~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm/nxp/imx/imx6qdl-gw560x.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 /*
  2  * Copyright 2017 Gateworks Corporation
  3  *
  4  * This file is dual-licensed: you can use it either under the terms
  5  * of the GPL or the X11 license, at your option. Note that this dual
  6  * licensing only applies to this file, and not this project as a
  7  * whole.
  8  *
  9  *  a) This file is free software; you can redistribute it and/or
 10  *     modify it under the terms of the GNU General Public License as
 11  *     published by the Free Software Foundation; either version 2 of
 12  *     the License, or (at your option) any later version.
 13  *
 14  *     This file is distributed in the hope that it will be useful,
 15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17  *     GNU General Public License for more details.
 18  *
 19  *     You should have received a copy of the GNU General Public
 20  *     License along with this file; if not, write to the Free
 21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 22  *     MA 02110-1301 USA
 23  *
 24  * Or, alternatively,
 25  *
 26  *  b) Permission is hereby granted, free of charge, to any person
 27  *     obtaining a copy of this software and associated documentation
 28  *     files (the "Software"), to deal in the Software without
 29  *     restriction, including without limitation the rights to use,
 30  *     copy, modify, merge, publish, distribute, sublicense, and/or
 31  *     sell copies of the Software, and to permit persons to whom the
 32  *     Software is furnished to do so, subject to the following
 33  *     conditions:
 34  *
 35  *     The above copyright notice and this permission notice shall be
 36  *     included in all copies or substantial portions of the Software.
 37  *
 38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 45  *     OTHER DEALINGS IN THE SOFTWARE.
 46  */
 47 
 48 #include <dt-bindings/gpio/gpio.h>
 49 #include <dt-bindings/input/input.h>
 50 #include <dt-bindings/interrupt-controller/irq.h>
 51 
 52 / {
 53         /* these are used by bootloader for disabling nodes */
 54         aliases {
 55                 led0 = &led0;
 56                 led1 = &led1;
 57                 led2 = &led2;
 58                 ssi0 = &ssi1;
 59                 usb0 = &usbh1;
 60                 usb1 = &usbotg;
 61         };
 62 
 63         chosen {
 64                 stdout-path = &uart2;
 65         };
 66 
 67         backlight-display {
 68                 compatible = "pwm-backlight";
 69                 pwms = <&pwm4 0 5000000 0>;
 70                 brightness-levels = <
 71                         0  1  2  3  4  5  6  7  8  9
 72                         10 11 12 13 14 15 16 17 18 19
 73                         20 21 22 23 24 25 26 27 28 29
 74                         30 31 32 33 34 35 36 37 38 39
 75                         40 41 42 43 44 45 46 47 48 49
 76                         50 51 52 53 54 55 56 57 58 59
 77                         60 61 62 63 64 65 66 67 68 69
 78                         70 71 72 73 74 75 76 77 78 79
 79                         80 81 82 83 84 85 86 87 88 89
 80                         90 91 92 93 94 95 96 97 98 99
 81                         100
 82                         >;
 83                 default-brightness-level = <100>;
 84         };
 85 
 86         backlight-keypad {
 87                 compatible = "gpio-backlight";
 88                 gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
 89                 default-on;
 90         };
 91 
 92         gpio-keys {
 93                 compatible = "gpio-keys";
 94 
 95                 user-pb {
 96                         label = "user_pb";
 97                         gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 98                         linux,code = <BTN_0>;
 99                 };
100 
101                 user-pb1x {
102                         label = "user_pb1x";
103                         linux,code = <BTN_1>;
104                         interrupt-parent = <&gsc>;
105                         interrupts = <0>;
106                 };
107 
108                 key-erased {
109                         label = "key-erased";
110                         linux,code = <BTN_2>;
111                         interrupt-parent = <&gsc>;
112                         interrupts = <1>;
113                 };
114 
115                 eeprom-wp {
116                         label = "eeprom_wp";
117                         linux,code = <BTN_3>;
118                         interrupt-parent = <&gsc>;
119                         interrupts = <2>;
120                 };
121 
122                 tamper {
123                         label = "tamper";
124                         linux,code = <BTN_4>;
125                         interrupt-parent = <&gsc>;
126                         interrupts = <5>;
127                 };
128 
129                 switch-hold {
130                         label = "switch_hold";
131                         linux,code = <BTN_5>;
132                         interrupt-parent = <&gsc>;
133                         interrupts = <7>;
134                 };
135         };
136 
137         leds {
138                 compatible = "gpio-leds";
