~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm/nxp/imx/imx6sll-evk.dts

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
  2 /*
  3  * Copyright 2016 Freescale Semiconductor, Inc.
  4  * Copyright 2017-2018 NXP.
  5  *
  6  */
  7 
  8 /dts-v1/;
  9 
 10 #include <dt-bindings/gpio/gpio.h>
 11 #include <dt-bindings/input/input.h>
 12 #include "imx6sll.dtsi"
 13 
 14 / {
 15         model = "Freescale i.MX6SLL EVK Board";
 16         compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
 17 
 18         chosen {
 19                 stdout-path = &uart1;
 20         };
 21 
 22         memory@80000000 {
 23                 device_type = "memory";
 24                 reg = <0x80000000 0x80000000>;
 25         };
 26 
 27         backlight_display: backlight-display {
 28                 compatible = "pwm-backlight";
 29                 pwms = <&pwm1 0 5000000 0>;
 30                 brightness-levels = <0 4 8 16 32 64 128 255>;
 31                 default-brightness-level = <6>;
 32                 status = "okay";
 33         };
 34 
 35         leds {
 36                 compatible = "gpio-leds";
 37                 pinctrl-names = "default";
 38                 pinctrl-0 = <&pinctrl_led>;
 39 
 40                 led-user {
 41                         label = "debug";
 42                         gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
 43                         linux,default-trigger = "heartbeat";
 44                 };
 45         };
 46 
 47         reg_usb_otg1_vbus: regulator-otg1-vbus {
 48                 compatible = "regulator-fixed";
 49                 pinctrl-names = "default";
 50                 pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
 51                 regulator-name = "usb_otg1_vbus";
 52                 regulator-min-microvolt = <5000000>;
 53                 regulator-max-microvolt = <5000000>;
 54                 gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
 55                 enable-active-high;
 56         };
 57 
 58         reg_usb_otg2_vbus: regulator-otg2-vbus {
 59                 compatible = "regulator-fixed";
 60                 pinctrl-names = "default";
 61                 pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
 62                 regulator-name = "usb_otg2_vbus";
 63                 regulator-min-microvolt = <5000000>;
 64                 regulator-max-microvolt = <5000000>;
 65                 gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
 66                 enable-active-high;
 67         };
 68 
 69         reg_aud3v: regulator-aud3v {
 70                 compatible = "regulator-fixed";
 71                 regulator-name = "wm8962-supply-3v15";
 72                 regulator-min-microvolt = <3150000>;
 73                 regulator-max-microvolt = <3150000>;
 74                 regulator-boot-on;
 75         };
 76 
 77         reg_aud4v: regulator-aud4v {
 78                 compatible = "regulator-fixed";
 79                 regulator-name = "wm8962-supply-4v2";
 80                 regulator-min-microvolt = <4325000>;
 81                 regulator-max-microvolt = <4325000>;
 82                 regulator-boot-on;
 83         };
 84 
 85         reg_lcd_3v3: regulator-lcd-3v3 {
 86                 compatible = "regulator-fixed";
 87                 pinctrl-names = "default";
 88                 pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
 89                 regulator-name = "lcd-3v3";
 90                 gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 91                 enable-active-high;
 92         };
 93 
 94         reg_lcd_5v: regulator-lcd-5v {
 95                 compatible = "regulator-fixed";
 96                 regulator-name = "lcd-5v0";
 97                 regulator-min-microvolt = <5000000>;
 98                 regulator-max-microvolt = <5000000>;
 99         };
100 
101         reg_sd1_vmmc: regulator-sd1-vmmc {
102                 compatible = "regulator-fixed";
103                 pinctrl-names = "default";
104                 pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
105                 regulator-name = "SD1_SPWR";
106                 regulator-min-microvolt = <3000000>;
107                 regulator-max-microvolt = <3000000>;
108                 gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
109                 enable-active-high;
110         };
111 
112         reg_sd2_vmmc: regulator-sd2-vmmc {
113                 compatible = "regulator-fixed";
114                 regulator-name = "eMMC-VCCQ";
115                 regulator-min-microvolt = <1800000>;
