1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
6 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
7 #include <dt-bindings/clock/qcom,lcc-msm8960.h>
8 #include <dt-bindings/mfd/qcom-rpm.h>
9 #include <dt-bindings/soc/qcom,gsbi.h>
10
11 / {
12 #address-cells = <1>;
13 #size-cells = <1>;
14 model = "Qualcomm MSM8960";
15 compatible = "qcom,msm8960";
16 interrupt-parent = <&intc>;
17
18 cpus {
19 #address-cells = <1>;
20 #size-cells = <0>;
21 interrupts = <GIC_PPI 14 0x304>;
22
23 cpu@0 {
24 compatible = "qcom,krait";
25 enable-method = "qcom,kpss-acc-v1";
26 device_type = "cpu";
27 reg = <0>;
28 next-level-cache = <&L2>;
29 qcom,acc = <&acc0>;
30 qcom,saw = <&saw0>;
31 };
32
33 cpu@1 {
34 compatible = "qcom,krait";
35 enable-method = "qcom,kpss-acc-v1";
36 device_type = "cpu";
37 reg = <1>;
38 next-level-cache = <&L2>;
39 qcom,acc = <&acc1>;
40 qcom,saw = <&saw1>;
41 };
42
43 L2: l2-cache {
44 compatible = "cache";
45 cache-level = <2>;
46 cache-unified;
47 };
48 };
49
50 memory@80000000 {
51 device_type = "memory";
52 reg = <0x80000000 0>;
53 };
54
55 cpu-pmu {
56 compatible = "qcom,krait-pmu";
57 interrupts = <GIC_PPI 10 0x304>;
58 qcom,no-pc-write;
59 };
60
61 clocks {
62 cxo_board: cxo_board {
63 compatible = "fixed-clock";
64 #clock-cells = <0>;
65 clock-frequency = <19200000>;
66 clock-output-names = "cxo_board";
67 };
68
69 pxo_board: pxo_board {
70 compatible = "fixed-clock";
71 #clock-cells = <0>;
72 clock-frequency = <27000000>;
73 clock-output-names = "pxo_board";
74 };
75
76 sleep_clk: sleep_clk {
77 compatible = "fixed-clock";
78 #clock-cells = <0>;
79 clock-frequency = <32768>;
80 clock-output-names = "sleep_clk";
81 };
82 };
83
84 /* Temporary fixed regulator */
85 vsdcc_fixed: vsdcc-regulator {
86 compatible = "regulator-fixed";
87 regulator-name = "SDCC Power";
88 regulator-min-microvolt = <2700000>;
89 regulator-max-microvolt = <2700000>;
90 regulator-always-on;
91 };
92
93 soc: soc {
94 #address-cells = <1>;
95 #size-cells = <1>;
96 ranges;
97 compatible = "simple-bus";
98
99 intc: interrupt-controller@2000000 {
100 compatible = "qcom,msm-qgic2";
101 interrupt-controller;
102 #interrupt-cells = <3>;
103 reg = <0x02000000 0x1000>,
104 <0x02002000 0x1000>;
105 };
106
107 timer@200a000 {
108 compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
109 "qcom,msm-timer";
110 interrupts = <GIC_PPI 1 0x301>,
111 <GIC_PPI 2 0x301>,
112 <GIC_PPI 3 0x301>;
113 reg = <0x0200a000 0x100>;
114 clock-frequency = <27000000>;
115 cpu-offset = <0x80000>;
116 };
117
118 msmgpio: pinctrl@800000 {
119 compatible = "qcom,msm8960-pinctrl";
120 gpio-controller;
121 gpio-ranges = <&msmgpio 0 0 152>;
122 #gpio-cells = <2>;
123 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
124 interrupt-controller;
125 #interrupt-cells = <2>;
126 reg = <0x800000 0x4000>;
127 };
128
129 gcc: clock-controller@900000 {
130 compatible = "qcom,gcc-msm8960";
131 #clock-cells = <1>;
132 #reset-cells = <1>;
133 reg = <0x900000 0x4000>;
134 clocks = <&cxo_board>,
135 <&pxo_board>,
136 <&lcc PLL4>;
137 clock-names = "cxo", "pxo", "pll4";
138 };
139
140 lcc: clock-controller@28000000 {
141 compatible = "qcom,lcc-msm8960";
142 reg = <0x28000000 0x1000>;
143 #clock-cells = <1>;
144 #reset-cells = <1>;
145 clocks = <&pxo_board>,
146 <&gcc PLL4_VOTE>,
147 <0>,
148 <0>, <0>,
149 <0>, <0>,
150 <0>;
151 clock-names = "pxo",
