1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2012 Freescale Semiconductor, Inc.
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include "imx28-pinfunc.h"
7
8 / {
9 #address-cells = <1>;
10 #size-cells = <1>;
11
12 interrupt-parent = <&icoll>;
13 /*
14 * The decompressor and also some bootloaders rely on a
15 * pre-existing /chosen node to be available to insert the
16 * command line and merge other ATAGS info.
17 */
18 chosen {};
19
20 aliases {
21 ethernet0 = &mac0;
22 ethernet1 = &mac1;
23 gpio0 = &gpio0;
24 gpio1 = &gpio1;
25 gpio2 = &gpio2;
26 gpio3 = &gpio3;
27 gpio4 = &gpio4;
28 saif0 = &saif0;
29 saif1 = &saif1;
30 serial0 = &auart0;
31 serial1 = &auart1;
32 serial2 = &auart2;
33 serial3 = &auart3;
34 serial4 = &auart4;
35 spi0 = &ssp1;
36 spi1 = &ssp2;
37 usbphy0 = &usbphy0;
38 usbphy1 = &usbphy1;
39 };
40
41 cpus {
42 #address-cells = <1>;
43 #size-cells = <0>;
44
45 cpu@0 {
46 compatible = "arm,arm926ej-s";
47 device_type = "cpu";
48 reg = <0>;
49 };
50 };
51
52 apb@80000000 {
53 compatible = "simple-bus";
54 #address-cells = <1>;
55 #size-cells = <1>;
56 reg = <0x80000000 0x80000>;
57 ranges;
58
59 apbh-bus@80000000 {
60 compatible = "simple-bus";
61 #address-cells = <1>;
62 #size-cells = <1>;
63 reg = <0x80000000 0x3c900>;
64 ranges;
65
66 icoll: interrupt-controller@80000000 {
67 compatible = "fsl,imx28-icoll", "fsl,icoll";
68 interrupt-controller;
69 #interrupt-cells = <1>;
70 reg = <0x80000000 0x2000>;
71 };
72
73 hsadc: hsadc@80002000 {
74 reg = <0x80002000 0x2000>;
75 interrupts = <13>;
76 dmas = <&dma_apbh 12>;
77 dma-names = "rx";
78 status = "disabled";
79 };
80
81 dma_apbh: dma-controller@80004000 {
82 compatible = "fsl,imx28-dma-apbh";
83 reg = <0x80004000 0x2000>;
84 interrupts = <82>, <83>, <84>, <85>,
85 <88>, <88>, <88>, <88>,
86 <88>, <88>, <88>, <88>,
87 <87>, <86>, <0>, <0>;
88 #dma-cells = <1>;
89 dma-channels = <16>;
90 clocks = <&clks 25>;
91 };
92
93 perfmon: perfmon@80006000 {
94 reg = <0x80006000 0x800>;
95 interrupts = <27>;
96 status = "disabled";
97 };
98
99 gpmi: nand-controller@8000c000 {
100 compatible = "fsl,imx28-gpmi-nand";
101 #address-cells = <1>;
102 #size-cells = <1>;
103 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
104 reg-names = "gpmi-nand", "bch";
105 interrupts = <41>;
106 interrupt-names = "bch";
107 clocks = <&clks 50>;
108 clock-names = "gpmi_io";
109 assigned-clocks = <&clks 13>;
110 assigned-clock-parents = <&clks 10>;
111 dmas = <&dma_apbh 4>;
112 dma-names = "rx-tx";
113 status = "disabled";
114 };
115
116 ssp0: spi@80010000 {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 reg = <0x80010000 0x2000>;
120 interrupts = <96>;
121 clocks = <&clks 46>;
122 dmas = <&dma_apbh 0>;
123 dma-names = "rx-tx";
124 status = "disabled";
125 };
126
127 ssp1: spi@80012000 {
128 #address-cells = <1>;
129 #size-cells = <0>;
130 reg = <0x80012000 0x2000>;
131 interrupts = <97>;
132 clocks = <&clks 47>;
133 dmas = <&dma_apbh 1>;
134 dma-names = "rx-tx";
135 status = "disabled";
136 };
137
138 ssp2: spi@80014000 {
139 #address-cells = <1>;
140 #size-cells = <0>;
141 reg = <0x80014000 0x2000>;
142 interrupts = <98>;
143 clocks = <&clks 48>;
144 dmas = <&dma_apbh 2>;
145 dma-names = "rx-tx";
146 status = "disabled";
147 };
148
149 ssp3: spi@80016000 {
150 #address-cells = <1>;
151 #size-cells = <0>;
152 reg = <0x80016000 0x2000>;
153 interrupts = <99>;
154 clocks = <&clks 49>;
155 dmas = <&dma_apbh 3>;
156 dma-names = "rx-tx";
157 status = "disabled";
158 };
159
160 pinctrl: pinctrl@80018000 {
161 #address-cells = <1>;
162 #size-cells = <0>;
163 compatible = "fsl,imx28-pinctrl", "simple-bus";
164 reg = <0x80018000 0x2000>;
165
166 gpio0: gpio@0 {
167 compatible = "fsl,imx28-gpio";
168 reg = <0>;
169 interrupts = <127>;
170 gpio-controller;
171 #gpio-cells = <2>;
172 interrupt-controller;
173 #interrupt-cells = <2>;
174 };
175
176 gpio1: gpio@1 {
177 compatible = "fsl,imx28-gpio";
178 reg = <1>;
179 interrupts = <126>;
180 gpio-controller;
181 #gpio-cells = <2>;
182 interrupt-controller;
183 #interrupt-cells = <2>;
184 };
185
186 gpio2: gpio@2 {
187 compatible = "fsl,imx28-gpio";
188 reg = <2>;
189 interrupts = <125>;
190 gpio-controller;
191 #gpio-cells = <2>;