116                 regulator-max-microvolt = <1800000>;
117                 regulator-boot-on;
118         };
119 
120         reg_sd3_vmmc: regulator-sd3-vmmc {
121                 compatible = "regulator-fixed";
122                 pinctrl-names = "default";
123                 pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
124                 regulator-name = "SD3_WIFI";
125                 regulator-min-microvolt = <3000000>;
126                 regulator-max-microvolt = <3000000>;
127                 gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
128                 enable-active-high;
129         };
130 
131         panel {
132                 compatible = "sii,43wvf1g";
133                 backlight = <&backlight_display>;
134                 dvdd-supply = <&reg_lcd_3v3>;
135                 avdd-supply = <&reg_lcd_5v>;
136 
137                 port {
138                         panel_in: endpoint {
139                                 remote-endpoint = <&display_out>;
140                         };
141                 };
142         };
143 
144         sound {
145                 compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
146                 pinctrl-names = "default";
147                 pinctrl-0 = <&pinctrl_hp>;
148                 model = "wm8962-audio";
149                 audio-cpu = <&ssi2>;
150                 audio-codec = <&wm8962>;
151                 audio-routing =
152                         "Headphone Jack", "HPOUTL",
153                         "Headphone Jack", "HPOUTR",
154                         "Ext Spk", "SPKOUTL",
155                         "Ext Spk", "SPKOUTR",
156                         "AMIC", "MICBIAS",
157                         "IN3R", "AMIC";
158                 mux-int-port = <2>;
159                 mux-ext-port = <3>;
160                 hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
161         };
162 };
163 
164 &audmux {
165         pinctrl-names = "default";
166         pinctrl-0 = <&pinctrl_audmux3>;
167         status = "okay";
168 };
169 
170 &cpu0 {
171         arm-supply = <&sw1a_reg>;
172         soc-supply = <&sw1c_reg>;
173 };
174 
175 &i2c1 {
176         clock-frequency = <100000>;
177         pinctrl-names = "default";
178         pinctrl-0 = <&pinctrl_i2c1>;
179         status = "okay";
180 
181         pfuze100: pmic@8 {
182                 compatible = "fsl,pfuze100";
183                 reg = <0x08>;
184 
185                 regulators {
186                         sw1a_reg: sw1ab {
187                                 regulator-min-microvolt = <300000>;
188                                 regulator-max-microvolt = <1875000>;
189                                 regulator-boot-on;
190                                 regulator-always-on;
191                                 regulator-ramp-delay = <6250>;
192                         };
193 
194                         sw1c_reg: sw1c {
195                                 regulator-min-microvolt = <300000>;
196                                 regulator-max-microvolt = <1875000>;
197                                 regulator-boot-on;
198                                 regulator-always-on;
199                                 regulator-ramp-delay = <6250>;
200                         };
201 
202                         sw2_reg: sw2 {
203                                 regulator-min-microvolt = <800000>;
204                                 regulator-max-microvolt = <3300000>;
205                                 regulator-boot-on;
206                                 regulator-always-on;
207                         };
208 
209                         sw3a_reg: sw3a {
210                                 regulator-min-microvolt = <400000>;
211                                 regulator-max-microvolt = <1975000>;
212                                 regulator-boot-on;
213                                 regulator-always-on;
214                         };
215 
216                         sw3b_reg: sw3b {
217                                 regulator-min-microvolt = <400000>;
218                                 regulator-max-microvolt = <1975000>;
219                                 regulator-boot-on;
220                                 regulator-always-on;
221                         };
222 
223                         sw4_reg: sw4 {
224                                 regulator-min-microvolt = <800000>;
225                                 regulator-max-microvolt = <3300000>;
226                                 regulator-always-on;
227                         };
228 
