCS,
         NL80211_RATE_INFO_40_MHZ_WIDTH,
         NL80211_RATE_INFO_SHORT_GI,
         NL80211_RATE_INFO_BITRATE32,
         NL80211_RATE_INFO_VHT_MCS,
         NL80211_RATE_INFO_VHT_NSS,
         NL80211_RATE_INFO_80_MHZ_WIDTH,
         NL80211_RATE_INFO_80P80_MHZ_WIDTH,
         NL80211_RATE_INFO_160_MHZ_WIDTH,
         NL80211_RATE_INFO_10_MHZ_WIDTH,
         NL80211_RATE_INFO_5_MHZ_WIDTH,
         NL80211_RATE_INFO_HE_MCS,
         NL80211_RATE_INFO_HE_NSS,
         NL80211_RATE_INFO_HE_GI,
         NL80211_RATE_INFO_HE_DCM,
         NL80211_RATE_INFO_HE_RU_ALLOC,
         NL80211_RATE_INFO_320_MHZ_WIDTH,
         NL80211_RATE_INFO_EHT_MCS,
         NL80211_RATE_INFO_EHT_NSS,
         NL80211_RATE_INFO_EHT_GI,
         NL80211_RATE_INFO_EHT_RU_ALLOC,
         NL80211_RATE_INFO_S1G_MCS,
         NL80211_RATE_INFO_S1G_NSS,
         NL80211_RATE_INFO_1_MHZ_WIDTH,
         NL80211_RATE_INFO_2_MHZ_WIDTH,
         NL80211_RATE_INFO_4_MHZ_WIDTH,
         NL80211_RATE_INFO_8_MHZ_WIDTH,
         NL80211_RATE_INFO_16_MHZ_WIDTH,
 
         /* keep last */
         __NL80211_RATE_INFO_AFTER_LAST,
         NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_sta_bss_param - BSS information collected by STA
  *
  * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
  * when getting information about the bitrate of a station.
  *
  * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
  * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
  * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
  *      (flag)
  * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
  *      (flag)
  * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
  * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
  * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
  * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
  */
 enum nl80211_sta_bss_param {
         __NL80211_STA_BSS_PARAM_INVALID,
         NL80211_STA_BSS_PARAM_CTS_PROT,
         NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
         NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
         NL80211_STA_BSS_PARAM_DTIM_PERIOD,
         NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
 
         /* keep last */
         __NL80211_STA_BSS_PARAM_AFTER_LAST,
         NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_sta_info - station information
  *
  * These attribute types are used with %NL80211_ATTR_STA_INFO
  * when getting information about a station.
  *
  * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
  * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
  *      (u32, from this station)
  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
  *      (u32, to this station)
  * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
  *      (u64, from this station)
  * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
  *      (u64, to this station)
  * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
  * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
  *      containing info as possible, see &enum nl80211_rate_info
  * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
  *      (u32, from this station)
  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
  *      (u32, to this station)
  * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
  * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
  *      (u32, to this station)
  * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
  * @NL80211_STA_INFO_LLID: the station's mesh LLID
  * @NL80211_STA_INFO_PLID: the station's mesh PLID
  * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
  *      (see %enum nl80211_plink_state)
  * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
  *      attribute, like NL80211_STA_INFO_TX_BITRATE.
  * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
  *     containing info as possible, see &enum nl80211_sta_bss_param
  * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
  * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
  * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
  * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
  *      non-peer STA
  * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
  *      Contains a nested array of signal strength attributes (u8, dBm)
  * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
  *      Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
  * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also
  *      the 802.11 header (u32, kbps)
  * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
  *      (u64)
  * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
  * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
  *      for beacons only (u8, dBm)
  * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
  *      This is a nested attribute where each the inner attribute number is the
  *      TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
  *      each one of those is again nested with &enum nl80211_tid_stats
  *      attributes carrying the actual values.
  * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
  *      received from the station (u64, usec)
  * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
  * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
  * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
  *      (u32, from this station)
  * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
  *      with an FCS error (u32, from this station). This count may not include
  *      some packets with an FCS error due to TA corruption. Hence this counter
  *      might not be fully accurate.
  * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
  *      mesh gate (u8, 0 or 1)
  * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
  *      sent to the station (u64, usec)
  * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
  * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
  * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
  *      of STA's association
  * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a
  *      authentication server (u8, 0 or 1)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
 enum nl80211_sta_info {
         __NL80211_STA_INFO_INVALID,
         NL80211_STA_INFO_INACTIVE_TIME,
         NL80211_STA_INFO_RX_BYTES,
         NL80211_STA_INFO_TX_BYTES,
         NL80211_STA_INFO_LLID,
         NL80211_STA_INFO_PLID,
         NL80211_STA_INFO_PLINK_STATE,
         NL80211_STA_INFO_SIGNAL,
         NL80211_STA_INFO_TX_BITRATE,
         NL80211_STA_INFO_RX_PACKETS,
         NL80211_STA_INFO_TX_PACKETS,
         NL80211_STA_INFO_TX_RETRIES,
         NL80211_STA_INFO_TX_FAILED,
         NL80211_STA_INFO_SIGNAL_AVG,
         NL80211_STA_INFO_RX_BITRATE,
         NL80211_STA_INFO_BSS_PARAM,
         NL80211_STA_INFO_CONNECTED_TIME,
         NL80211_STA_INFO_STA_FLAGS,
         NL80211_STA_INFO_BEACON_LOSS,
         NL80211_STA_INFO_T_OFFSET,
         NL80211_STA_INFO_LOCAL_PM,
         NL80211_STA_INFO_PEER_PM,
         NL80211_STA_INFO_NONPEER_PM,
         NL80211_STA_INFO_RX_BYTES64,
         NL80211_STA_INFO_TX_BYTES64,
         NL80211_STA_INFO_CHAIN_SIGNAL,
         NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
         NL80211_STA_INFO_EXPECTED_THROUGHPUT,
         NL80211_STA_INFO_RX_DROP_MISC,
         NL80211_STA_INFO_BEACON_RX,
         NL80211_STA_INFO_BEACON_SIGNAL_AVG,
         NL80211_STA_INFO_TID_STATS,
         NL80211_STA_INFO_RX_DURATION,
         NL80211_STA_INFO_PAD,
         NL80211_STA_INFO_ACK_SIGNAL,
         NL80211_STA_INFO_ACK_SIGNAL_AVG,
         NL80211_STA_INFO_RX_MPDUS,
         NL80211_STA_INFO_FCS_ERROR_COUNT,
         NL80211_STA_INFO_CONNECTED_TO_GATE,
         NL80211_STA_INFO_TX_DURATION,
         NL80211_STA_INFO_AIRTIME_WEIGHT,
         NL80211_STA_INFO_AIRTIME_LINK_METRIC,
         NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
         NL80211_STA_INFO_CONNECTED_TO_AS,
 
         /* keep last */
         __NL80211_STA_INFO_AFTER_LAST,
         NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
 };
 
 /* we renamed this - stay compatible */
 #define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
 
 
 /**
  * enum nl80211_tid_stats - per TID statistics attributes
  * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
  * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
  * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
  *      attempted to transmit; u64)
  * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
  *      transmitted MSDUs (not counting the first attempt; u64)
  * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
  *      MSDUs (u64)
  * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
  * @NUM_NL80211_TID_STATS: number of attributes here
  * @NL80211_TID_STATS_MAX: highest numbered attribute here
  */
 enum nl80211_tid_stats {
         __NL80211_TID_STATS_INVALID,
         NL80211_TID_STATS_RX_MSDU,
         NL80211_TID_STATS_TX_MSDU,
         NL80211_TID_STATS_TX_MSDU_RETRIES,
         NL80211_TID_STATS_TX_MSDU_FAILED,
         NL80211_TID_STATS_PAD,
         NL80211_TID_STATS_TXQ_STATS,
 
         /* keep last */
         NUM_NL80211_TID_STATS,
         NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
 };
 
 /**
  * enum nl80211_txq_stats - per TXQ statistics attributes
  * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
  * @NUM_NL80211_TXQ_STATS: number of attributes here
  * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged
  * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently
  *      backlogged
  * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen
  * @NL80211_TXQ_STATS_DROPS: total number of packet drops
  * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks
  * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow
  * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow
  *      (only for per-phy stats)
  * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions
  * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ
  * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ
  * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY
  * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
  */
 enum nl80211_txq_stats {
         __NL80211_TXQ_STATS_INVALID,
         NL80211_TXQ_STATS_BACKLOG_BYTES,
         NL80211_TXQ_STATS_BACKLOG_PACKETS,
         NL80211_TXQ_STATS_FLOWS,
         NL80211_TXQ_STATS_DROPS,
         NL80211_TXQ_STATS_ECN_MARKS,
         NL80211_TXQ_STATS_OVERLIMIT,
         NL80211_TXQ_STATS_OVERMEMORY,
         NL80211_TXQ_STATS_COLLISIONS,
         NL80211_TXQ_STATS_TX_BYTES,
         NL80211_TXQ_STATS_TX_PACKETS,
         NL80211_TXQ_STATS_MAX_FLOWS,
 
         /* keep last */
         NUM_NL80211_TXQ_STATS,
         NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1
 };
 
 /**
  * enum nl80211_mpath_flags - nl80211 mesh path flags
  *
  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
  * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
  * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
  * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
  * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
  */
 enum nl80211_mpath_flags {
         NL80211_MPATH_FLAG_ACTIVE =     1<<0,
         NL80211_MPATH_FLAG_RESOLVING =  1<<1,
         NL80211_MPATH_FLAG_SN_VALID =   1<<2,
         NL80211_MPATH_FLAG_FIXED =      1<<3,
         NL80211_MPATH_FLAG_RESOLVED =   1<<4,
 };
 
 /**
  * enum nl80211_mpath_info - mesh path information
  *
  * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
  * information about a mesh path.
  *
  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
  * @NL80211_MPATH_INFO_SN: destination sequence number
  * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
  * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
  *      &enum nl80211_mpath_flags;
  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
  * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
  * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
  * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
  *      currently defined
  * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
  */
 enum nl80211_mpath_info {
         __NL80211_MPATH_INFO_INVALID,
         NL80211_MPATH_INFO_FRAME_QLEN,
         NL80211_MPATH_INFO_SN,
         NL80211_MPATH_INFO_METRIC,
         NL80211_MPATH_INFO_EXPTIME,
         NL80211_MPATH_INFO_FLAGS,
         NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
         NL80211_MPATH_INFO_DISCOVERY_RETRIES,
         NL80211_MPATH_INFO_HOP_COUNT,
         NL80211_MPATH_INFO_PATH_CHANGE,
 
         /* keep last */
         __NL80211_MPATH_INFO_AFTER_LAST,
         NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_band_iftype_attr - Interface type data attributes
  *
  * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
  *     for each interface type that supports the band data
  * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
  *     capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
  *     capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
  *     capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
  *     defined in HE capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
  *      given for all 6 GHz band channels
  * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
  *      advertised on this band/for this iftype (binary)
  * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT
  *      capabilities element
  * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT
  *      capabilities element
  * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT
  *      capabilities element
  * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as
  *      defined in EHT capabilities element
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
  * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
  */
 enum nl80211_band_iftype_attr {
         __NL80211_BAND_IFTYPE_ATTR_INVALID,
 
         NL80211_BAND_IFTYPE_ATTR_IFTYPES,
         NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
         NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
         NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
         NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
         NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
         NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
         NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC,
         NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
         NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
         NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
 
         /* keep last */
         __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
         NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_band_attr - band attributes
  * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
  *      an array of nested frequency attributes
  * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
  *      an array of nested bitrate attributes
  * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
  *      defined in 802.11n
  * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
  * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
  * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
  *      defined in 802.11ac
  * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
  *      attributes from &enum nl80211_band_iftype_attr
  * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
  *      channel(s) that are allowed to be used for EDMG transmissions.
  *      Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
  * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
  *      the allowed channel bandwidth configurations.
  *      Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
  * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS
  *      set subfield, as in the S1G information IE, 5 bytes
  * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the
  *      S1G information IE, 10 bytes
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_band_attr {
         __NL80211_BAND_ATTR_INVALID,
         NL80211_BAND_ATTR_FREQS,
         NL80211_BAND_ATTR_RATES,
 
         NL80211_BAND_ATTR_HT_MCS_SET,
         NL80211_BAND_ATTR_HT_CAPA,
         NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
         NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
 
         NL80211_BAND_ATTR_VHT_MCS_SET,
         NL80211_BAND_ATTR_VHT_CAPA,
         NL80211_BAND_ATTR_IFTYPE_DATA,
 
         NL80211_BAND_ATTR_EDMG_CHANNELS,
         NL80211_BAND_ATTR_EDMG_BW_CONFIG,
 
         NL80211_BAND_ATTR_S1G_MCS_NSS_SET,
         NL80211_BAND_ATTR_S1G_CAPA,
 
         /* keep last */
         __NL80211_BAND_ATTR_AFTER_LAST,
         NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
 };
 
 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
 
 /**
  * enum nl80211_wmm_rule - regulatory wmm rule
  *
  * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
  * @NL80211_WMMR_CW_MIN: Minimum contention window slot.
  * @NL80211_WMMR_CW_MAX: Maximum contention window slot.
  * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.
  * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.
  * @NL80211_WMMR_MAX: highest possible wmm rule.
  * @__NL80211_WMMR_LAST: Internal use.
  */
 enum nl80211_wmm_rule {
         __NL80211_WMMR_INVALID,
         NL80211_WMMR_CW_MIN,
         NL80211_WMMR_CW_MAX,
         NL80211_WMMR_AIFSN,
         NL80211_WMMR_TXOP,
 
         /* keep last */
         __NL80211_WMMR_LAST,
         NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1
 };
 
 /**
  * enum nl80211_frequency_attr - frequency attributes
  * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
  *      regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation
  *      are permitted on this channel, this includes sending probe
  *      requests, or modes of operation that require beaconing.
  * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR
  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
  *      (100 * dBm).
  * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
  *      (enum nl80211_dfs_state)
  * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
  *      this channel is in this DFS state.
  * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
  *      channel as the control channel
  * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this
  *      channel as the control channel
  * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel
  *      as the primary or any of the secondary channels isn't possible,
  *      this includes 80+80 channels
  * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
  *      using this channel as the primary or any of the secondary channels
  *      isn't possible
  * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
  *      channel. A channel that has the INDOOR_ONLY attribute can only be
  *      used when there is a clear assessment that the device is operating in
  *      an indoor surroundings, i.e., it is connected to AC power (and not
  *      through portable DC inverters) or is under the control of a master
  *      that is acting as an AP and is connected to AC power.
  * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
  *      channel if it's connected concurrently to a BSS on the same channel on
  *      the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
  *      band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
  *      off-channel on a channel that has the IR_CONCURRENT attribute set can be
  *      done when there is a clear assessment that the device is operating under
  *      the guidance of an authorized master, i.e., setting up a GO or TDLS
  *      off-channel while the device is also connected to an AP with DFS and
  *      radar detection on the UNII band (it is up to user-space, i.e.,
  *      wpa_supplicant to perform the required verifications). Using this
  *      attribute for IR is disallowed for master interfaces (IBSS, AP).
  * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
  *      This is a nested attribute that contains the wmm limitation per AC.
  *      (see &enum nl80211_wmm_rule)
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *      in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
  * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
  *      on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel
  *      as the primary or any of the secondary channels isn't possible
  * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
  *      in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
  *      is allowed on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
  *      allowed for peer-to-peer or adhoc communication under the control
  *      of a DFS master which operates on the same channel (FCC-594280 D01
  *      Section B.3). Should be used together with %NL80211_RRF_DFS only.
  * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
  *      not allowed using this channel
  * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
  *      not allowed using this channel
  * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
  *      mode despite other (regulatory) restrictions, even if the channel is
  *      otherwise completely disabled.
  * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a
  *      very low power (VLP) AP, despite being NO_IR.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *      currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
  *
  * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
  * for more information on the FCC description of the relaxations allowed
  * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
  * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
  */
 enum nl80211_frequency_attr {
         __NL80211_FREQUENCY_ATTR_INVALID,
         NL80211_FREQUENCY_ATTR_FREQ,
         NL80211_FREQUENCY_ATTR_DISABLED,
         NL80211_FREQUENCY_ATTR_NO_IR,
         __NL80211_FREQUENCY_ATTR_NO_IBSS,
         NL80211_FREQUENCY_ATTR_RADAR,
         NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
         NL80211_FREQUENCY_ATTR_DFS_STATE,
         NL80211_FREQUENCY_ATTR_DFS_TIME,
         NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,
         NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
         NL80211_FREQUENCY_ATTR_NO_80MHZ,
         NL80211_FREQUENCY_ATTR_NO_160MHZ,
         NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
         NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
         NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
         NL80211_FREQUENCY_ATTR_NO_20MHZ,
         NL80211_FREQUENCY_ATTR_NO_10MHZ,
         NL80211_FREQUENCY_ATTR_WMM,
         NL80211_FREQUENCY_ATTR_NO_HE,
         NL80211_FREQUENCY_ATTR_OFFSET,
         NL80211_FREQUENCY_ATTR_1MHZ,
         NL80211_FREQUENCY_ATTR_2MHZ,
         NL80211_FREQUENCY_ATTR_4MHZ,
         NL80211_FREQUENCY_ATTR_8MHZ,
         NL80211_FREQUENCY_ATTR_16MHZ,
         NL80211_FREQUENCY_ATTR_NO_320MHZ,
         NL80211_FREQUENCY_ATTR_NO_EHT,
         NL80211_FREQUENCY_ATTR_PSD,
         NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
         NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
         NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
         NL80211_FREQUENCY_ATTR_CAN_MONITOR,
         NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,
 
