1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2012 Freescale Semiconductor, Inc.
4 // Copyright 2011 Linaro Ltd.
5
6 #include <dt-bindings/clock/imx6qdl-clock.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9
10 / {
11 chosen {
12 stdout-path = &uart1;
13 };
14
15 memory@10000000 {
16 device_type = "memory";
17 reg = <0x10000000 0x40000000>;
18 };
19
20 reg_usb_otg_vbus: regulator-usb-otg-vbus {
21 compatible = "regulator-fixed";
22 regulator-name = "usb_otg_vbus";
23 regulator-min-microvolt = <5000000>;
24 regulator-max-microvolt = <5000000>;
25 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
26 enable-active-high;
27 vin-supply = <&swbst_reg>;
28 };
29
30 reg_usb_h1_vbus: regulator-usb-h1-vbus {
31 compatible = "regulator-fixed";
32 regulator-name = "usb_h1_vbus";
33 regulator-min-microvolt = <5000000>;
34 regulator-max-microvolt = <5000000>;
35 gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
36 enable-active-high;
37 vin-supply = <&swbst_reg>;
38 };
39
40 reg_audio: regulator-audio {
41 compatible = "regulator-fixed";
42 regulator-name = "wm8962-supply";
43 gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
44 enable-active-high;
45 };
46
47 reg_pcie: regulator-pcie {
48 compatible = "regulator-fixed";
49 pinctrl-names = "default";
50 pinctrl-0 = <&pinctrl_pcie_reg>;
51 regulator-name = "MPCIE_3V3";
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
54 gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
55 enable-active-high;
56 };
57
58 reg_sensors: regulator-sensors {
59 compatible = "regulator-fixed";
60 pinctrl-names = "default";
61 pinctrl-0 = <&pinctrl_sensors_reg>;
62 regulator-name = "sensors-supply";
63 regulator-min-microvolt = <3300000>;
64 regulator-max-microvolt = <3300000>;
65 gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
66 enable-active-high;
67 };
68
69 gpio-keys {
70 compatible = "gpio-keys";
71 pinctrl-names = "default";
72 pinctrl-0 = <&pinctrl_gpio_keys>;
73
74 power {
75 label = "Power Button";
76 gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
77 wakeup-source;
78 linux,code = <KEY_POWER>;
79 };
80
81 volume-up {
82 label = "Volume Up";
83 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
84 wakeup-source;
85 linux,code = <KEY_VOLUMEUP>;
86 };
87
88 volume-down {
89 label = "Volume Down";
90 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
91 wakeup-source;
92 linux,code = <KEY_VOLUMEDOWN>;
93 };
94 };
95
96 sound {
97 compatible = "fsl,imx6q-sabresd-wm8962",
98 "fsl,imx-audio-wm8962";
99 model = "wm8962-audio";
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_hp>;
102 ssi-controller = <&ssi2>;
103 audio-codec = <&codec>;
104 audio-asrc = <&asrc>;
105 audio-routing =
106 "Headphone Jack", "HPOUTL",
107 "Headphone Jack", "HPOUTR",
108 "Ext Spk", "SPKOUTL",
109 "Ext Spk", "SPKOUTR",
110 "AMIC", "MICBIAS",
111 "IN3R", "AMIC",
112 "DMIC", "MICBIAS",
113 "DMICDAT", "DMIC";
114 mux-int-port = <2>;
115 mux-ext-port = <3>;
116 hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
117 mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
118 };
119
120 backlight_lvds: backlight-lvds {
121 compatible = "pwm-backlight";
122 pwms = <&pwm1 0 5000000 0>;
123 brightness-levels = <0 4 8 16 32 64 128 255>;
124 default-brightness-level = <7>;
125 status = "okay";
126 };
127
128 leds {
129 compatible = "gpio-leds";
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_gpio_leds>;
132
133 led-red {
134 gpios = <&gpio1 2 0>;
135 default-state = "on";
136 };
137 };
138
139 panel {
140 compatible = "hannstar,hsd100pxn1";
141 backlight = <&backlight_lvds>;
142
143 port {
144 panel_in: endpoint {
145 remote-endpoint = <&lvds0_out>;
146 };
147 };
148 };
149 };
150
151 &ipu1_csi0_from_ipu1_csi0_mux {
152 bus-width = <8>;
153 data-shift = <12>; /* Lines 19:12 used */
154 hsync-active = <1>;
155 vsync-active = <1>;
156 };
157
158 &ipu1_csi0_mux_from_parallel_sensor {
159 remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
160 };
161
162 &ipu1_csi0 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&pinctrl_ipu1_csi0>;
165 };
166
167 &mipi_csi {
168 status = "okay";
169
170 port@0 {
171 reg = <0>;
172
173 mipi_csi2_in: endpoint {
174 remote-endpoint = <&ov5640_to_mipi_csi2>;
175 clock-lanes = <0>;
176 data-lanes = <1 2>;
177 };
178 };
179 };
180
181 &audmux {
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_audmux>;
184 status = "okay";
185 };
