1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3 * Copyright 2014-2022 Toradex
4 * Copyright 2012 Freescale Semiconductor, Inc.
5 * Copyright 2011 Linaro Ltd.
6 */
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pwm/pwm.h>
10
11 / {
12 model = "Toradex Apalis iMX6Q/D Module";
13 compatible = "toradex,apalis_imx6q", "fsl,imx6q";
14
15 aliases {
16 mmc0 = &usdhc3; /* eMMC */
17 mmc1 = &usdhc1; /* MMC1 slot */
18 mmc2 = &usdhc2; /* SD1 slot */
19 /delete-property/ mmc3;
20 };
21
22 /* Will be filled by the bootloader */
23 memory@10000000 {
24 device_type = "memory";
25 reg = <0x10000000 0>;
26 };
27
28 backlight: backlight {
29 compatible = "pwm-backlight";
30 brightness-levels = <0 45 63 88 119 158 203 255>;
31 default-brightness-level = <4>;
32 enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_gpio_bl_on>;
35 power-supply = <®_module_3v3>;
36 pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
37 status = "disabled";
38 };
39
40 clk_ov5640_osc: clk-ov5640-osc {
41 compatible = "fixed-clock";
42 #clock-cells = <0>;
43 clock-frequency = <24000000>;
44 };
45
46 gpio-keys {
47 compatible = "gpio-keys";
48 pinctrl-names = "default";
49 pinctrl-0 = <&pinctrl_gpio_keys>;
50
51 key-wakeup {
52 debounce-interval = <10>;
53 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
54 label = "Wake-Up";
55 linux,code = <KEY_WAKEUP>;
56 wakeup-source;
57 };
58 };
59
60 lcd_display: disp0 {
61 compatible = "fsl,imx-parallel-display";
62 #address-cells = <1>;
63 #size-cells = <0>;
64 interface-pix-fmt = "rgb24";
65 pinctrl-names = "default";
66 pinctrl-0 = <&pinctrl_ipu1_lcdif>;
67 status = "disabled";
68
69 port@0 {
70 reg = <0>;
71
72 lcd_display_in: endpoint {
73 remote-endpoint = <&ipu1_di1_disp1>;
74 };
75 };
76
77 port@1 {
78 reg = <1>;
79
80 lcd_display_out: endpoint {
81 remote-endpoint = <&lcd_panel_in>;
82 };
83 };
84 };
85
86 panel_dpi: panel-dpi {
87 compatible = "edt,et057090dhu";
88 backlight = <&backlight>;
89
90 status = "disabled";
91
92 port {
93 lcd_panel_in: endpoint {
94 remote-endpoint = <&lcd_display_out>;
95 };
96 };
97 };
98
99 panel_lvds: panel-lvds {
100 compatible = "panel-lvds";
101 backlight = <&backlight>;
102 status = "disabled";
103
104 port {
105 lvds_panel_in: endpoint {
106 remote-endpoint = <&lvds0_out>;
107 };
108 };
109 };
110
111 reg_module_3v3: regulator-module-3v3 {
112 compatible = "regulator-fixed";
113 regulator-always-on;
114 regulator-max-microvolt = <3300000>;
115 regulator-min-microvolt = <3300000>;
116 regulator-name = "+V3.3";
117 };
118
119 reg_module_3v3_audio: regulator-module-3v3-audio {
120 compatible = "regulator-fixed";
121 regulator-always-on;
122 regulator-max-microvolt = <3300000>;
123 regulator-min-microvolt = <3300000>;
124 regulator-name = "+V3.3_AUDIO";
125 };
126
127 reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
128 compatible = "regulator-fixed";
129 regulator-always-on;
130 regulator-max-microvolt = <1800000>;
131 regulator-min-microvolt = <1800000>;
132 regulator-name = "DOVDD/DVDD_1.8V";
133 /* Note: The CSI module uses on-board 3.3V_SW supply */
134 vin-supply = <®_module_3v3>;
135 };
136
137 reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
138 compatible = "regulator-fixed";
139 regulator-always-on;
140 regulator-max-microvolt = <2800000>;
141 regulator-min-microvolt = <2800000>;
142 regulator-name = "AVDD/AFVDD_2.8V";
143 /* Note: The CSI module uses on-board 3.3V_SW supply */
144 vin-supply = <®_module_3v3>;
145 };
146
147 reg_usb_otg_vbus: regulator-usb-otg-vbus {
148 compatible = "regulator-fixed";
149 enable-active-high;
150 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
153 regulator-max-microvolt = <5000000>;
154 regulator-min-microvolt = <5000000>;
155 regulator-name = "usb_otg_vbus";
156 status = "disabled";
157 };
158
159 /* on module USB hub */
160 reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
161 compatible = "regulator-fixed";
162 enable-active-high;
163 gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
166 regulator-max-microvolt = <5000000>;
167 regulator-min-microvolt = <5000000>;
168 regulator-name = "usb_host_vbus_hub";
169 startup-delay-us = <2000>;
170 status = "okay";
171 };
172
173 reg_usb_host_vbus: regulator-usb-host-vbus {
174 compatible = "regulator-fixed";
175 enable-active-high;
176 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
179 regulator-max-microvolt = <5000000>;