192 interrupt-controller;
193 #interrupt-cells = <2>;
194 };
195
196 gpio3: gpio@3 {
197 compatible = "fsl,imx28-gpio";
198 reg = <3>;
199 interrupts = <124>;
200 gpio-controller;
201 #gpio-cells = <2>;
202 interrupt-controller;
203 #interrupt-cells = <2>;
204 };
205
206 gpio4: gpio@4 {
207 compatible = "fsl,imx28-gpio";
208 reg = <4>;
209 interrupts = <123>;
210 gpio-controller;
211 #gpio-cells = <2>;
212 interrupt-controller;
213 #interrupt-cells = <2>;
214 };
215
216 duart_pins_a: duart@0 {
217 reg = <0>;
218 fsl,pinmux-ids = <
219 MX28_PAD_PWM0__DUART_RX
220 MX28_PAD_PWM1__DUART_TX
221 >;
222 fsl,drive-strength = <MXS_DRIVE_4mA>;
223 fsl,voltage = <MXS_VOLTAGE_HIGH>;
224 fsl,pull-up = <MXS_PULL_DISABLE>;
225 };
226
227 duart_pins_b: duart@1 {
228 reg = <1>;
229 fsl,pinmux-ids = <
230 MX28_PAD_AUART0_CTS__DUART_RX
231 MX28_PAD_AUART0_RTS__DUART_TX
232 >;
233 fsl,drive-strength = <MXS_DRIVE_4mA>;
234 fsl,voltage = <MXS_VOLTAGE_HIGH>;
235 fsl,pull-up = <MXS_PULL_DISABLE>;
236 };
237
238 duart_4pins_a: duart-4pins@0 {
239 reg = <0>;
240 fsl,pinmux-ids = <
241 MX28_PAD_AUART0_CTS__DUART_RX
242 MX28_PAD_AUART0_RTS__DUART_TX
243 MX28_PAD_AUART0_RX__DUART_CTS
244 MX28_PAD_AUART0_TX__DUART_RTS
245 >;
246 fsl,drive-strength = <MXS_DRIVE_4mA>;
247 fsl,voltage = <MXS_VOLTAGE_HIGH>;
248 fsl,pull-up = <MXS_PULL_DISABLE>;
249 };
250
251 gpmi_pins_a: gpmi-nand@0 {
252 reg = <0>;
253 fsl,pinmux-ids = <
254 MX28_PAD_GPMI_D00__GPMI_D0
255 MX28_PAD_GPMI_D01__GPMI_D1
256 MX28_PAD_GPMI_D02__GPMI_D2
257 MX28_PAD_GPMI_D03__GPMI_D3
258 MX28_PAD_GPMI_D04__GPMI_D4
259 MX28_PAD_GPMI_D05__GPMI_D5
260 MX28_PAD_GPMI_D06__GPMI_D6
261 MX28_PAD_GPMI_D07__GPMI_D7
262 MX28_PAD_GPMI_CE0N__GPMI_CE0N
263 MX28_PAD_GPMI_RDY0__GPMI_READY0
264 MX28_PAD_GPMI_RDN__GPMI_RDN
265 MX28_PAD_GPMI_WRN__GPMI_WRN
266 MX28_PAD_GPMI_ALE__GPMI_ALE
267 MX28_PAD_GPMI_CLE__GPMI_CLE
268 MX28_PAD_GPMI_RESETN__GPMI_RESETN
269 >;
270 fsl,drive-strength = <MXS_DRIVE_4mA>;
271 fsl,voltage = <MXS_VOLTAGE_HIGH>;
272 fsl,pull-up = <MXS_PULL_DISABLE>;
273 };
274
275 gpmi_status_cfg: gpmi-status-cfg@0 {
276 reg = <0>;
277 fsl,pinmux-ids = <
278 MX28_PAD_GPMI_RDN__GPMI_RDN
279 MX28_PAD_GPMI_WRN__GPMI_WRN
280 MX28_PAD_GPMI_RESETN__GPMI_RESETN
281 >;
282 fsl,drive-strength = <MXS_DRIVE_12mA>;
283 };
284
285 auart0_pins_a: auart0@0 {
286 reg = <0>;
287 fsl,pinmux-ids = <
288 MX28_PAD_AUART0_RX__AUART0_RX
289 MX28_PAD_AUART0_TX__AUART0_TX
290 MX28_PAD_AUART0_CTS__AUART0_CTS
291 MX28_PAD_AUART0_RTS__AUART0_RTS
292 >;
293 fsl,drive-strength = <MXS_DRIVE_4mA>;
294 fsl,voltage = <MXS_VOLTAGE_HIGH>;
295 fsl,pull-up = <MXS_PULL_DISABLE>;
296 };
297
298 auart0_2pins_a: auart0-2pins@0 {
299 reg = <0>;
300 fsl,pinmux-ids = <
301 MX28_PAD_AUART0_RX__AUART0_RX
302 MX28_PAD_AUART0_TX__AUART0_TX
303 >;
304 fsl,drive-strength = <MXS_DRIVE_4mA>;
305 fsl,voltage = <MXS_VOLTAGE_HIGH>;
306 fsl,pull-up = <MXS_PULL_DISABLE>;
307 };
308
309 auart1_pins_a: auart1@0 {
310 reg = <0>;
311 fsl,pinmux-ids = <
312 MX28_PAD_AUART1_RX__AUART1_RX
313 MX28_PAD_AUART1_TX__AUART1_TX
314 MX28_PAD_AUART1_CTS__AUART1_CTS
315 MX28_PAD_AUART1_RTS__AUART1_RTS
316 >;
317 fsl,drive-strength = <MXS_DRIVE_4mA>;
318 fsl,voltage = <MXS_VOLTAGE_HIGH>;
319 fsl,pull-up = <MXS_PULL_DISABLE>;
320 };
321
322 auart1_2pins_a: auart1-2pins@0 {
323 reg = <0>;
324 fsl,pinmux-ids = <
325 MX28_PAD_AUART1_RX__AUART1_RX
326 MX28_PAD_AUART1_TX__AUART1_TX
327 >;
328 fsl,drive-strength = <MXS_DRIVE_4mA>;
329 fsl,voltage = <MXS_VOLTAGE_HIGH>;
330 fsl,pull-up = <MXS_PULL_DISABLE>;
331 };
332
333 auart2_2pins_a: auart2-2pins@0 {
334 reg = <0>;
335 fsl,pinmux-ids = <
336 MX28_PAD_SSP2_SCK__AUART2_RX
337 MX28_PAD_SSP2_MOSI__AUART2_TX
338 >;
339 fsl,drive-strength = <MXS_DRIVE_4mA>;
340 fsl,voltage = <MXS_VOLTAGE_HIGH>;
341 fsl,pull-up = <MXS_PULL_DISABLE>;
342 };
343
344 auart2_2pins_b: auart2-2pins@1 {
345 reg = <1>;
346 fsl,pinmux-ids = <
347 MX28_PAD_AUART2_RX__AUART2_RX
348 MX28_PAD_AUART2_TX__AUART2_TX
349 >;
350 fsl,drive-strength = <MXS_DRIVE_4mA>;
351 fsl,voltage = <MXS_VOLTAGE_HIGH>;
352 fsl,pull-up = <MXS_PULL_DISABLE>;
353 };
354
355 auart2_pins_a: auart2-pins@0 {
356 reg = <0>;
357 fsl,pinmux-ids = <
358 MX28_PAD_AUART2_RX__AUART2_RX
359 MX28_PAD_AUART2_TX__AUART2_TX
