1 // SPDX-License-Identifier: BSD-3-Clause
2
3 /dts-v1/;
4
5 #include "qcom-msm8226.dtsi"
6 #include "pm8226.dtsi"
7
8 /delete-node/ &smem_region;
9
10 / {
11 model = "Motorola Moto G (2013)";
12 compatible = "motorola,falcon", "qcom,msm8226";
13 chassis-type = "handset";
14
15 aliases {
16 mmc0 = &sdhc_1;
17 };
18
19 chosen {
20 #address-cells = <1>;
21 #size-cells = <1>;
22 ranges;
23
24 framebuffer@3200000 {
25 compatible = "simple-framebuffer";
26 reg = <0x03200000 0x800000>;
27 width = <720>;
28 height = <1280>;
29 stride = <(720 * 3)>;
30 format = "r8g8b8";
31 vsp-supply = <®_lcd_pos>;
32 vsn-supply = <®_lcd_neg>;
33 vddio-supply = <&vddio_disp_vreg>;
34 };
35 };
36
37 gpio-keys {
38 compatible = "gpio-keys";
39
40 event-hall-sensor {
41 label = "Hall Effect Sensor";
42 gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
43 linux,input-type = <EV_SW>;
44 linux,code = <SW_LID>;
45 linux,can-disable;
46 };
47
48 key-volume-up {
49 label = "Volume Up";
50 gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_VOLUMEUP>;
52 debounce-interval = <15>;
53 };
54 };
55
56 vddio_disp_vreg: regulator-vddio-disp {
57 compatible = "regulator-fixed";
58 regulator-name = "vddio_disp";
59 gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
60 vin-supply = <&pm8226_l8>;
61 startup-delay-us = <300>;
62 enable-active-high;
63 regulator-boot-on;
64 };
65
66 reserved-memory {
67 #address-cells = <1>;
68 #size-cells = <1>;
69 ranges;
70
71 framebuffer@3200000 {
72 reg = <0x03200000 0x800000>;
73 no-map;
74 };
75
76 dhob@f500000 {
77 reg = <0x0f500000 0x40000>;
78 no-map;
79 };
80
81 shob@f540000 {
82 reg = <0x0f540000 0x2000>;
83 no-map;
84 };
85
86 smem_region: smem@fa00000 {
87 reg = <0x0fa00000 0x100000>;
88 no-map;
89 };
90
91 /* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
92 reserved@fb00000 {
93 reg = <0x0fb00000 0x400000>;
94 no-map;
95 };
96 };
97 };
98
99 &blsp1_i2c2 {
100 status = "okay";
101
102 magnetometer@c {
103 compatible = "asahi-kasei,ak8963";
104 reg = <0xc>;
105 interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
106 reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
107 vdd-supply = <&pm8226_l19>;
108 vid-supply = <&pm8226_lvs1>;
109 pinctrl-0 = <&mag_int_default &mag_reset_default>;
110 pinctrl-names = "default";
111 };
112
113 accelerometer@19 {
114 compatible = "st,lis3dh-accel";
115 reg = <0x19>;
116 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
117 vdd-supply = <&pm8226_l19>;
118 vddio-supply = <&pm8226_lvs1>;
119 pinctrl-0 = <&accel_int_default>;
120 pinctrl-names = "default";
121 mount-matrix = "0", "1", "0",
122 "1", "0", "0",
123 "0", "0", "-1";
124 st,drdy-int-pin = <1>;
125 };
126 };
127
128 &blsp1_i2c3 {
129 status = "okay";
130
131 regulator@3e {
132 compatible = "ti,tps65132";
133 reg = <0x3e>;
134 pinctrl-0 = <®_lcd_default>;
135 pinctrl-names = "default";
136
137 reg_lcd_pos: outp {
138 regulator-name = "outp";
139 regulator-min-microvolt = <4000000>;
140 regulator-max-microvolt = <6000000>;
141 regulator-active-discharge = <1>;
142 regulator-boot-on;
143 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
144 };
145
146 reg_lcd_neg: outn {
147 regulator-name = "outn";
148 regulator-min-microvolt = <4000000>;
149 regulator-max-microvolt = <6000000>;
150 regulator-active-discharge = <1>;
151 regulator-boot-on;
152 enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
153 };
154 };
155
156 temperature-sensor@48 {
157 compatible = "ti,tmp108";
158 reg = <0x48>;
159 interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
160 pinctrl-0 = <&temp_alert_default>;
161 pinctrl-names = "default";
162 #thermal-sensor-cells = <0>;
163 };
164 };
165
166 &pm8226_resin {
167 linux,code = <KEY_VOLUMEDOWN>;
168 status = "okay";
169 };
170
171 &pm8226_vib {
172 status = "okay";
173 };
174
175 &rpm_requests {
176 regulators {
177 compatible = "qcom,rpm-pm8226-regulators";
178
179 pm8226_s3: s3 {
180 regulator-min-microvolt = <1200000>;
181 regulator-max-microvolt = <1300000>;
182 };
183
184 pm8226_s4: s4 {
185 regulator-min-microvolt = <1800000>;
186 regulator-max-microvolt = <2200000>;
187 };
188
189 pm8226_s5: s5 {
190 regulator-min-microvolt = <1150000>;
191 regulator-max-microvolt = <1150000>;
192 };
193
194 pm8226_l1: l1 {
195 regulator-min-microvolt = <1225000>;
196 regulator-max-microvolt = <1225000>;
197 };
198
199 pm8226_l2: l2 {
200 regulator-min-microvolt = <1200000>;
201 regulator-max-microvolt = <1200000>;
202 };
