1 /*
2 * Copyright 2012-2017 <LW@KARO-electronics.de>
3 * based on imx53-qsb.dts
4 * Copyright 2011 Freescale Semiconductor, Inc.
5 * Copyright 2011 Linaro Ltd.
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 *
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * version 2 as published by the Free Software Foundation.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45 #include "imx53.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
47
48 / {
49 model = "Ka-Ro electronics TX53 module";
50 compatible = "karo,tx53", "fsl,imx53";
51
52 /* Will be filled by the bootloader */
53 memory@70000000 {
54 device_type = "memory";
55 reg = <0x70000000 0>;
56 };
57
58 aliases {
59 can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
60 can1 = &can1;
61 ipu = &ipu;
62 reg-can-xcvr = ®_can_xcvr;
63 usbh1 = &usbh1;
64 usbotg = &usbotg;
65 };
66
67 clocks {
68 ckih1 {
69 clock-frequency = <0>;
70 };
71 };
72
73 mclk: clock-mclk {
74 compatible = "fixed-clock";
75 #clock-cells = <0>;
76 clock-frequency = <26000000>;
77 };
78
79 gpio-keys {
80 compatible = "gpio-keys";
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_gpio_key>;
83
84 key-power {
85 label = "Power Button";
86 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
87 linux,code = <116>; /* KEY_POWER */
88 wakeup-source;
89 };
90 };
91
92 leds {
93 compatible = "gpio-leds";
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_stk5led>;
96
97 led-user {
98 label = "Heartbeat";
99 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
100 linux,default-trigger = "heartbeat";
101 };
102 };
103
104 reg_2v5: regulator-2v5 {
105 compatible = "regulator-fixed";
106 regulator-name = "2V5";
107 regulator-min-microvolt = <2500000>;
108 regulator-max-microvolt = <2500000>;
109 };
110
111 reg_3v3: regulator-3v3 {
112 compatible = "regulator-fixed";
113 regulator-name = "3V3";
114 regulator-min-microvolt = <3300000>;
115 regulator-max-microvolt = <3300000>;
116 };
117
118 reg_can_xcvr: regulator-can-xcvr {
119 compatible = "regulator-fixed";
120 regulator-name = "CAN XCVR";
121 regulator-min-microvolt = <3300000>;
122 regulator-max-microvolt = <3300000>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_can_xcvr>;
125 gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
126 };
127
128 reg_usbh1_vbus: regulator-usbh1-vbus {
129 compatible = "regulator-fixed";
130 regulator-name = "usbh1_vbus";
131 regulator-min-microvolt = <5000000>;
132 regulator-max-microvolt = <5000000>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_usbh1_vbus>;
135 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
136 enable-active-high;
137 };
138
139 reg_usbotg_vbus: regulator-usbotg-vbus {
140 compatible = "regulator-fixed";
141 regulator-name = "usbotg_vbus";
142 regulator-min-microvolt = <5000000>;
143 regulator-max-microvolt = <5000000>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_usbotg_vbus>;
146 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
147 enable-active-high;
148 };
149
150 sound {
151 compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
152 model = "tx53-audio-sgtl5000";
153 ssi-controller = <&ssi1>;
154 audio-codec = <&sgtl5000>;
155 audio-routing =
156 "MIC_IN", "Mic Jack",
157 "Mic Jack", "Mic Bias",
158 "Headphone Jack", "HP_OUT";
159 /* '1' based port numbers according to datasheet names */
160 mux-int-port = <1>;
161 mux-ext-port = <5>;
162 };
163 };
164
165 &audmux {
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_ssi1>;
168 status = "okay";
169 };
170
171 &can1 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_can1>;
174 xceiver-supply = <®_can_xcvr>;
175 status = "okay";
176 };
177
178 &can2 {
179 pinctrl-names = "default";
180 pinctrl-0 = <&pinctrl_can2>;
181 xceiver-supply = <®_can_xcvr>;
182 status = "okay";
183 };
184
185 &ecspi1 {
186 pinctrl-names = "default";
187 pinctrl-0 = <&pinctrl_ecspi1>;
188 status = "okay";
189
190 cs-gpios = <
191 &gpio2 30 GPIO_ACTIVE_HIGH
192 &gpio3 19 GPIO_ACTIVE_HIGH
193 >;
194
195 };
196
197 &esdhc1 {
198 cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
199 fsl,wp-controller;
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_esdhc1>;
202 status = "okay";
203 };
204
205 &esdhc2 {
206 cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
207 fsl,wp-controller;
208 pinctrl-names = "default";
209 pinctrl-0 = <&pinctrl_esdhc2>;
210 status = "okay";
211 };
212
213 &fec {
214 pinctrl-names = "default";
215 pinctrl-0 = <&pinctrl_fec>;
216 phy-mode = "rmii";
217 phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
218 phy-handle = <&phy0>;
219 mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
220 status = "okay";
221
222 mdio {
223 #address-cells = <1>;
224 #size-cells = <0>;
225
226 phy0: ethernet-phy@0 {
227 reg = <0>;
228 interrupt-parent = <&gpio2>;
229 interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
230 device_type = "ethernet-phy";
231 };
232 };
233 };
234
235 &i2c1 {
236 pinctrl-names = "default", "gpio";
237 pinctrl-0 = <&pinctrl_i2c1>;
238 pinctrl-0 = <&pinctrl_i2c1_gpio>;
239 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
240 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
241 clock-frequency = <400000>;
242 status = "okay";
243
244 rtc1: rtc@68 {
245 compatible = "dallas,ds1339";
246 reg = <0x68>;
247 pinctrl-names = "default";
248 pinctrl-0 = <&pinctrl_ds1339>;
249 interrupt-parent = <&gpio4>;