186
187 &clks {
188 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
189 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
190 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
191 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
192 };
193
194 &ecspi1 {
195 cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_ecspi1>;
198 status = "okay";
199
200 flash: flash@0 {
201 #address-cells = <1>;
202 #size-cells = <1>;
203 compatible = "st,m25p32", "jedec,spi-nor";
204 spi-max-frequency = <20000000>;
205 reg = <0>;
206 };
207 };
208
209 &fec {
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_enet>;
212 phy-mode = "rgmii-id";
213 phy-handle = <&phy>;
214 fsl,magic-packet;
215 status = "okay";
216
217 mdio {
218 #address-cells = <1>;
219 #size-cells = <0>;
220
221 phy: ethernet-phy@1 {
222 reg = <1>;
223 qca,clk-out-frequency = <125000000>;
224 reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
225 reset-assert-us = <10000>;
226 };
227 };
228 };
229
230 &hdmi {
231 pinctrl-names = "default";
232 pinctrl-0 = <&pinctrl_hdmi_cec>;
233 ddc-i2c-bus = <&i2c2>;
234 status = "okay";
235 };
236
237 &i2c1 {
238 clock-frequency = <100000>;
239 pinctrl-names = "default";
240 pinctrl-0 = <&pinctrl_i2c1>;
241 status = "okay";
242
243 codec: wm8962@1a {
244 compatible = "wlf,wm8962";
245 reg = <0x1a>;
246 clocks = <&clks IMX6QDL_CLK_CKO>;
247 DCVDD-supply = <®_audio>;
248 DBVDD-supply = <®_audio>;
249 AVDD-supply = <®_audio>;
250 CPVDD-supply = <®_audio>;
251 MICVDD-supply = <®_audio>;
252 PLLVDD-supply = <®_audio>;
253 SPKVDD1-supply = <®_audio>;
254 SPKVDD2-supply = <®_audio>;
255 gpio-cfg = <
256 0x0000 /* 0:Default */
257 0x0000 /* 1:Default */
258 0x0013 /* 2:FN_DMICCLK */
259 0x0000 /* 3:Default */
260 0x8014 /* 4:FN_DMICCDAT */
261 0x0000 /* 5:Default */
262 >;
263 };
264
265 accelerometer@1c {
266 compatible = "fsl,mma8451";
267 reg = <0x1c>;
268 pinctrl-names = "default";
269 pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
270 interrupt-parent = <&gpio1>;
271 interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
272 vdd-supply = <®_sensors>;
273 vddio-supply = <®_sensors>;
274 };
275
276 ov5642: camera@3c {
277 compatible = "ovti,ov5642";
278 pinctrl-names = "default";
279 pinctrl-0 = <&pinctrl_ov5642>;
280 clocks = <&clks IMX6QDL_CLK_CKO>;
281 clock-names = "xclk";
282 reg = <0x3c>;
283 DOVDD-supply = <&vgen4_reg>; /* 1.8v */
284 AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3
285 rev B board is VGEN5 */
286 DVDD-supply = <&vgen2_reg>; /* 1.5v*/
287 powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
288 reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
289 status = "disabled";
290
291 port {
292 ov5642_to_ipu1_csi0_mux: endpoint {
293 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
294 bus-width = <8>;
295 hsync-active = <1>;
296 vsync-active = <1>;
297 };
298 };
299 };
300 };
301
302 &i2c2 {
303 clock-frequency = <100000>;
304 pinctrl-names = "default";
305 pinctrl-0 = <&pinctrl_i2c2>;
306 status = "okay";
307
308 touchscreen@4 {
309 compatible = "eeti,egalax_ts";
310 reg = <0x04>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
313 interrupt-parent = <&gpio6>;
314 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
315 wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
316 };
317
318 ov5640: camera@3c {
319 compatible = "ovti,ov5640";
320 pinctrl-names = "default";
321 pinctrl-0 = <&pinctrl_ov5640>;
322 reg = <0x3c>;
323 clocks = <&clks IMX6QDL_CLK_CKO>;
324 clock-names = "xclk";
325 DOVDD-supply = <&vgen4_reg>; /* 1.8v */
326 AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3
327 rev B board is VGEN5 */
328 DVDD-supply = <&vgen2_reg>; /* 1.5v*/
329 powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
330 reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
331
332 port {
333 ov5640_to_mipi_csi2: endpoint {
334 remote-endpoint = <&mipi_csi2_in>;
335 clock-lanes = <0>;
336 data-lanes = <1 2>;
337 };
338 };
339 };
340
341 pmic: pmic@8 {
342 compatible = "fsl,pfuze100";
343 reg = <0x08>;
344
345 regulators {
346 sw1a_reg: sw1ab {
347 regulator-min-microvolt = <300000>;
348 regulator-max-microvolt = <1875000>;
349 regulator-boot-on;
350 regulator-always-on;
351 regulator-ramp-delay = <6250>;
352 };
353
354 sw1c_reg: sw1c {
355 regulator-min-microvolt = <300000>;
356 regulator-max-microvolt = <1875000>;
357 regulator-boot-on;
358 regulator-always-on;