139                 pinctrl-names = "default";
140                 pinctrl-0 = <&pinctrl_gpio_leds>;
141 
142                 led0: led-user1 {
143                         label = "user1";
144                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
145                         default-state = "on";
146                         linux,default-trigger = "heartbeat";
147                 };
148 
149                 led1: led-user2 {
150                         label = "user2";
151                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
152                         default-state = "off";
153                 };
154 
155                 led2: led-user3 {
156                         label = "user3";
157                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
158                         default-state = "off";
159                 };
160         };
161 
162         memory@10000000 {
163                 device_type = "memory";
164                 reg = <0x10000000 0x40000000>;
165         };
166 
167         pps {
168                 compatible = "pps-gpio";
169                 pinctrl-names = "default";
170                 pinctrl-0 = <&pinctrl_pps>;
171                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
172         };
173 
174         reg_2p5v: regulator-2p5v {
175                 compatible = "regulator-fixed";
176                 regulator-name = "2P5V";
177                 regulator-min-microvolt = <2500000>;
178                 regulator-max-microvolt = <2500000>;
179                 regulator-always-on;
180         };
181 
182         reg_3p3v: regulator-3p3v {
183                 compatible = "regulator-fixed";
184                 regulator-name = "3P3V";
185                 regulator-min-microvolt = <3300000>;
186                 regulator-max-microvolt = <3300000>;
187                 regulator-always-on;
188         };
189 
190         reg_5p0v: regulator-5p0v {
191                 compatible = "regulator-fixed";
192                 regulator-name = "5P0V";
193                 regulator-min-microvolt = <5000000>;
194                 regulator-max-microvolt = <5000000>;
195                 regulator-always-on;
196         };
197 
198         reg_12p0v: regulator-12p0v {
199                 compatible = "regulator-fixed";
200                 regulator-name = "12P0V";
201                 regulator-min-microvolt = <12000000>;
202                 regulator-max-microvolt = <12000000>;
203                 gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
204                 enable-active-high;
205         };
206 
207         reg_1p4v: regulator-vddsoc {
208                 compatible = "regulator-fixed";
209                 regulator-name = "vdd_soc";
210                 regulator-min-microvolt = <1400000>;
211                 regulator-max-microvolt = <1400000>;
212                 regulator-always-on;
213         };
214 
215         reg_usb_h1_vbus: regulator-usb-h1-vbus {
216                 compatible = "regulator-fixed";
217                 regulator-name = "usb_h1_vbus";
218                 regulator-min-microvolt = <5000000>;
219                 regulator-max-microvolt = <5000000>;
220                 regulator-always-on;
221         };
222 
223         reg_usb_otg_vbus: regulator-usb-otg-vbus {
224                 compatible = "regulator-fixed";
225                 regulator-name = "usb_otg_vbus";
226                 regulator-min-microvolt = <5000000>;
227                 regulator-max-microvolt = <5000000>;
228                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
229                 enable-active-high;
230         };
231 
232         sound {
233                 compatible = "fsl,imx6q-ventana-sgtl5000",
234                              "fsl,imx-audio-sgtl5000";
235                 model = "sgtl5000-audio";
236                 ssi-controller = <&ssi1>;
237                 audio-codec = <&sgtl5000>;
238                 audio-routing =
239                         "MIC_IN", "Mic Jack",
240                         "Mic Jack", "Mic Bias",
241                         "Headphone Jack", "HP_OUT";
242                 mux-int-port = <1>;
243                 mux-ext-port = <4>;
244         };
245 };
246 
247 &audmux {
248         pinctrl-names = "default";
249         pinctrl-0 = <&pinctrl_audmux>;
250         status = "okay";
251 };
252 
253 &ecspi3 {
254         cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
255         pinctrl-names = "default";
256         pinctrl-0 = <&pinctrl_ecspi3>;
257         status = "okay";
258 };
259 
260 &can1 {
261         pinctrl-names = "default";
262         pinctrl-0 = <&pinctrl_flexcan>;
263         status = "okay";
264 };
265 
266 &clks {
267         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
268                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
269         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
270                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
271 };
272 
273 &fec {
274         pinctrl-names = "default";
275         pinctrl-0 = <&pinctrl_enet>;
276         phy-mode = "rgmii-id";
277         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
278         status = "okay";
279 };
280 
281 &hdmi {
282         ddc-i2c-bus = <&i2c3>;