250 interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
251 trickle-resistor-ohms = <250>;
252 trickle-diode-disable;
253 };
254 };
255
256 &iomuxc {
257 pinctrl-names = "default";
258 pinctrl-0 = <&pinctrl_hog>;
259
260 imx53-tx53 {
261 pinctrl_hog: hoggrp {
262 /* pins not in use by any device on the Starterkit board series */
263 fsl,pins = <
264 /* CMOS Sensor Interface */
265 MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
266 MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
267 MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
268 MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
269 MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
270 MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
271 MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
272 MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
273 MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
274 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
275 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
276 MX53_PAD_GPIO_0__GPIO1_0 0x1f4
277 /* Module Specific Signal */
278 /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
279 /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
280 MX53_PAD_EIM_D29__GPIO3_29 0x1f4
281 MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
282 /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
283 /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
284 MX53_PAD_EIM_A19__GPIO2_19 0x1f4
285 MX53_PAD_EIM_A20__GPIO2_18 0x1f4
286 MX53_PAD_EIM_A21__GPIO2_17 0x1f4
287 MX53_PAD_EIM_A22__GPIO2_16 0x1f4
288 MX53_PAD_EIM_A23__GPIO6_6 0x1f4
289 MX53_PAD_EIM_A24__GPIO5_4 0x1f4
290 MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
291 MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
292 MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
293 MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
294 /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
295 /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
296 MX53_PAD_GPIO_13__GPIO4_3 0x1f4
297 MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
298 MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
299 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
300 MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
301 MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
302 MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
303 MX53_PAD_EIM_OE__GPIO2_25 0x1f4
304 MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
305 MX53_PAD_EIM_RW__GPIO2_26 0x1f4
306 MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
307 MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
308 MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
309 MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
310 MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
311 MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
312 MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
313 MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
314 >;
315 };
316
317 pinctrl_can1: can1grp {
318 fsl,pins = <
319 MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
320 MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
321 >;
322 };
323
324 pinctrl_can2: can2grp {
325 fsl,pins = <
326 MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
327 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
328 >;
329 };
330
331 pinctrl_can_xcvr: can-xcvrgrp {
332 fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
333 };
334
335 pinctrl_ds1339: ds1339grp {
336 fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
337 };
338
339 pinctrl_ecspi1: ecspi1grp {
340 fsl,pins = <
341 MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
342 MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
343 MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
344 MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
345 MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
346 MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
347 >;
348 };
349
350 pinctrl_esdhc1: esdhc1grp {
351 fsl,pins = <
352 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
353 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
354 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
355 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
356 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
357 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
358 MX53_PAD_EIM_D24__GPIO3_24 0x1f0
359 >;
360 };
361
362 pinctrl_esdhc2: esdhc2grp {
363 fsl,pins = <
364 MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
365 MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
366 MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
367 MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
368 MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
369 MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
370 MX53_PAD_EIM_D25__GPIO3_25 0x1f0
371 >;
372 };
373
374 pinctrl_fec: fecgrp {
375 fsl,pins = <
376 MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
377 MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
378 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
379 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
380 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
381 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
382 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
383 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