359 regulator-ramp-delay = <6250>;
360 };
361
362 sw2_reg: sw2 {
363 regulator-min-microvolt = <800000>;
364 regulator-max-microvolt = <3300000>;
365 regulator-boot-on;
366 regulator-always-on;
367 regulator-ramp-delay = <6250>;
368 };
369
370 sw3a_reg: sw3a {
371 regulator-min-microvolt = <400000>;
372 regulator-max-microvolt = <1975000>;
373 regulator-boot-on;
374 regulator-always-on;
375 };
376
377 sw3b_reg: sw3b {
378 regulator-min-microvolt = <400000>;
379 regulator-max-microvolt = <1975000>;
380 regulator-boot-on;
381 regulator-always-on;
382 };
383
384 sw4_reg: sw4 {
385 regulator-min-microvolt = <800000>;
386 regulator-max-microvolt = <3300000>;
387 regulator-always-on;
388 };
389
390 swbst_reg: swbst {
391 regulator-min-microvolt = <5000000>;
392 regulator-max-microvolt = <5150000>;
393 };
394
395 snvs_reg: vsnvs {
396 regulator-min-microvolt = <1000000>;
397 regulator-max-microvolt = <3000000>;
398 regulator-boot-on;
399 regulator-always-on;
400 };
401
402 vref_reg: vrefddr {
403 regulator-boot-on;
404 regulator-always-on;
405 };
406
407 vgen1_reg: vgen1 {
408 regulator-min-microvolt = <800000>;
409 regulator-max-microvolt = <1550000>;
410 };
411
412 vgen2_reg: vgen2 {
413 regulator-min-microvolt = <800000>;
414 regulator-max-microvolt = <1550000>;
415 };
416
417 vgen3_reg: vgen3 {
418 regulator-min-microvolt = <1800000>;
419 regulator-max-microvolt = <3300000>;
420 };
421
422 vgen4_reg: vgen4 {
423 regulator-min-microvolt = <1800000>;
424 regulator-max-microvolt = <3300000>;
425 regulator-always-on;
426 };
427
428 vgen5_reg: vgen5 {
429 regulator-min-microvolt = <1800000>;
430 regulator-max-microvolt = <3300000>;
431 regulator-always-on;
432 };
433
434 vgen6_reg: vgen6 {
435 regulator-min-microvolt = <1800000>;
436 regulator-max-microvolt = <3300000>;
437 regulator-always-on;
438 };
439 };
440 };
441 };
442
443 &i2c3 {
444 clock-frequency = <100000>;
445 pinctrl-names = "default";
446 pinctrl-0 = <&pinctrl_i2c3>;
447 status = "okay";
448
449 egalax_ts@4 {
450 compatible = "eeti,egalax_ts";
451 reg = <0x04>;
452 interrupt-parent = <&gpio6>;
453 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
454 wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
455 };
456
457 magnetometer@e {
458 compatible = "fsl,mag3110";
459 reg = <0x0e>;
460 pinctrl-names = "default";
461 pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
462 interrupt-parent = <&gpio3>;
463 interrupts = <16 IRQ_TYPE_EDGE_RISING>;
464 vdd-supply = <®_sensors>;
465 vddio-supply = <®_sensors>;
466 };
467
468 light-sensor@44 {
469 compatible = "isil,isl29023";
470 reg = <0x44>;
471 pinctrl-names = "default";
472 pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
473 interrupt-parent = <&gpio3>;
474 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
475 vcc-supply = <®_sensors>;
476 };
477 };
478
479 &iomuxc {
480 pinctrl-names = "default";
481 pinctrl-0 = <&pinctrl_hog>;
482
483 imx6qdl-sabresd {
484 pinctrl_hog: hoggrp {
485 fsl,pins = <
486 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
487 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
488 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
489 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
490 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
491 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
492 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
493 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
494 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
495 >;
496 };
497
498 pinctrl_audmux: audmuxgrp {
499 fsl,pins = <
500 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
501 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
502 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
503 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
504 >;
505 };
506
507 pinctrl_ecspi1: ecspi1grp {
508 fsl,pins = <
509 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
510 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
511 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
512 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
513 >;
514 };
515
516 pinctrl_enet: enetgrp {
517 fsl,pins = <
518 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
519 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
520 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
521 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
