~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm/broadcom/bcm-cygnus.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 /*
  2  *  BSD LICENSE
  3  *
  4  *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
  5  *
  6  *  Redistribution and use in source and binary forms, with or without
  7  *  modification, are permitted provided that the following conditions
  8  *  are met:
  9  *
 10  *    * Redistributions of source code must retain the above copyright
 11  *      notice, this list of conditions and the following disclaimer.
 12  *    * Redistributions in binary form must reproduce the above copyright
 13  *      notice, this list of conditions and the following disclaimer in
 14  *      the documentation and/or other materials provided with the
 15  *      distribution.
 16  *    * Neither the name of Broadcom Corporation nor the names of its
 17  *      contributors may be used to endorse or promote products derived
 18  *      from this software without specific prior written permission.
 19  *
 20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 30  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 31  */
 32 
 33 #include <dt-bindings/interrupt-controller/arm-gic.h>
 34 #include <dt-bindings/interrupt-controller/irq.h>
 35 #include <dt-bindings/clock/bcm-cygnus.h>
 36 
 37 / {
 38         #address-cells = <1>;
 39         #size-cells = <1>;
 40         compatible = "brcm,cygnus";
 41         model = "Broadcom Cygnus SoC";
 42         interrupt-parent = <&gic>;
 43 
 44         aliases {
 45                 ethernet0 = &eth0;
 46         };
 47 
 48         memory@0 {
 49                 device_type = "memory";
 50                 reg = <0 0>;
 51         };
 52 
 53         cpus {
 54                 #address-cells = <1>;
 55                 #size-cells = <0>;
 56 
 57                 cpu@0 {
 58                         device_type = "cpu";
 59                         compatible = "arm,cortex-a9";
 60                         next-level-cache = <&L2>;
 61                         reg = <0x0>;
 62                 };
 63         };
 64 
 65         /include/ "bcm-cygnus-clock.dtsi"
 66 
 67         pmu {
 68                 compatible = "arm,cortex-a9-pmu";
 69                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 70         };
 71 
 72         core@19000000 {
 73                 compatible = "simple-bus";
 74                 ranges = <0x00000000 0x19000000 0x1000000>;
 75                 #address-cells = <1>;
 76                 #size-cells = <1>;
 77 
 78                 timer@20200 {
 79                         compatible = "arm,cortex-a9-global-timer";
 80                         reg = <0x20200 0x100>;
 81                         interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 82                         clocks = <&periph_clk>;
 83                 };
 84 
 85                 gic: interrupt-controller@21000 {
 86                         compatible = "arm,cortex-a9-gic";
 87                         #interrupt-cells = <3>;
 88                         #address-cells = <0>;
 89                         interrupt-controller;
 90                         reg = <0x21000 0x1000>,
 91                               <0x20100 0x100>;
 92                 };
 93 
 94                 L2: cache-controller@22000 {
 95                         compatible = "arm,pl310-cache";
 96                         reg = <0x22000 0x1000>;
 97                         cache-unified;
 98                         cache-level = <2>;
 99                 };
100         };
101 
102         axi {
103                 compatible = "simple-bus";
104                 ranges;
105                 #address-cells = <1>;
106                 #size-cells = <1>;
107 
108                 otp: otp@301c800 {
109                         compatible = "brcm,ocotp";
110                         reg = <0x0301c800 0x2c>;
111                         brcm,ocotp-size = <2048>;
112                         status = "disabled";
113                 };
114 
115                 pcie_phy: pcie_phy@301d0a0 {
116                         compatible = "brcm,cygnus-pcie-phy";
117                         reg = <0x0301d0a0 0x14>;
118                         #address-cells = <1>;
119                         #size-cells = <0>;
120 
121                         pcie0_phy: pcie-phy@0 {
122                                 reg = <0>;
123                                 #phy-cells = <0>;
124                         };
125 
126                         pcie1_phy: pcie-phy@1 {
127                                 reg = <1>;
128                                 #phy-cells = <0>;
129                         };
130                 };
131 
132                 pinctrl: pinctrl@301d0c8 {
133                         compatible = "brcm,cygnus-pinmux";
134                         reg = <0x0301d0c8 0x30>,
135                               <0x0301d24c 0x2c>;
136 
137                         spi_0: spi_0 {
138                                 function = "spi0";
139                                 groups = "spi0_grp";
140                         };
141 
142                         spi_1: spi_1 {
143                                 function = "spi1";
144                                 groups = "spi1_grp";
145                         };
146 
147                         spi_2: spi_2 {
148                                 function = "spi2";
149                                 groups = "spi2_grp";
150                         };
151                 };
152 
153                 mailbox: mailbox@3024024 {
154                         compatible = "brcm,iproc-mailbox";
155                         reg = <0x03024024 0x40>;
156                         interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
157                         #interrupt-cells = <1>;
158                         interrupt-controller;