180 regulator-min-microvolt = <5000000>;
181 regulator-name = "usb_host_vbus";
182 vin-supply = <®_usb_host_vbus_hub>;
183 status = "disabled";
184 };
185
186 sound {
187 compatible = "fsl,imx-audio-sgtl5000";
188 audio-codec = <&codec>;
189 audio-routing =
190 "LINE_IN", "Line In Jack",
191 "MIC_IN", "Mic Jack",
192 "Mic Jack", "Mic Bias",
193 "Headphone Jack", "HP_OUT";
194 model = "imx6q-apalis-sgtl5000";
195 mux-ext-port = <4>;
196 mux-int-port = <1>;
197 ssi-controller = <&ssi1>;
198 };
199
200 spdif_out: spdif-out {
201 compatible = "linux,spdif-dit";
202 #sound-dai-cells = <0>;
203 };
204
205 spdif_in: spdif-in {
206 compatible = "linux,spdif-dir";
207 #sound-dai-cells = <0>;
208 };
209
210 sound_spdif: sound-spdif {
211 compatible = "fsl,imx-audio-spdif";
212 audio-cpu = <&spdif>;
213 audio-codec = <&spdif_out>, <&spdif_in>;
214 model = "imx-spdif";
215 status = "disabled";
216 };
217 };
218
219 &audmux {
220 pinctrl-names = "default";
221 pinctrl-0 = <&pinctrl_audmux>;
222 status = "okay";
223 };
224
225 &can1 {
226 pinctrl-names = "default", "sleep";
227 pinctrl-0 = <&pinctrl_flexcan1_default>;
228 pinctrl-1 = <&pinctrl_flexcan1_sleep>;
229 status = "disabled";
230 };
231
232 &can2 {
233 pinctrl-names = "default", "sleep";
234 pinctrl-0 = <&pinctrl_flexcan2_default>;
235 pinctrl-1 = <&pinctrl_flexcan2_sleep>;
236 status = "disabled";
237 };
238
239 &clks {
240 fsl,pmic-stby-poweroff;
241 };
242
243 /* Apalis SPI1 */
244 &ecspi1 {
245 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
246 pinctrl-names = "default";
247 pinctrl-0 = <&pinctrl_ecspi1>;
248 status = "disabled";
249 };
250
251 /* Apalis SPI2 */
252 &ecspi2 {
253 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
254 pinctrl-names = "default";
255 pinctrl-0 = <&pinctrl_ecspi2>;
256 status = "disabled";
257 };
258
259 &gpio1 {
260 gpio-line-names = "MXM3_84",
261 "MXM3_4",
262 "MXM3_15/GPIO7",
263 "MXM3_96",
264 "MXM3_37",
265 "",
266 "MXM3_17/GPIO8",
267 "MXM3_14",
268 "MXM3_12",
269 "MXM3_2",
270 "MXM3_184",
271 "MXM3_180",
272 "MXM3_178",
273 "MXM3_176",
274 "MXM3_188",
275 "MXM3_186",
276 "MXM3_160",
277 "MXM3_162",
278 "MXM3_150",
279 "MXM3_144",
280 "MXM3_154",
281 "MXM3_146",
282 "",
283 "",
284 "MXM3_72";
285 };
286
287 &gpio2 {
288 gpio-line-names = "MXM3_148",
289 "MXM3_152",
290 "MXM3_156",
291 "MXM3_158",
292 "MXM3_1/GPIO1",
293 "MXM3_3/GPIO2",
294 "MXM3_5/GPIO3",
295 "MXM3_7/GPIO4",
296 "MXM3_95",
297 "MXM3_6",
298 "MXM3_8",
299 "MXM3_123",
300 "MXM3_126",
301 "MXM3_128",
302 "MXM3_130",
303 "MXM3_132",
304 "MXM3_253",
305 "MXM3_251",
306 "MXM3_283",
307 "MXM3_281",
308 "MXM3_279",
309 "MXM3_277",
310 "MXM3_243",
311 "MXM3_235",
312 "MXM3_231",
313 "MXM3_229",
314 "MXM3_233",
315 "MXM3_198",
316 "MXM3_275",
317 "MXM3_273",
318 "MXM3_207",
319 "MXM3_122";
320 };
321
322 &gpio3 {
323 gpio-line-names = "MXM3_271",
324 "MXM3_269",
325 "MXM3_301",
326 "MXM3_299",
327 "MXM3_297",
328 "MXM3_295",
329 "MXM3_293",
330 "MXM3_291",
331 "MXM3_289",
332 "MXM3_287",
333 "MXM3_249",
334 "MXM3_247",
335 "MXM3_245",
336 "MXM3_286",
337 "MXM3_239",
338 "MXM3_35",
339 "MXM3_205",
340 "MXM3_203",
341 "MXM3_201",
342 "MXM3_116",
343 "MXM3_114",
344 "MXM3_262",
345 "MXM3_274",
346 "MXM3_124",
347 "MXM3_110",
348 "MXM3_120",
349 "MXM3_263",
350 "MXM3_265",
351 "",
352 "MXM3_135",
353 "MXM3_261",
354 "MXM3_259";
355 };
356
357 &gpio4 {
358 gpio-line-names = "",
359 "",
360 "",
361 "",
362 "",
363 "MXM3_194",
364 "MXM3_136",
365 "MXM3_134",
366 "MXM3_140",
367 "MXM3_138",
368 "",
369 "MXM3_220",
370 "",
371 "",
372 "MXM3_18",
373 "MXM3_16",
374 "",
375 "",
376 "MXM3_214",
377 "MXM3_216",
378 "MXM3_164";
379 };
380
381 &gpio5 {
382 gpio-line-names = "MXM3_159",
383 "",
384 "",
385 "",
386 "MXM3_257",
387 "",
388 "",
389 "",
390 "",
391 "",
392 "MXM3_200",
393 "MXM3_196",
394 "MXM3_204",
395 "MXM3_202",
396 "",
397 "",
398 "",
399 "",
400 "MXM3_191",
401 "MXM3_197",
402 "MXM3_77",
403 "MXM3_195",
404 "MXM3_221",
405 "MXM3_225",
406 "MXM3_223",
407 "MXM3_227",
408 "MXM3_209",
409 "MXM3_211",
410 "MXM3_118",
411 "MXM3_112",
412 "MXM3_187",
413 "MXM3_185";
414 };
415
416 &gpio6 {
417 gpio-line-names = "MXM3_183",
418 "MXM3_181",
419 "MXM3_179",
420 "MXM3_177",
421 "MXM3_175",
422 "MXM3_173",
423 "MXM3_255",
424 "MXM3_83",
425 "MXM3_91",
426 "MXM3_13/GPIO6",
427 "MXM3_11/GPIO5",
428 "MXM3_79",
429 "",
430 "",
431 "MXM3_190",
432 "MXM3_193",
433 "MXM3_89";
434 };
435
436 &gpio7 {
437 gpio-line-names = "",