         /* keep last */
         __NL80211_FREQUENCY_ATTR_AFTER_LAST,
         NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
 };
 
 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
 #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN     NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_NO_IBSS          NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_NO_IR            NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
                                         NL80211_FREQUENCY_ATTR_IR_CONCURRENT
 #define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
         NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
 #define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
         NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
  * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
  * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
  *      in 2.4 GHz band.
  * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
  *      currently defined
  * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_bitrate_attr {
         __NL80211_BITRATE_ATTR_INVALID,
         NL80211_BITRATE_ATTR_RATE,
         NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
 
         /* keep last */
         __NL80211_BITRATE_ATTR_AFTER_LAST,
         NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request
  * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
  *      regulatory domain.
  * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
  *      regulatory domain.
  * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
  *      wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
  *      802.11 country information element with regulatory information it
  *      thinks we should consider. cfg80211 only processes the country
  *      code from the IE, and relies on the regulatory domain information
  *      structure passed by userspace (CRDA) from our wireless-regdb.
  *      If a channel is enabled but the country code indicates it should
  *      be disabled we disable the channel and re-enable it upon disassociation.
  */
 enum nl80211_reg_initiator {
         NL80211_REGDOM_SET_BY_CORE,
         NL80211_REGDOM_SET_BY_USER,
         NL80211_REGDOM_SET_BY_DRIVER,
         NL80211_REGDOM_SET_BY_COUNTRY_IE,
 };
 
 /**
  * enum nl80211_reg_type - specifies the type of regulatory domain
  * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
  *      to a specific country. When this is set you can count on the
  *      ISO / IEC 3166 alpha2 country code being valid.
  * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
  *      domain.
  * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
  *      driver specific world regulatory domain. These do not apply system-wide
  *      and are only applicable to the individual devices which have requested
  *      them to be applied.
  * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
  *      of an intersection between two regulatory domains -- the previously
  *      set regulatory domain on the system and the last accepted regulatory
  *      domain request to be processed.
  */
 enum nl80211_reg_type {
         NL80211_REGDOM_TYPE_COUNTRY,
         NL80211_REGDOM_TYPE_WORLD,
         NL80211_REGDOM_TYPE_CUSTOM_WORLD,
         NL80211_REGDOM_TYPE_INTERSECTION,
 };
 
 /**
  * enum nl80211_reg_rule_attr - regulatory rule attributes
  * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
  *      considerations for a given frequency range. These are the
  *      &enum nl80211_reg_rule_flags.
  * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
  *      rule in KHz. This is not a center of frequency but an actual regulatory
  *      band edge.
  * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
  *      in KHz. This is not a center a frequency but an actual regulatory
  *      band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
  *      frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
  *      for a given frequency range. The value is in mBi (100 * dBi).
  *      If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
  *      a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *      If not present or 0 default CAC time will be used.
  * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
  *      This could be negative.
  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
  *      currently defined
  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_reg_rule_attr {
         __NL80211_REG_RULE_ATTR_INVALID,
         NL80211_ATTR_REG_RULE_FLAGS,
 
         NL80211_ATTR_FREQ_RANGE_START,
         NL80211_ATTR_FREQ_RANGE_END,
         NL80211_ATTR_FREQ_RANGE_MAX_BW,
 
         NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
         NL80211_ATTR_POWER_RULE_MAX_EIRP,
 
         NL80211_ATTR_DFS_CAC_TIME,
 
         NL80211_ATTR_POWER_RULE_PSD,
 
         /* keep last */
         __NL80211_REG_RULE_ATTR_AFTER_LAST,
         NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
  *      only report BSS with matching SSID.
  *      (This cannot be used together with BSSID.)
  * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
  *      BSS in scan results. Filtering is turned off if not specified. Note that
  *      if this attribute is in a match set of its own, then it is treated as
  *      the default value for all matchsets with an SSID, rather than being a
  *      matchset of its own without an RSSI filter. This is due to problems with
  *      how this API was implemented in the past. Also, due to the same problem,
  *      the only way to create a matchset with only an RSSI filter (with this
  *      attribute) is if there's only a single matchset with the RSSI attribute.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
  *      %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
  *      relative to current bss's RSSI.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
  *      BSS-es in the specified band is to be adjusted before doing
  *      RSSI-based BSS selection. The attribute value is a packed structure
  *      value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
  *      (this cannot be used together with SSID).
  * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *      attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_sched_scan_match_attr {
         __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
 
         NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
         NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
         NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
         NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
         NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
         NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
 
         /* keep last */
         __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
         NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
                 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
 };
 
 /* only for backward compatibility */
 #define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID
 
 /**
  * enum nl80211_reg_rule_flags - regulatory rule flags
  *
  * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
  * @NL80211_RRF_NO_CCK: CCK modulation not allowed
  * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
  * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
  * @NL80211_RRF_DFS: DFS support is required to be used
  * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
  * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
  *      this includes probe requests or modes of operation that require
  *      beaconing.
  * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *      base on contiguous rules and wider channels will be allowed to cross
  *      multiple contiguous/overlapping frequency ranges.
  * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
  * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
  * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
  * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
  *      peer-to-peer or adhoc communication under the control of a DFS master
  *      which operates on the same channel (FCC-594280 D01 Section B.3).
  *      Should be used together with %NL80211_RRF_DFS only.
  * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
  * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
  * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted
  *      despite NO_IR configuration.
  */
 enum nl80211_reg_rule_flags {
         NL80211_RRF_NO_OFDM             = 1<<0,
         NL80211_RRF_NO_CCK              = 1<<1,
         NL80211_RRF_NO_INDOOR           = 1<<2,
         NL80211_RRF_NO_OUTDOOR          = 1<<3,
         NL80211_RRF_DFS                 = 1<<4,
         NL80211_RRF_PTP_ONLY            = 1<<5,
         NL80211_RRF_PTMP_ONLY           = 1<<6,
         NL80211_RRF_NO_IR               = 1<<7,
         __NL80211_RRF_NO_IBSS           = 1<<8,
         NL80211_RRF_AUTO_BW             = 1<<11,
         NL80211_RRF_IR_CONCURRENT       = 1<<12,
         NL80211_RRF_NO_HT40MINUS        = 1<<13,
         NL80211_RRF_NO_HT40PLUS         = 1<<14,
         NL80211_RRF_NO_80MHZ            = 1<<15,
         NL80211_RRF_NO_160MHZ           = 1<<16,
         NL80211_RRF_NO_HE               = 1<<17,
         NL80211_RRF_NO_320MHZ           = 1<<18,
         NL80211_RRF_NO_EHT              = 1<<19,
         NL80211_RRF_PSD                 = 1<<20,
         NL80211_RRF_DFS_CONCURRENT      = 1<<21,
         NL80211_RRF_NO_6GHZ_VLP_CLIENT  = 1<<22,
         NL80211_RRF_NO_6GHZ_AFC_CLIENT  = 1<<23,
         NL80211_RRF_ALLOW_6GHZ_VLP_AP   = 1<<24,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN        NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_IBSS             NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_IR               NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_HT40             (NL80211_RRF_NO_HT40MINUS |\
                                          NL80211_RRF_NO_HT40PLUS)
 #define NL80211_RRF_GO_CONCURRENT       NL80211_RRF_IR_CONCURRENT
 #define NL80211_RRF_NO_UHB_VLP_CLIENT   NL80211_RRF_NO_6GHZ_VLP_CLIENT
 #define NL80211_RRF_NO_UHB_AFC_CLIENT   NL80211_RRF_NO_6GHZ_AFC_CLIENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL           (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
 
 /**
  * enum nl80211_dfs_regions - regulatory DFS regions
  *
  * @NL80211_DFS_UNSET: Country has no DFS master region specified
  * @NL80211_DFS_FCC: Country follows DFS master rules from FCC
  * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI
  * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec
  */
 enum nl80211_dfs_regions {
         NL80211_DFS_UNSET       = 0,
         NL80211_DFS_FCC         = 1,
         NL80211_DFS_ETSI        = 2,
         NL80211_DFS_JP          = 3,
 };
 
 /**
  * enum nl80211_user_reg_hint_type - type of user regulatory hint
  *
  * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always
  *      assumed if the attribute is not set.
  * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular
  *      base station. Device drivers that have been tested to work
  *      properly to support this type of hint can enable these hints
  *      by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature
  *      capability on the struct wiphy. The wireless core will
  *      ignore all cell base station hints until at least one device
  *      present has been registered with the wireless core that
  *      has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
  *      supported feature.
  * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
  *      platform is operating in an indoor environment.
  */
 enum nl80211_user_reg_hint_type {
         NL80211_USER_REG_HINT_USER      = 0,
         NL80211_USER_REG_HINT_CELL_BASE = 1,
         NL80211_USER_REG_HINT_INDOOR    = 2,
 };
 
 /**
  * enum nl80211_survey_info - survey information
  *
  * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
  * when getting information about a survey.
  *
  * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
  * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
  * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
  *      was turned on (on channel or globally)
  * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
  *      channel was sensed busy (either due to activity or energy detect)
  * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
  *      channel was sensed busy
  * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
  *      receiving data (on channel or globally)
  * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
  *      transmitting data (on channel or globally)
  * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
  *      (on this channel or globally)
  * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
  *      receiving frames destined to the local BSS
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *      currently defined
  * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
  */
 enum nl80211_survey_info {
         __NL80211_SURVEY_INFO_INVALID,
         NL80211_SURVEY_INFO_FREQUENCY,
         NL80211_SURVEY_INFO_NOISE,
         NL80211_SURVEY_INFO_IN_USE,
         NL80211_SURVEY_INFO_TIME,
         NL80211_SURVEY_INFO_TIME_BUSY,
         NL80211_SURVEY_INFO_TIME_EXT_BUSY,
         NL80211_SURVEY_INFO_TIME_RX,
         NL80211_SURVEY_INFO_TIME_TX,
         NL80211_SURVEY_INFO_TIME_SCAN,
         NL80211_SURVEY_INFO_PAD,
         NL80211_SURVEY_INFO_TIME_BSS_RX,
         NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
 
         /* keep last */
         __NL80211_SURVEY_INFO_AFTER_LAST,
         NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
 };
 
 /* keep old names for compatibility */
 #define NL80211_SURVEY_INFO_CHANNEL_TIME                NL80211_SURVEY_INFO_TIME
 #define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY           NL80211_SURVEY_INFO_TIME_BUSY
 #define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY       NL80211_SURVEY_INFO_TIME_EXT_BUSY
 #define NL80211_SURVEY_INFO_CHANNEL_TIME_RX             NL80211_SURVEY_INFO_TIME_RX
 #define NL80211_SURVEY_INFO_CHANNEL_TIME_TX             NL80211_SURVEY_INFO_TIME_TX
 
 /**
  * enum nl80211_mntr_flags - monitor configuration flags
  *
  * Monitor configuration flags.
  *
  * @__NL80211_MNTR_FLAG_INVALID: reserved
  *
  * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
  * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
  * @NL80211_MNTR_FLAG_CONTROL: pass control frames
  * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
  * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
  *      overrides all other flags.
  * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
  *      and ACK incoming unicast packets.
  *
  * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
  * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
  */
 enum nl80211_mntr_flags {
         __NL80211_MNTR_FLAG_INVALID,
         NL80211_MNTR_FLAG_FCSFAIL,
         NL80211_MNTR_FLAG_PLCPFAIL,
         NL80211_MNTR_FLAG_CONTROL,
         NL80211_MNTR_FLAG_OTHER_BSS,
         NL80211_MNTR_FLAG_COOK_FRAMES,
         NL80211_MNTR_FLAG_ACTIVE,
 
         /* keep last */
         __NL80211_MNTR_FLAG_AFTER_LAST,
         NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_mesh_power_mode - mesh power save modes
  *
  * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
  *      not known or has not been set yet.
  * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
  *      in Awake state all the time.
  * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
  *      alternate between Active and Doze states, but will wake up for
  *      neighbor's beacons.
  * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
  *      alternate between Active and Doze states, but may not wake up
  *      for neighbor's beacons.
  *
  * @__NL80211_MESH_POWER_AFTER_LAST: internal use
  * @NL80211_MESH_POWER_MAX: highest possible power save level
  */
 
 enum nl80211_mesh_power_mode {
         NL80211_MESH_POWER_UNKNOWN,
         NL80211_MESH_POWER_ACTIVE,
         NL80211_MESH_POWER_LIGHT_SLEEP,
         NL80211_MESH_POWER_DEEP_SLEEP,
 
         __NL80211_MESH_POWER_AFTER_LAST,
         NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
  * Mesh configuration parameters. These can be changed while the mesh is
  * active.
  *
  * @__NL80211_MESHCONF_INVALID: internal use
  *
  * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
  *      millisecond units, used by the Peer Link Open message
  *
  * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
  *      millisecond units, used by the peer link management to close a peer link
  *
  * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
  *      millisecond units
  *
  * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
  *      on this mesh interface
  *
  * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
  *      open retries that can be sent to establish a new peer link instance in a
  *      mesh
  *
  * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
  *      point.
  *
  * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
  *      peer links when we detect compatible mesh peers. Disabled if
  *      @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
  *      set.
  *
  * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
  *      containing a PREQ that an MP can send to a particular destination (path
  *      target)
  *
  * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
  *      (in milliseconds)
  *
  * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
  *      until giving up on a path discovery (in milliseconds)
  *
  * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
  *      points receiving a PREQ shall consider the forwarding information from
  *      the root to be valid. (TU = time unit)
  *
  * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
  *      TUs) during which an MP can send only one action frame containing a PREQ
  *      reference element
  *
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  *      that it takes for an HWMP information element to propagate across the
  *      mesh
  *
  * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
  *
  * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
  *      source mesh point for path selection elements.
  *
  * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
  *      root announcements are transmitted.
  *
  * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
  *      access to a broader network beyond the MBSS.  This is done via Root
  *      Announcement frames.
  *
  * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
  *      TUs) during which a mesh STA can send only one Action frame containing a
  *      PERR element.
  *
  * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
  *      or forwarding entity (default is TRUE - forwarding entity)
  *
  * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
  *      threshold for average signal strength of candidate station to establish
  *      a peer link.
  *
  * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
  *      to synchronize to for 11s default synchronization method
  *      (see 11C.12.2.2)
  *
  * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.
  *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for
  *      which mesh STAs receiving a proactive PREQ shall consider the forwarding
  *      information to the root mesh STA to be valid.
  *
  * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between
  *      proactive PREQs are transmitted.
  *
  * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time
  *      (in TUs) during which a mesh STA can send only one Action frame
  *      containing a PREQ element for root path confirmation.
  *
  * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
  *      type &enum nl80211_mesh_power_mode (u32)
  *
  * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
  *
  * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
  *      established peering with for longer than this time (in seconds), then
  *      remove it from the STA's list of peers. You may set this to 0 to disable
  *      the removal of the STA. Default is 30 minutes.
  *
  * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA
  *      will advertise that it is connected to a gate in the mesh formation
  *      field.  If left unset then the mesh formation field will only
  *      advertise such if there is an active root mesh path.
  *
  * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g.
  *      PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that
  *      this might not be the optimal decision as a multi-hop route might be
  *      better. So if using this setting you will likely also want to disable
  *      dot11MeshForwarding and use another mesh routing protocol on top.
  *
  * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA
  *      will advertise that it is connected to a authentication server
  *      in the mesh formation field.
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
         __NL80211_MESHCONF_INVALID,
         NL80211_MESHCONF_RETRY_TIMEOUT,
         NL80211_MESHCONF_CONFIRM_TIMEOUT,
         NL80211_MESHCONF_HOLDING_TIMEOUT,
         NL80211_MESHCONF_MAX_PEER_LINKS,
         NL80211_MESHCONF_MAX_RETRIES,
         NL80211_MESHCONF_TTL,
         NL80211_MESHCONF_AUTO_OPEN_PLINKS,
         NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
         NL80211_MESHCONF_PATH_REFRESH_TIME,
         NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
         NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
         NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
         NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
         NL80211_MESHCONF_HWMP_ROOTMODE,
         NL80211_MESHCONF_ELEMENT_TTL,
         NL80211_MESHCONF_HWMP_RANN_INTERVAL,
         NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
         NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
         NL80211_MESHCONF_FORWARDING,
         NL80211_MESHCONF_RSSI_THRESHOLD,
         NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
         NL80211_MESHCONF_HT_OPMODE,
         NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
         NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
         NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
         NL80211_MESHCONF_POWER_MODE,
         NL80211_MESHCONF_AWAKE_WINDOW,
         NL80211_MESHCONF_PLINK_TIMEOUT,
         NL80211_MESHCONF_CONNECTED_TO_GATE,
         NL80211_MESHCONF_NOLEARN,
         NL80211_MESHCONF_CONNECTED_TO_AS,
 