152 "pll4_vote",
153 "mi2s_codec_clk",
154 "codec_i2s_mic_codec_clk",
155 "spare_i2s_mic_codec_clk",
156 "codec_i2s_spkr_codec_clk",
157 "spare_i2s_spkr_codec_clk",
158 "pcm_codec_clk";
159 };
160
161 clock-controller@4000000 {
162 compatible = "qcom,mmcc-msm8960";
163 reg = <0x4000000 0x1000>;
164 #clock-cells = <1>;
165 #power-domain-cells = <1>;
166 #reset-cells = <1>;
167 clocks = <&pxo_board>,
168 <&gcc PLL3>,
169 <&gcc PLL8_VOTE>,
170 <0>,
171 <0>,
172 <0>,
173 <0>,
174 <0>;
175 clock-names = "pxo",
176 "pll3",
177 "pll8_vote",
178 "dsi1pll",
179 "dsi1pllbyte",
180 "dsi2pll",
181 "dsi2pllbyte",
182 "hdmipll";
183 };
184
185 l2cc: clock-controller@2011000 {
186 compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
187 reg = <0x2011000 0x1000>;
188 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
189 clock-names = "pll8_vote", "pxo";
190 #clock-cells = <0>;
191 };
192
193 rpm: rpm@108000 {
194 compatible = "qcom,rpm-msm8960";
195 reg = <0x108000 0x1000>;
196 qcom,ipc = <&l2cc 0x8 2>;
197
198 interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
199 <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
200 <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
201 interrupt-names = "ack", "err", "wakeup";
202 };
203
204 acc0: clock-controller@2088000 {
205 compatible = "qcom,kpss-acc-v1";
206 reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
207 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
208 clock-names = "pll8_vote", "pxo";
209 clock-output-names = "acpu0_aux";
210 #clock-cells = <0>;
211 };
212
213 acc1: clock-controller@2098000 {
214 compatible = "qcom,kpss-acc-v1";
215 reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
216 clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
217 clock-names = "pll8_vote", "pxo";
218 clock-output-names = "acpu1_aux";
219 #clock-cells = <0>;
220 };
221
222 saw0: power-manager@2089000 {
223 compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
224 reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
225
226 saw0_vreg: regulator {
227 regulator-min-microvolt = <850000>;
228 regulator-max-microvolt = <1300000>;
229 };
230 };
231
232 saw1: power-manager@2099000 {
233 compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
234 reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
235
236 saw1_vreg: regulator {
237 regulator-min-microvolt = <850000>;
238 regulator-max-microvolt = <1300000>;
239 };
240 };
241
242 gsbi5: gsbi@16400000 {
243 compatible = "qcom,gsbi-v1.0.0";
244 cell-index = <5>;
245 reg = <0x16400000 0x100>;
246 clocks = <&gcc GSBI5_H_CLK>;
247 clock-names = "iface";
248 #address-cells = <1>;
249 #size-cells = <1>;
250 ranges;
251
252 syscon-tcsr = <&tcsr>;
253
254 gsbi5_serial: serial@16440000 {
255 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
256 reg = <0x16440000 0x1000>,
257 <0x16400000 0x1000>;
258 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
259 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
260 clock-names = "core", "iface";
261 status = "disabled";
262 };
263 };
264
265 ssbi: ssbi@500000 {
266 compatible = "qcom,ssbi";
267 reg = <0x500000 0x1000>;
268 qcom,controller-type = "pmic-arbiter";
269 };
270
271 rng@1a500000 {
272 compatible = "qcom,prng";
273 reg = <0x1a500000 0x200>;
274 clocks = <&gcc PRNG_CLK>;
275 clock-names = "core";
276 };
277
278 sdcc3: mmc@12180000 {
