1 /*
2 * Support for imx6 based Advantech DMS-BA16 Qseven module
3 *
4 * Copyright 2015 Timesys Corporation.
5 * Copyright 2015 General Electric Company
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 *
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * version 2 as published by the Free Software Foundation.
15 *
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
30 * conditions:
31 *
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
34 *
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45 #include "imx6q.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
47
48 / {
49 memory@10000000 {
50 device_type = "memory";
51 reg = <0x10000000 0x40000000>;
52 };
53
54 backlight_lvds: backlight {
55 compatible = "pwm-backlight";
56 pinctrl-names = "default";
57 pinctrl-0 = <&pinctrl_display>;
58 pwms = <&pwm1 0 5000000 0>;
59 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
60 10 11 12 13 14 15 16 17 18 19
61 20 21 22 23 24 25 26 27 28 29
62 30 31 32 33 34 35 36 37 38 39
63 40 41 42 43 44 45 46 47 48 49
64 50 51 52 53 54 55 56 57 58 59
65 60 61 62 63 64 65 66 67 68 69
66 70 71 72 73 74 75 76 77 78 79
67 80 81 82 83 84 85 86 87 88 89
68 90 91 92 93 94 95 96 97 98 99
69 100 101 102 103 104 105 106 107 108 109
70 110 111 112 113 114 115 116 117 118 119
71 120 121 122 123 124 125 126 127 128 129
72 130 131 132 133 134 135 136 137 138 139
73 140 141 142 143 144 145 146 147 148 149
74 150 151 152 153 154 155 156 157 158 159
75 160 161 162 163 164 165 166 167 168 169
76 170 171 172 173 174 175 176 177 178 179
77 180 181 182 183 184 185 186 187 188 189
78 190 191 192 193 194 195 196 197 198 199
79 200 201 202 203 204 205 206 207 208 209
80 210 211 212 213 214 215 216 217 218 219
81 220 221 222 223 224 225 226 227 228 229
82 230 231 232 233 234 235 236 237 238 239
83 240 241 242 243 244 245 246 247 248 249
84 250 251 252 253 254 255>;
85 default-brightness-level = <255>;
86 enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
87 };
88
89 reg_1p8v: regulator-1p8v {
90 compatible = "regulator-fixed";
91 regulator-name = "1P8V";
92 regulator-min-microvolt = <1800000>;
93 regulator-max-microvolt = <1800000>;
94 regulator-always-on;
95 };
96
97 reg_3p3v: regulator-3p3v {
98 compatible = "regulator-fixed";
99 regulator-name = "3P3V";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
102 regulator-always-on;
103 };
104
105 reg_lvds: regulator-lvds {
106 compatible = "regulator-fixed";
107 regulator-name = "lvds_ppen";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 regulator-boot-on;
111 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
112 enable-active-high;
113 };
114
115 reg_usb_h1_vbus: regulator-usbh1vbus {
116 compatible = "regulator-fixed";
117 regulator-name = "usb_h1_vbus";
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 };
121
122 reg_usb_otg_vbus: regulator-usbotgvbus {
123 compatible = "regulator-fixed";
124 regulator-name = "usb_otg_vbus";
125 regulator-min-microvolt = <5000000>;
126 regulator-max-microvolt = <5000000>;
127 pinctrl-0 = <&pinctrl_usbotg_vbus>;
128 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
129 enable-active-high;
130 };
131 };
132
133 &audmux {
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_audmux>;
136 status = "okay";
137 };
138
139 &ecspi1 {
140 cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_ecspi1>;
143 status = "okay";
144
145 flash: flash@0 {
146 compatible = "jedec,spi-nor";
147 #address-cells = <1>;
148 #size-cells = <1>;
149 spi-max-frequency = <20000000>;
150 reg = <0>;
151
152 partition@0 {
153 label = "U-Boot";
154 reg = <0x0 0xc0000>;
155 };
156
157 partition@c0000 {
158 label = "env";
159 reg = <0xc0000 0x10000>;
160 };
161
162 partition@d0000 {
163 label = "spare";
164 reg = <0xd0000 0x320000>;
165 };
166
167 partition@3f0000 {
168 label = "mfg";
169 reg = <0x3f0000 0x10000>;
170 };
171 };
172 };
173
174 &fec {
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_enet>;
177 phy-mode = "rgmii-id";
178 phy-supply = <®_3p3v>;
179 phy-handle = <&phy0>;
180 status = "okay";
181
182 mdio {
183 #address-cells = <1>;
184 #size-cells = <0>;
185
186 phy0: ethernet-phy@4 {
187 reg = <4>;
188 qca,clk-out-frequency = <125000000>;
189 };
190 };
191 };
192
193 &hdmi {
194 ddc-i2c-bus = <&i2c2>;
195 status = "okay";
196 };
197
198 &i2c1 {
199 clock-frequency = <100000>;
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_i2c1>;
202 status = "okay";
203 };
204
205 &i2c2 {
206 clock-frequency = <100000>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_i2c2>;
209 status = "okay";
210 };
211
212 &i2c3 {
213 clock-frequency = <100000>;
214 pinctrl-names = "default";
215 pinctrl-0 = <&pinctrl_i2c3>;
216 status = "okay";
217
218 pmic@58 {
219 compatible = "dlg,da9063";
220 reg = <0x58>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_pmic>;
223 interrupt-parent = <&gpio7>;
224 interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
225
226 onkey {
227 compatible = "dlg,da9063-onkey";
228 };
229
230 regulators {
231 vdd_bcore1: bcore1 {
232 regulator-min-microvolt = <1420000>;
233 regulator-max-microvolt = <1420000>;
234 regulator-always-on;
235 regulator-boot-on;
236 };
237
238 vdd_bcore2: bcore2 {
239 regulator-min-microvolt = <1420000>;
240 regulator-max-microvolt = <1420000>;
241 regulator-always-on;
242 regulator-boot-on;
243 };
244
245 vdd_bpro: bpro {
246 regulator-min-microvolt = <1500000>;
247 regulator-max-microvolt = <1500000>;
248 regulator-always-on;
249 regulator-boot-on;
250 };
251
252 vdd_bmem: bmem {
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 regulator-always-on;
