1 // SPDX-License-Identifier: GPL-2.0+
2 // Copyright (c) 2021 Facebook Inc.
3 /dts-v1/;
4
5 #include "aspeed-g6.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h>
7 #include <dt-bindings/usb/pd.h>
8 #include <dt-bindings/leds/leds-pca955x.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/i2c/i2c.h>
11
12 / {
13 model = "Facebook Catalina BMC";
14 compatible = "facebook,catalina-bmc", "aspeed,ast2600";
15
16 aliases {
17 serial0 = &uart1;
18 serial2 = &uart3;
19 serial3 = &uart4;
20 serial4 = &uart5;
21 i2c16 = &i2c1mux0ch0;
22 i2c17 = &i2c1mux0ch1;
23 i2c18 = &i2c1mux0ch2;
24 i2c19 = &i2c1mux0ch3;
25 i2c20 = &i2c1mux0ch4;
26 i2c21 = &i2c1mux0ch5;
27 i2c22 = &i2c1mux0ch6;
28 i2c23 = &i2c1mux0ch7;
29 i2c24 = &i2c0mux0ch0;
30 i2c25 = &i2c0mux0ch1;
31 i2c26 = &i2c0mux0ch2;
32 i2c27 = &i2c0mux0ch3;
33 i2c28 = &i2c0mux1ch0;
34 i2c29 = &i2c0mux1ch1;
35 i2c30 = &i2c0mux1ch2;
36 i2c31 = &i2c0mux1ch3;
37 i2c32 = &i2c0mux2ch0;
38 i2c33 = &i2c0mux2ch1;
39 i2c34 = &i2c0mux2ch2;
40 i2c35 = &i2c0mux2ch3;
41 i2c36 = &i2c0mux3ch0;
42 i2c37 = &i2c0mux3ch1;
43 i2c38 = &i2c0mux3ch2;
44 i2c39 = &i2c0mux3ch3;
45 i2c40 = &i2c0mux4ch0;
46 i2c41 = &i2c0mux4ch1;
47 i2c42 = &i2c0mux4ch2;
48 i2c43 = &i2c0mux4ch3;
49 i2c44 = &i2c0mux5ch0;
50 i2c45 = &i2c0mux5ch1;
51 i2c46 = &i2c0mux5ch2;
52 i2c47 = &i2c0mux5ch3;
53 i2c48 = &i2c30mux0ch0;
54 i2c49 = &i2c30mux0ch1;
55 i2c50 = &i2c30mux0ch2;
56 i2c51 = &i2c30mux0ch3;
57 i2c52 = &i2c30mux0ch4;
58 i2c53 = &i2c30mux0ch5;
59 i2c54 = &i2c30mux0ch6;
60 i2c55 = &i2c30mux0ch7;
61 };
62
63 chosen {
64 stdout-path = "serial4:57600n8";
65 };
66
67 memory@80000000 {
68 device_type = "memory";
69 reg = <0x80000000 0x80000000>;
70 };
71
72 iio-hwmon {
73 compatible = "iio-hwmon";
74 io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
75 <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
76 <&adc1 2>;
77 };
78
79 spi1_gpio: spi {
80 compatible = "spi-gpio";
81 #address-cells = <1>;
82 #size-cells = <0>;
83
84 sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
85 mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
86 miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
87 cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
88 num-chipselects = <1>;
89
90 tpm@0 {
91 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
92 spi-max-frequency = <33000000>;
93 reg = <0>;
94 };
95 };
96
97 leds {
98 compatible = "gpio-leds";
99
100 led-0 {
101 label = "bmc_heartbeat_amber";
102 gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
103 linux,default-trigger = "heartbeat";
104 };
105
106 led-1 {
107 label = "fp_id_amber";
108 default-state = "off";
109 gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
110 };
111
112 led-2 {
113 label = "bmc_ready_noled";
114 gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
115 };
116
117 led-3 {
118 label = "bmc_ready_cpld_noled";
119 gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
120 };
121 };
122
123 p1v8_bmc_aux: regulator-p1v8-bmc-aux {
124 compatible = "regulator-fixed";
125 regulator-name = "p1v8_bmc_aux";
126 regulator-min-microvolt = <1800000>;
127 regulator-max-microvolt = <1800000>;
128 regulator-always-on;
129 };
130
131 p2v5_bmc_aux: regulator-p2v5-bmc-aux {
132 compatible = "regulator-fixed";