522 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
523 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
524 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
525 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
526 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
527 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
528 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
529 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
530 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
531 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
532 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
533 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
534 >;
535 };
536
537 pinctrl_gpio_keys: gpio_keysgrp {
538 fsl,pins = <
539 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
540 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
541 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
542 >;
543 };
544
545 pinctrl_hdmi_cec: hdmicecgrp {
546 fsl,pins = <
547 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
548 >;
549 };
550
551 pinctrl_hp: hpgrp {
552 fsl,pins = <
553 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
554 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
555 >;
556 };
557
558 pinctrl_i2c1: i2c1grp {
559 fsl,pins = <
560 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
561 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
562 >;
563 };
564
565 pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
566 fsl,pins = <
567 MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1
568 >;
569 };
570
571 pinctrl_i2c2: i2c2grp {
572 fsl,pins = <
573 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
574 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
575 >;
576 };
577
578 pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
579 fsl,pins = <
580 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0
581 >;
582 };
583
584 pinctrl_i2c3: i2c3grp {
585 fsl,pins = <
586 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
587 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
588 >;
589 };
590
591 pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
592 fsl,pins = <
593 MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1
594 >;
595 };
596
597 pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
598 fsl,pins = <
599 MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1
600 >;
601 };
602
603 pinctrl_ipu1_csi0: ipu1csi0grp {
604 fsl,pins = <
605 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
606 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
607 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
608 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
609 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
610 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
611 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
612 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
613 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
614 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
615 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
616 >;
617 };
618
619 pinctrl_ov5640: ov5640grp {
620 fsl,pins = <
621 MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
622 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0
623 >;
624 };
625
626 pinctrl_ov5642: ov5642grp {
627 fsl,pins = <
628 MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
629 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
630 >;
631 };
632
633 pinctrl_pcie: pciegrp {
634 fsl,pins = <
635 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
636 >;
637 };
638
639 pinctrl_pcie_reg: pciereggrp {
640 fsl,pins = <
641 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0
642 >;
643 };
644
645 pinctrl_pwm1: pwm1grp {
646 fsl,pins = <
647 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
648 >;
649 };
650
651 pinctrl_sensors_reg: sensorsreggrp {
652 fsl,pins = <
653 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0
654 >;
655 };
656
657 pinctrl_uart1: uart1grp {
658 fsl,pins = <
659 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
660 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
661 >;
662 };
663
664 pinctrl_usbotg: usbotggrp {
665 fsl,pins = <
666 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
667 >;
668 };
669
670 pinctrl_usdhc2: usdhc2grp {
671 fsl,pins = <
672 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