         /* keep last */
         __NL80211_MESHCONF_ATTR_AFTER_LAST,
         NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_mesh_setup_params - mesh setup parameters
  *
  * Mesh setup parameters.  These are used to start/join a mesh and cannot be
  * changed while the mesh is active.
  *
  * @__NL80211_MESH_SETUP_INVALID: Internal use
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
  *      vendor specific path selection algorithm or disable it to use the
  *      default HWMP.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
  *      vendor specific path metric or disable it to use the default Airtime
  *      metric.
  *
  * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
  *      robust security network ie, or a vendor specific information element
  *      that vendors will use to identify the path selection methods and
  *      metrics in use.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
  *      daemon will be authenticating mesh candidates.
  *
  * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
  *      daemon will be securing peer link frames.  AMPE is a secured version of
  *      Mesh Peering Management (MPM) and is implemented with the assistance of
  *      a userspace daemon.  When this flag is set, the kernel will send peer
  *      management frames to a userspace daemon that will implement AMPE
  *      functionality (security capabilities selection, key confirmation, and
  *      key management).  When the flag is unset (default), the kernel can
  *      autonomously complete (unsecured) mesh peering without the need of a
  *      userspace daemon.
  *
  * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
  *      vendor specific synchronization method or disable it to use the default
  *      neighbor offset synchronization
  *
  * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
  *      implement an MPM which handles peer allocation and state.
  *
  * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
  *      method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
  *      Default is no authentication method required.
  *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
  *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {
         __NL80211_MESH_SETUP_INVALID,
         NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
         NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
         NL80211_MESH_SETUP_IE,
         NL80211_MESH_SETUP_USERSPACE_AUTH,
         NL80211_MESH_SETUP_USERSPACE_AMPE,
         NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
         NL80211_MESH_SETUP_USERSPACE_MPM,
         NL80211_MESH_SETUP_AUTH_PROTOCOL,
 
         /* keep last */
         __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
         NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_txq_attr - TX queue parameter attributes
  * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
  * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
  * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
  *      disabled
  * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
  *      2^n-1 in the range 1..32767]
  * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
  *      2^n-1 in the range 1..32767]
  * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
  * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
  * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
  */
 enum nl80211_txq_attr {
         __NL80211_TXQ_ATTR_INVALID,
         NL80211_TXQ_ATTR_AC,
         NL80211_TXQ_ATTR_TXOP,
         NL80211_TXQ_ATTR_CWMIN,
         NL80211_TXQ_ATTR_CWMAX,
         NL80211_TXQ_ATTR_AIFS,
 
         /* keep last */
         __NL80211_TXQ_ATTR_AFTER_LAST,
         NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
 };
 
 enum nl80211_ac {
         NL80211_AC_VO,
         NL80211_AC_VI,
         NL80211_AC_BE,
         NL80211_AC_BK,
         NL80211_NUM_ACS
 };
 
 /* backward compat */
 #define NL80211_TXQ_ATTR_QUEUE  NL80211_TXQ_ATTR_AC
 #define NL80211_TXQ_Q_VO        NL80211_AC_VO
 #define NL80211_TXQ_Q_VI        NL80211_AC_VI
 #define NL80211_TXQ_Q_BE        NL80211_AC_BE
 #define NL80211_TXQ_Q_BK        NL80211_AC_BK
 
 /**
  * enum nl80211_channel_type - channel type
  * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel
  * @NL80211_CHAN_HT20: 20 MHz HT channel
  * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel
  *      below the control channel
  * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel
  *      above the control channel
  */
 enum nl80211_channel_type {
         NL80211_CHAN_NO_HT,
         NL80211_CHAN_HT20,
         NL80211_CHAN_HT40MINUS,
         NL80211_CHAN_HT40PLUS
 };
 
 /**
  * enum nl80211_key_mode - Key mode
  *
  * @NL80211_KEY_RX_TX: (Default)
  *      Key can be used for Rx and Tx immediately
  *
  * The following modes can only be selected for unicast keys and when the
  * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
  *
  * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
  *      Unicast key can only be used for Rx, Tx not allowed, yet
  * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
  *      The unicast key identified by idx and mac is cleared for Tx and becomes
  *      the preferred Tx key for the station.
  */
 enum nl80211_key_mode {
         NL80211_KEY_RX_TX,
         NL80211_KEY_NO_TX,
         NL80211_KEY_SET_TX
 };
 
 /**
  * enum nl80211_chan_width - channel width definitions
  *
  * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
  * attribute.
  *
  * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel
  * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel
  * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
  *      attribute must be provided as well
  * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
  *      attribute must be provided as well
  * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
  *      and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
  * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
  *      attribute must be provided as well
  * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
  *      attribute must be provided as well
  */
 enum nl80211_chan_width {
         NL80211_CHAN_WIDTH_20_NOHT,
         NL80211_CHAN_WIDTH_20,
         NL80211_CHAN_WIDTH_40,
         NL80211_CHAN_WIDTH_80,
         NL80211_CHAN_WIDTH_80P80,
         NL80211_CHAN_WIDTH_160,
         NL80211_CHAN_WIDTH_5,
         NL80211_CHAN_WIDTH_10,
         NL80211_CHAN_WIDTH_1,
         NL80211_CHAN_WIDTH_2,
         NL80211_CHAN_WIDTH_4,
         NL80211_CHAN_WIDTH_8,
         NL80211_CHAN_WIDTH_16,
         NL80211_CHAN_WIDTH_320,
 };
 
 /**
  * enum nl80211_bss_scan_width - control channel width for a BSS
  *
  * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
  *
  * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
  * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
  * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
  * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide
  * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide
  */
 enum nl80211_bss_scan_width {
         NL80211_BSS_CHAN_WIDTH_20,
         NL80211_BSS_CHAN_WIDTH_10,
         NL80211_BSS_CHAN_WIDTH_5,
         NL80211_BSS_CHAN_WIDTH_1,
         NL80211_BSS_CHAN_WIDTH_2,
 };
 
 /**
  * enum nl80211_bss_use_for - bitmap indicating possible BSS use
  * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
  *      including IBSS/MBSS depending on the type.
  * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
  *      MLO connection. Note that for an MLO connection, all links including
  *      the assoc link must have this flag set, and the assoc link must
  *      additionally have %NL80211_BSS_USE_FOR_NORMAL set.
  */
 enum nl80211_bss_use_for {
         NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
         NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
 };
 
 /**
  * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
  *      BSS isn't possible
  * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
  *      supported by the device, and this BSS entry represents one.
  * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
  *      the AP power type (SP, VLP, AP) that the AP uses.
  */
 enum nl80211_bss_cannot_use_reasons {
         NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY  = 1 << 0,
         NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH        = 1 << 1,
 };
 
 #define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
         NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
 
 /**
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @__NL80211_BSS_INVALID: invalid
  * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
  * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
  * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
  *      (if @NL80211_BSS_PRESP_DATA is present then this is known to be
  *      from a probe response, otherwise it may be from the same beacon
  *      that the NL80211_BSS_BEACON_TSF will be from)
  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
  * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
  * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
  *      raw information elements from the probe response/beacon (bin);
  *      if the %NL80211_BSS_BEACON_IES attribute is present and the data is
  *      different then the IEs here are from a Probe Response frame; otherwise
  *      they are from a Beacon frame.
  *      However, if the driver does not indicate the source of the IEs, these
  *      IEs may be from either frame subtype.
  *      If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
  *      data here is known to be from a probe response, without any heuristics.
  * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
  *      in mBm (100 * dBm) (s32)
  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
  *      in unspecified units, scaled to 0..100 (u8)
  * @NL80211_BSS_STATUS: status, if this BSS is "used"
  * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
  * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
  *      elements from a Beacon frame (bin); not present if no Beacon frame has
  *      yet been received
  * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
  *      (u32, enum nl80211_bss_scan_width) - No longer used!
  * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
  *      (not present if no beacon frame has been received yet)
  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
  *      @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
  * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
  *      was last updated by a received frame. The value is expected to be
  *      accurate to about 10ms. (u64, nanoseconds)
  * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
  * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first
  *      octet of the timestamp field of the last beacon/probe received for
  *      this BSS. The time is the TSF of the BSS specified by
  *      @NL80211_BSS_PARENT_BSSID. (u64).
  * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
  *      is set.
  * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
  *      Contains a nested array of signal strength attributes (u8, dBm),
  *      using the nesting index as the antenna number.
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
  * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
  *      used for, see &enum nl80211_bss_use_for.
  * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
  *      be used for all or some of the possible uses by the device reporting it,
  *      even though its presence was detected.
  *      This is a u64 attribute containing a bitmap of values from
  *      &enum nl80211_cannot_use_reasons, note that the attribute may be missing
  *      if no reasons are specified.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
 enum nl80211_bss {
         __NL80211_BSS_INVALID,
         NL80211_BSS_BSSID,
         NL80211_BSS_FREQUENCY,
         NL80211_BSS_TSF,
         NL80211_BSS_BEACON_INTERVAL,
         NL80211_BSS_CAPABILITY,
         NL80211_BSS_INFORMATION_ELEMENTS,
         NL80211_BSS_SIGNAL_MBM,
         NL80211_BSS_SIGNAL_UNSPEC,
         NL80211_BSS_STATUS,
         NL80211_BSS_SEEN_MS_AGO,
         NL80211_BSS_BEACON_IES,
         NL80211_BSS_CHAN_WIDTH,
         NL80211_BSS_BEACON_TSF,
         NL80211_BSS_PRESP_DATA,
         NL80211_BSS_LAST_SEEN_BOOTTIME,
         NL80211_BSS_PAD,
         NL80211_BSS_PARENT_TSF,
         NL80211_BSS_PARENT_BSSID,
         NL80211_BSS_CHAIN_SIGNAL,
         NL80211_BSS_FREQUENCY_OFFSET,
         NL80211_BSS_MLO_LINK_ID,
         NL80211_BSS_MLD_ADDR,
         NL80211_BSS_USE_FOR,
         NL80211_BSS_CANNOT_USE_REASONS,
 
         /* keep last */
         __NL80211_BSS_AFTER_LAST,
         NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_bss_status - BSS "status"
  * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
  *      Note that this is no longer used since cfg80211 no longer
  *      keeps track of whether or not authentication was done with
  *      a given BSS.
  * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
  * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
  *
  * The BSS status is a BSS attribute in scan dumps, which
  * indicates the status the interface has wrt. this BSS.
  */
 enum nl80211_bss_status {
         NL80211_BSS_STATUS_AUTHENTICATED,
         NL80211_BSS_STATUS_ASSOCIATED,
         NL80211_BSS_STATUS_IBSS_JOINED,
 };
 
 /**
  * enum nl80211_auth_type - AuthenticationType
  *
  * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
  * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
  * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
  * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
  * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
  * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
  * @__NL80211_AUTHTYPE_NUM: internal
  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
  *      trying multiple times); this is invalid in netlink -- leave out
  *      the attribute for this on CONNECT commands.
  */
 enum nl80211_auth_type {
         NL80211_AUTHTYPE_OPEN_SYSTEM,
         NL80211_AUTHTYPE_SHARED_KEY,
         NL80211_AUTHTYPE_FT,
         NL80211_AUTHTYPE_NETWORK_EAP,
         NL80211_AUTHTYPE_SAE,
         NL80211_AUTHTYPE_FILS_SK,
         NL80211_AUTHTYPE_FILS_SK_PFS,
         NL80211_AUTHTYPE_FILS_PK,
 
         /* keep last */
         __NL80211_AUTHTYPE_NUM,
         NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
         NL80211_AUTHTYPE_AUTOMATIC
 };
 
 /**
  * enum nl80211_key_type - Key Type
  * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
  * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
  * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
  * @NUM_NL80211_KEYTYPES: number of defined key types
  */
 enum nl80211_key_type {
         NL80211_KEYTYPE_GROUP,
         NL80211_KEYTYPE_PAIRWISE,
         NL80211_KEYTYPE_PEERKEY,
 
         NUM_NL80211_KEYTYPES
 };
 
 /**
  * enum nl80211_mfp - Management frame protection state
  * @NL80211_MFP_NO: Management frame protection not used
  * @NL80211_MFP_REQUIRED: Management frame protection required
  * @NL80211_MFP_OPTIONAL: Management frame protection is optional
  */
 enum nl80211_mfp {
         NL80211_MFP_NO,
         NL80211_MFP_REQUIRED,
         NL80211_MFP_OPTIONAL,
 };
 
 enum nl80211_wpa_versions {
         NL80211_WPA_VERSION_1 = 1 << 0,
         NL80211_WPA_VERSION_2 = 1 << 1,
         NL80211_WPA_VERSION_3 = 1 << 2,
 };
 
 /**
  * enum nl80211_key_default_types - key default types
  * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
  * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
  *      unicast key
  * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
  *      multicast key
  * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
  */
 enum nl80211_key_default_types {
         __NL80211_KEY_DEFAULT_TYPE_INVALID,
         NL80211_KEY_DEFAULT_TYPE_UNICAST,
         NL80211_KEY_DEFAULT_TYPE_MULTICAST,
 
         NUM_NL80211_KEY_DEFAULT_TYPES
 };
 
 /**
  * enum nl80211_key_attributes - key attributes
  * @__NL80211_KEY_INVALID: invalid
  * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
  *      16 bytes encryption key followed by 8 bytes each for TX and RX MIC
  *      keys
  * @NL80211_KEY_IDX: key ID (u8, 0-3)
  * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
  *      section 7.3.2.25.1, e.g. 0x000FAC04)
  * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
  *      CCMP keys, each six bytes in little endian
  * @NL80211_KEY_DEFAULT: flag indicating default key
  * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
  * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
  *      specified the default depends on whether a MAC address was
  *      given with the command using the key or not (u32)
  * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
  *      attributes, specifying what a key should be set as default as.
  *      See &enum nl80211_key_default_types.
  * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
  *      Defaults to @NL80211_KEY_RX_TX.
  * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
  *
  * @__NL80211_KEY_AFTER_LAST: internal
  * @NL80211_KEY_MAX: highest key attribute
  */
 enum nl80211_key_attributes {
         __NL80211_KEY_INVALID,
         NL80211_KEY_DATA,
         NL80211_KEY_IDX,
         NL80211_KEY_CIPHER,
         NL80211_KEY_SEQ,
         NL80211_KEY_DEFAULT,
         NL80211_KEY_DEFAULT_MGMT,
         NL80211_KEY_TYPE,
         NL80211_KEY_DEFAULT_TYPES,
         NL80211_KEY_MODE,
         NL80211_KEY_DEFAULT_BEACON,
 