438 "",
439 "",
440 "",
441 "",
442 "",
443 "",
444 "",
445 "",
446 "MXM3_99",
447 "MXM3_85",
448 "MXM3_217",
449 "MXM3_215";
450 };
451
452 &gpr {
453 ipu1_csi0_mux {
454 #address-cells = <1>;
455 #size-cells = <0>;
456 status = "disabled";
457
458 port@1 {
459 reg = <1>;
460 ipu1_csi0_mux_from_parallel_sensor: endpoint {
461 remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
462 };
463 };
464 };
465 };
466
467 &fec {
468 pinctrl-names = "default";
469 pinctrl-0 = <&pinctrl_enet>;
470 phy-mode = "rgmii-id";
471 phy-handle = <ðphy>;
472 phy-reset-duration = <10>;
473 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
474 status = "okay";
475
476 mdio {
477 #address-cells = <1>;
478 #size-cells = <0>;
479
480 ethphy: ethernet-phy@7 {
481 interrupt-parent = <&gpio1>;
482 interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
483 reg = <7>;
484 };
485 };
486 };
487
488 &hdmi {
489 pinctrl-names = "default";
490 pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
491 status = "disabled";
492 };
493
494 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
495 &i2c1 {
496 clock-frequency = <100000>;
497 pinctrl-names = "default", "gpio";
498 pinctrl-0 = <&pinctrl_i2c1>;
499 pinctrl-1 = <&pinctrl_i2c1_gpio>;
500 scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
501 sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
502 status = "disabled";
503
504 atmel_mxt_ts: touchscreen@4a {
505 compatible = "atmel,maxtouch";
506 /* These GPIOs are muxed with the iomuxc node */
507 interrupt-parent = <&gpio6>;
508 interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* MXM3_11 */
509 reg = <0x4a>;
510 reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* MXM3_13 */
511 status = "disabled";
512 };
513 };
514
515 /*
516 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
517 * touch screen controller
518 */
519 &i2c2 {
520 clock-frequency = <100000>;
521 pinctrl-names = "default", "gpio";
522 pinctrl-0 = <&pinctrl_i2c2>;
523 pinctrl-1 = <&pinctrl_i2c2_gpio>;
524 scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
525 sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
526 status = "okay";
527
528 pmic: pmic@8 {
529 compatible = "fsl,pfuze100";
530 fsl,pmic-stby-poweroff;
531 reg = <0x08>;
532
533 regulators {
534 sw1a_reg: sw1ab {
535 regulator-always-on;
536 regulator-boot-on;
537 regulator-max-microvolt = <1875000>;
538 regulator-min-microvolt = <300000>;
539 regulator-ramp-delay = <6250>;
540 };
541
542 sw1c_reg: sw1c {
543 regulator-always-on;
544 regulator-boot-on;
545 regulator-max-microvolt = <1875000>;
546 regulator-min-microvolt = <300000>;
547 regulator-ramp-delay = <6250>;
548 };
549
550 sw3a_reg: sw3a {
551 regulator-always-on;
552 regulator-boot-on;
553 regulator-max-microvolt = <1975000>;
554 regulator-min-microvolt = <400000>;
555 };
556
557 swbst_reg: swbst {
558 regulator-always-on;
559 regulator-boot-on;
560 regulator-max-microvolt = <5150000>;
561 regulator-min-microvolt = <5000000>;
562 };
563
564 snvs_reg: vsnvs {
565 regulator-always-on;
566 regulator-boot-on;
567 regulator-max-microvolt = <3000000>;
568 regulator-min-microvolt = <1000000>;
569 };
570
571 vref_reg: vrefddr {
572 regulator-always-on;
573 regulator-boot-on;
574 };
575
576 vgen1_reg: vgen1 {
577 regulator-always-on;
578 regulator-boot-on;
579 regulator-max-microvolt = <1550000>;
580 regulator-min-microvolt = <800000>;
581 };
582
583 vgen2_reg: vgen2 {
584 regulator-always-on;
585 regulator-boot-on;
586 regulator-max-microvolt = <1550000>;
587 regulator-min-microvolt = <800000>;
588 };
589
590 vgen3_reg: vgen3 {
591 regulator-always-on;
592 regulator-boot-on;
593 regulator-max-microvolt = <3300000>;
594 regulator-min-microvolt = <1800000>;
595 };
596
597 vgen4_reg: vgen4 {
598 regulator-always-on;
599 regulator-boot-on;
600 regulator-max-microvolt = <1800000>;
601 regulator-min-microvolt = <1800000>;
602 };
603
604 vgen5_reg: vgen5 {
605 regulator-always-on;
606 regulator-boot-on;
607 regulator-max-microvolt = <3300000>;
608 regulator-min-microvolt = <1800000>;
609 };
610
611 vgen6_reg: vgen6 {
612 regulator-always-on;
613 regulator-boot-on;
614 regulator-max-microvolt = <3300000>;
615 regulator-min-microvolt = <1800000>;
616 };
617 };
618 };
619
620 codec: sgtl5000@a {
621 compatible = "fsl,sgtl5000";
622 #sound-dai-cells = <0>;
623 clocks = <&clks IMX6QDL_CLK_CKO>;
624 pinctrl-names = "default";
625 pinctrl-0 = <&pinctrl_sgtl5000>;