360 MX28_PAD_AUART2_CTS__AUART2_CTS
361 MX28_PAD_AUART2_RTS__AUART2_RTS
362 >;
363 fsl,drive-strength = <MXS_DRIVE_4mA>;
364 fsl,voltage = <MXS_VOLTAGE_HIGH>;
365 fsl,pull-up = <MXS_PULL_DISABLE>;
366 };
367
368 auart3_pins_a: auart3@0 {
369 reg = <0>;
370 fsl,pinmux-ids = <
371 MX28_PAD_AUART3_RX__AUART3_RX
372 MX28_PAD_AUART3_TX__AUART3_TX
373 MX28_PAD_AUART3_CTS__AUART3_CTS
374 MX28_PAD_AUART3_RTS__AUART3_RTS
375 >;
376 fsl,drive-strength = <MXS_DRIVE_4mA>;
377 fsl,voltage = <MXS_VOLTAGE_HIGH>;
378 fsl,pull-up = <MXS_PULL_DISABLE>;
379 };
380
381 auart3_2pins_a: auart3-2pins@0 {
382 reg = <0>;
383 fsl,pinmux-ids = <
384 MX28_PAD_SSP2_MISO__AUART3_RX
385 MX28_PAD_SSP2_SS0__AUART3_TX
386 >;
387 fsl,drive-strength = <MXS_DRIVE_4mA>;
388 fsl,voltage = <MXS_VOLTAGE_HIGH>;
389 fsl,pull-up = <MXS_PULL_DISABLE>;
390 };
391
392 auart3_2pins_b: auart3-2pins@1 {
393 reg = <1>;
394 fsl,pinmux-ids = <
395 MX28_PAD_AUART3_RX__AUART3_RX
396 MX28_PAD_AUART3_TX__AUART3_TX
397 >;
398 fsl,drive-strength = <MXS_DRIVE_4mA>;
399 fsl,voltage = <MXS_VOLTAGE_HIGH>;
400 fsl,pull-up = <MXS_PULL_DISABLE>;
401 };
402
403 auart4_2pins_a: auart4@0 {
404 reg = <0>;
405 fsl,pinmux-ids = <
406 MX28_PAD_SSP3_SCK__AUART4_TX
407 MX28_PAD_SSP3_MOSI__AUART4_RX
408 >;
409 fsl,drive-strength = <MXS_DRIVE_4mA>;
410 fsl,voltage = <MXS_VOLTAGE_HIGH>;
411 fsl,pull-up = <MXS_PULL_DISABLE>;
412 };
413
414 auart4_2pins_b: auart4@1 {
415 reg = <1>;
416 fsl,pinmux-ids = <
417 MX28_PAD_AUART0_CTS__AUART4_RX
418 MX28_PAD_AUART0_RTS__AUART4_TX
419 >;
420 fsl,drive-strength = <MXS_DRIVE_4mA>;
421 fsl,voltage = <MXS_VOLTAGE_HIGH>;
422 fsl,pull-up = <MXS_PULL_DISABLE>;
423 };
424
425 mac0_pins_a: mac0@0 {
426 reg = <0>;
427 fsl,pinmux-ids = <
428 MX28_PAD_ENET0_MDC__ENET0_MDC
429 MX28_PAD_ENET0_MDIO__ENET0_MDIO
430 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
431 MX28_PAD_ENET0_RXD0__ENET0_RXD0
432 MX28_PAD_ENET0_RXD1__ENET0_RXD1
433 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
434 MX28_PAD_ENET0_TXD0__ENET0_TXD0
435 MX28_PAD_ENET0_TXD1__ENET0_TXD1
436 MX28_PAD_ENET_CLK__CLKCTRL_ENET
437 >;
438 fsl,drive-strength = <MXS_DRIVE_8mA>;
439 fsl,voltage = <MXS_VOLTAGE_HIGH>;
440 fsl,pull-up = <MXS_PULL_ENABLE>;
441 };
442
443 mac0_pins_b: mac0@1 {
444 reg = <1>;
445 fsl,pinmux-ids = <
446 MX28_PAD_ENET0_MDC__ENET0_MDC
447 MX28_PAD_ENET0_MDIO__ENET0_MDIO
448 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
449 MX28_PAD_ENET0_RXD0__ENET0_RXD0
450 MX28_PAD_ENET0_RXD1__ENET0_RXD1
451 MX28_PAD_ENET0_RXD2__ENET0_RXD2
452 MX28_PAD_ENET0_RXD3__ENET0_RXD3
453 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
454 MX28_PAD_ENET0_TXD0__ENET0_TXD0
455 MX28_PAD_ENET0_TXD1__ENET0_TXD1
456 MX28_PAD_ENET0_TXD2__ENET0_TXD2
457 MX28_PAD_ENET0_TXD3__ENET0_TXD3
458 MX28_PAD_ENET_CLK__CLKCTRL_ENET
459 MX28_PAD_ENET0_COL__ENET0_COL
460 MX28_PAD_ENET0_CRS__ENET0_CRS
461 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
462 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
463 >;
464 fsl,drive-strength = <MXS_DRIVE_8mA>;
465 fsl,voltage = <MXS_VOLTAGE_HIGH>;
466 fsl,pull-up = <MXS_PULL_ENABLE>;
467 };
468
469 mac1_pins_a: mac1@0 {
470 reg = <0>;
471 fsl,pinmux-ids = <
472 MX28_PAD_ENET0_CRS__ENET1_RX_EN
473 MX28_PAD_ENET0_RXD2__ENET1_RXD0
474 MX28_PAD_ENET0_RXD3__ENET1_RXD1
475 MX28_PAD_ENET0_COL__ENET1_TX_EN
476 MX28_PAD_ENET0_TXD2__ENET1_TXD0
477 MX28_PAD_ENET0_TXD3__ENET1_TXD1
478 >;
479 fsl,drive-strength = <MXS_DRIVE_8mA>;
480 fsl,voltage = <MXS_VOLTAGE_HIGH>;
481 fsl,pull-up = <MXS_PULL_ENABLE>;
482 };
483
484 mmc0_8bit_pins_a: mmc0-8bit@0 {
485 reg = <0>;
486 fsl,pinmux-ids = <
487 MX28_PAD_SSP0_DATA0__SSP0_D0
488 MX28_PAD_SSP0_DATA1__SSP0_D1
489 MX28_PAD_SSP0_DATA2__SSP0_D2
490 MX28_PAD_SSP0_DATA3__SSP0_D3
491 MX28_PAD_SSP0_DATA4__SSP0_D4
492 MX28_PAD_SSP0_DATA5__SSP0_D5
493 MX28_PAD_SSP0_DATA6__SSP0_D6
494 MX28_PAD_SSP0_DATA7__SSP0_D7
495 MX28_PAD_SSP0_CMD__SSP0_CMD
496 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
497 MX28_PAD_SSP0_SCK__SSP0_SCK
498 >;
499 fsl,drive-strength = <MXS_DRIVE_8mA>;
500 fsl,voltage = <MXS_VOLTAGE_HIGH>;
501 fsl,pull-up = <MXS_PULL_ENABLE>;
502 };
503
504 mmc0_4bit_pins_a: mmc0-4bit@0 {
505 reg = <0>;
506 fsl,pinmux-ids = <
507 MX28_PAD_SSP0_DATA0__SSP0_D0