256 regulator-boot-on;
257 };
258
259 vdd_bio: bio {
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-always-on;
263 regulator-boot-on;
264 };
265
266 vdd_bperi: bperi {
267 regulator-min-microvolt = <3300000>;
268 regulator-max-microvolt = <3300000>;
269 regulator-always-on;
270 regulator-boot-on;
271 };
272
273 vdd_ldo1: ldo1 {
274 regulator-min-microvolt = <600000>;
275 regulator-max-microvolt = <1860000>;
276 };
277
278 vdd_ldo2: ldo2 {
279 regulator-min-microvolt = <600000>;
280 regulator-max-microvolt = <1860000>;
281 };
282
283 vdd_ldo3: ldo3 {
284 regulator-min-microvolt = <900000>;
285 regulator-max-microvolt = <3440000>;
286 };
287
288 vdd_ldo4: ldo4 {
289 regulator-min-microvolt = <900000>;
290 regulator-max-microvolt = <3440000>;
291 };
292
293 vdd_ldo5: ldo5 {
294 regulator-min-microvolt = <900000>;
295 regulator-max-microvolt = <3600000>;
296 };
297
298 vdd_ldo6: ldo6 {
299 regulator-min-microvolt = <900000>;
300 regulator-max-microvolt = <3600000>;
301 };
302
303 vdd_ldo7: ldo7 {
304 regulator-min-microvolt = <900000>;
305 regulator-max-microvolt = <3600000>;
306 };
307
308 vdd_ldo8: ldo8 {
309 regulator-min-microvolt = <900000>;
310 regulator-max-microvolt = <3600000>;
311 };
312
313 vdd_ldo9: ldo9 {
314 regulator-min-microvolt = <950000>;
315 regulator-max-microvolt = <3600000>;
316 };
317
318 vdd_ldo10: ldo10 {
319 regulator-min-microvolt = <900000>;
320 regulator-max-microvolt = <3600000>;
321 };
322
323 vdd_ldo11: ldo11 {
324 regulator-min-microvolt = <900000>;
325 regulator-max-microvolt = <3600000>;
326 regulator-always-on;
327 regulator-boot-on;
328 };
329 };
330 };
331
332 rtc@32 {
333 compatible = "epson,rx8010";
334 pinctrl-names = "default";
335 pinctrl-0 = <&pinctrl_rtc>;
336 reg = <0x32>;
337 interrupt-parent = <&gpio4>;
338 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
339 };
340 };
341
342 &pcie {
343 pinctrl-names = "default";
344 pinctrl-0 = <&pinctrl_pcie>;
345 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
346 fsl,tx-swing-full = <103>;
347 fsl,tx-swing-low = <103>;
348 status = "okay";
349 };
350
351 &pwm1 {
352 pinctrl-names = "default";
353 pinctrl-0 = <&pinctrl_pwm1>;
354 status = "okay";
355 };
356
357 &pwm2 {
358 pinctrl-names = "default";
359 pinctrl-0 = <&pinctrl_pwm2>;
360 status = "disabled";
361 };
362
363 &sata {
364 status = "okay";
365 };
366
367 &ssi1 {
368 status = "okay";
369 };
370
371 &uart3 {
372 pinctrl-names = "default";
373 pinctrl-0 = <&pinctrl_uart3>;
374 uart-has-rtscts;
375 status = "okay";
376 };
377
378 &uart4 {
379 pinctrl-names = "default";
380 pinctrl-0 = <&pinctrl_uart4>;
381 status = "okay";
382 };
383
384 &usbh1 {
385 pinctrl-names = "default";
386 pinctrl-0 = <&pinctrl_usbhub>;
387 vbus-supply = <®_usb_h1_vbus>;
388 reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
389 status = "okay";
390 };
391
392 &usbotg {
393 vbus-supply = <®_usb_otg_vbus>;
394 pinctrl-names = "default";
395 pinctrl-0 = <&pinctrl_usbotg>;
396 disable-over-current;
397 status = "okay";
398 };
399
400 &usdhc2 {
401 pinctrl-names = "default";
402 pinctrl-0 = <&pinctrl_usdhc2>;
403 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
404 no-1-8-v;
405 keep-power-in-suspend;
406 wakeup-source;
407 status = "okay";
408 };
409
410 &usdhc3 {
411 pinctrl-names = "default";
412 pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
413 bus-width = <8>;
414 vmmc-supply = <&vdd_bperi>;
415 non-removable;
416 keep-power-in-suspend;
417 status = "okay";
418 };
419
420 &wdog1 {
421 pinctrl-names = "default";
422 pinctrl-0 = <&pinctrl_wdog>;
423 fsl,ext-reset-output;
424 };
425
426 &iomuxc {
427 pinctrl-names = "default";
428 pinctrl-0 = <&pinctrl_hog>;
429
430 pinctrl_audmux: audmuxgrp {
431 fsl,pins = <
432 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
433 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
434 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
435 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
436 >;
437 };
438
439 pinctrl_display: dispgrp {
440 fsl,pins = <
441 /* BLEN_OUT */
442 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
443 /* LVDS_PPEN_OUT */
444 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
445 >;
446 };
447
448 pinctrl_ecspi1: ecspi1grp {
449 fsl,pins = <
450 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
451 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
452 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
453 /* SPI1 CS */
454 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
455 >;
456 };
457
458 pinctrl_ecspi5: ecspi5grp {
459 fsl,pins = <
460 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0
461 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0
462 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0
463 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
464 >;
465 };
466
467 pinctrl_enet: enetgrp {
468 fsl,pins = <
469 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
470 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
471 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
472 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
473 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
474 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
475 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
476 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
477 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
478 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
479 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
480 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
