1 /*
2 * support for the imx6 based aristainetos2 board
3 *
4 * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * version 2 as published by the Free Software Foundation.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43 #include <dt-bindings/gpio/gpio.h>
44 #include <dt-bindings/clock/imx6qdl-clock.h>
45
46 / {
47 backlight: backlight {
48 compatible = "pwm-backlight";
49 pwms = <&pwm1 0 5000000 0>;
50 brightness-levels = <0 4 8 16 32 64 128 255>;
51 default-brightness-level = <7>;
52 enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
53 };
54
55 reg_2p5v: regulator-2p5v {
56 compatible = "regulator-fixed";
57 regulator-name = "2P5V";
58 regulator-min-microvolt = <2500000>;
59 regulator-max-microvolt = <2500000>;
60 regulator-always-on;
61 };
62
63 reg_3p3v: regulator-3p3v {
64 compatible = "regulator-fixed";
65 regulator-name = "3P3V";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
68 regulator-always-on;
69 };
70
71 reg_usbh1_vbus: regulator-usbh1-vbus {
72 compatible = "regulator-fixed";
73 enable-active-high;
74 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
77 regulator-name = "usb_h1_vbus";
78 regulator-min-microvolt = <5000000>;
79 regulator-max-microvolt = <5000000>;
80 };
81
82 reg_usbotg_vbus: regulator-usbotg-vbus {
83 compatible = "regulator-fixed";
84 enable-active-high;
85 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
88 regulator-name = "usb_otg_vbus";
89 regulator-min-microvolt = <5000000>;
90 regulator-max-microvolt = <5000000>;
91 };
92 };
93
94 &audmux {
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_audmux>;
97 status = "okay";
98 };
99
100 &can1 {
101 pinctrl-names = "default";
102 pinctrl-0 = <&pinctrl_flexcan1>;
103 status = "okay";
104 };
105
106 &can2 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&pinctrl_flexcan2>;
109 status = "okay";
110 };
111
112 &ecspi1 {
113 cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
114 &gpio4 10 GPIO_ACTIVE_LOW
115 &gpio4 11 GPIO_ACTIVE_LOW>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_ecspi1>;
118 status = "okay";
119 };
120
121 &ecspi2 {
122 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_ecspi2>;
125 status = "okay";
126 };
127
128 &ecspi4 {
129 cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_ecspi4>;
132 status = "okay";
133
134 flash: flash@1 {
135 #address-cells = <1>;
136 #size-cells = <1>;
137 compatible = "micron,n25q128a11", "jedec,spi-nor";
138 spi-max-frequency = <20000000>;
139 reg = <1>;
140 };
141 };
142
143 &i2c1 {
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_i2c1>;
146 status = "okay";
147
148 pmic@58 {
149 compatible = "dlg,da9063";
150 reg = <0x58>;
151 interrupt-parent = <&gpio1>;
152 interrupts = <04 0x8>;
153
154 regulators {
155 bcore1 {
156 regulator-name = "bcore1";
157 regulator-always-on;
158 regulator-min-microvolt = <300000>;
159 regulator-max-microvolt = <3300000>;
160 };
161
162 bcore2 {
163 regulator-name = "bcore2";
164 regulator-always-on;
165 regulator-min-microvolt = <300000>;
166 regulator-max-microvolt = <3300000>;
167 };
168
169 bpro {
170 regulator-name = "bpro";
171 regulator-always-on;
172 regulator-min-microvolt = <300000>;
173 regulator-max-microvolt = <3300000>;
174 };
175
176 bperi {
177 regulator-name = "bperi";
178 regulator-always-on;
179 regulator-min-microvolt = <300000>;
180 regulator-max-microvolt = <3300000>;
181 };
182
183 bmem {
184 regulator-name = "bmem";
185 regulator-always-on;
186 regulator-min-microvolt = <300000>;
187 regulator-max-microvolt = <3300000>;
188 };
189
190 ldo2 {
191 regulator-name = "ldo2";
192 regulator-always-on;
193 regulator-min-microvolt = <300000>;
194 regulator-max-microvolt = <1800000>;
195 };
196
197 ldo3 {
198 regulator-name = "ldo3";
199 regulator-always-on;
200 regulator-min-microvolt = <300000>;
201 regulator-max-microvolt = <3300000>;
202 };
203
204 ldo4 {
205 regulator-name = "ldo4";
206 regulator-always-on;
207 regulator-min-microvolt = <300000>;
208 regulator-max-microvolt = <3300000>;
209 };
210
211 ldo5 {
212 regulator-name = "ldo5";
213 regulator-always-on;
214 regulator-min-microvolt = <300000>;
215 regulator-max-microvolt = <3300000>;
216 };
217
218 ldo6 {
219 regulator-name = "ldo6";
220 regulator-always-on;
221 regulator-min-microvolt = <300000>;
222 regulator-max-microvolt = <3300000>;
223 };
224
225 ldo7 {
226 regulator-name = "ldo7";
227 regulator-always-on;
228 regulator-min-microvolt = <300000>;
229 regulator-max-microvolt = <3300000>;
230 };
231
232 ldo8 {
233 regulator-name = "ldo8";
234 regulator-always-on;
235 regulator-min-microvolt = <300000>;
236 regulator-max-microvolt = <3300000>;
237 };
238
239 ldo9 {
240 regulator-name = "ldo9";
241 regulator-always-on;
242 regulator-min-microvolt = <300000>;
243 regulator-max-microvolt = <3300000>;
244 };
245
246 ldo10 {
247 regulator-name = "ldo10";
248 regulator-always-on;
249 regulator-min-microvolt = <300000>;
250 regulator-max-microvolt = <3300000>;
251 };
252
253 ldo11 {
254 regulator-name = "ldo11";
255 regulator-always-on;
256 regulator-min-microvolt = <300000>;
257 regulator-max-microvolt = <3300000>;
258 };
259
260 bio {
261 regulator-name = "bio";
262 regulator-always-on;
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 };
266 };
267 };
268
269 tmp103: tmp103@71 {
270 compatible = "ti,tmp103";
271 reg = <0x71>;
272 };
273 };
274
275 &i2c2 {
276 pinctrl-names = "default";