508 MX28_PAD_SSP0_DATA1__SSP0_D1
509 MX28_PAD_SSP0_DATA2__SSP0_D2
510 MX28_PAD_SSP0_DATA3__SSP0_D3
511 MX28_PAD_SSP0_CMD__SSP0_CMD
512 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
513 MX28_PAD_SSP0_SCK__SSP0_SCK
514 >;
515 fsl,drive-strength = <MXS_DRIVE_8mA>;
516 fsl,voltage = <MXS_VOLTAGE_HIGH>;
517 fsl,pull-up = <MXS_PULL_ENABLE>;
518 };
519
520 mmc0_cd_cfg: mmc0-cd-cfg@0 {
521 reg = <0>;
522 fsl,pinmux-ids = <
523 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
524 >;
525 fsl,pull-up = <MXS_PULL_DISABLE>;
526 };
527
528 mmc0_sck_cfg: mmc0-sck-cfg@0 {
529 reg = <0>;
530 fsl,pinmux-ids = <
531 MX28_PAD_SSP0_SCK__SSP0_SCK
532 >;
533 fsl,drive-strength = <MXS_DRIVE_12mA>;
534 fsl,pull-up = <MXS_PULL_DISABLE>;
535 };
536
537 mmc1_4bit_pins_a: mmc1-4bit@0 {
538 reg = <0>;
539 fsl,pinmux-ids = <
540 MX28_PAD_GPMI_D00__SSP1_D0
541 MX28_PAD_GPMI_D01__SSP1_D1
542 MX28_PAD_GPMI_D02__SSP1_D2
543 MX28_PAD_GPMI_D03__SSP1_D3
544 MX28_PAD_GPMI_RDY1__SSP1_CMD
545 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
546 MX28_PAD_GPMI_WRN__SSP1_SCK
547 >;
548 fsl,drive-strength = <MXS_DRIVE_8mA>;
549 fsl,voltage = <MXS_VOLTAGE_HIGH>;
550 fsl,pull-up = <MXS_PULL_ENABLE>;
551 };
552
553 mmc1_cd_cfg: mmc1-cd-cfg@0 {
554 reg = <0>;
555 fsl,pinmux-ids = <
556 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
557 >;
558 fsl,pull-up = <MXS_PULL_DISABLE>;
559 };
560
561 mmc1_sck_cfg: mmc1-sck-cfg@0 {
562 reg = <0>;
563 fsl,pinmux-ids = <
564 MX28_PAD_GPMI_WRN__SSP1_SCK
565 >;
566 fsl,drive-strength = <MXS_DRIVE_12mA>;
567 fsl,pull-up = <MXS_PULL_DISABLE>;
568 };
569
570
571 mmc2_4bit_pins_a: mmc2-4bit@0 {
572 reg = <0>;
573 fsl,pinmux-ids = <
574 MX28_PAD_SSP0_DATA4__SSP2_D0
575 MX28_PAD_SSP1_SCK__SSP2_D1
576 MX28_PAD_SSP1_CMD__SSP2_D2
577 MX28_PAD_SSP0_DATA5__SSP2_D3
578 MX28_PAD_SSP0_DATA6__SSP2_CMD
579 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
580 MX28_PAD_SSP0_DATA7__SSP2_SCK
581 >;
582 fsl,drive-strength = <MXS_DRIVE_8mA>;
583 fsl,voltage = <MXS_VOLTAGE_HIGH>;
584 fsl,pull-up = <MXS_PULL_ENABLE>;
585 };
586
587 mmc2_4bit_pins_b: mmc2-4bit@1 {
588 reg = <1>;
589 fsl,pinmux-ids = <
590 MX28_PAD_SSP2_SCK__SSP2_SCK
591 MX28_PAD_SSP2_MOSI__SSP2_CMD
592 MX28_PAD_SSP2_MISO__SSP2_D0
593 MX28_PAD_SSP2_SS0__SSP2_D3
594 MX28_PAD_SSP2_SS1__SSP2_D1
595 MX28_PAD_SSP2_SS2__SSP2_D2
596 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
597 >;
598 fsl,drive-strength = <MXS_DRIVE_8mA>;
599 fsl,voltage = <MXS_VOLTAGE_HIGH>;
600 fsl,pull-up = <MXS_PULL_ENABLE>;
601 };
602
603 mmc2_cd_cfg: mmc2-cd-cfg@0 {
604 reg = <0>;
605 fsl,pinmux-ids = <
606 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
607 >;
608 fsl,pull-up = <MXS_PULL_DISABLE>;
609 };
610
611 mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
612 reg = <0>;
613 fsl,pinmux-ids = <
614 MX28_PAD_SSP0_DATA7__SSP2_SCK
615 >;
616 fsl,drive-strength = <MXS_DRIVE_12mA>;
617 fsl,pull-up = <MXS_PULL_DISABLE>;
618 };
619
620 mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
621 reg = <1>;
622 fsl,pinmux-ids = <
623 MX28_PAD_SSP2_SCK__SSP2_SCK
624 >;
625 fsl,drive-strength = <MXS_DRIVE_12mA>;
626 fsl,pull-up = <MXS_PULL_DISABLE>;
627 };
628
629 i2c0_pins_a: i2c0@0 {
630 reg = <0>;
631 fsl,pinmux-ids = <
632 MX28_PAD_I2C0_SCL__I2C0_SCL
633 MX28_PAD_I2C0_SDA__I2C0_SDA
634 >;
635 fsl,drive-strength = <MXS_DRIVE_8mA>;
636 fsl,voltage = <MXS_VOLTAGE_HIGH>;
637 fsl,pull-up = <MXS_PULL_ENABLE>;
638 };
639
640 i2c0_pins_b: i2c0@1 {
641 reg = <1>;
642 fsl,pinmux-ids = <
643 MX28_PAD_AUART0_RX__I2C0_SCL
644 MX28_PAD_AUART0_TX__I2C0_SDA
645 >;
646 fsl,drive-strength = <MXS_DRIVE_8mA>;
647 fsl,voltage = <MXS_VOLTAGE_HIGH>;
648 fsl,pull-up = <MXS_PULL_ENABLE>;
649 };
650
651 i2c1_pins_a: i2c1@0 {
652 reg = <0>;
653 fsl,pinmux-ids = <
654 MX28_PAD_PWM0__I2C1_SCL
655 MX28_PAD_PWM1__I2C1_SDA
656 >;
657 fsl,drive-strength = <MXS_DRIVE_8mA>;
658 fsl,voltage = <MXS_VOLTAGE_HIGH>;
659 fsl,pull-up = <MXS_PULL_ENABLE>;
660 };
661
662 i2c1_pins_b: i2c1@1 {
663 reg = <1>;
664 fsl,pinmux-ids = <
665 MX28_PAD_AUART2_CTS__I2C1_SCL
666 MX28_PAD_AUART2_RTS__I2C1_SDA
667 >;
668 fsl,drive-strength = <MXS_DRIVE_8mA>;
669 fsl,voltage = <MXS_VOLTAGE_HIGH>;
670 fsl,pull-up = <MXS_PULL_ENABLE>;
671 };