626 reg = <0x0a>;
627 VDDA-supply = <®_module_3v3_audio>;
628 VDDIO-supply = <®_module_3v3>;
629 VDDD-supply = <&vgen4_reg>;
630 };
631
632 /* STMPE811 touch screen controller */
633 stmpe811@41 {
634 compatible = "st,stmpe811";
635 blocks = <0x5>;
636 id = <0>;
637 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
638 interrupt-parent = <&gpio4>;
639 irq-trigger = <0x1>;
640 pinctrl-names = "default";
641 pinctrl-0 = <&pinctrl_touch_int>;
642 reg = <0x41>;
643 /* 3.25 MHz ADC clock speed */
644 st,adc-freq = <1>;
645 /* 12-bit ADC */
646 st,mod-12b = <1>;
647 /* internal ADC reference */
648 st,ref-sel = <0>;
649 /* ADC conversion time: 80 clocks */
650 st,sample-time = <4>;
651
652 stmpe_ts: stmpe_touchscreen {
653 compatible = "st,stmpe-ts";
654 /* 8 sample average control */
655 st,ave-ctrl = <3>;
656 /* 7 length fractional part in z */
657 st,fraction-z = <7>;
658 /*
659 * 50 mA typical 80 mA max touchscreen drivers
660 * current limit value
661 */
662 st,i-drive = <1>;
663 /* 1 ms panel driver settling time */
664 st,settling = <3>;
665 /* 5 ms touch detect interrupt delay */
666 st,touch-det-delay = <5>;
667 status = "disabled";
668 };
669
670 stmpe_adc: stmpe_adc {
671 compatible = "st,stmpe-adc";
672 #io-channel-cells = <1>;
673 /* forbid to use ADC channels 3-0 (touch) */
674 st,norequest-mask = <0x0F>;
675 };
676 };
677 };
678
679 /*
680 * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
681 * board)
682 */
683 &i2c3 {
684 clock-frequency = <100000>;
685 pinctrl-names = "default", "gpio";
686 pinctrl-0 = <&pinctrl_i2c3>;
687 pinctrl-1 = <&pinctrl_i2c3_gpio>;
688 scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
689 sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
690 status = "disabled";
691
692 adv_7280: adv7280@21 {
693 compatible = "adi,adv7280";
694 adv,force-bt656-4;
695 pinctrl-names = "default";
696 pinctrl-0 = <&pinctrl_ipu1_csi0>;
697 reg = <0x21>;
698 status = "disabled";
699
700 port {
701 adv7280_to_ipu1_csi0_mux: endpoint {
702 bus-width = <8>;
703 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
704 };
705 };
706 };
707
708 ov5640_csi_cam: ov5640_mipi@3c {
709 compatible = "ovti,ov5640";
710 AVDD-supply = <®_ov5640_2v8_a_vdd>;
711 DOVDD-supply = <®_ov5640_1v8_d_o_vdd>;
712 DVDD-supply = <®_ov5640_1v8_d_o_vdd>;
713 clock-names = "xclk";
714 clocks = <&clks IMX6QDL_CLK_CKO2>;
715 pinctrl-names = "default";
716 pinctrl-0 = <&pinctrl_cam_mclk>;
717 /* These GPIOs are muxed with the iomuxc node */
718 powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
719 reg = <0x3c>;
720 reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
721 status = "disabled";
722
723 port {
724 ov5640_to_mipi_csi2: endpoint {
725 clock-lanes = <0>;
726 data-lanes = <1 2>;
727 remote-endpoint = <&mipi_csi_from_ov5640>;
728 };
729 };
730 };
731 };
732
733 &ipu1_di1_disp1 {
734 remote-endpoint = <&lcd_display_in>;
735 };
736
737 &ldb {
738 lvds-channel@0 {
739 port@4 {
740 reg = <4>;
741
742 lvds0_out: endpoint {
743 remote-endpoint = <&lvds_panel_in>;
744 };
745 };
746 };
747
748 lvds-channel@1 {
749 fsl,data-mapping = "spwg";
750 fsl,data-width = <18>;
751
752 port@4 {
753 reg = <4>;
754
755 lvds1_out: endpoint {
756 };
757 };
758 };
759 };
760
761 &mipi_csi {
762 #address-cells = <1>;
763 #size-cells = <0>;
764 status = "disabled";
765
766 port@0 {
767 reg = <0>;
768
769 mipi_csi_from_ov5640: endpoint {
770 clock-lanes = <0>;
771 data-lanes = <1 2>;
772 remote-endpoint = <&ov5640_to_mipi_csi2>;
773 };
774 };
775 };
776
777 &pwm1 {
778 pinctrl-names = "default";
779 pinctrl-0 = <&pinctrl_pwm1>;
780 status = "disabled";
781 };
782
783 &pwm2 {
784 pinctrl-names = "default";
785 pinctrl-0 = <&pinctrl_pwm2>;
786 status = "disabled";
787 };
788
789 &pwm3 {
790 pinctrl-names = "default";
791 pinctrl-0 = <&pinctrl_pwm3>;
792 status = "disabled";
793 };
794
795 &pwm4 {
796 pinctrl-names = "default";
797 pinctrl-0 = <&pinctrl_pwm4>;
798 status = "disabled";
799 };
800
801 &spdif {
802 pinctrl-names = "default";
803 pinctrl-0 = <&pinctrl_spdif>;
804 status = "disabled";
805 };
806
807 &ssi1 {
808 status = "okay";
809 };
810
811 &uart1 {
812 fsl,dte-mode;
813 pinctrl-names = "default";
814 pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
815 uart-has-rtscts;
816 status = "disabled";
817 };
818
819 &uart2 {
820 fsl,dte-mode;
821 pinctrl-names = "default";
822 pinctrl-0 = <&pinctrl_uart2_dte>;
823 uart-has-rtscts;