283         status = "okay";
284 };
285 
286 &i2c1 {
287         clock-frequency = <100000>;
288         pinctrl-names = "default";
289         pinctrl-0 = <&pinctrl_i2c1>;
290         status = "okay";
291 
292         gsc: gsc@20 {
293                 compatible = "gw,gsc";
294                 reg = <0x20>;
295                 interrupt-parent = <&gpio1>;
296                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
297                 interrupt-controller;
298                 #interrupt-cells = <1>;
299                 #size-cells = <0>;
300 
301                 adc {
302                         compatible = "gw,gsc-adc";
303                         #address-cells = <1>;
304                         #size-cells = <0>;
305 
306                         channel@0 {
307                                 gw,mode = <0>;
308                                 reg = <0x00>;
309                                 label = "temp";
310                         };
311 
312                         channel@2 {
313                                 gw,mode = <1>;
314                                 reg = <0x02>;
315                                 label = "vdd_vin";
316                         };
317 
318                         channel@5 {
319                                 gw,mode = <1>;
320                                 reg = <0x05>;
321                                 label = "vdd_3p3";
322                         };
323 
324                         channel@8 {
325                                 gw,mode = <1>;
326                                 reg = <0x08>;
327                                 label = "vdd_bat";
328                         };
329 
330                         channel@b {
331                                 gw,mode = <1>;
332                                 reg = <0x0b>;
333                                 label = "vdd_5p0";
334                         };
335 
336                         channel@e {
337                                 gw,mode = <1>;
338                                 reg = <0xe>;
339                                 label = "vdd_arm";
340                         };
341 
342                         channel@11 {
343                                 gw,mode = <1>;
344                                 reg = <0x11>;
345                                 label = "vdd_soc";
346                         };
347 
348                         channel@14 {
349                                 gw,mode = <1>;
350                                 reg = <0x14>;
351                                 label = "vdd_3p0";
352                         };
353 
354                         channel@17 {
355                                 gw,mode = <1>;
356                                 reg = <0x17>;
357                                 label = "vdd_1p5";
358                         };
359 
360                         channel@1d {
361                                 gw,mode = <1>;
362                                 reg = <0x1d>;
363                                 label = "vdd_1p8";
364                         };
365 
366                         channel@20 {
367                                 gw,mode = <1>;
368                                 reg = <0x20>;
369                                 label = "vdd_an1";
370                         };
371 
372                         channel@23 {
373                                 gw,mode = <1>;
374                                 reg = <0x23>;
375                                 label = "vdd_2p5";
376                         };
377 
378                         channel@26 {
379                                 gw,mode = <1>;
380                                 reg = <0x26>;
381                                 label = "vdd_gps";
382                         };
383 
384                         channel@29 {
385                                 gw,mode = <1>;
386                                 reg = <0x29>;
387                                 label = "vdd_an2";
388                         };
389                 };
390         };
391 
392         gsc_gpio: gpio@23 {
393                 compatible = "nxp,pca9555";
394                 reg = <0x23>;
395                 gpio-controller;
396                 #gpio-cells = <2>;
397                 interrupt-parent = <&gsc>;
398                 interrupts = <4>;
399         };
400 
401         eeprom1: eeprom@50 {
402                 compatible = "atmel,24c02";
403                 reg = <0x50>;
404                 pagesize = <16>;
405         };
406 
407         eeprom2: eeprom@51 {
408                 compatible = "atmel,24c02";
409                 reg = <0x51>;
410                 pagesize = <16>;
411         };
412 
413         eeprom3: eeprom@52 {
414                 compatible = "atmel,24c02";
415                 reg = <0x52>;
416                 pagesize = <16>;
417         };
418 
419         eeprom4: eeprom@53 {
420                 compatible = "atmel,24c02";
421                 reg = <0x53>;
422                 pagesize = <16>;
423         };
424 
425         ds1672: rtc@68 {
426                 compatible = "dallas,ds1672";
427                 reg = <0x68>;
428         };
429 };
430 
431 &i2c2 {
432         clock-frequency = <100000>;
433         pinctrl-names = "default";
434         pinctrl-0 = <&pinctrl_i2c2>;
435         status = "okay";