672
673 saif0_pins_a: saif0@0 {
674 reg = <0>;
675 fsl,pinmux-ids = <
676 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
677 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
678 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
679 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
680 >;
681 fsl,drive-strength = <MXS_DRIVE_12mA>;
682 fsl,voltage = <MXS_VOLTAGE_HIGH>;
683 fsl,pull-up = <MXS_PULL_ENABLE>;
684 };
685
686 saif0_pins_b: saif0@1 {
687 reg = <1>;
688 fsl,pinmux-ids = <
689 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
690 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
691 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
692 >;
693 fsl,drive-strength = <MXS_DRIVE_12mA>;
694 fsl,voltage = <MXS_VOLTAGE_HIGH>;
695 fsl,pull-up = <MXS_PULL_ENABLE>;
696 };
697
698 saif1_pins_a: saif1@0 {
699 reg = <0>;
700 fsl,pinmux-ids = <
701 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
702 >;
703 fsl,drive-strength = <MXS_DRIVE_12mA>;
704 fsl,voltage = <MXS_VOLTAGE_HIGH>;
705 fsl,pull-up = <MXS_PULL_ENABLE>;
706 };
707
708 pwm0_pins_a: pwm0@0 {
709 reg = <0>;
710 fsl,pinmux-ids = <
711 MX28_PAD_PWM0__PWM_0
712 >;
713 fsl,drive-strength = <MXS_DRIVE_4mA>;
714 fsl,voltage = <MXS_VOLTAGE_HIGH>;
715 fsl,pull-up = <MXS_PULL_DISABLE>;
716 };
717
718 pwm2_pins_a: pwm2@0 {
719 reg = <0>;
720 fsl,pinmux-ids = <
721 MX28_PAD_PWM2__PWM_2
722 >;
723 fsl,drive-strength = <MXS_DRIVE_4mA>;
724 fsl,voltage = <MXS_VOLTAGE_HIGH>;
725 fsl,pull-up = <MXS_PULL_DISABLE>;
726 };
727
728 pwm3_pins_a: pwm3@0 {
729 reg = <0>;
730 fsl,pinmux-ids = <
731 MX28_PAD_PWM3__PWM_3
732 >;
733 fsl,drive-strength = <MXS_DRIVE_4mA>;
734 fsl,voltage = <MXS_VOLTAGE_HIGH>;
735 fsl,pull-up = <MXS_PULL_DISABLE>;
736 };
737
738 pwm3_pins_b: pwm3@1 {
739 reg = <1>;
740 fsl,pinmux-ids = <
741 MX28_PAD_SAIF0_MCLK__PWM_3
742 >;
743 fsl,drive-strength = <MXS_DRIVE_4mA>;
744 fsl,voltage = <MXS_VOLTAGE_HIGH>;
745 fsl,pull-up = <MXS_PULL_DISABLE>;
746 };
747
748 pwm4_pins_a: pwm4@0 {
749 reg = <0>;
750 fsl,pinmux-ids = <
751 MX28_PAD_PWM4__PWM_4
752 >;
753 fsl,drive-strength = <MXS_DRIVE_4mA>;
754 fsl,voltage = <MXS_VOLTAGE_HIGH>;
755 fsl,pull-up = <MXS_PULL_DISABLE>;
756 };
757
758 lcdif_24bit_pins_a: lcdif-24bit@0 {
759 reg = <0>;
760 fsl,pinmux-ids = <
761 MX28_PAD_LCD_D00__LCD_D0
762 MX28_PAD_LCD_D01__LCD_D1
763 MX28_PAD_LCD_D02__LCD_D2
764 MX28_PAD_LCD_D03__LCD_D3
765 MX28_PAD_LCD_D04__LCD_D4
766 MX28_PAD_LCD_D05__LCD_D5
767 MX28_PAD_LCD_D06__LCD_D6
768 MX28_PAD_LCD_D07__LCD_D7
769 MX28_PAD_LCD_D08__LCD_D8
770 MX28_PAD_LCD_D09__LCD_D9
771 MX28_PAD_LCD_D10__LCD_D10
772 MX28_PAD_LCD_D11__LCD_D11
773 MX28_PAD_LCD_D12__LCD_D12
774 MX28_PAD_LCD_D13__LCD_D13
775 MX28_PAD_LCD_D14__LCD_D14
776 MX28_PAD_LCD_D15__LCD_D15
777 MX28_PAD_LCD_D16__LCD_D16
778 MX28_PAD_LCD_D17__LCD_D17
779 MX28_PAD_LCD_D18__LCD_D18
780 MX28_PAD_LCD_D19__LCD_D19
781 MX28_PAD_LCD_D20__LCD_D20
782 MX28_PAD_LCD_D21__LCD_D21
783 MX28_PAD_LCD_D22__LCD_D22
784 MX28_PAD_LCD_D23__LCD_D23
785 >;
786 fsl,drive-strength = <MXS_DRIVE_4mA>;
787 fsl,voltage = <MXS_VOLTAGE_HIGH>;
788 fsl,pull-up = <MXS_PULL_DISABLE>;
789 };
790
791 lcdif_18bit_pins_a: lcdif-18bit@0 {
792 reg = <0>;
793 fsl,pinmux-ids = <
794 MX28_PAD_LCD_D00__LCD_D0
795 MX28_PAD_LCD_D01__LCD_D1
796 MX28_PAD_LCD_D02__LCD_D2
797 MX28_PAD_LCD_D03__LCD_D3
798 MX28_PAD_LCD_D04__LCD_D4
799 MX28_PAD_LCD_D05__LCD_D5
800 MX28_PAD_LCD_D06__LCD_D6
801 MX28_PAD_LCD_D07__LCD_D7
802 MX28_PAD_LCD_D08__LCD_D8
803 MX28_PAD_LCD_D09__LCD_D9
804 MX28_PAD_LCD_D10__LCD_D10
805 MX28_PAD_LCD_D11__LCD_D11
806 MX28_PAD_LCD_D12__LCD_D12
807 MX28_PAD_LCD_D13__LCD_D13
808 MX28_PAD_LCD_D14__LCD_D14
809 MX28_PAD_LCD_D15__LCD_D15
810 MX28_PAD_LCD_D16__LCD_D16
811 MX28_PAD_LCD_D17__LCD_D17
812 >;
813 fsl,drive-strength = <MXS_DRIVE_4mA>;
814 fsl,voltage = <MXS_VOLTAGE_HIGH>;
815 fsl,pull-up = <MXS_PULL_DISABLE>;
816 };
817
818 lcdif_16bit_pins_a: lcdif-16bit@0 {
819 reg = <0>;
820 fsl,pinmux-ids = <
821 MX28_PAD_LCD_D00__LCD_D0
822 MX28_PAD_LCD_D01__LCD_D1
823 MX28_PAD_LCD_D02__LCD_D2
824 MX28_PAD_LCD_D03__LCD_D3
825 MX28_PAD_LCD_D04__LCD_D4
826 MX28_PAD_LCD_D05__LCD_D5
827 MX28_PAD_LCD_D06__LCD_D6
828 MX28_PAD_LCD_D07__LCD_D7
829 MX28_PAD_LCD_D08__LCD_D8