133 regulator-name = "p2v5_bmc_aux";
134 regulator-min-microvolt = <2500000>;
135 regulator-max-microvolt = <2500000>;
136 regulator-always-on;
137 };
138 };
139
140 &uart1 {
141 status = "okay";
142 };
143
144 &uart3 {
145 status = "okay";
146 };
147
148 &uart4 {
149 status = "okay";
150 };
151
152 &uart5 {
153 status = "okay";
154 };
155
156 &mac3 {
157 status = "okay";
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_ncsi4_default>;
160 use-ncsi;
161 };
162
163 &fmc {
164 status = "okay";
165 flash@0 {
166 status = "okay";
167 m25p,fast-read;
168 label = "bmc";
169 spi-max-frequency = <50000000>;
170 #include "openbmc-flash-layout-128.dtsi"
171 };
172 flash@1 {
173 status = "okay";
174 m25p,fast-read;
175 label = "alt-bmc";
176 spi-max-frequency = <50000000>;
177 };
178 };
179
180 &i2c0 {
181 status = "okay";
182
183 i2c-mux@71 {
184 compatible = "nxp,pca9546";
185 reg = <0x71>;
186 #address-cells = <1>;
187 #size-cells = <0>;
188
189 i2c0mux0ch0: i2c@0 {
190 #address-cells = <1>;
191 #size-cells = <0>;
192 reg = <0>;
193 };
194 i2c0mux0ch1: i2c@1 {
195 #address-cells = <1>;
196 #size-cells = <0>;
197 reg = <1>;
198 };
199 i2c0mux0ch2: i2c@2 {
200 #address-cells = <1>;
201 #size-cells = <0>;
202 reg = <2>;
203 };
204 i2c0mux0ch3: i2c@3 {
205 #address-cells = <1>;
206 #size-cells = <0>;
207 reg = <3>;
208 };
209 };
210
211 i2c-mux@72 {
212 compatible = "nxp,pca9546";
213 reg = <0x72>;
214 #address-cells = <1>;
215 #size-cells = <0>;
216
217 i2c0mux1ch0: i2c@0 {
218 #address-cells = <1>;
219 #size-cells = <0>;
220 reg = <0>;
221 };
222 i2c0mux1ch1: i2c@1 {
223 #address-cells = <1>;
224 #size-cells = <0>;
225 reg = <1>;
226
227 // IO Mezz 0 IOEXP
228 io_expander7: gpio@20 {
229 compatible = "nxp,pca9535";
230 reg = <0x20>;
231 gpio-controller;
232 #gpio-cells = <2>;
233 };
234
235 // IO Mezz 0 FRU EEPROM
236 eeprom@50 {
237 compatible = "atmel,24c64";
238 reg = <0x50>;
239 };
240 };
241 i2c0mux1ch2: i2c@2 {
242 #address-cells = <1>;
243 #size-cells = <0>;
244 reg = <2>;
245 i2c-mux@70 {
246 compatible = "nxp,pca9548";
247 reg = <0x70>;
248 #address-cells = <1>;
249 #size-cells = <0>;
250
251 i2c30mux0ch0: i2c@0 {
252 #address-cells = <1>;
253 #size-cells = <0>;
254 reg = <0>;
255 };
256 i2c30mux0ch1: i2c@1 {
257 #address-cells = <1>;
258 #size-cells = <0>;
259 reg = <1>;
260 };
261 i2c30mux0ch2: i2c@2 {
262 #address-cells = <1>;
263 #size-cells = <0>;
264 reg = <2>;
265 };
266 i2c30mux0ch3: i2c@3 {
267 #address-cells = <1>;
268 #size-cells = <0>;
269 reg = <3>;
270 };
271 i2c30mux0ch4: i2c@4 {
272 #address-cells = <1>;
273 #size-cells = <0>;
274 reg = <4>;
275 };
276 i2c30mux0ch5: i2c@5 {
277 #address-cells = <1>;
278 #size-cells = <0>;
279 reg = <5>;
280 };
281 i2c30mux0ch6: i2c@6 {
282 #address-cells = <1>;
283 #size-cells = <0>;
284 reg = <6>;
285 // HDD FRU EEPROM
286 eeprom@52 {
287 compatible = "atmel,24c64";
288 reg = <0x52>;
289 };
290 };
291 i2c30mux0ch7: i2c@7 {
292 #address-cells = <1>;
293 #size-cells = <0>;
294 reg = <7>;
295
296 power-sensor@40 {
297 compatible = "ti,ina230";
298 reg = <0x40>;
299 shunt-resistor = <2000>;
300 };
301 power-sensor@41 {
302 compatible = "ti,ina230";
303 reg = <0x41>;
304 shunt-resistor = <2000>;
305 };
306 power-sensor@44 {
307 compatible = "ti,ina230";