436 
437         sgtl5000: codec@a {
438                 compatible = "fsl,sgtl5000";
439                 reg = <0x0a>;
440                 #sound-dai-cells = <0>;
441                 clocks = <&clks IMX6QDL_CLK_CKO>;
442                 VDDA-supply = <&reg_1p8v>;
443                 VDDIO-supply = <&reg_3p3v>;
444         };
445 
446         magn@1c {
447                 compatible = "st,lsm9ds1-magn";
448                 reg = <0x1c>;
449                 pinctrl-names = "default";
450                 pinctrl-0 = <&pinctrl_mag>;
451                 interrupt-parent = <&gpio5>;
452                 interrupts = <9 IRQ_TYPE_EDGE_RISING>;
453         };
454 
455         tca8418: keypad@34 {
456                 compatible = "ti,tca8418";
457                 pinctrl-names = "default";
458                 pinctrl-0 = <&pinctrl_keypad>;
459                 reg = <0x34>;
460                 interrupt-parent = <&gpio5>;
461                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
462                 linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
463                                  MATRIX_KEY(0x00, 0x00, BTN_1)
464                                  MATRIX_KEY(0x01, 0x01, BTN_2)
465                                  MATRIX_KEY(0x01, 0x00, BTN_3)
466                                  MATRIX_KEY(0x02, 0x00, BTN_4)
467                                  MATRIX_KEY(0x00, 0x03, BTN_5)
468                                  MATRIX_KEY(0x00, 0x02, BTN_6)
469                                  MATRIX_KEY(0x01, 0x03, BTN_7)
470                                  MATRIX_KEY(0x01, 0x02, BTN_8)
471                                  MATRIX_KEY(0x02, 0x02, BTN_9)
472                 >;
473                 keypad,num-rows = <4>;
474                 keypad,num-columns = <4>;
475         };
476 
477         ltc3676: pmic@3c {
478                 compatible = "lltc,ltc3676";
479                 pinctrl-names = "default";
480                 pinctrl-0 = <&pinctrl_pmic>;
481                 reg = <0x3c>;
482                 interrupt-parent = <&gpio1>;
483                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
484 
485                 regulators {
486                         /* VDD_DDR (1+R1/R2 = 2.105) */
487                         reg_vdd_ddr: sw2 {
488                                 regulator-name = "vddddr";
489                                 regulator-min-microvolt = <868310>;
490                                 regulator-max-microvolt = <1684000>;
491                                 lltc,fb-voltage-divider = <221000 200000>;
492                                 regulator-ramp-delay = <7000>;
493                                 regulator-boot-on;
494                                 regulator-always-on;
495                         };
496 
497                         /* VDD_ARM (1+R1/R2 = 1.931) */
498                         reg_vdd_arm: sw3 {
499                                 regulator-name = "vddarm";
500                                 regulator-min-microvolt = <796551>;
501                                 regulator-max-microvolt = <1544827>;
502                                 lltc,fb-voltage-divider = <243000 261000>;
503                                 regulator-ramp-delay = <7000>;
504                                 regulator-boot-on;
505                                 regulator-always-on;
506                                 linux,phandle = <&reg_vdd_arm>;
507                         };
508 
509                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
510                         reg_1p8v: sw4 {
511                                 regulator-name = "vdd1p8";
512                                 regulator-min-microvolt = <1033310>;
513                                 regulator-max-microvolt = <2004000>;
514                                 lltc,fb-voltage-divider = <301000 200000>;
515                                 regulator-ramp-delay = <7000>;
516                                 regulator-boot-on;
517                                 regulator-always-on;
518                         };
519 
520                         /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
521                         reg_1p0v: ldo2 {
522                                 regulator-name = "vdd1p0";
523                                 regulator-min-microvolt = <950000>;
524                                 regulator-max-microvolt = <1050000>;
525                                 lltc,fb-voltage-divider = <78700 200000>;
526                                 regulator-boot-on;
527                                 regulator-always-on;
528                         };
529 
530                         /* VDD_AUD_1P8: Audio codec */
531                         reg_aud_1p8v: ldo3 {
532                                 regulator-name = "vdd1p8a";
533                                 regulator-min-microvolt = <1800000>;
534                                 regulator-max-microvolt = <1800000>;
535                                 regulator-boot-on;
536                         };
537 
538                         /* VDD_HIGH (1+R1/R2 = 4.17) */
539                         reg_3p0v: ldo4 {
540                                 regulator-name = "vdd3p0";
541                                 regulator-min-microvolt = <3023250>;
