1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Device Tree Source for the Koelsch board
4 *
5 * Copyright (C) 2013 Renesas Electronics Corporation
6 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2014 Cogent Embedded, Inc.
8 */
9
10 /*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 * 2: CN22
15 * 3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 * amixer set "LINEOUT Mixer DACL" on
20 * amixer set "DVC Out" 100%
21 * amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 * amixer set "DVC Out Mute" on
26 * amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
31 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 * amixer set "DVC Out Ramp" on
33 * aplay xxx.wav &
34 * amixer set "DVC Out" 80% // Volume Down
35 * amixer set "DVC Out" 100% // Volume Up
36 */
37
38 /dts-v1/;
39 #include "r8a7791.dtsi"
40 #include <dt-bindings/gpio/gpio.h>
41 #include <dt-bindings/input/input.h>
42
43 / {
44 model = "Koelsch";
45 compatible = "renesas,koelsch", "renesas,r8a7791";
46
47 aliases {
48 serial0 = &scif0;
49 serial1 = &scif1;
50 i2c9 = &gpioi2c1;
51 i2c10 = &gpioi2c2;
52 i2c11 = &gpioi2c4;
53 i2c12 = &i2cexio1;
54 i2c13 = &i2chdmi;
55 i2c14 = &i2cexio4;
56 mmc0 = &sdhi0;
57 mmc1 = &sdhi1;
58 mmc2 = &sdhi2;
59 };
60
61 chosen {
62 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
63 stdout-path = "serial0:115200n8";
64 };
65
66 memory@40000000 {
67 device_type = "memory";
68 reg = <0 0x40000000 0 0x40000000>;
69 };
70
71 memory@200000000 {
72 device_type = "memory";
73 reg = <2 0x00000000 0 0x40000000>;
74 };
75
76 keyboard {
77 compatible = "gpio-keys";
78
79 pinctrl-0 = <&keyboard_pins>;
80 pinctrl-names = "default";
81
82 key-1 {
83 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
84 linux,code = <KEY_1>;
85 label = "SW2-1";
86 wakeup-source;
87 debounce-interval = <20>;
88 };
89 key-2 {
90 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
91 linux,code = <KEY_2>;
92 label = "SW2-2";
93 wakeup-source;
94 debounce-interval = <20>;
95 };
96 key-3 {
97 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
98 linux,code = <KEY_3>;
99 label = "SW2-3";
100 wakeup-source;
101 debounce-interval = <20>;
102 };
103 key-4 {
104 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
105 linux,code = <KEY_4>;
106 label = "SW2-4";
107 wakeup-source;
108 debounce-interval = <20>;
109 };
110 key-a {
111 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
112 linux,code = <KEY_A>;
113 label = "SW30";
114 wakeup-source;
115 debounce-interval = <20>;
116 };
117 key-b {
118 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
119 linux,code = <KEY_B>;
120 label = "SW31";
121 wakeup-source;
122 debounce-interval = <20>;
123 };
124 key-c {
125 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
126 linux,code = <KEY_C>;
127 label = "SW32";
128 wakeup-source;
129 debounce-interval = <20>;
130 };
131 key-d {
132 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
133 linux,code = <KEY_D>;
134 label = "SW33";
135 wakeup-source;
136 debounce-interval = <20>;
137 };
138 key-e {
139 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
140 linux,code = <KEY_E>;
141 label = "SW34";
142 wakeup-source;
143 debounce-interval = <20>;
144 };
145 key-f {
146 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
147 linux,code = <KEY_F>;
148 label = "SW35";
149 wakeup-source;
150 debounce-interval = <20>;
151 };
152 key-g {
153 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
154 linux,code = <KEY_G>;
155 label = "SW36";
156 wakeup-source;
157 debounce-interval = <20>;
158 };
159 };
160
161 leds {
162 compatible = "gpio-leds";
163 led6 {
164 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
165 label = "LED6";
166 };
167 led7 {
168 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
169 label = "LED7";
170 };
171 led8 {
172 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
173 label = "LED8";
174 };
175 };
176
177 reg_1p8v: regulator-1v8 {
178 compatible = "regulator-fixed";
179 regulator-name = "fixed-1.8V";
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <1800000>;
182 regulator-boot-on;
183 regulator-always-on;
184 };
185
186 reg_3p3v: regulator-3v3 {
187 compatible = "regulator-fixed";
188 regulator-name = "fixed-3.3V";
189 regulator-min-microvolt = <3300000>;
190 regulator-max-microvolt = <3300000>;
191 regulator-boot-on;