308 reg = <0x44>;
309 shunt-resistor = <2000>;
310 };
311 power-sensor@45 {
312 compatible = "ti,ina230";
313 reg = <0x45>;
314 shunt-resistor = <2000>;
315 };
316 };
317 };
318 };
319 i2c0mux1ch3: i2c@3 {
320 #address-cells = <1>;
321 #size-cells = <0>;
322 reg = <3>;
323 };
324 };
325
326 i2c-mux@73 {
327 compatible = "nxp,pca9546";
328 reg = <0x73>;
329 #address-cells = <1>;
330 #size-cells = <0>;
331
332 i2c0mux2ch0: i2c@0 {
333 #address-cells = <1>;
334 #size-cells = <0>;
335 reg = <0>;
336 };
337 i2c0mux2ch1: i2c@1 {
338 #address-cells = <1>;
339 #size-cells = <0>;
340 reg = <1>;
341 };
342 i2c0mux2ch2: i2c@2 {
343 #address-cells = <1>;
344 #size-cells = <0>;
345 reg = <2>;
346 };
347 i2c0mux2ch3: i2c@3 {
348 #address-cells = <1>;
349 #size-cells = <0>;
350 reg = <3>;
351 };
352 };
353
354 i2c-mux@75 {
355 compatible = "nxp,pca9546";
356 reg = <0x75>;
357 #address-cells = <1>;
358 #size-cells = <0>;
359
360 i2c0mux3ch0: i2c@0 {
361 #address-cells = <1>;
362 #size-cells = <0>;
363 reg = <0>;
364 };
365 i2c0mux3ch1: i2c@1 {
366 #address-cells = <1>;
367 #size-cells = <0>;
368 reg = <1>;
369 };
370 i2c0mux3ch2: i2c@2 {
371 #address-cells = <1>;
372 #size-cells = <0>;
373 reg = <2>;
374 };
375 i2c0mux3ch3: i2c@3 {
376 #address-cells = <1>;
377 #size-cells = <0>;
378 reg = <3>;
379 };
380 };
381
382 i2c-mux@76 {
383 compatible = "nxp,pca9546";
384 reg = <0x76>;
385 #address-cells = <1>;
386 #size-cells = <0>;
387
388 i2c0mux4ch0: i2c@0 {
389 #address-cells = <1>;
390 #size-cells = <0>;
391 reg = <0>;
392 };
393 i2c0mux4ch1: i2c@1 {
394 #address-cells = <1>;
395 #size-cells = <0>;
396 reg = <1>;
397
398 // IO Mezz 1 IOEXP
399 io_expander8: gpio@21 {
400 compatible = "nxp,pca9535";
401 reg = <0x21>;
402 gpio-controller;
403 #gpio-cells = <2>;
404 };
405
406 // IO Mezz 1 FRU EEPROM
407 eeprom@50 {
408 compatible = "atmel,24c64";
409 reg = <0x50>;
410 };
411 };
412 i2c0mux4ch2: i2c@2 {
413 #address-cells = <1>;
414 #size-cells = <0>;
415 reg = <2>;
416 };
417 i2c0mux4ch3: i2c@3 {
418 #address-cells = <1>;
419 #size-cells = <0>;
420 reg = <3>;
421 };
422 };
423
424 i2c-mux@77 {
425 compatible = "nxp,pca9546";
426 reg = <0x77>;
427 #address-cells = <1>;
428 #size-cells = <0>;
429
430 i2c0mux5ch0: i2c@0 {
431 #address-cells = <1>;
432 #size-cells = <0>;
433 reg = <0>;
434 };
435 i2c0mux5ch1: i2c@1 {
436 #address-cells = <1>;
437 #size-cells = <0>;
438 reg = <1>;
439 };
440 i2c0mux5ch2: i2c@2 {
441 #address-cells = <1>;
442 #size-cells = <0>;
443 reg = <2>;
444 };
445 i2c0mux5ch3: i2c@3 {
446 #address-cells = <1>;
447 #size-cells = <0>;
448 reg = <3>;
449 };
450 };
451 };
452
453 &i2c1 {
454 status = "okay";
455 i2c-mux@70 {
456 compatible = "nxp,pca9548";
457 #address-cells = <1>;
458 #size-cells = <0>;
459 reg = <0x70>;
460 i2c-mux-idle-disconnect;
461
462 i2c1mux0ch0: i2c@0 {
463 #address-cells = <1>;
464 #size-cells = <0>;
465 reg = <0x0>;
466
467 power-sensor@41 {
468 compatible = "ti,ina238";
469 reg = <0x41>;
470 shunt-resistor = <500>;
471 };
472 power-sensor@42 {
473 compatible = "ti,ina238";
474 reg = <0x42>;
475 shunt-resistor = <500>;
476 };
477 power-sensor@44 {
478 compatible = "ti,ina238";
479 reg = <0x44>;
480 shunt-resistor = <500>;
481 };
482 };
483 i2c1mux0ch1: i2c@1 {