229                         swbst_reg: swbst {
230                                 regulator-min-microvolt = <5000000>;
231                                 regulator-max-microvolt = <5150000>;
232                         };
233 
234                         snvs_reg: vsnvs {
235                                 regulator-min-microvolt = <1000000>;
236                                 regulator-max-microvolt = <3000000>;
237                                 regulator-boot-on;
238                                 regulator-always-on;
239                         };
240 
241                         vref_reg: vrefddr {
242                                 regulator-boot-on;
243                                 regulator-always-on;
244                         };
245 
246                         vgen1_reg: vgen1 {
247                                 regulator-min-microvolt = <800000>;
248                                 regulator-max-microvolt = <1550000>;
249                                 regulator-always-on;
250                         };
251 
252                         vgen2_reg: vgen2 {
253                                 regulator-min-microvolt = <800000>;
254                                 regulator-max-microvolt = <1550000>;
255                         };
256 
257                         vgen3_reg: vgen3 {
258                                 regulator-min-microvolt = <1800000>;
259                                 regulator-max-microvolt = <3300000>;
260                         };
261 
262                         vgen4_reg: vgen4 {
263                                 regulator-min-microvolt = <1800000>;
264                                 regulator-max-microvolt = <3300000>;
265                                 regulator-always-on;
266                         };
267 
268                         vgen5_reg: vgen5 {
269                                 regulator-min-microvolt = <1800000>;
270                                 regulator-max-microvolt = <3300000>;
271                                 regulator-always-on;
272                         };
273 
274                         vgen6_reg: vgen6 {
275                                 regulator-min-microvolt = <1800000>;
276                                 regulator-max-microvolt = <3300000>;
277                                 regulator-always-on;
278                         };
279                 };
280         };
281 };
282 
283 &i2c3 {
284         clock-frequency = <100000>;
285         pinctrl-names = "default";
286         pinctrl-0 = <&pinctrl_i2c3>;
287         status = "okay";
288 
289         wm8962: audio-codec@1a {
290                 compatible = "wlf,wm8962";
291                 reg = <0x1a>;
292                 clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
293                 DCVDD-supply = <&vgen3_reg>;
294                 DBVDD-supply = <&reg_aud3v>;
295                 AVDD-supply = <&vgen3_reg>;
296                 CPVDD-supply = <&vgen3_reg>;
297                 MICVDD-supply = <&reg_aud3v>;
298                 PLLVDD-supply = <&vgen3_reg>;
299                 SPKVDD1-supply = <&reg_aud4v>;
300                 SPKVDD2-supply = <&reg_aud4v>;
301         };
302 };
303 
304 &lcdif {
305         pinctrl-names = "default";
306         pinctrl-0 = <&pinctrl_lcd>;
307         status = "okay";
308 
309         port {
310                 display_out: endpoint {
311                         remote-endpoint = <&panel_in>;
312                 };
313         };
314 };
315 
316 &pwm1 {
317         pinctrl-names = "default";
318         pinctrl-0 = <&pinctrl_pwm1>;
319 };
320 
321 &snvs_poweroff {
322         status = "okay";
323 };
324 
325 &snvs_pwrkey {
326         status = "okay";
327 };
328 
329 &ssi2 {
330         status = "okay";
331 };
332 
333 &uart1 {
334         pinctrl-names = "default";
335         pinctrl-0 = <&pinctrl_uart1>;
336         status = "okay";
337 };
338 
339 &usdhc1 {
340         pinctrl-names = "default", "state_100mhz", "state_200mhz";
341         pinctrl-0 = <&pinctrl_usdhc1>;
342         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
343         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
344         cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
345         wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
346         keep-power-in-suspend;
347         wakeup-source;
348         vmmc-supply = <&reg_sd1_vmmc>;
349         status = "okay";
350 };
351 
352 &usdhc2 {
353         pinctrl-names = "default", "state_100mhz", "state_200mhz";
354         pinctrl-0 = <&pinctrl_usdhc2>;
355         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