192 regulator-always-on;
193 };
194
195 vcc_sdhi0: regulator-vcc-sdhi0 {
196 compatible = "regulator-fixed";
197
198 regulator-name = "SDHI0 Vcc";
199 regulator-min-microvolt = <3300000>;
200 regulator-max-microvolt = <3300000>;
201
202 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
203 enable-active-high;
204 };
205
206 vccq_sdhi0: regulator-vccq-sdhi0 {
207 compatible = "regulator-gpio";
208
209 regulator-name = "SDHI0 VccQ";
210 regulator-min-microvolt = <1800000>;
211 regulator-max-microvolt = <3300000>;
212
213 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
214 gpios-states = <1>;
215 states = <3300000 1>, <1800000 0>;
216 };
217
218 vcc_sdhi1: regulator-vcc-sdhi1 {
219 compatible = "regulator-fixed";
220
221 regulator-name = "SDHI1 Vcc";
222 regulator-min-microvolt = <3300000>;
223 regulator-max-microvolt = <3300000>;
224
225 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
226 enable-active-high;
227 };
228
229 vccq_sdhi1: regulator-vccq-sdhi1 {
230 compatible = "regulator-gpio";
231
232 regulator-name = "SDHI1 VccQ";
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <3300000>;
235
236 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
237 gpios-states = <1>;
238 states = <3300000 1>, <1800000 0>;
239 };
240
241 vcc_sdhi2: regulator-vcc-sdhi2 {
242 compatible = "regulator-fixed";
243
244 regulator-name = "SDHI2 Vcc";
245 regulator-min-microvolt = <3300000>;
246 regulator-max-microvolt = <3300000>;
247
248 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
249 enable-active-high;
250 };
251
252 vccq_sdhi2: regulator-vccq-sdhi2 {
253 compatible = "regulator-gpio";
254
255 regulator-name = "SDHI2 VccQ";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <3300000>;
258
259 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
260 gpios-states = <1>;
261 states = <3300000 1>, <1800000 0>;
262 };
263
264 audio_clock: audio_clock {
265 compatible = "fixed-clock";
266 #clock-cells = <0>;
267 clock-frequency = <11289600>;
268 };
269
270 rsnd_ak4643: sound {
271 compatible = "simple-audio-card";
272
273 simple-audio-card,format = "left_j";
274 simple-audio-card,bitclock-master = <&sndcodec>;
275 simple-audio-card,frame-master = <&sndcodec>;
276
277 sndcpu: simple-audio-card,cpu {
278 sound-dai = <&rcar_sound>;
279 };
280
281 sndcodec: simple-audio-card,codec {
282 sound-dai = <&ak4643>;
283 clocks = <&audio_clock>;
284 };
285 };
286
287 hdmi-in {
288 compatible = "hdmi-connector";
289 type = "a";
290
291 port {
292 hdmi_con_in: endpoint {
293 remote-endpoint = <&adv7612_in>;
294 };
295 };
296 };
297
298 cec_clock: cec-clock {
299 compatible = "fixed-clock";
300 #clock-cells = <0>;
301 clock-frequency = <12000000>;
302 };
303
304 hdmi-out {
305 compatible = "hdmi-connector";
306 type = "a";
307
308 port {
309 hdmi_con_out: endpoint {
310 remote-endpoint = <&adv7511_out>;
311 };
312 };
313 };
314
315 x2_clk: x2-clock {
316 compatible = "fixed-clock";
317 #clock-cells = <0>;
318 clock-frequency = <74250000>;
319 };
320
321 x13_clk: x13-clock {
322 compatible = "fixed-clock";
323 #clock-cells = <0>;
324 clock-frequency = <148500000>;
325 };
326
327 gpioi2c1: i2c-9 {
328 #address-cells = <1>;
329 #size-cells = <0>;
330 compatible = "i2c-gpio";
331 status = "disabled";
332 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
333 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
334 i2c-gpio,delay-us = <5>;
335 };
336
337 gpioi2c2: i2c-10 {
338 #address-cells = <1>;
339 #size-cells = <0>;
340 compatible = "i2c-gpio";
341 status = "disabled";
342 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
343 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
344 i2c-gpio,delay-us = <5>;
345 };
346
347 gpioi2c4: i2c-11 {
348 #address-cells = <1>;
349 #size-cells = <0>;
350 compatible = "i2c-gpio";
351 status = "disabled";
352 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
353 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
354 i2c-gpio,delay-us = <5>;
355 };
356
357 /*
358 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
359 * A fallback to GPIO is provided.
360 */
361 i2cexio1: i2c-mux1 {
362 compatible = "i2c-demux-pinctrl";
363 i2c-parent = <&i2c1>, <&gpioi2c1>;
364 i2c-bus-name = "i2c-exio1";
365 #address-cells = <1>;
366 #size-cells = <0>;
367 };
368
369 /*
370 * A fallback to GPIO is provided for I2C2.