542                                 regulator-max-microvolt = <3023250>;
543                                 lltc,fb-voltage-divider = <634000 200000>;
544                                 regulator-boot-on;
545                                 regulator-always-on;
546                         };
547                 };
548         };
549 
550         imu@6a {
551                 compatible = "st,lsm9ds1-imu";
552                 reg = <0x6a>;
553                 st,drdy-int-pin = <1>;
554                 pinctrl-names = "default";
555                 pinctrl-0 = <&pinctrl_imu>;
556                 interrupt-parent = <&gpio5>;
557                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
558         };
559 };
560 
561 &i2c3 {
562         clock-frequency = <100000>;
563         pinctrl-names = "default";
564         pinctrl-0 = <&pinctrl_i2c3>;
565         status = "okay";
566 
567         egalax_ts: touchscreen@4 {
568                 compatible = "eeti,egalax_ts";
569                 reg = <0x04>;
570                 interrupt-parent = <&gpio5>;
571                 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
572                 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
573         };
574 };
575 
576 &ldb {
577         fsl,dual-channel;
578         status = "okay";
579 
580         lvds-channel@0 {
581                 fsl,data-mapping = "spwg";
582                 fsl,data-width = <18>;
583                 status = "okay";
584 
585                 display-timings {
586                         native-mode = <&timing0>;
587                         timing0: timing-hsd100pxn1 {
588                                 clock-frequency = <65000000>;
589                                 hactive = <1024>;
590                                 vactive = <768>;
591                                 hback-porch = <220>;
592                                 hfront-porch = <40>;
593                                 vback-porch = <21>;
594                                 vfront-porch = <7>;
595                                 hsync-len = <60>;
596                                 vsync-len = <10>;
597                         };
598                 };
599         };
600 };
601 
602 &pcie {
603         pinctrl-names = "default";
604         pinctrl-0 = <&pinctrl_pcie>;
605         reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
606         status = "okay";
607 };
608 
609 &pwm2 {
610         pinctrl-names = "default";
611         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
612         status = "disabled";
613 };
614 
615 &pwm3 {
616         pinctrl-names = "default";
617         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
618         status = "disabled";
619 };
620 
621 &pwm4 {
622         pinctrl-names = "default";
623         pinctrl-0 = <&pinctrl_pwm4>;
624         status = "okay";
625 };
626 
627 &ssi1 {
628         status = "okay";
629 };
630 
631 &uart1 {
632         pinctrl-names = "default";
633         pinctrl-0 = <&pinctrl_uart1>;
634         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
635         status = "okay";
636 };
637 
638 &uart2 {
639         pinctrl-names = "default";
640         pinctrl-0 = <&pinctrl_uart2>;
641         status = "okay";
642 };
643 
644 &uart5 {
645         pinctrl-names = "default";
646         pinctrl-0 = <&pinctrl_uart5>;
647         status = "okay";
648 };
649 
650 &usbotg {
651         vbus-supply = <&reg_usb_otg_vbus>;
652         pinctrl-names = "default";
653         pinctrl-0 = <&pinctrl_usbotg>;
654         disable-over-current;
655         status = "okay";
656 };
657 
658 &usbh1 {
659         vbus-supply = <&reg_usb_h1_vbus>;
660         pinctrl-names = "default";
661         pinctrl-0 = <&pinctrl_usbh1>;
662         status = "okay";
663 };
664 
665 &usdhc2 {
666         pinctrl-names = "default";
667         pinctrl-0 = <&pinctrl_usdhc2>;
668         bus-width = <8>;
669         vmmc-supply = <&reg_3p3v>;
670         non-removable;
671         status = "okay";
672 };
673 
674 &usdhc3 {
675         pinctrl-names = "default", "state_100mhz", "state_200mhz";
676         pinctrl-0 = <&pinctrl_usdhc3>;
677         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
678         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
679         cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
680         vmmc-supply = <&reg_3p3v>;
681         status = "okay";
682 };
683 
684 &wdog1 {
685         pinctrl-names = "default";
686         pinctrl-0 = <&pinctrl_wdog>;
687         fsl,ext-reset-output;
688 };
689 
690 &iomuxc {
691         pinctrl_audmux: audmuxgrp {
692                 fsl,pins = <
693                         /* AUD4 */
694                         MX6QDL_PAD_DISP0_DAT20__AUD4_TXC        0x130b0
695                         MX6QDL_PAD_DISP0_DAT21__AUD4_TXD        0x110b0
696                         MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS       0x130b0
697                         MX6QDL_PAD_DISP0_DAT23__AUD4_RXD        0x130b0
698                         MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
699                         /* AUD6 */
700                         MX6QDL_PAD_DI0_PIN2__AUD6_TXD           0x130b0
701                         MX6QDL_PAD_DI0_PIN3__AUD6_TXFS          0x130b0