159                         #mbox-cells = <1>;
160                 };
161 
162                 gpio_crmu: gpio@3024800 {
163                         compatible = "brcm,cygnus-crmu-gpio";
164                         reg = <0x03024800 0x50>,
165                               <0x03024008 0x18>;
166                         ngpios = <6>;
167                         #gpio-cells = <2>;
168                         gpio-controller;
169                         interrupt-controller;
170                         #interrupt-cells = <2>;
171                         interrupt-parent = <&mailbox>;
172                         interrupts = <0>;
173                 };
174 
175                 mdio: mdio@18002000 {
176                         compatible = "brcm,iproc-mdio";
177                         reg = <0x18002000 0x8>;
178                         #size-cells = <0>;
179                         #address-cells = <1>;
180                         status = "disabled";
181 
182                         gphy0: ethernet-phy@0 {
183                                 reg = <0>;
184                         };
185 
186                         gphy1: ethernet-phy@1 {
187                                 reg = <1>;
188                         };
189                 };
190 
191                 switch: switch@18007000 {
192                         compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
193                         reg = <0x18007000 0x1000>;
194                         status = "disabled";
195 
196                         ports {
197                                 #address-cells = <1>;
198                                 #size-cells = <0>;
199 
200                                 port@0 {
201                                         reg = <0>;
202                                         phy-handle = <&gphy0>;
203                                         phy-mode = "rgmii";
204                                 };
205 
206                                 port@1 {
207                                         reg = <1>;
208                                         phy-handle = <&gphy1>;
209                                         phy-mode = "rgmii";
210                                 };
211 
212                                 port@8 {
213                                         reg = <8>;
214                                         label = "cpu";
215                                         ethernet = <&eth0>;
216                                         fixed-link {
217                                                 speed = <1000>;
218                                                 full-duplex;
219                                         };
220                                 };
221                         };
222                 };
223 
224                 i2c0: i2c@18008000 {
225                         compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
226                         reg = <0x18008000 0x100>;
227                         #address-cells = <1>;
228                         #size-cells = <0>;
229                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
230                         clock-frequency = <100000>;
231                         status = "disabled";
232                 };
233 
234                 wdt0: wdt@18009000 {
235                         compatible = "arm,sp805" , "arm,primecell";
236                         reg = <0x18009000 0x1000>;
237                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
238                         clocks = <&axi81_clk>, <&axi81_clk>;
239                         clock-names = "wdog_clk", "apb_pclk";
240                 };
241 
242                 gpio_ccm: gpio@1800a000 {
243                         compatible = "brcm,cygnus-ccm-gpio";
244                         reg = <0x1800a000 0x50>,
245                               <0x0301d164 0x20>;
246                         ngpios = <24>;
247                         #gpio-cells = <2>;
248                         gpio-controller;
249                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
250                         interrupt-controller;
251                         #interrupt-cells = <2>;
252                 };
253 
254                 i2c1: i2c@1800b000 {
255                         compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
256                         reg = <0x1800b000 0x100>;
257                         #address-cells = <1>;
258                         #size-cells = <0>;
259                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
260                         clock-frequency = <100000>;
261                         status = "disabled";
262                 };
263 
264                 pcie0: pcie@18012000 {
265                         compatible = "brcm,iproc-pcie";
266                         reg = <0x18012000 0x1000>;
267 
268                         #interrupt-cells = <1>;
269                         interrupt-map-mask = <0 0 0 0>;
270                         interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
271 
272                         linux,pci-domain = <0>;
273 
274                         bus-range = <0x00 0xff>;
275 
276                         #address-cells = <3>;
277                         #size-cells = <2>;
278                         device_type = "pci";
279                         ranges = <0x81000000 0 0          0x28000000 0 0x00010000>,
280                                  <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
281 
282                         phys = <&pcie0_phy>;
283                         phy-names = "pcie-phy";
284 
285                         status = "disabled";
286 
287                         msi-parent = <&msi0>;
288                         msi0: msi {
289                                 compatible = "brcm,iproc-msi";