481 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
482 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
483 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
484 /* FEC Reset */
485 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
486 /* AR8033 Interrupt */
487 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
488 >;
489 };
490
491 pinctrl_hog: hoggrp {
492 fsl,pins = <
493 /* GPIO 0-7 */
494 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
495 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
496 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
497 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
498 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
499 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
500 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
501 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
502 /* SUS_S3_OUT to CPLD */
503 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
504 >;
505 };
506
507 pinctrl_i2c1: i2c1grp {
508 fsl,pins = <
509 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
510 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
511 >;
512 };
513
514 pinctrl_i2c2: i2c2grp {
515 fsl,pins = <
516 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
517 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
518 >;
519 };
520
521 pinctrl_i2c3: i2c3grp {
522 fsl,pins = <
523 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
524 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
525 >;
526 };
527
528 pinctrl_pcie: pciegrp {
529 fsl,pins = <
530 /* PCIe Reset */
531 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
532 /* PCIe Wake */
533 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
534 >;
535 };
536
537 pinctrl_pmic: pmicgrp {
538 fsl,pins = <
539 /* PMIC Interrupt */
540 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
541 >;
542 };
543
544 pinctrl_pwm1: pwm1grp {
545 fsl,pins = <
546 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
547 >;
548 };
549
550 pinctrl_pwm2: pwm2grp {
551 fsl,pins = <
552 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
553 >;
554 };
555
556 pinctrl_rtc: rtcgrp {
557 fsl,pins = <
558 /* RTC_INT */
559 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
560 >;
561 };
562
563 pinctrl_uart3: uart3grp {
564 fsl,pins = <
565 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
566 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
567 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
568 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
569 >;
570 };
571
572 pinctrl_uart4: uart4grp {
573 fsl,pins = <
574 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
575 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
576 >;
577 };
578
579 pinctrl_usbhub: usbhubgrp {
580 fsl,pins = <
581 /* HUB_RESET */
582 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
583 >;
584 };
585
586 pinctrl_usbotg: usbotggrp {
587 fsl,pins = <
588 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
589 >;
590 };
591
592 pinctrl_usbotg_vbus: usbotgvbusgrp {
593 fsl,pins = <
594 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
595 >;
596 };
597
598 pinctrl_usdhc2: usdhc2grp {
599 fsl,pins = <
600 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
601 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
602 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
603 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
604 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
605 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
606 /* uSDHC2 CD */
607 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
608 >;
609 };
610
611 pinctrl_usdhc3: usdhc3grp {
612 fsl,pins = <
613 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
614 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
615 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
616 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
617 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
618 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
619 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
620 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
621 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
622 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
623 >;
624 };
625
626 pinctrl_usdhc3_reset: usdhc3grp-reset {
627 fsl,pins = <
628 MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
629 >;
630 };
631
632 pinctrl_usdhc4: usdhc4grp {
633 fsl,pins = <
634 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
635 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
636 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
637 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
638 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
639 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
640 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
641 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
642 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
643 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
644 /* uSDHC4 CD */
645 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
646 /* uSDHC4 SDIO PWR */
647 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
648 /* uSDHC4 SDIO WP */
649 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
650 /* uSDHC4 SDIO LED */
651 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
652 >;
653 };
654
655 pinctrl_wdog: wdoggrp {
656 fsl,pins = <
657 MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
658 >;
659 };
660 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.