         /* keep last */
         __NL80211_KEY_AFTER_LAST,
         NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_tx_rate_attributes - TX rate set attributes
  * @__NL80211_TXRATE_INVALID: invalid
  * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
  *      in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
  *      1 = 500 kbps) but without the IE length restriction (at most
  *      %NL80211_MAX_SUPP_RATES in a single array).
  * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection
  *      in an array of MCS numbers.
  * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
  *      see &struct nl80211_txrate_vht
  * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
  * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,
  *      see &struct nl80211_txrate_he
  * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
  * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
  * @__NL80211_TXRATE_AFTER_LAST: internal
  * @NL80211_TXRATE_MAX: highest TX rate attribute
  */
 enum nl80211_tx_rate_attributes {
         __NL80211_TXRATE_INVALID,
         NL80211_TXRATE_LEGACY,
         NL80211_TXRATE_HT,
         NL80211_TXRATE_VHT,
         NL80211_TXRATE_GI,
         NL80211_TXRATE_HE,
         NL80211_TXRATE_HE_GI,
         NL80211_TXRATE_HE_LTF,
 
         /* keep last */
         __NL80211_TXRATE_AFTER_LAST,
         NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
 };
 
 #define NL80211_TXRATE_MCS NL80211_TXRATE_HT
 #define NL80211_VHT_NSS_MAX             8
 
 /**
  * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap
  * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
  */
 struct nl80211_txrate_vht {
         __u16 mcs[NL80211_VHT_NSS_MAX];
 };
 
 #define NL80211_HE_NSS_MAX              8
 /**
  * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
  * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
  */
 struct nl80211_txrate_he {
         __u16 mcs[NL80211_HE_NSS_MAX];
 };
 
 enum nl80211_txrate_gi {
         NL80211_TXRATE_DEFAULT_GI,
         NL80211_TXRATE_FORCE_SGI,
         NL80211_TXRATE_FORCE_LGI,
 };
 
 /**
  * enum nl80211_band - Frequency band
  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
  * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
  * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
  * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
  * @NL80211_BAND_LC: light communication band (placeholder)
  * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
  *      since newer kernel versions may support more bands
  */
 enum nl80211_band {
         NL80211_BAND_2GHZ,
         NL80211_BAND_5GHZ,
         NL80211_BAND_60GHZ,
         NL80211_BAND_6GHZ,
         NL80211_BAND_S1GHZ,
         NL80211_BAND_LC,
 
         NUM_NL80211_BANDS,
 };
 
 /**
  * enum nl80211_ps_state - powersave state
  * @NL80211_PS_DISABLED: powersave is disabled
  * @NL80211_PS_ENABLED: powersave is enabled
  */
 enum nl80211_ps_state {
         NL80211_PS_DISABLED,
         NL80211_PS_ENABLED,
 };
 
 /**
  * enum nl80211_attr_cqm - connection quality monitor attributes
  * @__NL80211_ATTR_CQM_INVALID: invalid
  * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
  *      the threshold for the RSSI level at which an event will be sent. Zero
  *      to disable.  Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
  *      set, multiple values can be supplied as a low-to-high sorted array of
  *      threshold values in dBm.  Events will be sent when the RSSI value
  *      crosses any of the thresholds.
  * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
  *      the minimum amount the RSSI level must change after an event before a
  *      new event may be issued (to reduce effects of RSSI oscillation).
  * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
  * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
  *      consecutive packets were not acknowledged by the peer
  * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures
  *      during the given %NL80211_ATTR_CQM_TXE_INTVL before an
  *      %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and
  *      %NL80211_ATTR_CQM_TXE_PKTS is generated.
  * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given
  *      %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is
  *      checked.
  * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic
  *      interval in which %NL80211_ATTR_CQM_TXE_PKTS and
  *      %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
  *      %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
  * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
  *      loss event
  * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
  *      RSSI threshold event.
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
 enum nl80211_attr_cqm {
         __NL80211_ATTR_CQM_INVALID,
         NL80211_ATTR_CQM_RSSI_THOLD,
         NL80211_ATTR_CQM_RSSI_HYST,
         NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
         NL80211_ATTR_CQM_PKT_LOSS_EVENT,
         NL80211_ATTR_CQM_TXE_RATE,
         NL80211_ATTR_CQM_TXE_PKTS,
         NL80211_ATTR_CQM_TXE_INTVL,
         NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
         NL80211_ATTR_CQM_RSSI_LEVEL,
 
         /* keep last */
         __NL80211_ATTR_CQM_AFTER_LAST,
         NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
  * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
  *      configured threshold
  * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
  *      configured threshold
  * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
  */
 enum nl80211_cqm_rssi_threshold_event {
         NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
         NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
         NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
 };
 
 
 /**
  * enum nl80211_tx_power_setting - TX power adjustment
  * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
  * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
  * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
  */
 enum nl80211_tx_power_setting {
         NL80211_TX_POWER_AUTOMATIC,
         NL80211_TX_POWER_LIMITED,
         NL80211_TX_POWER_FIXED,
 };
 
 /**
  * enum nl80211_tid_config - TID config state
  * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
  * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
  */
 enum nl80211_tid_config {
         NL80211_TID_CONFIG_ENABLE,
         NL80211_TID_CONFIG_DISABLE,
 };
 
 /* enum nl80211_tx_rate_setting - TX rate configuration type
  * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
  * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
  * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
  */
 enum nl80211_tx_rate_setting {
         NL80211_TX_RATE_AUTOMATIC,
         NL80211_TX_RATE_LIMITED,
         NL80211_TX_RATE_FIXED,
 };
 
 /* enum nl80211_tid_config_attr - TID specific configuration.
  * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
  * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
  *      for per-vif configuration; doesn't list the ones that are generic
  *      (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *      per peer instead.
  * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
  *      that the new configuration overrides all previous peer
  *      configurations, otherwise previous peer specific configurations
  *      should be left untouched.
  * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
  *      Its type is u16.
  * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
  *      specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
  *      Its type is u8.
  * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
  *      transmission, user-space sets this configuration in
  *      &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
  *      the max value is advertised by the driver in this attribute on
  *      output in wiphy capabilities.
  * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
  *      transmission, user-space sets this configuration in
  *      &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
  *      the max value is advertised by the driver in this attribute on
  *      output in wiphy capabilities.
  * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
  *      for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
  *      Its type is u8, using the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
  *      specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
  *      the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
  *      for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
  *      Its type is u8, using the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
  *      to notfiy the driver that what type of txrate should be used
  *      for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
  *      the values form &nl80211_tx_rate_setting.
  * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
  *      with the parameters passed through %NL80211_ATTR_TX_RATES.
  *      configuration is applied to the data frame for the tid to that connected
  *      station.
  */
 enum nl80211_tid_config_attr {
         __NL80211_TID_CONFIG_ATTR_INVALID,
         NL80211_TID_CONFIG_ATTR_PAD,
         NL80211_TID_CONFIG_ATTR_VIF_SUPP,
         NL80211_TID_CONFIG_ATTR_PEER_SUPP,
         NL80211_TID_CONFIG_ATTR_OVERRIDE,
         NL80211_TID_CONFIG_ATTR_TIDS,
         NL80211_TID_CONFIG_ATTR_NOACK,
         NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
         NL80211_TID_CONFIG_ATTR_RETRY_LONG,
         NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
         NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
         NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
         NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
         NL80211_TID_CONFIG_ATTR_TX_RATE,
 
         /* keep last */
         __NL80211_TID_CONFIG_ATTR_AFTER_LAST,
         NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_packet_pattern_attr - packet pattern attribute
  * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
  * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
  *      a zero bit are ignored
  * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
  *      a bit for each byte in the pattern. The lowest-order bit corresponds
  *      to the first byte of the pattern, but the bytes of the pattern are
  *      in a little-endian-like format, i.e. the 9th byte of the pattern
  *      corresponds to the lowest-order bit in the second byte of the mask.
  *      For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
  *      xx indicates "don't care") would be represented by a pattern of
  *      twelve zero bytes, and a mask of "0xed,0x01".
  *      Note that the pattern matching is done as though frames were not
  *      802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
  *      first (including SNAP header unpacking) and then matched.
  * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
  *      these fixed number of bytes of received packet
  * @NUM_NL80211_PKTPAT: number of attributes
  * @MAX_NL80211_PKTPAT: max attribute number
  */
 enum nl80211_packet_pattern_attr {
         __NL80211_PKTPAT_INVALID,
         NL80211_PKTPAT_MASK,
         NL80211_PKTPAT_PATTERN,
         NL80211_PKTPAT_OFFSET,
 
         NUM_NL80211_PKTPAT,
         MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
 };
 
 /**
  * struct nl80211_pattern_support - packet pattern support information
  * @max_patterns: maximum number of patterns supported
  * @min_pattern_len: minimum length of each pattern
  * @max_pattern_len: maximum length of each pattern
  * @max_pkt_offset: maximum Rx packet offset
  *
  * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
  * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
  * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
  * %NL80211_ATTR_COALESCE_RULE in the capability information given
  * by the kernel to userspace.
  */
 struct nl80211_pattern_support {
         __u32 max_patterns;
         __u32 min_pattern_len;
         __u32 max_pattern_len;
         __u32 max_pkt_offset;
 } __attribute__((packed));
 
 /* only for backward compatibility */
 #define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
 #define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
 #define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
 #define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
 #define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
 #define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
 #define nl80211_wowlan_pattern_support nl80211_pattern_support
 
 /**
  * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
  * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
  * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
  *      the chip into a special state -- works best with chips that have
  *      support for low-power operation already (flag)
  *      Note that this mode is incompatible with all of the others, if
  *      any others are even supported by the device.
  * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
  *      is detected is implementation-specific (flag)
  * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
  *      by 16 repetitions of MAC addr, anywhere in payload) (flag)
  * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
  *      which are passed in an array of nested attributes, each nested attribute
  *      defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
  *      Each pattern defines a wakeup packet. Packet offset is associated with
  *      each pattern which is used while matching the pattern. The matching is
  *      done on the MSDU, i.e. as though the packet was an 802.3 packet, so the
  *      pattern matching is done after the packet is converted to the MSDU.
  *
  *      In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
  *      carrying a &struct nl80211_pattern_support.
  *
  *      When reporting wakeup. it is a u32 attribute containing the 0-based
  *      index of the pattern that caused the wakeup, in the patterns passed
  *      to the kernel when configuring.
  * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
  *      used when setting, used only to indicate that GTK rekeying is supported
  *      by the device (flag)
  * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
  *      done by the device) (flag)
  * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
  *      packet (flag)
  * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
  * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
  *      (on devices that have rfkill in the device) (flag)
  * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains
  *      the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame
  *      may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN
  *      attribute contains the original length.
  * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11
  *      packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211
  *      attribute if the packet was truncated somewhere.
  * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the
  *      802.11 packet that caused the wakeup, e.g. a magic packet. The frame may
  *      be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
  *      contains the original length.
  * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3
  *      packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023
  *      attribute if the packet was truncated somewhere.
  * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section
  *      "TCP connection wakeup" for more details. This is a nested attribute
  *      containing the exact information for establishing and keeping alive
  *      the TCP connection.
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the
  *      wakeup packet was received on the TCP connection
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the
  *      TCP connection was lost or failed to be established
  * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
  *      the TCP connection ran out of tokens to use for data to send to the
  *      service
  * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
  *      is detected.  This is a nested attribute that contains the
  *      same attributes used with @NL80211_CMD_START_SCHED_SCAN.  It
  *      specifies how the scan is performed (e.g. the interval, the
  *      channels to scan and the initial delay) as well as the scan
  *      results that will trigger a wake (i.e. the matchsets).  This
  *      attribute is also sent in a response to
  *      @NL80211_CMD_GET_WIPHY, indicating the number of match sets
  *      supported by the driver (u32).
  * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
  *      containing an array with information about what triggered the
  *      wake up.  If no elements are present in the array, it means
  *      that the information is not available.  If more than one
  *      element is present, it means that more than one match
  *      occurred.
  *      Each element in the array is a nested attribute that contains
  *      one optional %NL80211_ATTR_SSID attribute and one optional
  *      %NL80211_ATTR_SCAN_FREQUENCIES attribute.  At least one of
  *      these attributes must be present.  If
  *      %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
  *      frequency, it means that the match occurred in more than one
  *      channel.
  * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
  *      Wake up happened due to unprotected deauth or disassoc frame in MFP.
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  *
  * These nested attributes are used to configure the wakeup triggers and
  * to report the wakeup reason(s).
  */
 enum nl80211_wowlan_triggers {
         __NL80211_WOWLAN_TRIG_INVALID,
         NL80211_WOWLAN_TRIG_ANY,
         NL80211_WOWLAN_TRIG_DISCONNECT,
         NL80211_WOWLAN_TRIG_MAGIC_PKT,
         NL80211_WOWLAN_TRIG_PKT_PATTERN,
         NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
         NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
         NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
         NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
         NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
         NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,
         NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,
         NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,
         NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,
         NL80211_WOWLAN_TRIG_TCP_CONNECTION,
         NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
         NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
         NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
         NL80211_WOWLAN_TRIG_NET_DETECT,
         NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
         NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
 
         /* keep last */
         NUM_NL80211_WOWLAN_TRIG,
         MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
 };
 
 /**
  * DOC: TCP connection wakeup
  *
  * Some devices can establish a TCP connection in order to be woken up by a
  * packet coming in from outside their network segment, or behind NAT. If
  * configured, the device will establish a TCP connection to the given
  * service, and periodically send data to that service. The first data
  * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.
  * The data packets can optionally include a (little endian) sequence
  * number (in the TCP payload!) that is generated by the device, and, also
  * optionally, a token from a list of tokens. This serves as a keep-alive
  * with the service, and for NATed connections, etc.
  *
  * During this keep-alive period, the server doesn't send any data to the
  * client. When receiving data, it is compared against the wakeup pattern
  * (and mask) and if it matches, the host is woken up. Similarly, if the
  * connection breaks or cannot be established to start with, the host is
  * also woken up.
  *
  * Developer's note: ARP offload is required for this, otherwise TCP
  * response packets might not go through correctly.
  */
 
 /**
  * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence
  * @start: starting value
  * @offset: offset of sequence number in packet
  * @len: length of the sequence value to write, 1 through 4
  *
  * Note: don't confuse with the TCP sequence number(s), this is for the
  * keepalive packet payload. The actual value is written into the packet
  * in little endian.
  */
 struct nl80211_wowlan_tcp_data_seq {
         __u32 start, offset, len;
 };
 
 /**
  * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config
  * @offset: offset of token in packet
  * @len: length of each token
  * @token_stream: stream of data to be used for the tokens, the length must
  *      be a multiple of @len for this to make sense
  */
 struct nl80211_wowlan_tcp_data_token {
         __u32 offset, len;
         __u8 token_stream[];
 };
 
 /**
  * struct nl80211_wowlan_tcp_data_token_feature - data token features
  * @min_len: minimum token length
  * @max_len: maximum token length
  * @bufsize: total available token buffer size (max size of @token_stream)
  */
 struct nl80211_wowlan_tcp_data_token_feature {
         __u32 min_len, max_len, bufsize;
 };
 