824 status = "disabled";
825 };
826
827 &uart4 {
828 fsl,dte-mode;
829 pinctrl-names = "default";
830 pinctrl-0 = <&pinctrl_uart4_dte>;
831 status = "disabled";
832 };
833
834 &uart5 {
835 fsl,dte-mode;
836 pinctrl-names = "default";
837 pinctrl-0 = <&pinctrl_uart5_dte>;
838 status = "disabled";
839 };
840
841 &usbotg {
842 pinctrl-names = "default";
843 pinctrl-0 = <&pinctrl_usbotg>;
844 status = "disabled";
845 };
846
847 /* MMC1 */
848 &usdhc1 {
849 bus-width = <8>;
850 cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
851 disable-wp;
852 no-1-8-v;
853 pinctrl-names = "default";
854 pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
855 vqmmc-supply = <®_module_3v3>;
856 status = "disabled";
857 };
858
859 /* SD1 */
860 &usdhc2 {
861 bus-width = <4>;
862 disable-wp;
863 no-1-8-v;
864 pinctrl-names = "default";
865 pinctrl-0 = <&pinctrl_usdhc2>;
866 vqmmc-supply = <®_module_3v3>;
867 status = "disabled";
868 };
869
870 /* eMMC */
871 &usdhc3 {
872 bus-width = <8>;
873 no-1-8-v;
874 non-removable;
875 pinctrl-names = "default";
876 pinctrl-0 = <&pinctrl_usdhc3>;
877 vqmmc-supply = <®_module_3v3>;
878 status = "okay";
879 };
880
881 &weim {
882 status = "disabled";
883 };
884
885 &iomuxc {
886 /* Mux the Apalis GPIOs */
887 pinctrl-names = "default";
888 pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
889 &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
890 &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
891 &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
892 >;
893
894 pinctrl_apalis_gpio1: apalisgpio1grp {
895 fsl,pins = <
896 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
897 >;
898 };
899
900 pinctrl_apalis_gpio2: apalisgpio2grp {
901 fsl,pins = <
902 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
903 >;
904 };
905
906 pinctrl_apalis_gpio3: apalisgpio3grp {
907 fsl,pins = <
908 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
909 >;
910 };
911
912 pinctrl_apalis_gpio4: apalisgpio4grp {
913 fsl,pins = <
914 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
915 >;
916 };
917
918 pinctrl_apalis_gpio5: apalisgpio5grp {
919 fsl,pins = <
920 MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
921 >;
922 };
923
924 pinctrl_apalis_gpio6: apalisgpio6grp {
925 fsl,pins = <
926 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
927 >;
928 };
929
930 pinctrl_apalis_gpio7: apalisgpio7grp {
931 fsl,pins = <
932 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
933 >;
934 };
935
936 pinctrl_apalis_gpio8: apalisgpio8grp {
937 fsl,pins = <
938 MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
939 >;
940 };
941
942 pinctrl_audmux: audmuxgrp {
943 fsl,pins = <
944 MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
945 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
946 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
947 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
948 >;
949 };
950
951 pinctrl_cam_mclk: cammclkgrp {
952 fsl,pins = <
953 /* CAM sys_mclk */
954 MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
955 >;
956 };
957
958 pinctrl_ecspi1: ecspi1grp {
959 fsl,pins = <
960 MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
961 MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
962 MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
963 /* SPI1 cs */
964 MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
965 >;
966 };
967
968 pinctrl_ecspi2: ecspi2grp {
969 fsl,pins = <
970 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
971 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
972 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
973 /* SPI2 cs */
974 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
975 >;
976 };
977
978 pinctrl_enet: enetgrp {
979 fsl,pins = <
980 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
981 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
982 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
983 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
984 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
985 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
986 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
987 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
988 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
989 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
990 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