830 MX28_PAD_LCD_D09__LCD_D9
831 MX28_PAD_LCD_D10__LCD_D10
832 MX28_PAD_LCD_D11__LCD_D11
833 MX28_PAD_LCD_D12__LCD_D12
834 MX28_PAD_LCD_D13__LCD_D13
835 MX28_PAD_LCD_D14__LCD_D14
836 MX28_PAD_LCD_D15__LCD_D15
837 >;
838 fsl,drive-strength = <MXS_DRIVE_4mA>;
839 fsl,voltage = <MXS_VOLTAGE_HIGH>;
840 fsl,pull-up = <MXS_PULL_DISABLE>;
841 };
842
843 lcdif_sync_pins_a: lcdif-sync@0 {
844 reg = <0>;
845 fsl,pinmux-ids = <
846 MX28_PAD_LCD_RS__LCD_DOTCLK
847 MX28_PAD_LCD_CS__LCD_ENABLE
848 MX28_PAD_LCD_RD_E__LCD_VSYNC
849 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
850 >;
851 fsl,drive-strength = <MXS_DRIVE_4mA>;
852 fsl,voltage = <MXS_VOLTAGE_HIGH>;
853 fsl,pull-up = <MXS_PULL_DISABLE>;
854 };
855
856 can0_pins_a: can0@0 {
857 reg = <0>;
858 fsl,pinmux-ids = <
859 MX28_PAD_GPMI_RDY2__CAN0_TX
860 MX28_PAD_GPMI_RDY3__CAN0_RX
861 >;
862 fsl,drive-strength = <MXS_DRIVE_4mA>;
863 fsl,voltage = <MXS_VOLTAGE_HIGH>;
864 fsl,pull-up = <MXS_PULL_DISABLE>;
865 };
866
867 can1_pins_a: can1@0 {
868 reg = <0>;
869 fsl,pinmux-ids = <
870 MX28_PAD_GPMI_CE2N__CAN1_TX
871 MX28_PAD_GPMI_CE3N__CAN1_RX
872 >;
873 fsl,drive-strength = <MXS_DRIVE_4mA>;
874 fsl,voltage = <MXS_VOLTAGE_HIGH>;
875 fsl,pull-up = <MXS_PULL_DISABLE>;
876 };
877
878 spi2_pins_a: spi2@0 {
879 reg = <0>;
880 fsl,pinmux-ids = <
881 MX28_PAD_SSP2_SCK__SSP2_SCK
882 MX28_PAD_SSP2_MOSI__SSP2_CMD
883 MX28_PAD_SSP2_MISO__SSP2_D0
884 MX28_PAD_SSP2_SS0__SSP2_D3
885 >;
886 fsl,drive-strength = <MXS_DRIVE_8mA>;
887 fsl,voltage = <MXS_VOLTAGE_HIGH>;
888 fsl,pull-up = <MXS_PULL_ENABLE>;
889 };
890
891 spi3_pins_a: spi3@0 {
892 reg = <0>;
893 fsl,pinmux-ids = <
894 MX28_PAD_AUART2_RX__SSP3_D4
895 MX28_PAD_AUART2_TX__SSP3_D5
896 MX28_PAD_SSP3_SCK__SSP3_SCK
897 MX28_PAD_SSP3_MOSI__SSP3_CMD
898 MX28_PAD_SSP3_MISO__SSP3_D0
899 MX28_PAD_SSP3_SS0__SSP3_D3
900 >;
901 fsl,drive-strength = <MXS_DRIVE_8mA>;
902 fsl,voltage = <MXS_VOLTAGE_HIGH>;
903 fsl,pull-up = <MXS_PULL_DISABLE>;
904 };
905
906 spi3_pins_b: spi3@1 {
907 reg = <1>;
908 fsl,pinmux-ids = <
909 MX28_PAD_SSP3_SCK__SSP3_SCK
910 MX28_PAD_SSP3_MOSI__SSP3_CMD
911 MX28_PAD_SSP3_MISO__SSP3_D0
912 MX28_PAD_SSP3_SS0__SSP3_D3
913 >;
914 fsl,drive-strength = <MXS_DRIVE_8mA>;
915 fsl,voltage = <MXS_VOLTAGE_HIGH>;
916 fsl,pull-up = <MXS_PULL_ENABLE>;
917 };
918
919 usb0_pins_a: usb0@0 {
920 reg = <0>;
921 fsl,pinmux-ids = <
922 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
923 >;
924 fsl,drive-strength = <MXS_DRIVE_12mA>;
925 fsl,voltage = <MXS_VOLTAGE_HIGH>;
926 fsl,pull-up = <MXS_PULL_DISABLE>;
927 };
928
929 usb0_pins_b: usb0@1 {
930 reg = <1>;
931 fsl,pinmux-ids = <
932 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
933 >;
934 fsl,drive-strength = <MXS_DRIVE_12mA>;
935 fsl,voltage = <MXS_VOLTAGE_HIGH>;
936 fsl,pull-up = <MXS_PULL_DISABLE>;
937 };
938
939 usb1_pins_a: usb1@0 {
940 reg = <0>;
941 fsl,pinmux-ids = <
942 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
943 >;
944 fsl,drive-strength = <MXS_DRIVE_12mA>;
945 fsl,voltage = <MXS_VOLTAGE_HIGH>;
946 fsl,pull-up = <MXS_PULL_DISABLE>;
947 };
948
949 usb1_pins_b: usb1@1 {
950 reg = <1>;
951 fsl,pinmux-ids = <
952 MX28_PAD_PWM2__USB1_OVERCURRENT
953 >;
954 fsl,drive-strength = <MXS_DRIVE_12mA>;
955 fsl,voltage = <MXS_VOLTAGE_HIGH>;
956 fsl,pull-up = <MXS_PULL_DISABLE>;
957 };
958
959 usb0_id_pins_a: usb0id@0 {
960 reg = <0>;
961 fsl,pinmux-ids = <
962 MX28_PAD_AUART1_RTS__USB0_ID
963 >;
964 fsl,drive-strength = <MXS_DRIVE_12mA>;
965 fsl,voltage = <MXS_VOLTAGE_HIGH>;
966 fsl,pull-up = <MXS_PULL_ENABLE>;
967 };
968
969 usb0_id_pins_b: usb0id1@0 {
970 reg = <0>;
971 fsl,pinmux-ids = <
972 MX28_PAD_PWM2__USB0_ID
973 >;
974 fsl,drive-strength = <MXS_DRIVE_12mA>;
975 fsl,voltage = <MXS_VOLTAGE_HIGH>;
976 fsl,pull-up = <MXS_PULL_ENABLE>;
977 };
978
979 };
980
981 digctl: digctl@8001c000 {
982 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
983 reg = <0x8001c000 0x2000>;
984 interrupts = <89>;
985 status = "disabled";
986 };
987
988 etm: etm@80022000 {
989 reg = <0x80022000 0x2000>;
990 status = "disabled";
991 };
992
993 dma_apbx: dma-controller@80024000 {
994 compatible = "fsl,imx28-dma-apbx";
995 reg = <0x80024000 0x2000>;
996 interrupts = <78>, <79>, <66>, <0>,