 /**
  * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters
  * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes
  * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)
  * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address
  *      (in network byte order)
  * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because
  *      route lookup when configured might be invalid by the time we suspend,
  *      and doing a route lookup when suspending is no longer possible as it
  *      might require ARP querying.
  * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a
  *      socket and port will be allocated
  * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)
  * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.
  *      For feature advertising, a u32 attribute holding the maximum length
  *      of the data payload.
  * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration
  *      (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature
  *      advertising it is just a flag
  * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,
  *      see &struct nl80211_wowlan_tcp_data_token and for advertising see
  *      &struct nl80211_wowlan_tcp_data_token_feature.
  * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum
  *      interval in feature advertising (u32)
  * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
  *      u32 attribute holding the maximum length
  * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
  *      feature advertising. The mask works like @NL80211_PKTPAT_MASK
  *      but on the TCP payload only.
  * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
  * @MAX_NL80211_WOWLAN_TCP: highest attribute number
  */
 enum nl80211_wowlan_tcp_attrs {
         __NL80211_WOWLAN_TCP_INVALID,
         NL80211_WOWLAN_TCP_SRC_IPV4,
         NL80211_WOWLAN_TCP_DST_IPV4,
         NL80211_WOWLAN_TCP_DST_MAC,
         NL80211_WOWLAN_TCP_SRC_PORT,
         NL80211_WOWLAN_TCP_DST_PORT,
         NL80211_WOWLAN_TCP_DATA_PAYLOAD,
         NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,
         NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,
         NL80211_WOWLAN_TCP_DATA_INTERVAL,
         NL80211_WOWLAN_TCP_WAKE_PAYLOAD,
         NL80211_WOWLAN_TCP_WAKE_MASK,
 
         /* keep last */
         NUM_NL80211_WOWLAN_TCP,
         MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1
 };
 
 /**
  * struct nl80211_coalesce_rule_support - coalesce rule support information
  * @max_rules: maximum number of rules supported
  * @pat: packet pattern support information
  * @max_delay: maximum supported coalescing delay in msecs
  *
  * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
  * capability information given by the kernel to userspace.
  */
 struct nl80211_coalesce_rule_support {
         __u32 max_rules;
         struct nl80211_pattern_support pat;
         __u32 max_delay;
 } __attribute__((packed));
 
 /**
  * enum nl80211_attr_coalesce_rule - coalesce rule attribute
  * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
  * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
  * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
  *      see &enum nl80211_coalesce_condition.
  * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
  *      after these fixed number of bytes of received packet
  * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
  * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
  */
 enum nl80211_attr_coalesce_rule {
         __NL80211_COALESCE_RULE_INVALID,
         NL80211_ATTR_COALESCE_RULE_DELAY,
         NL80211_ATTR_COALESCE_RULE_CONDITION,
         NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
 
         /* keep last */
         NUM_NL80211_ATTR_COALESCE_RULE,
         NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
 };
 
 /**
  * enum nl80211_coalesce_condition - coalesce rule conditions
  * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
  *      in a rule are matched.
  * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
  *      in a rule are not matched.
  */
 enum nl80211_coalesce_condition {
         NL80211_COALESCE_CONDITION_MATCH,
         NL80211_COALESCE_CONDITION_NO_MATCH
 };
 
 /**
  * enum nl80211_iface_limit_attrs - limit attributes
  * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
  * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
  *      can be chosen from this set of interface types (u32)
  * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
  *      flag attribute for each interface type in this set
  * @NUM_NL80211_IFACE_LIMIT: number of attributes
  * @MAX_NL80211_IFACE_LIMIT: highest attribute number
  */
 enum nl80211_iface_limit_attrs {
         NL80211_IFACE_LIMIT_UNSPEC,
         NL80211_IFACE_LIMIT_MAX,
         NL80211_IFACE_LIMIT_TYPES,
 
         /* keep last */
         NUM_NL80211_IFACE_LIMIT,
         MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
 };
 
 /**
  * enum nl80211_if_combination_attrs -- interface combination attributes
  *
  * @NL80211_IFACE_COMB_UNSPEC: (reserved)
  * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
  *      for given interface types, see &enum nl80211_iface_limit_attrs.
  * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
  *      interfaces that can be created in this group. This number doesn't
  *      apply to interfaces purely managed in software, which are listed
  *      in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
  * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
  *      beacon intervals within this group must be all the same even for
  *      infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
  *      the infrastructure network's beacon interval.
  * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
  *      different channels may be used within this group.
  * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
  *      of supported channel widths for radar detection.
  * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
  *      of supported regulatory regions for radar detection.
  * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
  *      different beacon intervals supported by all the interface combinations
  *      in this group (if not present, all beacon intervals be identical).
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
  * Examples:
  *      limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
  *      => allows an AP and a STA that must match BIs
  *
  *      numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
  *      => allows 8 of AP/GO that can have BI gcd >= min gcd
  *
  *      numbers = [ #{STA} <= 2 ], channels = 2, max = 2
  *      => allows two STAs on the same or on different channels
  *
  *      numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
  *      => allows a STA plus three P2P interfaces
  *
  * The list of these four possibilities could completely be contained
  * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
  * that any of these groups must match.
  *
  * "Combinations" of just a single interface will not be listed here,
  * a single interface of any valid interface type is assumed to always
  * be possible by itself. This means that implicitly, for each valid
  * interface type, the following group always exists:
  *      numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
  */
 enum nl80211_if_combination_attrs {
         NL80211_IFACE_COMB_UNSPEC,
         NL80211_IFACE_COMB_LIMITS,
         NL80211_IFACE_COMB_MAXNUM,
         NL80211_IFACE_COMB_STA_AP_BI_MATCH,
         NL80211_IFACE_COMB_NUM_CHANNELS,
         NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
         NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
         NL80211_IFACE_COMB_BI_MIN_GCD,
 
         /* keep last */
         NUM_NL80211_IFACE_COMB,
         MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
 };
 
 
 /**
  * enum nl80211_plink_state - state of a mesh peer link finite state machine
  *
  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
  *      state of non-existent mesh peer links
  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
  *      this mesh peer
  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
  *      from this mesh peer
  * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
  *      received from this mesh peer
  * @NL80211_PLINK_ESTAB: mesh peer link is established
  * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
  * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
  *      plink are discarded, except for authentication frames
  * @NUM_NL80211_PLINK_STATES: number of peer link states
  * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
  */
 enum nl80211_plink_state {
         NL80211_PLINK_LISTEN,
         NL80211_PLINK_OPN_SNT,
         NL80211_PLINK_OPN_RCVD,
         NL80211_PLINK_CNF_RCVD,
         NL80211_PLINK_ESTAB,
         NL80211_PLINK_HOLDING,
         NL80211_PLINK_BLOCKED,
 
         /* keep last */
         NUM_NL80211_PLINK_STATES,
         MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
 };
 
 /**
  * enum nl80211_plink_action - actions to perform in mesh peers
  *
  * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
  * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
  * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
  * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
  */
 enum nl80211_plink_action {
         NL80211_PLINK_ACTION_NO_ACTION,
         NL80211_PLINK_ACTION_OPEN,
         NL80211_PLINK_ACTION_BLOCK,
 
         NUM_NL80211_PLINK_ACTIONS,
 };
 
 
 #define NL80211_KCK_LEN                 16
 #define NL80211_KEK_LEN                 16
 #define NL80211_KCK_EXT_LEN             24
 #define NL80211_KEK_EXT_LEN             32
 #define NL80211_KCK_EXT_LEN_32          32
 #define NL80211_REPLAY_CTR_LEN          8
 
 /**
  * enum nl80211_rekey_data - attributes for GTK rekey offload
  * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
  * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
  * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
  * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
  * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
  * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
  * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
  */
 enum nl80211_rekey_data {
         __NL80211_REKEY_DATA_INVALID,
         NL80211_REKEY_DATA_KEK,
         NL80211_REKEY_DATA_KCK,
         NL80211_REKEY_DATA_REPLAY_CTR,
         NL80211_REKEY_DATA_AKM,
 
         /* keep last */
         NUM_NL80211_REKEY_DATA,
         MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
 };
 
 /**
  * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
  * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
  *      Beacon frames)
  * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
  *      in Beacon frames
  * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
  *      element in Beacon frames but zero out each byte in the SSID
  */
 enum nl80211_hidden_ssid {
         NL80211_HIDDEN_SSID_NOT_IN_USE,
         NL80211_HIDDEN_SSID_ZERO_LEN,
         NL80211_HIDDEN_SSID_ZERO_CONTENTS
 };
 
 /**
  * enum nl80211_sta_wme_attr - station WME attributes
  * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
  * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
  *      is the same as the AC bitmap in the QoS info field.
  * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
  *      as the MAX_SP field in the QoS info field (but already shifted down).
  * @__NL80211_STA_WME_AFTER_LAST: internal
  * @NL80211_STA_WME_MAX: highest station WME attribute
  */
 enum nl80211_sta_wme_attr {
         __NL80211_STA_WME_INVALID,
         NL80211_STA_WME_UAPSD_QUEUES,
         NL80211_STA_WME_MAX_SP,
 
         /* keep last */
         __NL80211_STA_WME_AFTER_LAST,
         NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
  * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
  * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
  *      priority)
  * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
  * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
  * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
  *      (internal)
  * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
  *      (internal)
  */
 enum nl80211_pmksa_candidate_attr {
         __NL80211_PMKSA_CANDIDATE_INVALID,
         NL80211_PMKSA_CANDIDATE_INDEX,
         NL80211_PMKSA_CANDIDATE_BSSID,
         NL80211_PMKSA_CANDIDATE_PREAUTH,
 
         /* keep last */
         NUM_NL80211_PMKSA_CANDIDATE,
         MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
 };
 
 /**
  * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
  * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
  * @NL80211_TDLS_SETUP: Setup TDLS link
  * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
  * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
  * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
  */
 enum nl80211_tdls_operation {
         NL80211_TDLS_DISCOVERY_REQ,
         NL80211_TDLS_SETUP,
         NL80211_TDLS_TEARDOWN,
         NL80211_TDLS_ENABLE_LINK,
         NL80211_TDLS_DISABLE_LINK,
 };
 
 /**
  * enum nl80211_ap_sme_features - device-integrated AP features
  * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver
  *      when user space indicates support for SA Query procedures offload during
  *      "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT.
  */
 enum nl80211_ap_sme_features {
         NL80211_AP_SME_SA_QUERY_OFFLOAD         = 1 << 0,
 };
 
 /**
  * enum nl80211_feature_flags - device/driver features
  * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
  *      TX status to the socket error queue when requested with the
  *      socket option.
  * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
  * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
  *      the connected inactive stations in AP mode.
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *      to work properly to support receiving regulatory hints from
  *      cellular base stations.
  * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
  *      here to reserve the value for API/ABI compatibility)
  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
  *      equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
  *      mode
  * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan
  * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported
  * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif
  * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting
  * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform
  *      OBSS scans and generate 20/40 BSS coex reports. This flag is used only
  *      for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.
  * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window
  *      setting
  * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic
  *      powersave
  * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state
  *      transitions for AP clients. Without this flag (and if the driver
  *      doesn't have the AP SME in the device) the driver supports adding
  *      stations only when they're associated and adds them in associated
  *      state (to later be transitioned into authorized), with this flag
  *      they should be added before even sending the authentication reply
  *      and then transitioned into authenticated, associated and authorized
  *      states using station flags.
  *      Note that even for drivers that support this, the default is to add
  *      stations in authenticated/associated state, so to add unauthenticated
  *      stations the authenticated/associated bits have to be set in the mask.
  * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
  *      (HT40, VHT 80/160 MHz) if this flag is set
  * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
  *      Peering Management entity which may be implemented by registering for
  *      beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
  *      still generated by the driver.
  * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
  *      interface. An active monitor interface behaves like a normal monitor
  *      interface, but gets added to the driver. It ensures that incoming
  *      unicast packets directed at the configured interface address get ACKed.
  * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
  *      channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
  *      lifetime of a BSS.
  * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter
  *      Set IE to probe requests.
  * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE
  *      to probe requests.
  * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period
  *      requests sent to it by an AP.
  * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the
  *      current tx power value into the TPC Report IE in the spectrum
  *      management TPC Report action frame, and in the Radio Measurement Link
  *      Measurement Report action frame.
  * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout
  *      estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
  *      to enable dynack.
  * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial
  *      multiplexing powersave, ie. can turn off all but one chain
  *      even on HT connections that should be using more chains.
  * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial
  *      multiplexing powersave, ie. can turn off all but one chain
  *      and then wake the rest up as required after, for example,
  *      rts/cts handshake.
  * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
  *      TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
  *      command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
  *      needs to be able to handle Block-Ack agreements and other things.
  * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
  *      the vif's MAC address upon creation.
  *      See 'macaddr' field in the vif_params (cfg80211.h).
  * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
  *      operating as a TDLS peer.
  * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
  *      random MAC address during scan (if the device is unassociated); the
  *      %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
  *      address mask/value will be used.
  * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
  *      using a random MAC address for every scan iteration during scheduled
  *      scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
  *      be set for scheduled scan and the MAC address mask/value will be used.
  * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
  *      random MAC address for every scan iteration during "net detect", i.e.
  *      scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
  *      be set for scheduled scan and the MAC address mask/value will be used.
  */
 enum nl80211_feature_flags {
         NL80211_FEATURE_SK_TX_STATUS                    = 1 << 0,
         NL80211_FEATURE_HT_IBSS                         = 1 << 1,
         NL80211_FEATURE_INACTIVITY_TIMER                = 1 << 2,
         NL80211_FEATURE_CELL_BASE_REG_HINTS             = 1 << 3,
         NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL        = 1 << 4,
         NL80211_FEATURE_SAE                             = 1 << 5,
         NL80211_FEATURE_LOW_PRIORITY_SCAN               = 1 << 6,
         NL80211_FEATURE_SCAN_FLUSH                      = 1 << 7,
         NL80211_FEATURE_AP_SCAN                         = 1 << 8,
         NL80211_FEATURE_VIF_TXPOWER                     = 1 << 9,
         NL80211_FEATURE_NEED_OBSS_SCAN                  = 1 << 10,
         NL80211_FEATURE_P2P_GO_CTWIN                    = 1 << 11,
         NL80211_FEATURE_P2P_GO_OPPPS                    = 1 << 12,
         /* bit 13 is reserved */
         NL80211_FEATURE_ADVERTISE_CHAN_LIMITS           = 1 << 14,
         NL80211_FEATURE_FULL_AP_CLIENT_STATE            = 1 << 15,
         NL80211_FEATURE_USERSPACE_MPM                   = 1 << 16,
         NL80211_FEATURE_ACTIVE_MONITOR                  = 1 << 17,
         NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE       = 1 << 18,
         NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES       = 1 << 19,
         NL80211_FEATURE_WFA_TPC_IE_IN_PROBES            = 1 << 20,
         NL80211_FEATURE_QUIET                           = 1 << 21,
         NL80211_FEATURE_TX_POWER_INSERTION              = 1 << 22,
         NL80211_FEATURE_ACKTO_ESTIMATION                = 1 << 23,
         NL80211_FEATURE_STATIC_SMPS                     = 1 << 24,
         NL80211_FEATURE_DYNAMIC_SMPS                    = 1 << 25,
         NL80211_FEATURE_SUPPORTS_WMM_ADMISSION          = 1 << 26,
         NL80211_FEATURE_MAC_ON_CREATE                   = 1 << 27,
         NL80211_FEATURE_TDLS_CHANNEL_SWITCH             = 1 << 28,
         NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR            = 1 << 29,
         NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR      = 1 << 30,
         NL80211_FEATURE_ND_RANDOM_MAC_ADDR              = 1U << 31,
 };
 