371 */
372 i2chdmi: i2c-mux2 {
373 compatible = "i2c-demux-pinctrl";
374 i2c-parent = <&i2c2>, <&gpioi2c2>;
375 i2c-bus-name = "i2c-hdmi";
376 #address-cells = <1>;
377 #size-cells = <0>;
378
379 ak4643: codec@12 {
380 compatible = "asahi-kasei,ak4643";
381 #sound-dai-cells = <0>;
382 reg = <0x12>;
383 };
384
385 composite-in@20 {
386 compatible = "adi,adv7180";
387 reg = <0x20>;
388
389 port {
390 adv7180: endpoint {
391 bus-width = <8>;
392 remote-endpoint = <&vin1ep>;
393 };
394 };
395 };
396
397 hdmi@39 {
398 compatible = "adi,adv7511w";
399 reg = <0x39>;
400 interrupt-parent = <&gpio3>;
401 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
402 clocks = <&cec_clock>;
403 clock-names = "cec";
404
405 avdd-supply = <®_1p8v>;
406 dvdd-supply = <®_1p8v>;
407 pvdd-supply = <®_1p8v>;
408 dvdd-3v-supply = <®_3p3v>;
409 bgvdd-supply = <®_1p8v>;
410
411 adi,input-depth = <8>;
412 adi,input-colorspace = "rgb";
413 adi,input-clock = "1x";
414
415 ports {
416 #address-cells = <1>;
417 #size-cells = <0>;
418
419 port@0 {
420 reg = <0>;
421 adv7511_in: endpoint {
422 remote-endpoint = <&du_out_rgb>;
423 };
424 };
425
426 port@1 {
427 reg = <1>;
428 adv7511_out: endpoint {
429 remote-endpoint = <&hdmi_con_out>;
430 };
431 };
432 };
433 };
434
435 hdmi-in@4c {
436 compatible = "adi,adv7612";
437 reg = <0x4c>;
438 interrupt-parent = <&gpio4>;
439 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
440 default-input = <0>;
441
442 ports {
443 #address-cells = <1>;
444 #size-cells = <0>;
445
446 port@0 {
447 reg = <0>;
448 adv7612_in: endpoint {
449 remote-endpoint = <&hdmi_con_in>;
450 };
451 };
452
453 port@2 {
454 reg = <2>;
455 adv7612_out: endpoint {
456 remote-endpoint = <&vin0ep2>;
457 };
458 };
459 };
460 };
461
462 eeprom@50 {
463 compatible = "renesas,r1ex24002", "atmel,24c02";
464 reg = <0x50>;
465 pagesize = <16>;
466 };
467 };
468
469 /*
470 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
471 * A fallback to GPIO is provided.
472 */
473 i2cexio4: i2c-mux3 {
474 compatible = "i2c-demux-pinctrl";
475 i2c-parent = <&i2c4>, <&gpioi2c4>;
476 i2c-bus-name = "i2c-exio4";
477 #address-cells = <1>;
478 #size-cells = <0>;
479 };
480 };
481
482 &du {
483 pinctrl-0 = <&du_pins>;
484 pinctrl-names = "default";
485 status = "okay";
486
487 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
488 <&x13_clk>, <&x2_clk>;
489 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
490
491 ports {
492 port@0 {
493 endpoint {
494 remote-endpoint = <&adv7511_in>;
495 };
496 };
497 };
498 };
499
500 &lvds0 {
501 ports {
502 port@1 {
503 lvds_connector: endpoint {
504 };
505 };
506 };
507 };
508
509 &extal_clk {
510 clock-frequency = <20000000>;
511 };
512
513 &pfc {
514 pinctrl-0 = <&scif_clk_pins>;
515 pinctrl-names = "default";
516
517 i2c1_pins: i2c1 {
518 groups = "i2c1";
519 function = "i2c1";
520 };
521
522 i2c2_pins: i2c2 {
523 groups = "i2c2";
524 function = "i2c2";
525 };
526
527 i2c4_pins: i2c4 {
528 groups = "i2c4_c";
529 function = "i2c4";
530 };
531
532 du_pins: du {
533 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
534 function = "du";
535 };
536
537 scif0_pins: scif0 {
538 groups = "scif0_data_d";
539 function = "scif0";
540 };
541
542 scif1_pins: scif1 {
543 groups = "scif1_data_d";
544 function = "scif1";
545 };
546
547 scif_clk_pins: scif_clk {
548 groups = "scif_clk";
549 function = "scif_clk";
550 };
551
552 ether_pins: ether {
553 groups = "eth_link", "eth_mdio", "eth_rmii";
554 function = "eth";
555 };
556
557 phy1_pins: phy1 {
558 groups = "intc_irq0";
559 function = "intc";
560 };
561
562 pmic_irq_pins: pmicirq {