991 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
992 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
993 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
994 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
995 /* Ethernet PHY reset */
996 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
997 /* Ethernet PHY interrupt */
998 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1
999 >;
1000 };
1001
1002 pinctrl_flexcan1_default: flexcan1defgrp {
1003 fsl,pins = <
1004 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
1005 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
1006 >;
1007 };
1008
1009 pinctrl_flexcan1_sleep: flexcan1slpgrp {
1010 fsl,pins = <
1011 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
1012 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
1013 >;
1014 };
1015
1016 pinctrl_flexcan2_default: flexcan2defgrp {
1017 fsl,pins = <
1018 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
1019 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
1020 >;
1021 };
1022 pinctrl_flexcan2_sleep: flexcan2slpgrp {
1023 fsl,pins = <
1024 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
1025 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
1026 >;
1027 };
1028
1029 pinctrl_gpio_bl_on: gpioblongrp {
1030 fsl,pins = <
1031 MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
1032 >;
1033 };
1034
1035 pinctrl_gpio_keys: gpio1io04grp {
1036 fsl,pins = <
1037 /* Power button */
1038 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
1039 >;
1040 };
1041
1042 pinctrl_hdmi_cec: hdmicecgrp {
1043 fsl,pins = <
1044 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
1045 >;
1046 };
1047
1048 pinctrl_hdmi_ddc: hdmiddcgrp {
1049 fsl,pins = <
1050 MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
1051 MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
1052 >;
1053 };
1054
1055 pinctrl_i2c1: i2c1grp {
1056 fsl,pins = <
1057 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
1058 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
1059 >;
1060 };
1061
1062 pinctrl_i2c1_gpio: i2c1gpiogrp {
1063 fsl,pins = <
1064 MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
1065 MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
1066 >;
1067 };
1068
1069 pinctrl_i2c2: i2c2grp {
1070 fsl,pins = <
1071 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
1072 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
1073 >;
1074 };
1075
1076 pinctrl_i2c2_gpio: i2c2gpiogrp {
1077 fsl,pins = <
1078 MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
1079 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
1080 >;
1081 };
1082
1083 pinctrl_i2c3: i2c3grp {
1084 fsl,pins = <
1085 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
1086 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
1087 >;
1088 };
1089
1090 pinctrl_i2c3_gpio: i2c3gpiogrp {
1091 fsl,pins = <
1092 MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
1093 MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
1094 >;
1095 };
1096
1097 pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
1098 fsl,pins = <
1099 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1
1100 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1
1101 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1
1102 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1
1103 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1
1104 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1
1105 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1
1106 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1
1107 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
1108 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1
1109 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1
1110 >;
1111 };
1112
1113 pinctrl_ipu1_lcdif: ipu1lcdifgrp {
1114 fsl,pins = <
1115 MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61
1116 /* DE */
1117 MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61
1118 /* HSync */
1119 MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61
1120 /* VSync */
1121 MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61
1122 MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61
1123 MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61
1124 MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61
1125 MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61
1126 MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61