279 compatible = "arm,pl18x", "arm,primecell";
280 arm,primecell-periphid = <0x00051180>;
281 status = "disabled";
282 reg = <0x12180000 0x8000>;
283 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
284 clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
285 clock-names = "mclk", "apb_pclk";
286 bus-width = <4>;
287 cap-sd-highspeed;
288 cap-mmc-highspeed;
289 max-frequency = <192000000>;
290 no-1-8-v;
291 vmmc-supply = <&vsdcc_fixed>;
292 };
293
294 sdcc1: mmc@12400000 {
295 status = "disabled";
296 compatible = "arm,pl18x", "arm,primecell";
297 arm,primecell-periphid = <0x00051180>;
298 reg = <0x12400000 0x8000>;
299 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
300 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
301 clock-names = "mclk", "apb_pclk";
302 bus-width = <8>;
303 max-frequency = <96000000>;
304 non-removable;
305 cap-sd-highspeed;
306 cap-mmc-highspeed;
307 vmmc-supply = <&vsdcc_fixed>;
308 };
309
310 tcsr: syscon@1a400000 {
311 compatible = "qcom,tcsr-msm8960", "syscon";
312 reg = <0x1a400000 0x100>;
313 };
314
315 gsbi1: gsbi@16000000 {
316 compatible = "qcom,gsbi-v1.0.0";
317 cell-index = <1>;
318 reg = <0x16000000 0x100>;
319 clocks = <&gcc GSBI1_H_CLK>;
320 clock-names = "iface";
321 #address-cells = <1>;
322 #size-cells = <1>;
323 ranges;
324
325 gsbi1_spi: spi@16080000 {
326 compatible = "qcom,spi-qup-v1.1.1";
327 #address-cells = <1>;
328 #size-cells = <0>;
329 reg = <0x16080000 0x1000>;
330 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
331 cs-gpios = <&msmgpio 8 0>;
332
333 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
334 clock-names = "core", "iface";
335 status = "disabled";
336 };
337 };
338
339 usb1: usb@12500000 {
340 compatible = "qcom,ci-hdrc";
341 reg = <0x12500000 0x200>,
342 <0x12500200 0x200>;
343 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
344 clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
345 clock-names = "core", "iface";
346 assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
347 assigned-clock-rates = <60000000>;
348 resets = <&gcc USB_HS1_RESET>;
349 reset-names = "core";
350 phy_type = "ulpi";
351 ahb-burst-config = <0>;
352 phys = <&usb_hs1_phy>;
353 phy-names = "usb-phy";
354 #reset-cells = <1>;
355 status = "disabled";
356
357 ulpi {
358 usb_hs1_phy: phy {
359 compatible = "qcom,usb-hs-phy-msm8960",
360 "qcom,usb-hs-phy";
361 clocks = <&sleep_clk>, <&cxo_board>;
362 clock-names = "sleep", "ref";
363 resets = <&usb1 0>;
364 reset-names = "por";
365 #phy-cells = <0>;
366 };
367 };
368 };
369
370 gsbi3: gsbi@16200000 {
371 compatible = "qcom,gsbi-v1.0.0";
372 reg = <0x16200000 0x100>;
373 ranges;
374 cell-index = <3>;
375 clocks = <&gcc GSBI3_H_CLK>;
376 clock-names = "iface";
377 #address-cells = <1>;
378 #size-cells = <1>;
379 status = "disabled";
380
381 gsbi3_i2c: i2c@16280000 {
382 compatible = "qcom,i2c-qup-v1.1.1";
383 reg = <0x16280000 0x1000>;
384 pinctrl-0 = <&i2c3_default_state>;
385 pinctrl-1 = <&i2c3_sleep_state>;
386 pinctrl-names = "default", "sleep";
387 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
388 clocks = <&gcc GSBI3_QUP_CLK>,
389 <&gcc GSBI3_H_CLK>;
390 clock-names = "core", "iface";
391 #address-cells = <1>;
392 #size-cells = <0>;
393 status = "disabled";
394 };
395 };
396 };
397 };
398 #include "qcom-msm8960-pins.dtsi"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.