290                                 msi-controller;
291                                 interrupt-parent = <&gic>;
292                                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
293                                              <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
294                                              <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
295                                              <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
296                         };
297                 };
298 
299                 pcie1: pcie@18013000 {
300                         compatible = "brcm,iproc-pcie";
301                         reg = <0x18013000 0x1000>;
302 
303                         #interrupt-cells = <1>;
304                         interrupt-map-mask = <0 0 0 0>;
305                         interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
306 
307                         linux,pci-domain = <1>;
308 
309                         bus-range = <0x00 0xff>;
310 
311                         #address-cells = <3>;
312                         #size-cells = <2>;
313                         device_type = "pci";
314                         ranges = <0x81000000 0 0          0x48000000 0 0x00010000>,
315                                  <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
316 
317                         phys = <&pcie1_phy>;
318                         phy-names = "pcie-phy";
319 
320                         status = "disabled";
321 
322                         msi-parent = <&msi1>;
323                         msi1: msi {
324                                 compatible = "brcm,iproc-msi";
325                                 msi-controller;
326                                 interrupt-parent = <&gic>;
327                                 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
328                                              <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
329                                              <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
330                                              <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
331                         };
332                 };
333 
334                 dma0: dma@18018000 {
335                         compatible = "arm,pl330", "arm,primecell";
336                         reg = <0x18018000 0x1000>;
337                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
338                                      <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
339                                      <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
340                                      <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
341                                      <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
342                                      <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
343                                      <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
344                                      <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
345                                      <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
346                         clocks = <&apb_clk>;
347                         clock-names = "apb_pclk";
348                         #dma-cells = <1>;
349                 };
350 
351                 uart0: serial@18020000 {
352                         compatible = "snps,dw-apb-uart";
353                         reg = <0x18020000 0x100>;
354                         reg-shift = <2>;
355                         reg-io-width = <4>;
356                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
357                         clocks = <&axi81_clk>;
358                         clock-frequency = <100000000>;
359                         status = "disabled";
360                 };
361 
362                 uart1: serial@18021000 {
363                         compatible = "snps,dw-apb-uart";
364                         reg = <0x18021000 0x100>;
365                         reg-shift = <2>;
366                         reg-io-width = <4>;
367                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
368                         clocks = <&axi81_clk>;
369                         clock-frequency = <100000000>;
370                         status = "disabled";
371                 };
372 
373                 uart2: serial@18022000 {
374                         compatible = "snps,dw-apb-uart";
375                         reg = <0x18022000 0x100>;
376                         reg-shift = <2>;
377                         reg-io-width = <4>;
378                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
379                         clocks = <&axi81_clk>;
380                         clock-frequency = <100000000>;
381                         status = "disabled";
382                 };
383 
384                 uart3: serial@18023000 {
385                         compatible = "snps,dw-apb-uart";
386                         reg = <0x18023000 0x100>;
387                         reg-shift = <2>;
388                         reg-io-width = <4>;
389                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
390                         clocks = <&axi81_clk>;
391                         clock-frequency = <100000000>;
392                         status = "disabled";
393                 };
394 
395                 spi0: spi@18028000 {
396                         compatible = "arm,pl022", "arm,primecell";
397                         reg = <0x18028000 0x1000>;
398                         #address-cells = <1>;
399                         #size-cells = <0>;
400                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