1127 MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61
1128 MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61
1129 MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61
1130 MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61
1131 MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61
1132 MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61
1133 MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61
1134 MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61
1135 MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61
1136 MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61
1137 MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61
1138 MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61
1139 MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61
1140 MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61
1141 MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61
1142 MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61
1143 MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61
1144 MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61
1145 MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61
1146 >;
1147 };
1148
1149 pinctrl_ipu2_vdac: ipu2vdacgrp {
1150 fsl,pins = <
1151 MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
1152 MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1
1153 MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1
1154 MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1
1155 MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9
1156 MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9
1157 MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9
1158 MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9
1159 MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9
1160 MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9
1161 MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9
1162 MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9
1163 MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9
1164 MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9
1165 MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9
1166 MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9
1167 MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9
1168 MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9
1169 MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9
1170 MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9
1171 >;
1172 };
1173
1174 pinctrl_mmc_cd: mmccdgrp {
1175 fsl,pins = <
1176 /* MMC1 CD */
1177 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
1178 >;
1179 };
1180
1181 pinctrl_pwm1: pwm1grp {
1182 fsl,pins = <
1183 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
1184 >;
1185 };
1186
1187 pinctrl_pwm2: pwm2grp {
1188 fsl,pins = <
1189 MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
1190 >;
1191 };
1192
1193 pinctrl_pwm3: pwm3grp {
1194 fsl,pins = <
1195 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
1196 >;
1197 };
1198
1199 pinctrl_pwm4: pwm4grp {
1200 fsl,pins = <
1201 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
1202 >;
1203 };
1204
1205 pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
1206 fsl,pins = <
1207 /* USBH_EN */
1208 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
1209 >;
1210 };
1211
1212 pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
1213 fsl,pins = <
1214 /* USBH_HUB_EN */
1215 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
1216 >;
1217 };
1218
1219 pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
1220 fsl,pins = <
1221 /* USBO1 power en */
1222 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
1223 >;
1224 };
1225
1226 pinctrl_reset_moci: resetmocigrp {
1227 fsl,pins = <
1228 /* RESET_MOCI control */
1229 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
1230 >;
1231 };
1232
1233 pinctrl_sd_cd: sdcdgrp {
1234 fsl,pins = <
1235 /* SD1 CD */
1236 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
1237 >;
1238 };
1239
1240 pinctrl_sgtl5000: sgtl5000grp {
1241 fsl,pins = <
1242 MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
1243 >;
1244 };
1245
1246 pinctrl_spdif: spdifgrp {
1247 fsl,pins = <
1248 MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
1249 MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
1250 >;
1251 };
1252
1253 pinctrl_touch_int: touchintgrp {
1254 fsl,pins = <
1255 /* STMPE811 interrupt */