484 #address-cells = <1>;
485 #size-cells = <0>;
486 reg = <0x1>;
487
488 power-sensor@41 {
489 compatible = "ti,ina238";
490 reg = <0x41>;
491 };
492 power-sensor@43 {
493 compatible = "ti,ina238";
494 reg = <0x43>;
495 };
496 };
497 i2c1mux0ch2: i2c@2 {
498 #address-cells = <1>;
499 #size-cells = <0>;
500 reg = <0x2>;
501 };
502 i2c1mux0ch3: i2c@3 {
503 #address-cells = <1>;
504 #size-cells = <0>;
505 reg = <0x3>;
506 };
507 i2c1mux0ch4: i2c@4 {
508 #address-cells = <1>;
509 #size-cells = <0>;
510 reg = <0x4>;
511
512 power-monitor@42 {
513 compatible = "lltc,ltc4287";
514 reg = <0x42>;
515 shunt-resistor-micro-ohms = <200>;
516 };
517 power-monitor@43 {
518 compatible = "lltc,ltc4287";
519 reg = <0x43>;
520 shunt-resistor-micro-ohms = <200>;
521 };
522 };
523 i2c1mux0ch5: i2c@5 {
524 #address-cells = <1>;
525 #size-cells = <0>;
526 reg = <0x5>;
527
528 // PDB FRU EEPROM
529 eeprom@54 {
530 compatible = "atmel,24c64";
531 reg = <0x54>;
532 };
533
534 // PDB TEMP SENSOR
535 temperature-sensor@4f {
536 compatible = "ti,tmp75";
537 reg = <0x4f>;
538 };
539 };
540 i2c1mux0ch6: i2c@6 {
541 #address-cells = <1>;
542 #size-cells = <0>;
543 reg = <0x6>;
544
545 // PDB IOEXP
546 io_expander5: gpio@27 {
547 compatible = "nxp,pca9554";
548 reg = <0x27>;
549 gpio-controller;
550 #gpio-cells = <2>;
551 };
552
553 // OSFP IOEXP
554 io_expander6: gpio@25 {
555 compatible = "nxp,pca9555";
556 reg = <0x25>;
557 gpio-controller;
558 #gpio-cells = <2>;
559 };
560
561 // OSFP FRU EEPROM
562 eeprom@51 {
563 compatible = "atmel,24c64";
564 reg = <0x51>;
565 };
566 };
567 i2c1mux0ch7: i2c@7 {
568 #address-cells = <1>;
569 #size-cells = <0>;
570 reg = <0x7>;
571
572 // FIO FRU EEPROM
573 eeprom@53 {
574 compatible = "atmel,24c64";
575 reg = <0x53>;
576 };
577
578 // FIO TEMP SENSOR
579 temperature-sensor@4b {
580 compatible = "ti,tmp75";
581 reg = <0x4b>;
582 };
583 };
584 };
585 };
586
587 &i2c2 {
588 status = "okay";
589
590 // Module 0 IOEXP
591 io_expander0: gpio@20 {
592 compatible = "nxp,pca9555";
593 reg = <0x20>;
594 gpio-controller;
595 #gpio-cells = <2>;
596 interrupt-parent = <&gpio0>;
597 interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
598 };
599
600 // Module 1 IOEXP
601 io_expander1: gpio@21 {
602 compatible = "nxp,pca9555";
603 reg = <0x21>;
604 gpio-controller;
605 #gpio-cells = <2>;
606 interrupt-parent = <&gpio0>;
607 interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
608 };
609
610 // HMC IOEXP
611 io_expander2: gpio@27 {
612 compatible = "nxp,pca9555";
613 reg = <0x27>;
614 gpio-controller;
615 #gpio-cells = <2>;
616 interrupt-parent = <&gpio0>;
617 interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
618 };
619
620 // Module 0 EEPROM
621 eeprom@50 {
622 compatible = "atmel,24c64";
623 reg = <0x50>;
624 };
625
626 // Module 1 EEPROM
627 eeprom@51 {
628 compatible = "atmel,24c64";
629 reg = <0x51>;
630 };
631 };
632
633 &i2c3 {
634 status = "okay";
635 };
636
637 &i2c4 {
638 status = "okay";
639 };
640
641 &i2c5 {
642 status = "okay";
643 };
644
645 &i2c6 {
646 status = "okay";
647
648 // BMC IOEXP on Module 0
649 io_expander3: gpio@21 {
650 compatible = "nxp,pca9555";
651 reg = <0x21>;
652 gpio-controller;
653 #gpio-cells = <2>;
654 };
655
656 rtc@6f {