702                         MX6QDL_PAD_DI0_PIN4__AUD6_RXD           0x130b0
703                         MX6QDL_PAD_DI0_PIN15__AUD6_TXC          0x130b0
704                 >;
705         };
706 
707         pinctrl_ecspi3: escpi3grp {
708                 fsl,pins = <
709                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
710                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
711                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
712                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x100b1
713                 >;
714         };
715 
716         pinctrl_enet: enetgrp {
717                 fsl,pins = <
718                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
719                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
720                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
721                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
722                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
723                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
724                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
725                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
726                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
727                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
728                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
729                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
730                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
731                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
732                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
733                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
734                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x4001b0b0 /* PHY_RST# */
735                 >;
736         };
737 
738         pinctrl_flexcan: flexcangrp {
739                 fsl,pins = <
740                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
741                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
742                         MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
743                 >;
744         };
745 
746         pinctrl_gpio_leds: gpioledsgrp {
747                 fsl,pins = <
748                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
749                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
750                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
751                 >;
752         };
753 
754         pinctrl_i2c1: i2c1grp {
755                 fsl,pins = <
756                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
757                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
758                         MX6QDL_PAD_GPIO_4__GPIO1_IO04           0xb0b1
759                 >;
760         };
761 
762         pinctrl_i2c2: i2c2grp {
763                 fsl,pins = <
764                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
765                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
766                 >;
767         };
768 
769         pinctrl_i2c3: i2c3grp {
770                 fsl,pins = <
771                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
772                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
773                         MX6QDL_PAD_GPIO_19__GPIO4_IO05          0x4001b0b0 /* DIOI2C_DIS# */
774                         MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12      0x0001b0b0 /* LVDS_TOUCH_IRQ# */
775                         MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x0001b0b0 /* LVDS_BACKEN */
776                 >;
777         };
778 
779         pinctrl_imu: imugrp {
780                 fsl,pins = <
781                         MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06      0x1b0b0
782                 >;
783         };
784 
785         pinctrl_keypad: keypadgrp {
786                 fsl,pins = <
787                         MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11      0x0001b0b0 /* KEYPAD_IRQ# */
788                         MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30       0x0001b0b0 /* KEYPAD_LED_EN */
789                 >;
790         };
791 
792         pinctrl_mag: maggrp {
793                 fsl,pins = <
794                         MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09      0x1b0b0
795                 >;
796         };
797 
798         pinctrl_pcie: pciegrp {
799                 fsl,pins = <
800                         MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31      0x1b0b0    /* PCI_RST# */
801                         MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x4001b0b0 /* PCIESKT_WDIS# */
802                 >;
803         };
804 
805         pinctrl_pmic: pmicgrp {
806                 fsl,pins = <
807                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
808                 >;
809         };
810 
811         pinctrl_pps: ppsgrp {
812                 fsl,pins = <
813                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