 /**
  * enum nl80211_ext_feature_index - bit index of extended features.
  * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
  * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can
  *      request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *      %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *      the ASSOC_REQ_USE_RRM flag in the association request even if
  *      NL80211_FEATURE_QUIET is not advertised.
  * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
  *      sniffer which means that it can be configured to hear packets from
  *      certain groups which can be configured by the
  *      %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
  *      or can be configured to follow a station by configuring the
  *      %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
  * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual
  *      time the scan started in scan results event. The time is the TSF of
  *      the BSS that the interface that requested the scan is connected to
  *      (if available).
  * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
  *      time the last beacon/probe was received. For a non-MLO connection, the
  *      time is the TSF of the BSS that the interface that requested the scan is
  *      connected to (if available). For an MLO connection, the time is the TSF
  *      of the BSS corresponding with link ID specified in the scan request (if
  *      specified).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *      channel dwell time.
  * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
  *      configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
  * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
  *      configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
  *      configuration (AP/mesh) with VHT rates.
  * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
  *      with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
  * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
  *      in @NL80211_CMD_FRAME while not associated.
  * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
  *      randomized TA in @NL80211_CMD_FRAME while associated.
  * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
  *      for reporting BSSs with better RSSI than the current connected BSS
  *      (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
  * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
  *      %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
  *      RSSI threshold values to monitor rather than exactly one threshold.
  * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
  *      authentication with %NL80211_CMD_CONNECT.
  * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
  *      handshake with PSK in station mode (PSK is passed as part of the connect
  *      and associate commands), doing it in the host might not be supported.
  * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
  *      handshake with 802.1X in station mode (will pass EAP frames to the host
  *      and accept the set_pmk/del_pmk commands), doing it in the host might not
  *      be supported.
  * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
  *      the max channel attribute in the FILS request params IE with the
  *      actual dwell time.
  * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
  *      response
  * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
  *      the first probe request in each channel at rate of at least 5.5Mbps.
  * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
  *      probe request tx deferral and suppression
  * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
  *      value in %NL80211_ATTR_USE_MFP.
  * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
  * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
  * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
  * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.
  *      Device or driver will do all DFS-related actions by itself,
  *      informing user-space about CAC progress, radar detection event,
  *      channel change triggered by radar detection event.
  *      No need to start CAC from user-space, no need to react to
  *      "radar detected" event.
  * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
  *      receiving control port frames over nl80211 instead of the netdevice.
  * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
  *      (average) ACK signal strength reporting.
  * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID
  * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
  *      TXQs.
  * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
  *      SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
  * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
  *      except for supported rates from the probe request content if requested
  *      by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
  * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
  *      timing measurement responder role.
  *
  * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
  *      able to rekey an in-use key correctly. Userspace must not rekey PTK keys
  *      if this flag is not set. Ignoring this can leak clear text packets and/or
  *      freeze the connection.
  * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
  *      Individually Addressed Frames" from IEEE802.11-2016.
  *
  * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
  *      fairness for transmitted packets and has enabled airtime fairness
  *      scheduling.
  *
  * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
  *      (set/del PMKSA operations) in AP mode.
  *
  * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
  *
  * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
  *      to a station.
  *
  * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
  *      station mode (SAE password is passed as part of the connect command).
  *
  * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
  *      with VLAN tagged frames and separate VLAN-specific netdevs added using
  *      vconfig similarly to the Ethernet case.
  *
  * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
  *      feature, which prevents bufferbloat by using the expected transmission
  *      time to limit the amount of data buffered in the hardware.
  *
  * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
  *      and can receive key configuration for BIGTK using key indexes 6 and 7.
  * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
  *      protection as a client only and cannot transmit protected beacons.
  *
  * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
  *      forwarding of preauth frames over the control port. They are then
  *      handled as ordinary data frames.
  *
  * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
  *
  * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
  *      in IBSS mode, essentially by dropping their state.
  *
  * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
  *      are possible for multicast frames and those will be reported properly.
  *
  * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
  *      reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
  *      report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
  *      included in the scan request.
  *
  * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
  *      can report tx status for control port over nl80211 tx operations.
  *
  * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating
  *      Channel Validation (OCV) when using driver's SME for RSNA handshakes.
  *
  * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way
  *      handshake with PSK in AP mode (PSK is passed as part of the start AP
  *      command).
  *
  * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
  *      in AP mode (SAE password is passed as part of the start AP command).
  *
  * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
  *      frames transmission
  *
  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
  *      unsolicited broadcast probe response transmission
  *
  * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
  *      configuration (AP/mesh) with HE rates.
  *
  * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
  *      exchange protocol.
  *
  * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
  *      exchange protocol.
  *
  * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
  *      frame protection for all management frames exchanged during the
  *      negotiation and range measurement procedure.
  *
  * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
  *      detection and change announcemnts.
  *
  * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
  *      FILS encryption and decryption for (Re)Association Request and Response
  *      frames. Userspace has to share FILS AAD details to the driver by using
  *      @NL80211_CMD_SET_FILS_AAD.
  *
  * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC
  *      detection.
  *
  * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address
  *      change without having to bring the underlying network device down
  *      first. For example, in station mode this can be used to vary the
  *      origin MAC address prior to a connection to a new AP for privacy
  *      or other reasons. Note that certain driver specific restrictions
  *      might apply, e.g. no scans in progress, no offchannel operations
  *      in progress, and no active connections.
  *
  * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode.
  *
  * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables
  *      authentication, data encryption and message integrity.
  *
  * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA
  *      in authentication and deauthentication frames sent to unassociated peer
  *      using @NL80211_CMD_FRAME.
  *
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE
  *      handling in station mode.
  *
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
  *      handling in AP mode.
  *
  * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
  *      ad hoc operation on DFS channels under the control of a concurrent
  *      DFS master on the same channel as described in FCC-594280 D01
  *      (Section B.3). This, for example, allows P2P GO and P2P clients to
  *      operate on DFS channels as long as there's a concurrent BSS connection.
  *
  * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
  *      (signaling and payload protected) A-MSDUs and this shall be advertised
  *      in the RSNXE.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
 enum nl80211_ext_feature_index {
         NL80211_EXT_FEATURE_VHT_IBSS,
         NL80211_EXT_FEATURE_RRM,
         NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,
         NL80211_EXT_FEATURE_SCAN_START_TIME,
         NL80211_EXT_FEATURE_BSS_PARENT_TSF,
         NL80211_EXT_FEATURE_SET_SCAN_DWELL,
         NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
         NL80211_EXT_FEATURE_BEACON_RATE_HT,
         NL80211_EXT_FEATURE_BEACON_RATE_VHT,
         NL80211_EXT_FEATURE_FILS_STA,
         NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
         NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
         NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
         NL80211_EXT_FEATURE_CQM_RSSI_LIST,
         NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
         NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
         NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
         NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
         NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
         NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
         NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
         NL80211_EXT_FEATURE_MFP_OPTIONAL,
         NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
         NL80211_EXT_FEATURE_LOW_POWER_SCAN,
         NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
         NL80211_EXT_FEATURE_DFS_OFFLOAD,
         NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
         NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
         /* we renamed this - stay compatible */
         NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
         NL80211_EXT_FEATURE_TXQS,
         NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
         NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
         NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
         NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
         NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
         NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
         NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
         NL80211_EXT_FEATURE_EXT_KEY_ID,
         NL80211_EXT_FEATURE_STA_TX_PWR,
         NL80211_EXT_FEATURE_SAE_OFFLOAD,
         NL80211_EXT_FEATURE_VLAN_OFFLOAD,
         NL80211_EXT_FEATURE_AQL,
         NL80211_EXT_FEATURE_BEACON_PROTECTION,
         NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
         NL80211_EXT_FEATURE_PROTECTED_TWT,
         NL80211_EXT_FEATURE_DEL_IBSS_STA,
         NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
         NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
         NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
         NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
         NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
         NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
         NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
         NL80211_EXT_FEATURE_FILS_DISCOVERY,
         NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
         NL80211_EXT_FEATURE_BEACON_RATE_HE,
         NL80211_EXT_FEATURE_SECURE_LTF,
         NL80211_EXT_FEATURE_SECURE_RTT,
         NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
         NL80211_EXT_FEATURE_BSS_COLOR,
         NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
         NL80211_EXT_FEATURE_RADAR_BACKGROUND,
         NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE,
         NL80211_EXT_FEATURE_PUNCT,
         NL80211_EXT_FEATURE_SECURE_NAN,
         NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
         NL80211_EXT_FEATURE_OWE_OFFLOAD,
         NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
         NL80211_EXT_FEATURE_DFS_CONCURRENT,
         NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
 
         /* add new features before the definition below */
         NUM_NL80211_EXT_FEATURES,
         MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
 };
 
 /**
  * enum nl80211_probe_resp_offload_support_attr - optional supported
  *      protocols for probe-response offloading by the driver/FW.
  *      To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
  *      Each enum value represents a bit in the bitmap of supported
  *      protocols. Typically a subset of probe-requests belonging to a
  *      supported protocol will be excluded from offload and uploaded
  *      to the host.
  *
  * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
  * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
  * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
  * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
  */
 enum nl80211_probe_resp_offload_support_attr {
         NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =        1<<0,
         NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =       1<<1,
         NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =        1<<2,
         NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =     1<<3,
 };
 
 /**
  * enum nl80211_connect_failed_reason - connection request failed reasons
  * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
  *      handled by the AP is reached.
  * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
  */
 enum nl80211_connect_failed_reason {
         NL80211_CONN_FAIL_MAX_CLIENTS,
         NL80211_CONN_FAIL_BLOCKED_CLIENT,
 };
 
 /**
  * enum nl80211_timeout_reason - timeout reasons
  *
  * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
  * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
  * @NL80211_TIMEOUT_AUTH: Authentication timed out.
  * @NL80211_TIMEOUT_ASSOC: Association timed out.
  */
 enum nl80211_timeout_reason {
         NL80211_TIMEOUT_UNSPECIFIED,
         NL80211_TIMEOUT_SCAN,
         NL80211_TIMEOUT_AUTH,
         NL80211_TIMEOUT_ASSOC,
 };
 
 /**
  * enum nl80211_scan_flags -  scan request control flags
  *
  * Scan request control flags are used to control the handling
  * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
  * requests.
  *
  * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
  * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
  * one of them can be used in the request.
  *
  * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
  * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
  * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
  *      as AP and the beaconing has already been configured. This attribute is
  *      dangerous because will destroy stations performance as a lot of frames
  *      will be lost while scanning off-channel, therefore it must be used only
  *      when really needed
  * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
  *      for scheduled scan: a different one for every scan iteration). When the
  *      flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
  *      @NL80211_ATTR_MAC_MASK attributes may also be given in which case only
  *      the masked bits will be preserved from the MAC address and the remainder
  *      randomised. If the attributes are not given full randomisation (46 bits,
  *      locally administered 1, multicast 0) is assumed.
  *      This flag must not be requested when the feature isn't supported, check
  *      the nl80211 feature flags for the device.
  * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
  *      request parameters IE in the probe request
  * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
  *      rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
  *      only the first probe req in the channel will be sent in high rate.
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
  *      tx deferral (dot11FILSProbeDelay shall be set to 15ms)
  *      and suppression (if it has received a broadcast Probe Response frame,
  *      Beacon frame or FILS Discovery frame from an AP that the STA considers
  *      a suitable candidate for (re-)association - suitable in terms of
  *      SSID and/or RSSI.
  * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
  *      accomplish the scan. Thus, this flag intends the driver to perform the
  *      scan request with lesser span/duration. It is specific to the driver
  *      implementations on how this is accomplished. Scan accuracy may get
  *      impacted with this flag.
  * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
  *      optimal possible power. Drivers can resort to their specific means to
  *      optimize the power. Scan accuracy may get impacted with this flag.
  * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
  *      results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
  *      possible scan results. This flag hints the driver to use the best
  *      possible scan configuration to improve the accuracy in scanning.
  *      Latency and power use may get impacted with this flag.
  * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
  *      request frames from this scan to avoid correlation/tracking being
  *      possible.
  * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
  *      only have supported rates and no additional capabilities (unless
  *      added by userspace explicitly.)
  * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
  *      %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
  *      %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
  * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by
  *      2.4/5 GHz APs. When the flag is set, the scan logic will use the
  *      information from the RNR element found in beacons/probe responses
  *      received on the 2.4/5 GHz channels to actively scan only the 6GHz
  *      channels on which APs are expected to be found. Note that when not set,
  *      the scan logic would scan all 6GHz channels, but since transmission of
  *      probe requests on non-PSC channels is limited, it is highly likely that
  *      these channels would passively be scanned. Also note that when the flag
  *      is set, in addition to the colocated APs, PSC channels would also be
  *      scanned if the user space has asked for it.
  */
 enum nl80211_scan_flags {
         NL80211_SCAN_FLAG_LOW_PRIORITY                          = 1<<0,
         NL80211_SCAN_FLAG_FLUSH                                 = 1<<1,
         NL80211_SCAN_FLAG_AP                                    = 1<<2,
         NL80211_SCAN_FLAG_RANDOM_ADDR                           = 1<<3,
         NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME                 = 1<<4,
         NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP               = 1<<5,
         NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE            = 1<<6,
         NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION    = 1<<7,
         NL80211_SCAN_FLAG_LOW_SPAN                              = 1<<8,
         NL80211_SCAN_FLAG_LOW_POWER                             = 1<<9,
         NL80211_SCAN_FLAG_HIGH_ACCURACY                         = 1<<10,
         NL80211_SCAN_FLAG_RANDOM_SN                             = 1<<11,
         NL80211_SCAN_FLAG_MIN_PREQ_CONTENT                      = 1<<12,
         NL80211_SCAN_FLAG_FREQ_KHZ                              = 1<<13,
         NL80211_SCAN_FLAG_COLOCATED_6GHZ                        = 1<<14,
 };
 
 /**
  * enum nl80211_acl_policy - access control policy
  *
  * Access control policy is applied on a MAC list set by
  * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
  * be used with %NL80211_ATTR_ACL_POLICY.
  *
  * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
  *      listed in ACL, i.e. allow all the stations which are not listed
  *      in ACL to authenticate.
  * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
  *      in ACL, i.e. deny all the stations which are not listed in ACL.
  */
 enum nl80211_acl_policy {
         NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
         NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
 };
 
 /**
  * enum nl80211_smps_mode - SMPS mode
  *
  * Requested SMPS mode (for AP mode)
  *
  * @NL80211_SMPS_OFF: SMPS off (use all antennas).
  * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)
  * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and
  *      turn on other antennas after CTS/RTS).
  * @__NL80211_SMPS_AFTER_LAST: internal
  * @NL80211_SMPS_MAX: highest used enumeration
  */
 enum nl80211_smps_mode {
         NL80211_SMPS_OFF,
         NL80211_SMPS_STATIC,
         NL80211_SMPS_DYNAMIC,
 
         __NL80211_SMPS_AFTER_LAST,
         NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_radar_event - type of radar event for DFS operation
  *
  * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace
  * about detected radars or success of the channel available check (CAC)
  *
  * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is
  *      now unusable.
  * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,
  *      the channel is now available.
  * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no
  *      change to the channel status.
  * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
  *      over, channel becomes usable.
  * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
  *      non-operating channel is expired and no longer valid. New CAC must
  *      be done on this channel before starting the operation. This is not
  *      applicable for ETSI dfs domain where pre-CAC is valid for ever.
  * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,
  *      should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.
  */
 enum nl80211_radar_event {
         NL80211_RADAR_DETECTED,
         NL80211_RADAR_CAC_FINISHED,
         NL80211_RADAR_CAC_ABORTED,
         NL80211_RADAR_NOP_FINISHED,
         NL80211_RADAR_PRE_CAC_EXPIRED,
         NL80211_RADAR_CAC_STARTED,
 };
 
 /**
  * enum nl80211_dfs_state - DFS states for channels
  *
  * Channel states used by the DFS code.
  *
  * @NL80211_DFS_USABLE: The channel can be used, but channel availability
  *      check (CAC) must be performed before using it for AP or IBSS.
  * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it
  *      is therefore marked as not available.
  * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available.
  */
 enum nl80211_dfs_state {
         NL80211_DFS_USABLE,
         NL80211_DFS_UNAVAILABLE,
         NL80211_DFS_AVAILABLE,
 };
 
 /**
  * enum nl80211_protocol_features - nl80211 protocol features
  * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
  *      wiphy dumps (if requested by the application with the attribute
  *      %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
  *      wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
  *      %NL80211_ATTR_WDEV.
  */
 enum nl80211_protocol_features {
         NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP =     1 << 0,
 };
 
 /**
  * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers
  *
  * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified.
  * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol.
  * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol.
  * @NL80211_CRIT_PROTO_APIPA: APIPA protocol.
  * @NUM_NL80211_CRIT_PROTO: must be kept last.
  */
 enum nl80211_crit_proto_id {
         NL80211_CRIT_PROTO_UNSPEC,
         NL80211_CRIT_PROTO_DHCP,
         NL80211_CRIT_PROTO_EAPOL,
         NL80211_CRIT_PROTO_APIPA,
         /* add other protocols before this one */
         NUM_NL80211_CRIT_PROTO
 };
 
 /* maximum duration for critical protocol measures */
 #define NL80211_CRIT_PROTO_MAX_DURATION         5000 /* msec */
 