657 compatible = "nuvoton,nct3018y";
658 reg = <0x6f>;
659 };
660 };
661
662 &i2c7 {
663 status = "okay";
664 };
665
666 &i2c8 {
667 status = "okay";
668 };
669
670 &i2c9 {
671 status = "okay";
672
673 // SCM CPLD IOEXP
674 io_expander4: gpio@4f {
675 compatible = "nxp,pca9555";
676 reg = <0x4f>;
677 gpio-controller;
678 #gpio-cells = <2>;
679 };
680
681 // SCM TEMP SENSOR
682 temperature-sensor@4b {
683 compatible = "ti,tmp75";
684 reg = <0x4b>;
685 };
686
687 // SCM FRU EEPROM
688 eeprom@50 {
689 compatible = "atmel,24c64";
690 reg = <0x50>;
691 };
692
693 // BSM FRU EEPROM
694 eeprom@56 {
695 compatible = "atmel,24c64";
696 reg = <0x56>;
697 };
698 };
699
700 &i2c10 {
701 status = "okay";
702
703 // OCP NIC0 TEMP
704 temperature-sensor@1f {
705 compatible = "ti,tmp421";
706 reg = <0x1f>;
707 };
708
709 // OCP NIC0 FRU EEPROM
710 eeprom@50 {
711 compatible = "atmel,24c64";
712 reg = <0x50>;
713 };
714 };
715
716 &i2c11 {
717 status = "okay";
718
719 ssif-bmc@10 {
720 compatible = "ssif-bmc";
721 reg = <0x10>;
722 };
723 };
724
725 &i2c12 {
726 status = "okay";
727
728 // Module 1 FRU EEPROM
729 eeprom@50 {
730 compatible = "atmel,24c64";
731 reg = <0x50>;
732 };
733 };
734
735 &i2c13 {
736 status = "okay";
737
738 // Module 0 FRU EEPROM
739 eeprom@50 {
740 compatible = "atmel,24c64";
741 reg = <0x50>;
742 };
743
744 // Left CBC FRU EEPROM
745 eeprom@54 {
746 compatible = "atmel,24c02";
747 reg = <0x54>;
748 };
749
750 // Right CBC FRU EEPROM
751 eeprom@55 {
752 compatible = "atmel,24c02";
753 reg = <0x55>;
754 };
755
756 // HMC FRU EEPROM
757 eeprom@57 {
758 compatible = "atmel,24c02";
759 reg = <0x57>;
760 };
761 };
762
763 &i2c14 {
764 status = "okay";
765
766 // PDB CPLD IOEXP 0x10
767 io_expander9: gpio@10 {
768 compatible = "nxp,pca9555";
769 interrupt-parent = <&gpio0>;
770 interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
771 reg = <0x10>;
772 gpio-controller;
773 #gpio-cells = <2>;
774 };
775
776 // PDB CPLD IOEXP 0x11
777 io_expander10: gpio@11 {
778 compatible = "nxp,pca9555";
779 interrupt-parent = <&gpio0>;
780 interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
781 reg = <0x11>;
782 gpio-controller;
783 #gpio-cells = <2>;
784 };
785
786 // PDB CPLD IOEXP 0x12
787 io_expander11: gpio@12 {
788 compatible = "nxp,pca9555";
789 interrupt-parent = <&gpio0>;
790 interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
791 reg = <0x12>;
792 gpio-controller;
793 #gpio-cells = <2>;
794 };
795
796 // PDB CPLD IOEXP 0x13
797 io_expander12: gpio@13 {
798 compatible = "nxp,pca9555";
799 interrupt-parent = <&gpio0>;
800 interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
801 reg = <0x13>;
802 gpio-controller;
803 #gpio-cells = <2>;
804 };
805
806 // PDB CPLD IOEXP 0x14
807 io_expander13: gpio@14 {
808 compatible = "nxp,pca9555";
809 interrupt-parent = <&gpio0>;
810 interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
811 reg = <0x14>;
812 gpio-controller;
813 #gpio-cells = <2>;
814 };
815
816 // PDB CPLD IOEXP 0x15
817 io_expander14: gpio@15 {
818 compatible = "nxp,pca9555";
819 interrupt-parent = <&gpio0>;
820 interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
821 reg = <0x15>;
822 gpio-controller;
823 #gpio-cells = <2>;
824 };
825 };
826
827 &i2c15 {