401                         pinctrl-0 = <&spi_0>;
402                         clocks = <&axi81_clk>, <&axi81_clk>;
403                         clock-names = "sspclk", "apb_pclk";
404                         status = "disabled";
405                 };
406 
407                 spi1: spi@18029000 {
408                         compatible = "arm,pl022", "arm,primecell";
409                         reg = <0x18029000 0x1000>;
410                         #address-cells = <1>;
411                         #size-cells = <0>;
412                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
413                         pinctrl-0 = <&spi_1>;
414                         clocks = <&axi81_clk>, <&axi81_clk>;
415                         clock-names = "sspclk", "apb_pclk";
416                         status = "disabled";
417                 };
418 
419                 spi2: spi@1802a000 {
420                         compatible = "arm,pl022", "arm,primecell";
421                         reg = <0x1802a000 0x1000>;
422                         #address-cells = <1>;
423                         #size-cells = <0>;
424                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
425                         pinctrl-0 = <&spi_2>;
426                         clocks = <&axi81_clk>, <&axi81_clk>;
427                         clock-names = "sspclk", "apb_pclk";
428                         status = "disabled";
429                 };
430 
431                 rng: rng@18032000 {
432                         compatible = "brcm,iproc-rng200";
433                         reg = <0x18032000 0x28>;
434                 };
435 
436                 sdhci0: sdhci@18041000 {
437                         compatible = "brcm,sdhci-iproc-cygnus";
438                         reg = <0x18041000 0x100>;
439                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
440                         clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
441                         bus-width = <4>;
442                         sdhci,auto-cmd12;
443                         status = "disabled";
444                 };
445 
446                 eth0: ethernet@18042000 {
447                         compatible = "brcm,amac";
448                         reg = <0x18042000 0x1000>,
449                               <0x18110000 0x1000>;
450                         reg-names = "amac_base", "idm_base";
451                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
452                         status = "disabled";
453                 };
454 
455                 sdhci1: sdhci@18043000 {
456                         compatible = "brcm,sdhci-iproc-cygnus";
457                         reg = <0x18043000 0x100>;
458                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
459                         clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
460                         bus-width = <4>;
461                         sdhci,auto-cmd12;
462                         status = "disabled";
463                 };
464 
465                 nand_controller: nand-controller@18046000 {
466                         compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
467                         reg = <0x18046000 0x600>, <0xf8105408 0x600>,
468                               <0x18046f00 0x20>;
469                         reg-names = "nand", "iproc-idm", "iproc-ext";
470                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
471 
472                         #address-cells = <1>;
473                         #size-cells = <0>;
474 
475                         brcm,nand-has-wp;
476                 };
477 
478                 ehci0: usb@18048000 {
479                         compatible = "generic-ehci";
480                         reg = <0x18048000 0x100>;
481                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
482                         status = "disabled";
483                 };
484 
485                 ohci0: usb@18048800 {
486                         compatible = "generic-ohci";
487                         reg = <0x18048800 0x100>;
488                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
489                         status = "disabled";
490                 };
491 
492                 clcd: clcd@180a0000 {
493                         compatible = "arm,pl111", "arm,primecell";
494                         reg = <0x180a0000 0x1000>;
495                         interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
496                         interrupt-names = "combined";
497                         clocks = <&axi41_clk>, <&apb_clk>;
498                         clock-names = "clcdclk", "apb_pclk";
499                         status = "disabled";
500                 };
501 
502                 v3d: v3d@180a2000 {
503                         compatible = "brcm,cygnus-v3d";
504                         reg = <0x180a2000 0x1000>;
505                         clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
506                         clock-names = "v3d_clk";
507                         interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
508                         status = "disabled";
509                 };
510 
511                 vc4: gpu {
512                         compatible = "brcm,cygnus-vc4";
513                 };
514 
515                 gpio_asiu: gpio@180a5000 {
516                         compatible = "brcm,cygnus-asiu-gpio";
517                         reg = <0x180a5000 0x668>;
518                         ngpios = <146>;
519                         #gpio-cells = <2>;
520                         gpio-controller;
521 
522                         interrupt-controller;
523                         #interrupt-cells = <2>;
524                         interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