277 pinctrl-0 = <&pinctrl_i2c2>;
278 status = "okay";
279 };
280
281 &i2c3 {
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_i2c3>;
284 status = "okay";
285
286 expander: tca6416@20 {
287 compatible = "ti,tca6416";
288 reg = <0x20>;
289 #gpio-cells = <2>;
290 gpio-controller;
291 };
292
293 rtc@68 {
294 compatible = "dallas,m41t00";
295 reg = <0x68>;
296 };
297 };
298
299 &i2c4 {
300 pinctrl-names = "default";
301 pinctrl-0 = <&pinctrl_i2c4>;
302 status = "okay";
303
304 eeprom@50 {
305 compatible = "atmel,24c64";
306 reg = <0x50>;
307 };
308
309 eeprom@57 {
310 compatible = "atmel,24c64";
311 reg = <0x57>;
312 };
313 };
314
315 &fec {
316 pinctrl-names = "default";
317 pinctrl-0 = <&pinctrl_enet>;
318 phy-mode = "rgmii";
319 phy-handle = <ðphy>;
320 phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
321 status = "okay";
322
323 mdio {
324 #address-cells = <1>;
325 #size-cells = <0>;
326
327 ethphy: ethernet-phy {
328 compatible = "ethernet-phy-ieee802.3-c22";
329 txd0-skew-ps = <0>;
330 txd1-skew-ps = <0>;
331 txd2-skew-ps = <0>;
332 txd3-skew-ps = <0>;
333 };
334 };
335 };
336
337 &gpmi {
338 pinctrl-names = "default";
339 pinctrl-0 = <&pinctrl_gpmi_nand>;
340 status = "okay";
341 };
342
343 &pcie {
344 reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
345 status = "okay";
346 };
347
348 &pwm1 {
349 pinctrl-names = "default";
350 pinctrl-0 = <&pinctrl_pwm1>;
351 status = "okay";
352 };
353
354 &uart1 {
355 pinctrl-names = "default";
356 pinctrl-0 = <&pinctrl_uart1>;
357 uart-has-rtscts;
358 status = "okay";
359 };
360
361 &uart2 {
362 pinctrl-names = "default";
363 pinctrl-0 = <&pinctrl_uart2>;
364 status = "okay";
365 };
366
367 &uart3 {
368 pinctrl-names = "default";
369 pinctrl-0 = <&pinctrl_uart3>;
370 uart-has-rtscts;
371 status = "okay";
372 };
373
374 &uart4 {
375 pinctrl-names = "default";
376 pinctrl-0 = <&pinctrl_uart4>;
377 status = "okay";
378 };
379
380 &usbh1 {
381 vbus-supply = <®_usbh1_vbus>;
382 dr_mode = "host";
383 status = "okay";
384 };
385
386 &usbotg {
387 vbus-supply = <®_usbotg_vbus>;
388 pinctrl-names = "default";
389 pinctrl-0 = <&pinctrl_usbotg>;
390 disable-over-current;
391 dr_mode = "host";
392 status = "okay";
393 };
394
395 &usdhc1 {
396 pinctrl-names = "default";
397 pinctrl-0 = <&pinctrl_usdhc1>;
398 cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
399 no-1-8-v;
400 status = "okay";
401 };
402
403 &usdhc2 {
404 pinctrl-names = "default";
405 pinctrl-0 = <&pinctrl_usdhc2>;
406 cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
407 wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
408 no-1-8-v;
409 status = "okay";
410 };
411
412 &iomuxc {
413 pinctrl-names = "default";
414 pinctrl-0 = <&pinctrl_gpio>;
415
416 pinctrl_audmux: audmux {
417 fsl,pins = <
418 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
419 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
420 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
421 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
422 >;
423 };
424
425 pinctrl_ecspi1: ecspi1grp {
426 fsl,pins = <
427 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
428 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
429 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
430 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
431 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
432 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
433 >;
434 };
435
436 pinctrl_ecspi2: ecspi2grp {
437 fsl,pins = <
438 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
439 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
440 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
441 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
442 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
443 >;
444 };
445
446 pinctrl_ecspi4: ecspi4grp {
447 fsl,pins = <
448 MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
449 MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
450 MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
451 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
452 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
453 MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
454 >;
455 };
456
457 pinctrl_enet: enetgrp {
458 fsl,pins = <
459 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
460 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
461 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
462 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
463 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
464 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
465 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
466 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
467 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
468 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
469 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
470 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
471 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
472 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
473 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
474 >;
475 };
476
477 pinctrl_flexcan1: flexcan1grp {
478 fsl,pins = <
479 MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
480 MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
481 >;
482 };
483
484 pinctrl_flexcan2: flexcan2grp {