384 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
385 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
386 >;
387 };
388
389 pinctrl_gpio_key: gpio-keygrp {
390 fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
391 };
392
393 pinctrl_i2c1: i2c1grp {
394 fsl,pins = <
395 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
396 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
397 >;
398 };
399
400 pinctrl_i2c1_gpio: i2c1-gpiogrp {
401 fsl,pins = <
402 MX53_PAD_EIM_D21__GPIO3_21 0x400001e6
403 MX53_PAD_EIM_D28__GPIO3_28 0x400001e6
404 >;
405 };
406
407 pinctrl_i2c3: i2c3grp {
408 fsl,pins = <
409 MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4
410 MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4
411 >;
412 };
413
414 pinctrl_i2c3_gpio: i2c3-gpiogrp {
415 fsl,pins = <
416 MX53_PAD_GPIO_3__GPIO1_3 0x400001e6
417 MX53_PAD_GPIO_6__GPIO1_6 0x400001e6
418 >;
419 };
420
421 pinctrl_nand: nandgrp {
422 fsl,pins = <
423 MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
424 MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
425 MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
426 MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
427 MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
428 MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
429 MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
430 MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4
431 MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4
432 MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4
433 MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4
434 MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4
435 MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4
436 MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4
437 MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4
438 >;
439 };
440
441 pinctrl_pwm2: pwm2grp {
442 fsl,pins = <
443 MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
444 >;
445 };
446
447 pinctrl_ssi1: ssi1grp {
448 fsl,pins = <
449 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
450 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
451 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
452 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
453 >;
454 };
455
456 pinctrl_ssi2: ssi2grp {
457 fsl,pins = <
458 MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
459 MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
460 MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
461 MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
462 MX53_PAD_EIM_D27__GPIO3_27 0x1f0
463 >;
464 };
465
466 pinctrl_stk5led: stk5ledgrp {
467 fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
468 };
469
470 pinctrl_uart1: uart1grp {
471 fsl,pins = <
472 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
473 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
474 MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
475 MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
476 >;
477 };
478
479 pinctrl_uart2: uart2grp {
480 fsl,pins = <
481 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
482 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
483 MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
484 MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
485 >;
486 };
487
488 pinctrl_uart3: uart3grp {
489 fsl,pins = <
490 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
491 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
492 MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
493 MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
494 >;
495 };
496
497 pinctrl_usbh1: usbh1grp {
498 fsl,pins = <
499 MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
500 >;
501 };
502
503 pinctrl_usbh1_vbus: usbh1-vbusgrp {
504 fsl,pins = <
505 MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
506 >;
507 };
508
509 pinctrl_usbotg_vbus: usbotg-vbusgrp {
510 fsl,pins = <
511 MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
512 MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
513 >;
514 };
515 };
516 };
517
518 &ipu {
519 status = "okay";
520 };
521
522 &nfc {
523 pinctrl-names = "default";
524 pinctrl-0 = <&pinctrl_nand>;
525 nand-bus-width = <8>;
526 nand-ecc-mode = "hw";
527 nand-on-flash-bbt;
528 status = "okay";
529 };
530
531 &pwm2 {
532 pinctrl-names = "default";
533 pinctrl-0 = <&pinctrl_pwm2>;
534 };
535
536 &sdma {
537 fsl,sdma-ram-script-name = "sdma-imx53.bin";
538 };
539
540 &ssi1 {
541 status = "okay";
542 };
543
544 &ssi2 {
545 status = "disabled";
546 };
547
548 &uart1 {
549 pinctrl-names = "default";
550 pinctrl-0 = <&pinctrl_uart1>;
551 uart-has-rtscts;
552 status = "okay";
553 };
554
555 &uart2 {
556 pinctrl-names = "default";
557 pinctrl-0 = <&pinctrl_uart2>;
558 uart-has-rtscts;
559 status = "okay";
560 };
561
562 &uart3 {
563 pinctrl-names = "default";
564 pinctrl-0 = <&pinctrl_uart3>;
565 uart-has-rtscts;
566 status = "okay";
567 };
568
569 &usbh1 {
570 pinctrl-names = "default";
571 pinctrl-0 = <&pinctrl_usbh1>;
572 phy_type = "utmi";
573 disable-over-current;
574 vbus-supply = <®_usbh1_vbus>;
575 status = "okay";
576 };
577
578 &usbotg {
579 phy_type = "utmi";
580 dr_mode = "peripheral";
581 disable-over-current;
582 vbus-supply = <®_usbotg_vbus>;
583 status = "okay";
584 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.