525                         gpio-ranges = <&pinctrl 0 42 1>,
526                                         <&pinctrl 1 44 3>,
527                                         <&pinctrl 4 48 1>,
528                                         <&pinctrl 5 50 3>,
529                                         <&pinctrl 8 126 1>,
530                                         <&pinctrl 9 155 1>,
531                                         <&pinctrl 10 152 1>,
532                                         <&pinctrl 11 154 1>,
533                                         <&pinctrl 12 153 1>,
534                                         <&pinctrl 13 127 3>,
535                                         <&pinctrl 16 140 1>,
536                                         <&pinctrl 17 145 7>,
537                                         <&pinctrl 24 130 10>,
538                                         <&pinctrl 34 141 4>,
539                                         <&pinctrl 38 54 1>,
540                                         <&pinctrl 39 56 3>,
541                                         <&pinctrl 42 60 3>,
542                                         <&pinctrl 45 64 3>,
543                                         <&pinctrl 48 68 2>,
544                                         <&pinctrl 50 84 6>,
545                                         <&pinctrl 56 94 6>,
546                                         <&pinctrl 62 72 1>,
547                                         <&pinctrl 63 70 1>,
548                                         <&pinctrl 64 80 1>,
549                                         <&pinctrl 65 74 3>,
550                                         <&pinctrl 68 78 1>,
551                                         <&pinctrl 69 82 1>,
552                                         <&pinctrl 70 156 17>,
553                                         <&pinctrl 87 104 12>,
554                                         <&pinctrl 99 102 2>,
555                                         <&pinctrl 101 90 4>,
556                                         <&pinctrl 105 116 6>,
557                                         <&pinctrl 111 100 2>,
558                                         <&pinctrl 113 122 4>,
559                                         <&pinctrl 123 11 1>,
560                                         <&pinctrl 124 38 4>,
561                                         <&pinctrl 128 43 1>,
562                                         <&pinctrl 129 47 1>,
563                                         <&pinctrl 130 49 1>,
564                                         <&pinctrl 131 53 1>,
565                                         <&pinctrl 132 55 1>,
566                                         <&pinctrl 133 59 1>,
567                                         <&pinctrl 134 63 1>,
568                                         <&pinctrl 135 67 1>,
569                                         <&pinctrl 136 71 1>,
570                                         <&pinctrl 137 73 1>,
571                                         <&pinctrl 138 77 1>,
572                                         <&pinctrl 139 79 1>,
573                                         <&pinctrl 140 81 1>,
574                                         <&pinctrl 141 83 1>,
575                                         <&pinctrl 142 10 1>;
576                 };
577 
578                 ts_adc_syscon: ts_adc_syscon@180a6000 {
579                         compatible = "brcm,iproc-ts-adc-syscon", "syscon";
580                         reg = <0x180a6000 0xc30>;
581                 };
582 
583                 touchscreen: touchscreen@180a6000 {
584                         compatible = "brcm,iproc-touchscreen";
585                         #address-cells = <1>;
586                         #size-cells = <1>;
587                         ts_syscon = <&ts_adc_syscon>;
588                         clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
589                         clock-names = "tsc_clk";
590                         interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
591                         status = "disabled";
592                 };
593 
594                 adc: adc@180a6000 {
595                         compatible = "brcm,iproc-static-adc";
596                         #io-channel-cells = <1>;
597                         adc-syscon = <&ts_adc_syscon>;
598                         clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
599                         clock-names = "tsc_clk";
600                         interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
601                         status = "disabled";
602                 };
603 
604                 pwm: pwm@180aa500 {
605                         compatible = "brcm,kona-pwm";
606                         reg = <0x180aa500 0xc4>;
607                         #pwm-cells = <3>;
608                         clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
609                         status = "disabled";
610                 };
611 
612                 keypad: keypad@180ac000 {
613                         compatible = "brcm,bcm-keypad";
614                         reg = <0x180ac000 0x14c>;
615                         interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
616                         clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
617                         clock-names = "peri_clk";
618                         clock-frequency = <31250>;
619                         pull-up-enabled;
620                         col-debounce-filter-period = <0>;
621                         status-debounce-filter-period = <0>;
622                         row-output-enabled;
623                         status = "disabled";
624                 };
625         };
626 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php