814                 >;
815         };
816 
817         pinctrl_pwm2: pwm2grp {
818                 fsl,pins = <
819                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
820                 >;
821         };
822 
823         pinctrl_pwm3: pwm3grp {
824                 fsl,pins = <
825                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
826                 >;
827         };
828 
829         pinctrl_pwm4: pwm4grp {
830                 fsl,pins = <
831                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
832                 >;
833         };
834 
835         pinctrl_uart1: uart1grp {
836                 fsl,pins = <
837                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
838                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
839                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
840                 >;
841         };
842 
843         pinctrl_uart2: uart2grp {
844                 fsl,pins = <
845                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
846                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
847                 >;
848         };
849 
850         pinctrl_uart5: uart5grp {
851                 fsl,pins = <
852                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
853                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
854                 >;
855         };
856 
857         pinctrl_usbh1: usbh1grp {
858                 fsl,pins = <
859                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x4001b0b0 /* USBHUB_RST# */
860                 >;
861         };
862 
863         pinctrl_usbotg: usbotggrp {
864                 fsl,pins = <
865                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
866                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
867                         MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x1b0b0 /* OC */
868                 >;
869         };
870 
871         pinctrl_usdhc2: usdhc2grp {
872                 fsl,pins = <
873                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x170f9
874                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x100f9
875                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x170f9
876                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x170f9
877                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x170f9
878                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x170f9
879                         MX6QDL_PAD_NANDF_D4__SD2_DATA4          0x170f9
880                         MX6QDL_PAD_NANDF_D5__SD2_DATA5          0x170f9
881                         MX6QDL_PAD_NANDF_D6__SD2_DATA6          0x170f9
882                         MX6QDL_PAD_NANDF_D7__SD2_DATA7          0x170f9
883                 >;
884         };
885 
886         pinctrl_usdhc3: usdhc3grp {
887                 fsl,pins = <
888                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
889                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
890                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
891                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
892                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
893                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
894                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
895                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
896                 >;
897         };
898 
899         pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
900                 fsl,pins = <
901                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
902                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
903                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
904                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
905                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
906                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
907                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
908                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
909                 >;
910         };
911 
912         pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
913                 fsl,pins = <
914                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
915                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
916                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
917                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
918                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
919                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
920                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
921                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
922                 >;
923         };
924 
925         pinctrl_wdog: wdoggrp {
926                 fsl,pins = <
927                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
928                 >;
929         };
930 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php