356         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
357         bus-width = <8>;
358         non-removable;
359         vqmmc-supply = <&reg_sd2_vmmc>;
360         status = "okay";
361 };
362 
363 &usbotg1 {
364         vbus-supply = <&reg_usb_otg1_vbus>;
365         pinctrl-names = "default";
366         pinctrl-0 = <&pinctrl_usbotg1>;
367         disable-over-current;
368         srp-disable;
369         hnp-disable;
370         adp-disable;
371         status = "okay";
372 };
373 
374 &usbotg2 {
375         vbus-supply = <&reg_usb_otg2_vbus>;
376         dr_mode = "host";
377         disable-over-current;
378         status = "okay";
379 };
380 
381 &usdhc3 {
382         pinctrl-names = "default", "state_100mhz", "state_200mhz";
383         pinctrl-0 = <&pinctrl_usdhc3>;
384         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
385         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
386         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
387         keep-power-in-suspend;
388         wakeup-source;
389         vmmc-supply = <&reg_sd3_vmmc>;
390         status = "okay";
391 };
392 
393 &wdog1 {
394         pinctrl-names = "default";
395         pinctrl-0 = <&pinctrl_wdog1>;
396         fsl,ext-reset-output;
397 };
398 
399 &iomuxc {
400         pinctrl_audmux3: audmux3grp {
401                 fsl,pins = <
402                         MX6SLL_PAD_AUD_TXC__AUD3_TXC            0x4130b0
403                         MX6SLL_PAD_AUD_TXFS__AUD3_TXFS          0x4130b0
404                         MX6SLL_PAD_AUD_TXD__AUD3_TXD            0x4110b0
405                         MX6SLL_PAD_AUD_RXD__AUD3_RXD            0x4130b0
406                         MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT      0x4130b0
407                 >;
408         };
409 
410         pinctrl_hp: hpgrp {
411                 fsl,pins = <
412                         MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
413                 >;
414         };
415 
416         pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
417                 fsl,pins = <
418                         MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
419                 >;
420         };
421 
422         pinctrl_usb_otg1_vbus: vbus1grp {
423                 fsl,pins = <
424                         MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
425                 >;
426         };
427 
428         pinctrl_usb_otg2_vbus: vbus2grp {
429                 fsl,pins = <
430                         MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
431                 >;
432         };
433 
434         pinctrl_reg_lcd_3v3: reglcd3v3grp {
435                 fsl,pins = <
436                         MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
437                 >;
438         };
439 
440         pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
441                 fsl,pins = <
442                         MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
443                 >;
444         };
445 
446         pinctrl_uart1: uart1grp {
447                 fsl,pins = <
448                         MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
449                         MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
450                 >;
451         };
452 
453         pinctrl_usdhc1: usdhc1grp {
454                 fsl,pins = <
455                         MX6SLL_PAD_SD1_CMD__SD1_CMD     0x17059
456                         MX6SLL_PAD_SD1_CLK__SD1_CLK     0x13059
457                         MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
458                         MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
459                         MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
460                         MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
461                 >;
462         };
463 
464         pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
465                 fsl,pins = <
466                         MX6SLL_PAD_SD1_CMD__SD1_CMD     0x170b9
467                         MX6SLL_PAD_SD1_CLK__SD1_CLK     0x130b9
468                         MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
469                         MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
470                         MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
471                         MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
472                 >;
473         };
474 
475         pinctrl_usdhc1_200mhz: usdhc1grp-200mhz {