 /**
  * enum nl80211_rxmgmt_flags - flags for received management frame.
  *
  * Used by cfg80211_rx_mgmt()
  *
  * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
  * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
  *      the authentication. Exclusively defined for host drivers that
  *      advertises the SME functionality but would like the userspace
  *      to handle certain authentication algorithms (e.g. SAE).
  */
 enum nl80211_rxmgmt_flags {
         NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
         NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
 };
 
 /*
  * If this flag is unset, the lower 24 bits are an OUI, if set
  * a Linux nl80211 vendor ID is used (no such IDs are allocated
  * yet, so that's not valid so far)
  */
 #define NL80211_VENDOR_ID_IS_LINUX      0x80000000
 
 /**
  * struct nl80211_vendor_cmd_info - vendor command data
  * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the
  *      value is a 24-bit OUI; if it is set then a separately allocated ID
  *      may be used, but no such IDs are allocated yet. New IDs should be
  *      added to this file when needed.
  * @subcmd: sub-command ID for the command
  */
 struct nl80211_vendor_cmd_info {
         __u32 vendor_id;
         __u32 subcmd;
 };
 
 /**
  * enum nl80211_tdls_peer_capability - TDLS peer flags.
  *
  * Used by tdls_mgmt() to determine which conditional elements need
  * to be added to TDLS Setup frames.
  *
  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
  * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
  */
 enum nl80211_tdls_peer_capability {
         NL80211_TDLS_PEER_HT = 1<<0,
         NL80211_TDLS_PEER_VHT = 1<<1,
         NL80211_TDLS_PEER_WMM = 1<<2,
         NL80211_TDLS_PEER_HE = 1<<3,
 };
 
 /**
  * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
  * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
  *      seconds (u32).
  * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
  *      scan plan (u32). The last scan plan must not specify this attribute
  *      because it will run infinitely. A value of zero is invalid as it will
  *      make the scan plan meaningless.
  * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
  *      currently defined
  * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
  */
 enum nl80211_sched_scan_plan {
         __NL80211_SCHED_SCAN_PLAN_INVALID,
         NL80211_SCHED_SCAN_PLAN_INTERVAL,
         NL80211_SCHED_SCAN_PLAN_ITERATIONS,
 
         /* keep last */
         __NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
         NL80211_SCHED_SCAN_PLAN_MAX =
                 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
 };
 
 /**
  * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
  *
  * @band: band of BSS that must match for RSSI value adjustment. The value
  *      of this field is according to &enum nl80211_band.
  * @delta: value used to adjust the RSSI value of matching BSS in dB.
  */
 struct nl80211_bss_select_rssi_adjust {
         __u8 band;
         __s8 delta;
 } __attribute__((packed));
 
 /**
  * enum nl80211_bss_select_attr - attributes for bss selection.
  *
  * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.
  * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection
  *      is requested.
  * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
  *      selection should be done such that the specified band is preferred.
  *      When there are multiple BSS-es in the preferred band, the driver
  *      shall use RSSI-based BSS selection as a second step. The value of
  *      this attribute is according to &enum nl80211_band (u32).
  * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for
  *      BSS-es in the specified band is to be adjusted before doing
  *      RSSI-based BSS selection. The attribute value is a packed structure
  *      value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
  * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.
  *
  * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT
  * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour
  * which the driver shall use.
  */
 enum nl80211_bss_select_attr {
         __NL80211_BSS_SELECT_ATTR_INVALID,
         NL80211_BSS_SELECT_ATTR_RSSI,
         NL80211_BSS_SELECT_ATTR_BAND_PREF,
         NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,
 
         /* keep last */
         __NL80211_BSS_SELECT_ATTR_AFTER_LAST,
         NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_nan_function_type - NAN function type
  *
  * Defines the function type of a NAN function
  *
  * @NL80211_NAN_FUNC_PUBLISH: function is publish
  * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
  * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
  * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use
  * @NL80211_NAN_FUNC_MAX_TYPE: internal use
  */
 enum nl80211_nan_function_type {
         NL80211_NAN_FUNC_PUBLISH,
         NL80211_NAN_FUNC_SUBSCRIBE,
         NL80211_NAN_FUNC_FOLLOW_UP,
 
         /* keep last */
         __NL80211_NAN_FUNC_TYPE_AFTER_LAST,
         NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
 };
 
 /**
  * enum nl80211_nan_publish_type - NAN publish tx type
  *
  * Defines how to send publish Service Discovery Frames
  *
  * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
  * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
  */
 enum nl80211_nan_publish_type {
         NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
         NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
 };
 
 /**
  * enum nl80211_nan_func_term_reason - NAN functions termination reason
  *
  * Defines termination reasons of a NAN function
  *
  * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
  * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
  * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
  */
 enum nl80211_nan_func_term_reason {
         NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
         NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
         NL80211_NAN_FUNC_TERM_REASON_ERROR,
 };
 
 #define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
 #define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
 #define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
 
 /**
  * enum nl80211_nan_func_attributes - NAN function attributes
  * @__NL80211_NAN_FUNC_INVALID: invalid
  * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
  * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
  *      specified in NAN spec. This is a binary attribute.
  * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
  *      publish. Defines the transmission type for the publish Service Discovery
  *      Frame, see &enum nl80211_nan_publish_type. Its type is u8.
  * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
  *      publish. Should the solicited publish Service Discovery Frame be sent to
  *      the NAN Broadcast address. This is a flag.
  * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
  *      subscribe. Is the subscribe active. This is a flag.
  * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
  *      The instance ID for the follow up Service Discovery Frame. This is u8.
  * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
  *      is follow up. This is a u8.
  *      The requester instance ID for the follow up Service Discovery Frame.
  * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
  *      follow up Service Discovery Frame. This is a binary attribute.
  * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
  *      close range. The range itself (RSSI) is defined by the device.
  *      This is a flag.
  * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
  *      stay active. If not present infinite TTL is assumed. This is a u32.
  * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
  *      specific info. This is a binary attribute.
  * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
  *      See &enum nl80211_nan_srf_attributes.
  * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
  *      attribute. It is a list of binary values.
  * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
  *      nested attribute. It is a list of binary values.
  * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
  *      Its type is u8 and it cannot be 0.
  * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
  *      See &enum nl80211_nan_func_term_reason.
  *
  * @NUM_NL80211_NAN_FUNC_ATTR: internal
  * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
  */
 enum nl80211_nan_func_attributes {
         __NL80211_NAN_FUNC_INVALID,
         NL80211_NAN_FUNC_TYPE,
         NL80211_NAN_FUNC_SERVICE_ID,
         NL80211_NAN_FUNC_PUBLISH_TYPE,
         NL80211_NAN_FUNC_PUBLISH_BCAST,
         NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
         NL80211_NAN_FUNC_FOLLOW_UP_ID,
         NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
         NL80211_NAN_FUNC_FOLLOW_UP_DEST,
         NL80211_NAN_FUNC_CLOSE_RANGE,
         NL80211_NAN_FUNC_TTL,
         NL80211_NAN_FUNC_SERVICE_INFO,
         NL80211_NAN_FUNC_SRF,
         NL80211_NAN_FUNC_RX_MATCH_FILTER,
         NL80211_NAN_FUNC_TX_MATCH_FILTER,
         NL80211_NAN_FUNC_INSTANCE_ID,
         NL80211_NAN_FUNC_TERM_REASON,
 
         /* keep last */
         NUM_NL80211_NAN_FUNC_ATTR,
         NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
 };
 
 /**
  * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
  * @__NL80211_NAN_SRF_INVALID: invalid
  * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
  *      This is a flag.
  * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
  *      %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
  * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
  *      %NL80211_NAN_SRF_BF is present. This is a u8.
  * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
  *      and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
  *      attribute. Each nested attribute is a MAC address.
  * @NUM_NL80211_NAN_SRF_ATTR: internal
  * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
  */
 enum nl80211_nan_srf_attributes {
         __NL80211_NAN_SRF_INVALID,
         NL80211_NAN_SRF_INCLUDE,
         NL80211_NAN_SRF_BF,
         NL80211_NAN_SRF_BF_IDX,
         NL80211_NAN_SRF_MAC_ADDRS,
 
         /* keep last */
         NUM_NL80211_NAN_SRF_ATTR,
         NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
 };
 
 /**
  * enum nl80211_nan_match_attributes - NAN match attributes
  * @__NL80211_NAN_MATCH_INVALID: invalid
  * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
  *      match. This is a nested attribute.
  *      See &enum nl80211_nan_func_attributes.
  * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
  *      that caused the match. This is a nested attribute.
  *      See &enum nl80211_nan_func_attributes.
  *
  * @NUM_NL80211_NAN_MATCH_ATTR: internal
  * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
  */
 enum nl80211_nan_match_attributes {
         __NL80211_NAN_MATCH_INVALID,
         NL80211_NAN_MATCH_FUNC_LOCAL,
         NL80211_NAN_MATCH_FUNC_PEER,
 
         /* keep last */
         NUM_NL80211_NAN_MATCH_ATTR,
         NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
 };
 
 /**
  * enum nl80211_external_auth_action - Action to perform with external
  *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
  * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
  * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
  */
 enum nl80211_external_auth_action {
         NL80211_EXTERNAL_AUTH_START,
         NL80211_EXTERNAL_AUTH_ABORT,
 };
 
 /**
  * enum nl80211_ftm_responder_attributes - fine timing measurement
  *      responder attributes
  * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid
  * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled
  * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
  *      (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
  *      i.e. starting with the measurement token
  * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element
  *      (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
  *      i.e. starting with the measurement token
  * @__NL80211_FTM_RESP_ATTR_LAST: Internal
  * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
  */
 enum nl80211_ftm_responder_attributes {
         __NL80211_FTM_RESP_ATTR_INVALID,
 
         NL80211_FTM_RESP_ATTR_ENABLED,
         NL80211_FTM_RESP_ATTR_LCI,
         NL80211_FTM_RESP_ATTR_CIVICLOC,
 
         /* keep last */
         __NL80211_FTM_RESP_ATTR_LAST,
         NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,
 };
 
 /*
  * enum nl80211_ftm_responder_stats - FTM responder statistics
  *
  * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
  * when getting FTM responder statistics.
  *
  * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
  * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames
  *      were ssfully answered (u32)
  * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the
  *      frames were successfully answered (u32)
  * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)
  * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)
  * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)
  * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an
  *      indication of how much time the responder was busy (u64, msec)
  * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -
  *      triggers from initiators that didn't finish successfully the negotiation
  *      phase with the responder (u32)
  * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests
  *      - initiator asks for a new scheduling although it already has scheduled
  *      FTM slot (u32)
  * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of
  *      scheduled window (u32)
  * @NL80211_FTM_STATS_PAD: used for padding, ignore
  * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
  * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
  */
 enum nl80211_ftm_responder_stats {
         __NL80211_FTM_STATS_INVALID,
         NL80211_FTM_STATS_SUCCESS_NUM,
         NL80211_FTM_STATS_PARTIAL_NUM,
         NL80211_FTM_STATS_FAILED_NUM,
         NL80211_FTM_STATS_ASAP_NUM,
         NL80211_FTM_STATS_NON_ASAP_NUM,
         NL80211_FTM_STATS_TOTAL_DURATION_MSEC,
         NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,
         NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,
         NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,
         NL80211_FTM_STATS_PAD,
 
         /* keep last */
         __NL80211_FTM_STATS_AFTER_LAST,
         NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1
 };
 
 /**
  * enum nl80211_preamble - frame preamble types
  * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble
  * @NL80211_PREAMBLE_HT: HT preamble
  * @NL80211_PREAMBLE_VHT: VHT preamble
  * @NL80211_PREAMBLE_DMG: DMG preamble
  * @NL80211_PREAMBLE_HE: HE preamble
  */
 enum nl80211_preamble {
         NL80211_PREAMBLE_LEGACY,
         NL80211_PREAMBLE_HT,
         NL80211_PREAMBLE_VHT,
         NL80211_PREAMBLE_DMG,
         NL80211_PREAMBLE_HE,
 };
 
 /**
  * enum nl80211_peer_measurement_type - peer measurement types
  * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use
  *      these numbers also for attributes
  *
  * @NL80211_PMSR_TYPE_FTM: flight time measurement
  *
  * @NUM_NL80211_PMSR_TYPES: internal
  * @NL80211_PMSR_TYPE_MAX: highest type number
  */
 enum nl80211_peer_measurement_type {
         NL80211_PMSR_TYPE_INVALID,
 
         NL80211_PMSR_TYPE_FTM,
 
         NUM_NL80211_PMSR_TYPES,
         NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1
 };
 
 /**
  * enum nl80211_peer_measurement_status - peer measurement status
  * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully
  * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused
  * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out
  * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent
  *      reason may be available in the response data
  */
 enum nl80211_peer_measurement_status {
         NL80211_PMSR_STATUS_SUCCESS,
         NL80211_PMSR_STATUS_REFUSED,
         NL80211_PMSR_STATUS_TIMEOUT,
         NL80211_PMSR_STATUS_FAILURE,
 };
 
 /**
  * enum nl80211_peer_measurement_req - peer measurement request attributes
  * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
  *      type-specific request data inside. The attributes used are from the
  *      enums named nl80211_peer_measurement_<type>_req.
  * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported
  *      (flag attribute)
  *
  * @NUM_NL80211_PMSR_REQ_ATTRS: internal
  * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_req {
         __NL80211_PMSR_REQ_ATTR_INVALID,
 
         NL80211_PMSR_REQ_ATTR_DATA,
         NL80211_PMSR_REQ_ATTR_GET_AP_TSF,
 
         /* keep last */
         NUM_NL80211_PMSR_REQ_ATTRS,
         NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1
 };
 
 /**
  * enum nl80211_peer_measurement_resp - peer measurement response attributes
  * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
  *      type-specific results inside. The attributes used are from the enums
  *      named nl80211_peer_measurement_<type>_resp.
  * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status
  *      (using values from &enum nl80211_peer_measurement_status.)
  * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the
  *      result was measured; this value is not expected to be accurate to
  *      more than 20ms. (u64, nanoseconds)
  * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface
  *      doing the measurement is connected to when the result was measured.
  *      This shall be accurately reported if supported and requested
  *      (u64, usec)
  * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially
  *      (*e.g. with FTM per-burst data) this flag will be cleared on all but
  *      the last result; if all results are combined it's set on the single
  *      result.
  * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore
  *
  * @NUM_NL80211_PMSR_RESP_ATTRS: internal
  * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_resp {
         __NL80211_PMSR_RESP_ATTR_INVALID,
 
         NL80211_PMSR_RESP_ATTR_DATA,
         NL80211_PMSR_RESP_ATTR_STATUS,
         NL80211_PMSR_RESP_ATTR_HOST_TIME,
         NL80211_PMSR_RESP_ATTR_AP_TSF,
         NL80211_PMSR_RESP_ATTR_FINAL,
         NL80211_PMSR_RESP_ATTR_PAD,
 
         /* keep last */
         NUM_NL80211_PMSR_RESP_ATTRS,
         NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1
 };
 
 /**
  * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement
  * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address
  * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level
  *      attributes like %NL80211_ATTR_WIPHY_FREQ etc.
  * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
  *      measurement type, with attributes from the
  *      &enum nl80211_peer_measurement_req inside.
  * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
  *      measurement type, with attributes from the
  *      &enum nl80211_peer_measurement_resp inside.
  *
  * @NUM_NL80211_PMSR_PEER_ATTRS: internal
  * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_peer_attrs {
         __NL80211_PMSR_PEER_ATTR_INVALID,
 
         NL80211_PMSR_PEER_ATTR_ADDR,
         NL80211_PMSR_PEER_ATTR_CHAN,
         NL80211_PMSR_PEER_ATTR_REQ,
         NL80211_PMSR_PEER_ATTR_RESP,
 
         /* keep last */
         NUM_NL80211_PMSR_PEER_ATTRS,
         NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1,
 };
 