997 <80>, <81>, <68>, <69>,
998 <70>, <71>, <72>, <73>,
999 <74>, <75>, <76>, <77>;
1000 #dma-cells = <1>;
1001 dma-channels = <16>;
1002 clocks = <&clks 26>;
1003 };
1004
1005 dcp: crypto@80028000 {
1006 compatible = "fsl,imx28-dcp";
1007 reg = <0x80028000 0x2000>;
1008 interrupts = <52>, <53>, <54>;
1009 status = "okay";
1010 };
1011
1012 pxp: pxp@8002a000 {
1013 reg = <0x8002a000 0x2000>;
1014 interrupts = <39>;
1015 status = "disabled";
1016 };
1017
1018 ocotp: efuse@8002c000 {
1019 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
1020 #address-cells = <1>;
1021 #size-cells = <1>;
1022 reg = <0x8002c000 0x2000>;
1023 clocks = <&clks 25>;
1024 };
1025
1026 axi-ahb@8002e000 {
1027 reg = <0x8002e000 0x2000>;
1028 status = "disabled";
1029 };
1030
1031 lcdif: lcdif@80030000 {
1032 compatible = "fsl,imx28-lcdif";
1033 reg = <0x80030000 0x2000>;
1034 interrupts = <38>;
1035 clocks = <&clks 55>;
1036 dmas = <&dma_apbh 13>;
1037 dma-names = "rx";
1038 status = "disabled";
1039 };
1040
1041 can0: can@80032000 {
1042 compatible = "fsl,imx28-flexcan";
1043 reg = <0x80032000 0x2000>;
1044 interrupts = <8>;
1045 clocks = <&clks 58>, <&clks 58>;
1046 clock-names = "ipg", "per";
1047 status = "disabled";
1048 };
1049
1050 can1: can@80034000 {
1051 compatible = "fsl,imx28-flexcan";
1052 reg = <0x80034000 0x2000>;
1053 interrupts = <9>;
1054 clocks = <&clks 59>, <&clks 59>;
1055 clock-names = "ipg", "per";
1056 status = "disabled";
1057 };
1058
1059 simdbg: simdbg@8003c000 {
1060 reg = <0x8003c000 0x200>;
1061 status = "disabled";
1062 };
1063
1064 simgpmisel: simgpmisel@8003c200 {
1065 reg = <0x8003c200 0x100>;
1066 status = "disabled";
1067 };
1068
1069 simsspsel: simsspsel@8003c300 {
1070 reg = <0x8003c300 0x100>;
1071 status = "disabled";
1072 };
1073
1074 simmemsel: simmemsel@8003c400 {
1075 reg = <0x8003c400 0x100>;
1076 status = "disabled";
1077 };
1078
1079 gpiomon: gpiomon@8003c500 {
1080 reg = <0x8003c500 0x100>;
1081 status = "disabled";
1082 };
1083
1084 simenet: simenet@8003c700 {
1085 reg = <0x8003c700 0x100>;
1086 status = "disabled";
1087 };
1088
1089 armjtag: armjtag@8003c800 {
1090 reg = <0x8003c800 0x100>;
1091 status = "disabled";
1092 };
1093 };
1094
1095 apbx-bus@80040000 {
1096 compatible = "simple-bus";
1097 #address-cells = <1>;
1098 #size-cells = <1>;
1099 reg = <0x80040000 0x40000>;
1100 ranges;
1101
1102 clks: clkctrl@80040000 {
1103 compatible = "fsl,imx28-clkctrl";
1104 reg = <0x80040000 0x2000>;
1105 #clock-cells = <1>;
1106 };
1107
1108 saif0: saif@80042000 {
1109 #sound-dai-cells = <0>;
1110 compatible = "fsl,imx28-saif";
1111 reg = <0x80042000 0x2000>;
1112 interrupts = <59>;
1113 #clock-cells = <0>;
1114 clocks = <&clks 53>;
1115 dmas = <&dma_apbx 4>;
1116 dma-names = "rx-tx";
1117 status = "disabled";
1118 };
1119
1120 power: power@80044000 {
1121 reg = <0x80044000 0x2000>;
1122 status = "disabled";
1123 };
1124
1125 saif1: saif@80046000 {
1126 #sound-dai-cells = <0>;
1127 compatible = "fsl,imx28-saif";
1128 reg = <0x80046000 0x2000>;
1129 interrupts = <58>;
1130 clocks = <&clks 54>;
1131 dmas = <&dma_apbx 5>;
1132 dma-names = "rx-tx";
1133 status = "disabled";
1134 };
1135
1136 lradc: lradc@80050000 {
1137 compatible = "fsl,imx28-lradc";
1138 reg = <0x80050000 0x2000>;
1139 interrupts = <10>, <14>, <15>, <16>, <17>, <18>, <19>,
1140 <20>, <21>, <22>, <23>, <24>, <25>;
1141 status = "disabled";
1142 clocks = <&clks 41>;
1143 #io-channel-cells = <1>;
1144 };
1145
1146 spdif: spdif@80054000 {
1147 reg = <0x80054000 0x2000>;
1148 interrupts = <45>;
1149 dmas = <&dma_apbx 2>;
1150 dma-names = "tx";
1151 status = "disabled";
1152 };
1153
1154 mxs_rtc: rtc@80056000 {
1155 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1156 reg = <0x80056000 0x2000>;
1157 interrupts = <29>;
1158 };
1159
1160 i2c0: i2c@80058000 {
1161 #address-cells = <1>;
1162 #size-cells = <0>;
1163 compatible = "fsl,imx28-i2c";
1164 reg = <0x80058000 0x2000>;
1165 interrupts = <111>;
1166 clock-frequency = <100000>;
1167 dmas = <&dma_apbx 6>;
1168 dma-names = "rx-tx";
1169 status = "disabled";
1170 };
1171
1172 i2c1: i2c@8005a000 {
1173 #address-cells = <1>;
1174 #size-cells = <0>;
1175 compatible = "fsl,imx28-i2c";
1176 reg = <0x8005a000 0x2000>;