476                 fsl,pins = <
477                         MX6SLL_PAD_SD1_CMD__SD1_CMD     0x170f9
478                         MX6SLL_PAD_SD1_CLK__SD1_CLK     0x130f9
479                         MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
480                         MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
481                         MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
482                         MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
483                 >;
484         };
485 
486         pinctrl_usdhc2: usdhc2grp {
487                 fsl,pins = <
488                         MX6SLL_PAD_SD2_CMD__SD2_CMD             0x17059
489                         MX6SLL_PAD_SD2_CLK__SD2_CLK             0x13059
490                         MX6SLL_PAD_SD2_DATA0__SD2_DATA0         0x17059
491                         MX6SLL_PAD_SD2_DATA1__SD2_DATA1         0x17059
492                         MX6SLL_PAD_SD2_DATA2__SD2_DATA2         0x17059
493                         MX6SLL_PAD_SD2_DATA3__SD2_DATA3         0x17059
494                         MX6SLL_PAD_SD2_DATA4__SD2_DATA4         0x17059
495                         MX6SLL_PAD_SD2_DATA5__SD2_DATA5         0x17059
496                         MX6SLL_PAD_SD2_DATA6__SD2_DATA6         0x17059
497                         MX6SLL_PAD_SD2_DATA7__SD2_DATA7         0x17059
498                         MX6SLL_PAD_GPIO4_IO21__SD2_STROBE       0x13059
499                 >;
500         };
501 
502         pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
503                 fsl,pins = <
504                         MX6SLL_PAD_SD2_CMD__SD2_CMD             0x170b9
505                         MX6SLL_PAD_SD2_CLK__SD2_CLK             0x130b9
506                         MX6SLL_PAD_SD2_DATA0__SD2_DATA0         0x170b9
507                         MX6SLL_PAD_SD2_DATA1__SD2_DATA1         0x170b9
508                         MX6SLL_PAD_SD2_DATA2__SD2_DATA2         0x170b9
509                         MX6SLL_PAD_SD2_DATA3__SD2_DATA3         0x170b9
510                         MX6SLL_PAD_SD2_DATA4__SD2_DATA4         0x170b9
511                         MX6SLL_PAD_SD2_DATA5__SD2_DATA5         0x170b9
512                         MX6SLL_PAD_SD2_DATA6__SD2_DATA6         0x170b9
513                         MX6SLL_PAD_SD2_DATA7__SD2_DATA7         0x170b9
514                         MX6SLL_PAD_GPIO4_IO21__SD2_STROBE       0x130b9
515                 >;
516         };
517 
518         pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
519                 fsl,pins = <
520                         MX6SLL_PAD_SD2_CMD__SD2_CMD             0x170f9
521                         MX6SLL_PAD_SD2_CLK__SD2_CLK             0x130f9
522                         MX6SLL_PAD_SD2_DATA0__SD2_DATA0         0x170f9
523                         MX6SLL_PAD_SD2_DATA1__SD2_DATA1         0x170f9
524                         MX6SLL_PAD_SD2_DATA2__SD2_DATA2         0x170f9
525                         MX6SLL_PAD_SD2_DATA3__SD2_DATA3         0x170f9
526                         MX6SLL_PAD_SD2_DATA4__SD2_DATA4         0x170f9
527                         MX6SLL_PAD_SD2_DATA5__SD2_DATA5         0x170f9
528                         MX6SLL_PAD_SD2_DATA6__SD2_DATA6         0x170f9
529                         MX6SLL_PAD_SD2_DATA7__SD2_DATA7         0x170f9
530                         MX6SLL_PAD_GPIO4_IO21__SD2_STROBE       0x130f9
531                 >;
532         };
533 
534         pinctrl_usbotg1: usbotg1grp {
535                 fsl,pins = <
536                         MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
537                 >;
538         };
539 
540         pinctrl_usdhc3: usdhc3grp {
541                 fsl,pins = <
542                         MX6SLL_PAD_SD3_CMD__SD3_CMD             0x17061
543                         MX6SLL_PAD_SD3_CLK__SD3_CLK             0x13061
544                         MX6SLL_PAD_SD3_DATA0__SD3_DATA0         0x17061
545                         MX6SLL_PAD_SD3_DATA1__SD3_DATA1         0x17061
546                         MX6SLL_PAD_SD3_DATA2__SD3_DATA2         0x17061
547                         MX6SLL_PAD_SD3_DATA3__SD3_DATA3         0x17061
548                         MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22      0x17059
549                 >;
550         };
551 
552         pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
553                 fsl,pins = <
554                         MX6SLL_PAD_SD3_CMD__SD3_CMD             0x170a1
555                         MX6SLL_PAD_SD3_CLK__SD3_CLK             0x130a1