 /**
  * enum nl80211_peer_measurement_attrs - peer measurement attributes
  * @__NL80211_PMSR_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
  *      advertisement only, indicates the maximum number of peers
  *      measurements can be done with in a single request
  * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
  *      indicating that the connected AP's TSF can be reported in
  *      measurement results
  * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
  *      indicating that MAC address randomization is supported.
  * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device,
  *      this contains a nesting indexed by measurement type, and
  *      type-specific capabilities inside, which are from the enums
  *      named nl80211_peer_measurement_<type>_capa.
  * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
  *      meaningless, just a list of peers to measure with, with the
  *      sub-attributes taken from
  *      &enum nl80211_peer_measurement_peer_attrs.
  *
  * @NUM_NL80211_PMSR_ATTR: internal
  * @NL80211_PMSR_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_attrs {
         __NL80211_PMSR_ATTR_INVALID,
 
         NL80211_PMSR_ATTR_MAX_PEERS,
         NL80211_PMSR_ATTR_REPORT_AP_TSF,
         NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,
         NL80211_PMSR_ATTR_TYPE_CAPA,
         NL80211_PMSR_ATTR_PEERS,
 
         /* keep last */
         NUM_NL80211_PMSR_ATTR,
         NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1
 };
 
 /**
  * enum nl80211_peer_measurement_ftm_capa - FTM capabilities
  * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
  *      is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
  *      mode is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
  *      data can be requested during the measurement
  * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
  *      location data can be requested during the measurement
  * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
  *      from &enum nl80211_preamble.
  * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from
  *      &enum nl80211_chan_width indicating the supported channel
  *      bandwidths for FTM. Note that a higher channel bandwidth may be
  *      configured to allow for other measurements types with different
  *      bandwidth requirement in the same measurement.
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
  *      the maximum bursts exponent that can be used (if not present anything
  *      is valid)
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
  *      the maximum FTMs per burst (if not present anything is valid)
  * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
  *      trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
  *      if non-trigger-based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_ftm_capa {
         __NL80211_PMSR_FTM_CAPA_ATTR_INVALID,
 
         NL80211_PMSR_FTM_CAPA_ATTR_ASAP,
         NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP,
         NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI,
         NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC,
         NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES,
         NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
         NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
         NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
         NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
         NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
 
         /* keep last */
         NUM_NL80211_PMSR_FTM_CAPA_ATTR,
         NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1
 };
 
 /**
  * enum nl80211_peer_measurement_ftm_req - FTM request attributes
  * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag)
  * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see
  *      &enum nl80211_preamble), optional for DMG (u32)
  * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in
  *      802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"
  *      (u8, 0-15, optional with default 15 i.e. "no preference")
  * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units
  *      of 100ms (u16, optional with default 0)
  * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016
  *      Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with
  *      default 15 i.e. "no preference")
  * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
  *      requested per burst
  *      (u8, 0-31, optional with default 0 i.e. "no preference")
  * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries
  *      (u8, default 3)
  * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
  * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
  *      (flag)
  * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
  *      measurement (flag).
  *      This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
  *      mutually exclusive.
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *      %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *      ranging will be used.
  * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
  *      ranging measurement (flag)
  *      This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
  *      mutually exclusive.
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *      %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *      ranging will be used.
  * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
  *      valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
  *      %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
  * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the
  *      responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
  *      or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.
  *
  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_ftm_req {
         __NL80211_PMSR_FTM_REQ_ATTR_INVALID,
 
         NL80211_PMSR_FTM_REQ_ATTR_ASAP,
         NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE,
         NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP,
         NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD,
         NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION,
         NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST,
         NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
         NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
         NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
         NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
         NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
         NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
         NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
 
         /* keep last */
         NUM_NL80211_PMSR_FTM_REQ_ATTR,
         NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1
 };
 
 /**
  * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons
  * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used
  * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder
  * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement
  * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is
  *      on a different channel, so can't measure (if we didn't know, we'd
  *      try and get no response)
  * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM
  * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps
  *      received
  * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry
  *      later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME)
  * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed
  *      by the peer and are no longer supported
  */
 enum nl80211_peer_measurement_ftm_failure_reasons {
         NL80211_PMSR_FTM_FAILURE_UNSPECIFIED,
         NL80211_PMSR_FTM_FAILURE_NO_RESPONSE,
         NL80211_PMSR_FTM_FAILURE_REJECTED,
         NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL,
         NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE,
         NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP,
         NL80211_PMSR_FTM_FAILURE_PEER_BUSY,
         NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS,
 };
 
 /**
  * enum nl80211_peer_measurement_ftm_resp - FTM response attributes
  * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid
  *
  * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason
  *      (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported
  *      as separate results then it will be the burst index 0...(N-1) and
  *      the top level will indicate partial results (u32)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
  *      transmitted (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
  *      that were acknowledged (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
  *      busy peer (u32, seconds)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
  *      used by the responder (similar to request, u8)
  * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by
  *      the responder (similar to request, u8)
  * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used
  *      by the responder (similar to request, u8)
  * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action
  *      frames (optional, s32, 1/2 dBm)
  * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action
  *      frames (optional, s32, 1/2 dBm)
  * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the
  *      FTM action frame (optional, nested, using &enum nl80211_rate_info
  *      attributes)
  * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM
  *      action frame (optional, nested, using &enum nl80211_rate_info attrs)
  * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional
  *      but one of RTT/DIST must be present)
  * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that
  *      standard deviation is the square root of variance, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds,
  *      optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional
  *      but one of RTT/DIST must be present)
  * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note
  *      that standard deviation is the square root of variance, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional);
  *      this is the contents of the Measurement Report Element (802.11-2016
  *      9.4.2.22.1) starting with the Measurement Token, with Measurement
  *      Type 8.
  * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer
  *      (binary, optional);
  *      this is the contents of the Measurement Report Element (802.11-2016
  *      9.4.2.22.1) starting with the Measurement Token, with Measurement
  *      Type 11.
  * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
  *
  * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
  * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
  */
 enum nl80211_peer_measurement_ftm_resp {
         __NL80211_PMSR_FTM_RESP_ATTR_INVALID,
 
         NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,
         NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX,
         NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS,
         NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES,
         NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,
         NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP,
         NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION,
         NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST,
         NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG,
         NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD,
         NL80211_PMSR_FTM_RESP_ATTR_TX_RATE,
         NL80211_PMSR_FTM_RESP_ATTR_RX_RATE,
         NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG,
         NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE,
         NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD,
         NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG,
         NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE,
         NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD,
         NL80211_PMSR_FTM_RESP_ATTR_LCI,
         NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
         NL80211_PMSR_FTM_RESP_ATTR_PAD,
 
         /* keep last */
         NUM_NL80211_PMSR_FTM_RESP_ATTR,
         NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
 };
 
 /**
  * enum nl80211_obss_pd_attributes - OBSS packet detection attributes
  * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
  *
  * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
  * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
  * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
  *      tx power offset.
  * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
  *      values used by members of the SRG.
  * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
  *      BSSID values used by members of the SRG.
  * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
  *
  * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
  * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
  */
 enum nl80211_obss_pd_attributes {
         __NL80211_HE_OBSS_PD_ATTR_INVALID,
 
         NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
         NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
         NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
         NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
         NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
         NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
 
         /* keep last */
         __NL80211_HE_OBSS_PD_ATTR_LAST,
         NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
 };
 
 /**
  * enum nl80211_bss_color_attributes - BSS Color attributes
  * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
  *
  * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
  * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
  * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
  *
  * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
  * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
  */
 enum nl80211_bss_color_attributes {
         __NL80211_HE_BSS_COLOR_ATTR_INVALID,
 
         NL80211_HE_BSS_COLOR_ATTR_COLOR,
         NL80211_HE_BSS_COLOR_ATTR_DISABLED,
         NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
 
         /* keep last */
         __NL80211_HE_BSS_COLOR_ATTR_LAST,
         NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
 };
 
 /**
  * enum nl80211_iftype_akm_attributes - interface type AKM attributes
  * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
  *
  * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
  *      attribute for each interface type that supports AKM suites specified in
  *      %NL80211_IFTYPE_AKM_ATTR_SUITES
  * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
  *      AKM suites for the specified interface types.
  *
  * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
  * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
  */
 enum nl80211_iftype_akm_attributes {
         __NL80211_IFTYPE_AKM_ATTR_INVALID,
 
         NL80211_IFTYPE_AKM_ATTR_IFTYPES,
         NL80211_IFTYPE_AKM_ATTR_SUITES,
 
         /* keep last */
         __NL80211_IFTYPE_AKM_ATTR_LAST,
         NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
 };
 
 /**
  * enum nl80211_fils_discovery_attributes - FILS discovery configuration
  * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
  *
  * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
  *
  * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
  *      Allowed range: 0..10000 (TU = Time Unit)
  * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
  *      Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled.
  * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
  *      frame including the headers.
  *
  * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
  * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
  */
 enum nl80211_fils_discovery_attributes {
         __NL80211_FILS_DISCOVERY_ATTR_INVALID,
 
         NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
         NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
         NL80211_FILS_DISCOVERY_ATTR_TMPL,
 
         /* keep last */
         __NL80211_FILS_DISCOVERY_ATTR_LAST,
         NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
 };
 
 /*
  * FILS discovery template minimum length with action frame headers and
  * mandatory fields.
  */
 #define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
 
 /**
  * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
  *      response configuration. Applicable only in 6GHz.
  *
  * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
  *
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
  *      Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
  *      26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is
  *      disabled.
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
  *      frame template (binary).
  *
  * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
  */
 enum nl80211_unsol_bcast_probe_resp_attributes {
         __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
 
         NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
         NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
 
         /* keep last */
         __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
         NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
                 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
 };
 
 /**
  * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
  *      derivation. Applicable only when WPA3-Personal SAE authentication is
  *      used.
  *
  * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
  *      attribute is not present from userspace.
  * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
  * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
  * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
  *      can be used.
  */
 enum nl80211_sae_pwe_mechanism {
         NL80211_SAE_PWE_UNSPECIFIED,
         NL80211_SAE_PWE_HUNT_AND_PECK,
         NL80211_SAE_PWE_HASH_TO_ELEMENT,
         NL80211_SAE_PWE_BOTH,
 };
 
 /**
  * enum nl80211_sar_type - type of SAR specs
  *
  * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
  *
  * @NUM_NL80211_SAR_TYPE: internal
  */
 enum nl80211_sar_type {
         NL80211_SAR_TYPE_POWER,
 
         /* add new type here */
 
         /* Keep last */
         NUM_NL80211_SAR_TYPE,
 };
 
 /**
  * enum nl80211_sar_attrs - Attributes for SAR spec
  *
  * @__NL80211_SAR_ATTR_INVALID: Invalid
  *
  * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
  *
  * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
  *      limit specifications. Each specification contains a set
  *      of %nl80211_sar_specs_attrs.
  *
  *      For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
  *      and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
  *
  *      For sar_capa dump, it contains array of
  *      %NL80211_SAR_ATTR_SPECS_START_FREQ
  *      and %NL80211_SAR_ATTR_SPECS_END_FREQ.
  *
  * @__NL80211_SAR_ATTR_LAST: Internal
  * @NL80211_SAR_ATTR_MAX: highest sar attribute
  *
  * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
  */
 enum nl80211_sar_attrs {
         __NL80211_SAR_ATTR_INVALID,
 
         NL80211_SAR_ATTR_TYPE,
         NL80211_SAR_ATTR_SPECS,
 
         __NL80211_SAR_ATTR_LAST,
         NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
 };
 
 /**
  * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
  *
  * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid
  *
  * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
  *      power limit value in units of 0.25 dBm if type is
  *      NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
  *      0 means userspace doesn't have SAR limitation on this associated range.
  *
  * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
  *      index of exported freq range table and the associated power limitation
  *      is applied to this range.
  *
  *      Userspace isn't required to set all the ranges advertised by WLAN driver,
  *      and userspace can skip some certain ranges. These skipped ranges don't
  *      have SAR limitations, and they are same as setting the
  *      %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
  *      value higher than regulatory allowed value just means SAR power
  *      limitation is removed, but it's required to set at least one range.
  *      It's not allowed to set duplicated range in one SET operation.
  *
  *      Every SET operation overwrites previous SET operation.
  *
  * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
  *      frequency of this range edge when registering SAR capability to wiphy.
  *      It's not a channel center frequency. The unit is kHz.
  *
  * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
  *      frequency of this range edge when registering SAR capability to wiphy.
  *      It's not a channel center frequency. The unit is kHz.
  *
  * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
  * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
  */
 enum nl80211_sar_specs_attrs {
         __NL80211_SAR_ATTR_SPECS_INVALID,
 
         NL80211_SAR_ATTR_SPECS_POWER,
         NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
         NL80211_SAR_ATTR_SPECS_START_FREQ,
         NL80211_SAR_ATTR_SPECS_END_FREQ,
 
         __NL80211_SAR_ATTR_SPECS_LAST,
         NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
 };
 
 /**
  * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced
  * multi-BSSID advertisements (EMA) in AP mode.
  * Kernel uses some of these attributes to advertise driver's support for
  * MBSSID and EMA.
  * Remaining attributes should be used by the userspace to configure the
  * features.
  *
  * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid
  *
  * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise
  *      the maximum number of MBSSID interfaces supported by the driver.
  *      Driver should indicate MBSSID support by setting
  *      wiphy->mbssid_max_interfaces to a value more than or equal to 2.
  *
  * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
  *      to advertise the maximum profile periodicity supported by the driver
  *      if EMA is enabled. Driver should indicate EMA support to the userspace
  *      by setting wiphy->ema_max_profile_periodicity to
  *      a non-zero value.
  *
  * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
  *      this BSS (u8) in the multiple BSSID set.
  *      Value must be set to 0 for the transmitting interface and non-zero for
  *      all non-transmitting interfaces. The userspace will be responsible
  *      for using unique indices for the interfaces.
  *      Range: 0 to wiphy->mbssid_max_interfaces-1.
  *
  * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for
  *      a non-transmitted profile which provides the interface index (u32) of
  *      the transmitted profile. The value must match one of the interface
  *      indices advertised by the kernel. Optional if the interface being set up
  *      is the transmitting one, however, if provided then the value must match
  *      the interface index of the same.
  *
  * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
  *      Setting this flag is permitted only if the driver advertises EMA support
  *      by setting wiphy->ema_max_profile_periodicity to non-zero.
  *
  * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
  * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
  */
 enum nl80211_mbssid_config_attributes {
         __NL80211_MBSSID_CONFIG_ATTR_INVALID,
 
         NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES,
         NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY,
         NL80211_MBSSID_CONFIG_ATTR_INDEX,
         NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX,
         NL80211_MBSSID_CONFIG_ATTR_EMA,
 
         /* keep last */
         __NL80211_MBSSID_CONFIG_ATTR_LAST,
         NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,
 };
 
 /**
  * enum nl80211_ap_settings_flags - AP settings flags
  *
  * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external
  *      authentication.
  * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query
  *      procedures offload to driver. If driver advertises
  *      %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall
  *      ignore SA Query procedures and validations when this flag is set by
  *      userspace.
  */
 enum nl80211_ap_settings_flags {
         NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT       = 1 << 0,
         NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT    = 1 << 1,
 };
 
 /**
  * enum nl80211_wiphy_radio_attrs - wiphy radio attributes
  *
  * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid
  *
  * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)
  * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this
  *      radio. Attribute may be present multiple times.
  * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface
  *      combination for this radio. Attribute may be present multiple times
  *      and contains attributes defined in &enum nl80211_if_combination_attrs.
  *
  * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal
  * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute
  */
 enum nl80211_wiphy_radio_attrs {
         __NL80211_WIPHY_RADIO_ATTR_INVALID,
 
         NL80211_WIPHY_RADIO_ATTR_INDEX,
         NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,
         NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,
 
         /* keep last */
         __NL80211_WIPHY_RADIO_ATTR_LAST,
         NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,
 };
 
 /**
  * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range
  *
  * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid
  *
  * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).
  *      The unit is kHz.
  * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).
  *      The unit is kHz.
  *
  * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal
  * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute
  */
 enum nl80211_wiphy_radio_freq_range {
         __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,
 
         NL80211_WIPHY_RADIO_FREQ_ATTR_START,
         NL80211_WIPHY_RADIO_FREQ_ATTR_END,
 
         __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,
         NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,
 };
 
 #endif /* __LINUX_NL80211_H */