485 fsl,pins = <
486 MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
487 MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
488 >;
489 };
490
491 pinctrl_gpio: gpiogrp {
492 fsl,pins = <
493 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */
494 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */
495 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */
496 MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */
497 MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */
498 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */
499 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */
500 MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */
501 MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */
502 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
503 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
504 MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */
505 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */
506 >;
507 };
508
509 pinctrl_gpmi_nand: gpminandgrp {
510 fsl,pins = <
511 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
512 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
513 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
514 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
515 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
516 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
517 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
518 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
519 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
520 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
521 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
522 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
523 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
524 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
525 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
526 >;
527 };
528
529 pinctrl_i2c1: i2c1grp {
530 fsl,pins = <
531 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
532 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
533 >;
534 };
535
536 pinctrl_i2c2: i2c2grp {
537 fsl,pins = <
538 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
539 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
540 >;
541 };
542
543 pinctrl_i2c3: i2c3grp {
544 fsl,pins = <
545 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
546 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
547 >;
548 };
549
550 pinctrl_i2c4: i2c4grp {
551 fsl,pins = <
552 MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
553 MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
554 >;
555 };
556
557 pinctrl_pwm1: pwm1grp {
558 fsl,pins = <
559 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
560 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */
561 >;
562 };
563
564 pinctrl_uart1: uart1grp {
565 fsl,pins = <
566 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
567 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
568 MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
569 MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
570 >;
571 };
572
573 pinctrl_uart2: uart2grp {
574 fsl,pins = <
575 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
576 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
577 >;
578 };
579
580 pinctrl_uart3: uart3grp {
581 fsl,pins = <
582 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
583 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
584 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
585 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
586 >;
587 };
588
589 pinctrl_uart4: uart4grp {
590 fsl,pins = <
591 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
592 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
593 >;
594 };
595
596 pinctrl_usbotg: usbotggrp {
597 fsl,pins = <
598 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
599 >;
600 };
601
602 pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
603 fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
604 };
605
606 pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
607 fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
608 };
609
610 pinctrl_usdhc1: usdhc1grp {
611 fsl,pins = <
612 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
613 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
614 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
615 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
616 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
617 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
618 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */
619 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */
620 >;
621 };
622
623 pinctrl_usdhc2: usdhc2grp {
624 fsl,pins = <
625 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
626 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
627 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
628 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
629 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
630 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
631 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */
632 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */
633 MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */
634 >;
635 };
636 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.