556                         MX6SLL_PAD_SD3_DATA0__SD3_DATA0         0x170a1
557                         MX6SLL_PAD_SD3_DATA1__SD3_DATA1         0x170a1
558                         MX6SLL_PAD_SD3_DATA2__SD3_DATA2         0x170a1
559                         MX6SLL_PAD_SD3_DATA3__SD3_DATA3         0x170a1
560                         MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22      0x17059
561                 >;
562         };
563 
564         pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
565                 fsl,pins = <
566                         MX6SLL_PAD_SD3_CMD__SD3_CMD             0x170e9
567                         MX6SLL_PAD_SD3_CLK__SD3_CLK             0x130f9
568                         MX6SLL_PAD_SD3_DATA0__SD3_DATA0         0x170e9
569                         MX6SLL_PAD_SD3_DATA1__SD3_DATA1         0x170e9
570                         MX6SLL_PAD_SD3_DATA2__SD3_DATA2         0x170e9
571                         MX6SLL_PAD_SD3_DATA3__SD3_DATA3         0x170e9
572                         MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22      0x17059
573                 >;
574         };
575 
576         pinctrl_i2c1: i2c1grp {
577                 fsl,pins = <
578                         MX6SLL_PAD_I2C1_SCL__I2C1_SCL    0x4001b8b1
579                         MX6SLL_PAD_I2C1_SDA__I2C1_SDA    0x4001b8b1
580                 >;
581         };
582 
583         pinctrl_i2c3: i2c3grp {
584                 fsl,pins = <
585                         MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
586                         MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
587                 >;
588         };
589 
590         pinctrl_lcd: lcdgrp {
591                 fsl,pins = <
592                         MX6SLL_PAD_LCD_DATA00__LCD_DATA00       0x79
593                         MX6SLL_PAD_LCD_DATA01__LCD_DATA01       0x79
594                         MX6SLL_PAD_LCD_DATA02__LCD_DATA02       0x79
595                         MX6SLL_PAD_LCD_DATA03__LCD_DATA03       0x79
596                         MX6SLL_PAD_LCD_DATA04__LCD_DATA04       0x79
597                         MX6SLL_PAD_LCD_DATA05__LCD_DATA05       0x79
598                         MX6SLL_PAD_LCD_DATA06__LCD_DATA06       0x79
599                         MX6SLL_PAD_LCD_DATA07__LCD_DATA07       0x79
600                         MX6SLL_PAD_LCD_DATA08__LCD_DATA08       0x79
601                         MX6SLL_PAD_LCD_DATA09__LCD_DATA09       0x79
602                         MX6SLL_PAD_LCD_DATA10__LCD_DATA10       0x79
603                         MX6SLL_PAD_LCD_DATA11__LCD_DATA11       0x79
604                         MX6SLL_PAD_LCD_DATA12__LCD_DATA12       0x79
605                         MX6SLL_PAD_LCD_DATA13__LCD_DATA13       0x79
606                         MX6SLL_PAD_LCD_DATA14__LCD_DATA14       0x79
607                         MX6SLL_PAD_LCD_DATA15__LCD_DATA15       0x79
608                         MX6SLL_PAD_LCD_DATA16__LCD_DATA16       0x79
609                         MX6SLL_PAD_LCD_DATA17__LCD_DATA17       0x79
610                         MX6SLL_PAD_LCD_DATA18__LCD_DATA18       0x79
611                         MX6SLL_PAD_LCD_DATA19__LCD_DATA19       0x79
612                         MX6SLL_PAD_LCD_DATA20__LCD_DATA20       0x79
613                         MX6SLL_PAD_LCD_DATA21__LCD_DATA21       0x79
614                         MX6SLL_PAD_LCD_DATA22__LCD_DATA22       0x79
615                         MX6SLL_PAD_LCD_DATA23__LCD_DATA23       0x79
616                         MX6SLL_PAD_LCD_CLK__LCD_CLK             0x79
617                         MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE       0x79
618                         MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC         0x79
619                         MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC         0x79
620                         MX6SLL_PAD_LCD_RESET__LCD_RESET         0x79
621                 >;
622         };
623 
624         pinctrl_led: ledgrp {
625                 fsl,pins = <
626                         MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04       0x17059
627                 >;
628         };
629 
630         pinctrl_pwm1: pmw1grp {
631                 fsl,pins = <
632                         MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
633                 >;
634         };
635 
636         pinctrl_wdog1: wdog1grp {
637                 fsl,pins = <
638                         MX6SLL_PAD_WDOG_B__WDOG1_B   0x170b0
639                 >;
640         };
641 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php