828 status = "okay";
829
830 // OCP NIC1 TEMP
831 temperature-sensor@1f {
832 compatible = "ti,tmp421";
833 reg = <0x1f>;
834 };
835
836 // OCP NIC1 FRU EEPROM
837 eeprom@50 {
838 compatible = "atmel,24c64";
839 reg = <0x50>;
840 };
841 };
842
843 &adc0 {
844 vref-supply = <&p1v8_bmc_aux>;
845 status = "okay";
846
847 pinctrl-names = "default";
848 pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
849 &pinctrl_adc2_default &pinctrl_adc3_default
850 &pinctrl_adc4_default &pinctrl_adc5_default
851 &pinctrl_adc6_default &pinctrl_adc7_default>;
852 };
853
854 &adc1 {
855 vref-supply = <&p2v5_bmc_aux>;
856 status = "okay";
857
858 pinctrl-names = "default";
859 pinctrl-0 = <&pinctrl_adc10_default>;
860 };
861
862 &ehci0 {
863 status = "okay";
864 };
865
866 &wdt1 {
867 status = "okay";
868 pinctrl-names = "default";
869 pinctrl-0 = <&pinctrl_wdtrst1_default>;
870 aspeed,reset-type = "soc";
871 aspeed,external-signal;
872 aspeed,ext-push-pull;
873 aspeed,ext-active-high;
874 aspeed,ext-pulse-duration = <256>;
875 };
876
877 &pinctrl {
878 pinctrl_ncsi3_default: ncsi3_default {
879 function = "RMII3";
880 groups = "NCSI3";
881 };
882
883 pinctrl_ncsi4_default: ncsi4_default {
884 function = "RMII4";
885 groups = "NCSI4";
886 };
887 };
888
889 &gpio0 {
890 gpio-line-names =
891 /*A0-A7*/ "","","","","","","","",
892 /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
893 "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
894 "IOEXP_INT_L","FM_ID_LED",
895 "","",
896 /*C0-C7*/ "","","","",
897 "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
898 "","BMC_I2C_SSIF_ALERT_L",
899 /*D0-D7*/ "","","","","","","","",
900 /*E0-E7*/ "","","","","","","","",
901 /*F0-F7*/ "","","","","","","","",
902 /*G0-G7*/ "","","","","","",
903 "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
904 /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
905 "SHDN_FORCE_L","SHDN_REQ_L",
906 "","","","",
907 /*I0-I7*/ "","","","",
908 "","FLASH_WP_STATUS",
909 "FM_PDB_HEALTH_N","RUN_POWER_PG",
910 /*J0-J7*/ "","","","","","","","",
911 /*K0-K7*/ "","","","","","","","",
912 /*L0-L7*/ "","","","","","","","",
913 /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
914 "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
915 "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
916 /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
917 "LED_POSTCODE_2","LED_POSTCODE_3",
918 "LED_POSTCODE_4","LED_POSTCODE_5",
919 "LED_POSTCODE_6","LED_POSTCODE_7",
920 /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
921 "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
922 "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
923 "","USBDBG_IPMI_EN_L",
924 /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
925 "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
926 "host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
927 /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
928 "UART_MUX_SEL","I2C_MUX_RESET_L",
929 "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
930 "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
931 /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
932 "CPU_BOOT_DONE","PMBUS_GNT_L",
933 "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