203
204 pm8226_l3: l3 {
205 regulator-min-microvolt = <750000>;
206 regulator-max-microvolt = <1337500>;
207 };
208
209 pm8226_l4: l4 {
210 regulator-min-microvolt = <1200000>;
211 regulator-max-microvolt = <1200000>;
212 };
213
214 pm8226_l5: l5 {
215 regulator-min-microvolt = <1200000>;
216 regulator-max-microvolt = <1200000>;
217 };
218
219 pm8226_l6: l6 {
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
222 regulator-allow-set-load;
223 };
224
225 pm8226_l7: l7 {
226 regulator-min-microvolt = <1850000>;
227 regulator-max-microvolt = <1850000>;
228 };
229
230 pm8226_l8: l8 {
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
233 };
234
235 pm8226_l9: l9 {
236 regulator-min-microvolt = <2050000>;
237 regulator-max-microvolt = <2050000>;
238 };
239
240 pm8226_l10: l10 {
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
243 };
244
245 pm8226_l12: l12 {
246 regulator-min-microvolt = <1800000>;
247 regulator-max-microvolt = <1800000>;
248 };
249
250 pm8226_l14: l14 {
251 regulator-min-microvolt = <2750000>;
252 regulator-max-microvolt = <2750000>;
253 };
254
255 pm8226_l15: l15 {
256 regulator-min-microvolt = <2800000>;
257 regulator-max-microvolt = <2800000>;
258 };
259
260 pm8226_l16: l16 {
261 regulator-min-microvolt = <3000000>;
262 regulator-max-microvolt = <3350000>;
263 };
264
265 pm8226_l17: l17 {
266 regulator-min-microvolt = <2950000>;
267 regulator-max-microvolt = <2950000>;
268 };
269
270 pm8226_l18: l18 {
271 regulator-min-microvolt = <2950000>;
272 regulator-max-microvolt = <2950000>;
273 };
274
275 pm8226_l19: l19 {
276 regulator-min-microvolt = <2850000>;
277 regulator-max-microvolt = <2850000>;
278 };
279
280 pm8226_l20: l20 {
281 regulator-min-microvolt = <3075000>;
282 regulator-max-microvolt = <3075000>;
283 };
284
285 pm8226_l21: l21 {
286 regulator-min-microvolt = <1800000>;
287 regulator-max-microvolt = <2950000>;
288 regulator-allow-set-load;
289 };
290
291 pm8226_l22: l22 {
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <2950000>;
294 };
295
296 pm8226_l23: l23 {
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <2950000>;
299 };
300
301 pm8226_l24: l24 {
302 regulator-min-microvolt = <1300000>;
303 regulator-max-microvolt = <1350000>;
304 };
305
306 pm8226_l25: l25 {
307 regulator-min-microvolt = <1775000>;
308 regulator-max-microvolt = <2125000>;
309 };
310
311 pm8226_l26: l26 {
312 regulator-min-microvolt = <1225000>;
313 regulator-max-microvolt = <1225000>;
314 };
315
316 pm8226_l27: l27 {
317 regulator-min-microvolt = <2050000>;
318 regulator-max-microvolt = <2050000>;
319 };
320
321 pm8226_l28: l28 {
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <3400000>;
324 regulator-boot-on;
325 };
326
327 pm8226_lvs1: lvs1 {
328 regulator-always-on;
329 };
330 };
331 };
332
333 &sdhc_1 {
334 vmmc-supply = <&pm8226_l17>;
335 vqmmc-supply = <&pm8226_l6>;
336
337 bus-width = <8>;
338 non-removable;
339
340 status = "okay";
341 };
342
343 &smbb {
344 qcom,fast-charge-safe-current = <2000000>;
345 qcom,fast-charge-current-limit = <1900000>;
346 qcom,fast-charge-safe-voltage = <4400000>;
347 qcom,minimum-input-voltage = <4300000>;
348
349 status = "okay";
350 };
351
352 &tlmm {
353 accel_int_default: accel-int-default-state {
354 pins = "gpio63";
355 function = "gpio";
356 drive-strength = <2>;
357 bias-disable;
358 output-disable;
359 };
360
361 mag_int_default: mag-int-default-state {
362 pins = "gpio66";
363 function = "gpio";
364 drive-strength = <2>;
365 bias-disable;
366 output-disable;
367 };
368
369 mag_reset_default: mag-reset-default-state {
370 pins = "gpio62";
371 function = "gpio";
372 drive-strength = <2>;
373 bias-disable;
374 output-high;
375 };
376
377 reg_lcd_default: reg-lcd-default-state {
378 pins = "gpio31", "gpio33";
379 function = "gpio";
380 drive-strength = <2>;
381 bias-disable;
382 output-high;
383 };
384
385 reg_vddio_disp_default: reg-vddio-disp-default-state {
386 pins = "gpio34";
387 function = "gpio";
388 drive-strength = <2>;
389 bias-disable;
390 output-high;
391 };
392
393 temp_alert_default: temp-alert-default-state {
394 pins = "gpio13";
395 function = "gpio";
396 drive-strength = <2>;
397 bias-disable;
398 output-disable;
399 };
400 };
401
402 &usb {
403 extcon = <&smbb>;
404 dr_mode = "peripheral";
405 status = "okay";
406 };
407
408 &usb_hs_phy {
409 extcon = <&smbb>;
410 v1p8-supply = <&pm8226_l10>;
411 v3p3-supply = <&pm8226_l20>;
412 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.