1177 interrupts = <110>;
1178 clock-frequency = <100000>;
1179 dmas = <&dma_apbx 7>;
1180 dma-names = "rx-tx";
1181 status = "disabled";
1182 };
1183
1184 pwm: pwm@80064000 {
1185 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1186 reg = <0x80064000 0x2000>;
1187 clocks = <&clks 44>;
1188 #pwm-cells = <3>;
1189 fsl,pwm-number = <8>;
1190 status = "disabled";
1191 };
1192
1193 timer: timrot@80068000 {
1194 compatible = "fsl,imx28-timrot", "fsl,timrot";
1195 reg = <0x80068000 0x2000>;
1196 interrupts = <48>, <49>, <50>, <51>;
1197 clocks = <&clks 26>;
1198 };
1199
1200 auart0: serial@8006a000 {
1201 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1202 reg = <0x8006a000 0x2000>;
1203 interrupts = <112>;
1204 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1205 dma-names = "rx", "tx";
1206 clocks = <&clks 45>;
1207 status = "disabled";
1208 };
1209
1210 auart1: serial@8006c000 {
1211 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1212 reg = <0x8006c000 0x2000>;
1213 interrupts = <113>;
1214 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1215 dma-names = "rx", "tx";
1216 clocks = <&clks 45>;
1217 status = "disabled";
1218 };
1219
1220 auart2: serial@8006e000 {
1221 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1222 reg = <0x8006e000 0x2000>;
1223 interrupts = <114>;
1224 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1225 dma-names = "rx", "tx";
1226 clocks = <&clks 45>;
1227 status = "disabled";
1228 };
1229
1230 auart3: serial@80070000 {
1231 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1232 reg = <0x80070000 0x2000>;
1233 interrupts = <115>;
1234 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1235 dma-names = "rx", "tx";
1236 clocks = <&clks 45>;
1237 status = "disabled";
1238 };
1239
1240 auart4: serial@80072000 {
1241 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1242 reg = <0x80072000 0x2000>;
1243 interrupts = <116>;
1244 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1245 dma-names = "rx", "tx";
1246 clocks = <&clks 45>;
1247 status = "disabled";
1248 };
1249
1250 duart: serial@80074000 {
1251 compatible = "arm,pl011", "arm,primecell";
1252 reg = <0x80074000 0x1000>;
1253 interrupts = <47>;
1254 clocks = <&clks 45>, <&clks 26>;
1255 clock-names = "uartclk", "apb_pclk";
1256 status = "disabled";
1257 };
1258
1259 usbphy0: usbphy@8007c000 {
1260 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1261 reg = <0x8007c000 0x2000>;
1262 clocks = <&clks 62>;
1263 status = "disabled";
1264 };
1265
1266 usbphy1: usbphy@8007e000 {
1267 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1268 reg = <0x8007e000 0x2000>;
1269 clocks = <&clks 63>;
1270 status = "disabled";
1271 };
1272 };
1273 };
1274
1275 ahb@80080000 {
1276 compatible = "simple-bus";
1277 #address-cells = <1>;
1278 #size-cells = <1>;
1279 reg = <0x80080000 0x80000>;
1280 ranges;
1281
1282 usb0: usb@80080000 {
1283 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1284 reg = <0x80080000 0x10000>;
1285 interrupts = <93>;
1286 clocks = <&clks 60>;
1287 fsl,usbphy = <&usbphy0>;
1288 status = "disabled";
1289 };
1290
1291 usb1: usb@80090000 {
1292 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1293 reg = <0x80090000 0x10000>;
1294 interrupts = <92>;
1295 clocks = <&clks 61>;
1296 fsl,usbphy = <&usbphy1>;
1297 dr_mode = "host";
1298 status = "disabled";
1299 };
1300
1301 dflpt: dflpt@800c0000 {
1302 reg = <0x800c0000 0x10000>;
1303 status = "disabled";
1304 };
1305
1306 mac0: ethernet@800f0000 {
1307 compatible = "fsl,imx28-fec";
1308 reg = <0x800f0000 0x4000>;
1309 interrupts = <101>;
1310 clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1311 clock-names = "ipg", "ahb", "enet_out";
1312 status = "disabled";
1313 };
1314
1315 mac1: ethernet@800f4000 {
1316 compatible = "fsl,imx28-fec";
1317 reg = <0x800f4000 0x4000>;
1318 interrupts = <102>;
1319 clocks = <&clks 57>, <&clks 57>;
1320 clock-names = "ipg", "ahb";
1321 status = "disabled";
1322 };
1323
1324 eth_switch: switch@800f8000 {
1325 reg = <0x800f8000 0x8000>;
1326 status = "disabled";
1327 };
1328 };
1329
1330 iio-hwmon {
1331 compatible = "iio-hwmon";
1332 io-channels = <&lradc 8>;
1333 };
1334 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.