934 "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
935 /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
936 "FM_BMC_DEBUG_SW_N","UID_LED_N",
937 "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
938 /*T0-T7*/ "","","","","","","","",
939 /*U0-U7*/ "","","","","","","","",
940 /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
941 "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
942 "SMB_BMC_TMP_ALERT","PWR_LED_N",
943 "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
944 /*W0-W7*/ "","","","","","","","",
945 /*X0-X7*/ "","","","","","","","",
946 /*Y0-Y7*/ "","RST_BMC_SELF_HW",
947 "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
948 "","","","",
949 /*Z0-Z7*/ "","","","","","","","";
950 };
951
952 &io_expander0 {
953 gpio-line-names =
954 "FPGA_THERM_OVERT_L","FPGA_READY_BMC",
955 "HMC_BMC_DETECT","HMC_PGOOD",
956 "","BMC_SELF_PWR_CYCLE",
957 "FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
958 "EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
959 "BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
960 "NCSI_CS1_SEL","SGPIO_EN_L",
961 "B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
962 };
963
964 &io_expander1 {
965 gpio-line-names =
966 "SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
967 "","",
968 "","",
969 "SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
970 "SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
971 "SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
972 "","",
973 "","SEC_I2C_BUS_MUX_RESET_L";
974 };
975
976 &io_expander2 {
977 gpio-line-names =
978 "HMC_PRSNT_L","HMC_READY",
979 "HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
980 "HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
981 "HMC_EROT_RST_L","GLOBAL_WP_HMC",
982 "FPGA_RST_L","USB2_HUB_RST",
983 "CPU_UART_MUX_SEL","",
984 "","","","";
985 };
986
987 &io_expander3 {
988 gpio-line-names =
989 "RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
990 "SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
991 "BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
992 "","","","";
993 };
994
995 &io_expander4 {
996 gpio-line-names =
997 "stby_power_en_cpld","stby_power_gd_cpld","","",
998 "","","","",
999 "","","","",
1000 "","","","";
1001 };
1002
1003 &io_expander5 {
1004 gpio-line-names =
1005 "JTAG_MUX_SEL","IOX_BMC_RESET","","",
1006 "","","","";
1007 };
1008
1009 &io_expander6 {
1010 gpio-line-names =
1011 "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
1012 "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
1013 "","","","",
1014 "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
1015 "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
1016 "PWRGD_P3V3_N2","","","";
1017 };
1018
1019 &io_expander7 {
1020 gpio-line-names =
1021 "RST_CX7_0","RST_CX7_1",
1022 "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
1023 "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
1024 "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
1025 "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
1026 "FNP_L_CX0","FNP_L_CX1",
1027 "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
1028 };
1029
1030 &io_expander8 {
1031 gpio-line-names =
1032 "SEC_RST_CX7_0","SEC_RST_CX7_1",