673 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
674 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
675 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
676 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
677 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
678 MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
679 MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
680 MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
681 MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
682 >;
683 };
684
685 pinctrl_usdhc3: usdhc3grp {
686 fsl,pins = <
687 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
688 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
689 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
690 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
691 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
692 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
693 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
694 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
695 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
696 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
697 >;
698 };
699
700 pinctrl_usdhc4: usdhc4grp {
701 fsl,pins = <
702 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
703 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
704 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
705 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
706 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
707 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
708 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
709 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
710 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
711 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
712 >;
713 };
714
715 pinctrl_wdog: wdoggrp {
716 fsl,pins = <
717 MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0
718 >;
719 };
720 };
721
722 gpio_leds {
723 pinctrl_gpio_leds: gpioledsgrp {
724 fsl,pins = <
725 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
726 >;
727 };
728 };
729 };
730
731 &ldb {
732 status = "okay";
733
734 lvds-channel@1 {
735 fsl,data-mapping = "spwg";
736 fsl,data-width = <18>;
737 status = "okay";
738
739 port@4 {
740 reg = <4>;
741
742 lvds0_out: endpoint {
743 remote-endpoint = <&panel_in>;
744 };
745 };
746 };
747 };
748
749 &pcie {
750 pinctrl-names = "default";
751 pinctrl-0 = <&pinctrl_pcie>;
752 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
753 vpcie-supply = <®_pcie>;
754 status = "okay";
755 };
756
757 &pwm1 {
758 pinctrl-names = "default";
759 pinctrl-0 = <&pinctrl_pwm1>;
760 status = "okay";
761 };
762
763 ®_arm {
764 vin-supply = <&sw1a_reg>;
765 };
766
767 ®_pu {
768 vin-supply = <&sw1c_reg>;
769 };
770
771 ®_soc {
772 vin-supply = <&sw1c_reg>;
773 };
774
775 ®_vdd1p1 {
776 vin-supply = <&vgen5_reg>;
777 };
778
779 ®_vdd2p5 {
780 vin-supply = <&vgen5_reg>;
781 };
782
783 &snvs_poweroff {
784 status = "okay";
785 };
786
787 &snvs_pwrkey {
788 status = "okay";
789 };
790
791 &ssi2 {
792 status = "okay";
793 };
794
795 &uart1 {
796 pinctrl-names = "default";
797 pinctrl-0 = <&pinctrl_uart1>;
798 status = "okay";
799 };
800
801 &usbh1 {
802 vbus-supply = <®_usb_h1_vbus>;
803 status = "okay";
804 };
805
806 &usbotg {
807 vbus-supply = <®_usb_otg_vbus>;
808 pinctrl-names = "default";
809 pinctrl-0 = <&pinctrl_usbotg>;
810 disable-over-current;
811 status = "okay";
812 };
813
814 &usdhc2 {
815 pinctrl-names = "default";
816 pinctrl-0 = <&pinctrl_usdhc2>;
817 bus-width = <8>;
818 cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
819 wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
820 status = "okay";
821 };
822
823 &usdhc3 {
824 pinctrl-names = "default";
825 pinctrl-0 = <&pinctrl_usdhc3>;
826 bus-width = <8>;
827 cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
828 wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
829 status = "okay";
830 };
831
832 &usdhc4 {
833 pinctrl-names = "default";
834 pinctrl-0 = <&pinctrl_usdhc4>;
835 bus-width = <8>;
836 non-removable;
837 no-1-8-v;
838 status = "okay";
839 };
840
841 &wdog1 {
842 status = "disabled";
843 };
844
845 &wdog2 {
846 pinctrl-names = "default";
847 pinctrl-0 = <&pinctrl_wdog>;
848 fsl,ext-reset-output;
849 status = "okay";
850 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.