1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright 2022 Arm Ltd,
4 * based on work:
5 * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
6 */
7
8 /dts-v1/;
9 #include "suniv-f1c100s.dtsi"
10
11 #include <dt-bindings/gpio/gpio.h>
12
13 / {
14 model = "Lctech Pi F1C200s";
15 compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
16 "allwinner,suniv-f1c100s";
17
18 aliases {
19 serial0 = &uart1;
20 };
21
22 chosen {
23 stdout-path = "serial0:115200n8";
24 };
25
26 reg_vcc3v3: regulator-3v3 {
27 compatible = "regulator-fixed";
28 regulator-name = "vcc3v3";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
31 };
32 };
33
34 &mmc0 {
35 broken-cd;
36 bus-width = <4>;
37 disable-wp;
38 vmmc-supply = <®_vcc3v3>;
39 status = "okay";
40 };
41
42 &otg_sram {
43 status = "okay";
44 };
45
46 &spi0 {
47 pinctrl-names = "default";
48 pinctrl-0 = <&spi0_pc_pins>;
49 status = "okay";
50
51 flash@0 {
52 compatible = "spi-nand";
53 reg = <0>;
54 spi-max-frequency = <40000000>;
55 };
56 };
57
58 &uart1 {
59 pinctrl-names = "default";
60 pinctrl-0 = <&uart1_pa_pins>;
61 status = "okay";
62 };
63
64 /*
65 * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
66 * to Vin, which supplies the board. Host mode works (if the board is powered
67 * otherwise), but peripheral is probably the intention.
68 */
69 &usb_otg {
70 dr_mode = "peripheral";
71 status = "okay";
72 };
73
74 &usbphy {
75 status = "okay";
76 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.