1256 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
1257 >;
1258 };
1259
1260 /* Additional DTR, DSR, DCD */
1261 pinctrl_uart1_ctrl: uart1ctrlgrp {
1262 fsl,pins = <
1263 MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
1264 MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
1265 MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
1266 >;
1267 };
1268
1269 pinctrl_uart1_dce: uart1dcegrp {
1270 fsl,pins = <
1271 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
1272 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
1273 >;
1274 };
1275
1276 /* DTE mode */
1277 pinctrl_uart1_dte: uart1dtegrp {
1278 fsl,pins = <
1279 MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
1280 MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
1281 MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
1282 MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
1283 >;
1284 };
1285
1286 pinctrl_uart2_dce: uart2dcegrp {
1287 fsl,pins = <
1288 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
1289 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
1290 >;
1291 };
1292
1293 /* DTE mode */
1294 pinctrl_uart2_dte: uart2dtegrp {
1295 fsl,pins = <
1296 MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
1297 MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
1298 MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
1299 MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
1300 >;
1301 };
1302
1303 pinctrl_uart4_dce: uart4dcegrp {
1304 fsl,pins = <
1305 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
1306 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
1307 >;
1308 };
1309
1310 /* DTE mode */
1311 pinctrl_uart4_dte: uart4dtegrp {
1312 fsl,pins = <
1313 MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
1314 MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
1315 >;
1316 };
1317
1318 pinctrl_uart5_dce: uart5dcegrp {
1319 fsl,pins = <
1320 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
1321 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
1322 >;
1323 };
1324
1325 /* DTE mode */
1326 pinctrl_uart5_dte: uart5dtegrp {
1327 fsl,pins = <
1328 MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
1329 MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
1330 >;
1331 };
1332
1333 pinctrl_usbotg: usbotggrp {
1334 fsl,pins = <
1335 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
1336 >;
1337 };
1338
1339 pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
1340 fsl,pins = <
1341 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
1342 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
1343 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
1344 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
1345 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
1346 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
1347 >;
1348 };
1349
1350 pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
1351 fsl,pins = <
1352 MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
1353 MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
1354 MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
1355 MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
1356 >;
1357 };
1358
1359 pinctrl_usdhc2: usdhc2grp {
1360 fsl,pins = <
1361 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
1362 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
1363 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
1364 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
1365 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
1366 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
1367 >;
1368 };
1369
1370 pinctrl_usdhc3: usdhc3grp {
1371 fsl,pins = <
1372 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
1373 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
1374 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
1375 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
1376 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
1377 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
1378 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
1379 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
1380 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
1381 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
1382 /* eMMC reset */
1383 MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059
1384 >;
1385 };
1386 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.