1033 "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
1034 "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
1035 "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
1036 "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
1037 "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
1038 "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
1039 };
1040
1041 &io_expander9 {
1042 gpio-line-names =
1043 "LEAK3_DETECT_R","LEAK1_DETECT_R",
1044 "LEAK2_DETECT_R","LEAK0_DETECT_R",
1045 "CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
1046 "CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
1047 "P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
1048 "P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
1049 "RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
1050 "","";
1051 };
1052
1053 &io_expander10 {
1054 gpio-line-names =
1055 "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
1056 "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
1057 "P12V_AUX_NIC1_SENSE_ALERT_R_N",
1058 "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
1059 "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
1060 "P12V_AUX_NIC0_SENSE_ALERT_R_N",
1061 "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
1062 "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
1063 "P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
1064 "P48V_HS1_FAULT_N_PLD","";
1065 };
1066
1067 &io_expander11 {
1068 gpio-line-names =
1069 "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
1070 "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
1071 "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
1072 "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
1073 "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
1074 "PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
1075 "PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
1076 "PRSNT_OSFP_POWER_CABLE_N","";
1077 };
1078
1079 &io_expander12 {
1080 gpio-line-names =
1081 "RST_OCP_V3_1_R_N","NIC0_PERST_N",
1082 "OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
1083 "FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
1084 "HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
1085 "RST_OCP_V3_2_R_N","NIC1_PERST_N",
1086 "OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
1087 "FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
1088 "HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
1089 };
1090
1091 &io_expander13 {
1092 gpio-line-names =
1093 "NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
1094 "PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
1095 "PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
1096 "FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
1097 "PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
1098 "P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
1099 "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
1100 "","";
1101 };
1102
1103 &io_expander14 {
1104 gpio-line-names =
1105 "","","","","","","","",
1106 "FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
1107 "FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
1108 "FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
1109 "FAB_BMC_REV_ID0","";
1110 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.