563 groups = "intc_irq2";
564 function = "intc";
565 };
566
567 sdhi0_pins: sd0 {
568 groups = "sdhi0_data4", "sdhi0_ctrl";
569 function = "sdhi0";
570 power-source = <3300>;
571 };
572
573 sdhi0_pins_uhs: sd0_uhs {
574 groups = "sdhi0_data4", "sdhi0_ctrl";
575 function = "sdhi0";
576 power-source = <1800>;
577 };
578
579 sdhi1_pins: sd1 {
580 groups = "sdhi1_data4", "sdhi1_ctrl";
581 function = "sdhi1";
582 power-source = <3300>;
583 };
584
585 sdhi1_pins_uhs: sd1_uhs {
586 groups = "sdhi1_data4", "sdhi1_ctrl";
587 function = "sdhi1";
588 power-source = <1800>;
589 };
590
591 sdhi2_pins: sd2 {
592 groups = "sdhi2_data4", "sdhi2_ctrl";
593 function = "sdhi2";
594 power-source = <3300>;
595 };
596
597 sdhi2_pins_uhs: sd2_uhs {
598 groups = "sdhi2_data4", "sdhi2_ctrl";
599 function = "sdhi2";
600 power-source = <1800>;
601 };
602
603 qspi_pins: qspi {
604 groups = "qspi_ctrl", "qspi_data4";
605 function = "qspi";
606 };
607
608 msiof0_pins: msiof0 {
609 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
610 "msiof0_tx";
611 function = "msiof0";
612 };
613
614 usb0_pins: usb0 {
615 groups = "usb0";
616 function = "usb0";
617 };
618
619 usb1_pins: usb1 {
620 groups = "usb1";
621 function = "usb1";
622 };
623
624 vin0_pins: vin0 {
625 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
626 function = "vin0";
627 };
628
629 vin1_pins: vin1 {
630 groups = "vin1_data8", "vin1_clk";
631 function = "vin1";
632 };
633
634 sound_pins: sound {
635 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
636 function = "ssi";
637 };
638
639 sound_clk_pins: sound_clk {
640 groups = "audio_clk_a";
641 function = "audio_clk";
642 };
643
644 keyboard_pins: keyboard {
645 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
646 bias-pull-up;
647 };
648 };
649
650 ðer {
651 pinctrl-0 = <ðer_pins>, <&phy1_pins>;
652 pinctrl-names = "default";
653
654 phy-handle = <&phy1>;
655 renesas,ether-link-active-low;
656 status = "okay";
657
658 phy1: ethernet-phy@1 {
659 compatible = "ethernet-phy-id0022.1537",
660 "ethernet-phy-ieee802.3-c22";
661 reg = <1>;
662 interrupt-parent = <&irqc0>;
663 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
664 micrel,led-mode = <1>;
665 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
666 };
667 };
668
669 &cmt0 {
670 status = "okay";
671 };
672
673 &rwdt {
674 timeout-sec = <60>;
675 status = "okay";
676 };
677
678 &sata0 {
679 status = "okay";
680 };
681
682 &scif0 {
683 pinctrl-0 = <&scif0_pins>;
684 pinctrl-names = "default";
685
686 status = "okay";
687 };
688
689 &scif1 {
690 pinctrl-0 = <&scif1_pins>;
691 pinctrl-names = "default";
692
693 status = "okay";
694 };
695
696 &scif_clk {
697 clock-frequency = <14745600>;
698 };
699
700 &sdhi0 {
701 pinctrl-0 = <&sdhi0_pins>;
702 pinctrl-1 = <&sdhi0_pins_uhs>;
703 pinctrl-names = "default", "state_uhs";
704
705 vmmc-supply = <&vcc_sdhi0>;
706 vqmmc-supply = <&vccq_sdhi0>;
707 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
708 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
709 sd-uhs-sdr50;
710 sd-uhs-sdr104;
711 status = "okay";
712 };
713
714 &sdhi1 {
715 pinctrl-0 = <&sdhi1_pins>;
716 pinctrl-1 = <&sdhi1_pins_uhs>;
717 pinctrl-names = "default", "state_uhs";
718
719 vmmc-supply = <&vcc_sdhi1>;
720 vqmmc-supply = <&vccq_sdhi1>;
721 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
722 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
723 sd-uhs-sdr50;
724 status = "okay";
725 };
726
727 &sdhi2 {
728 pinctrl-0 = <&sdhi2_pins>;
729 pinctrl-1 = <&sdhi2_pins_uhs>;
730 pinctrl-names = "default", "state_uhs";
731
732 vmmc-supply = <&vcc_sdhi2>;
733 vqmmc-supply = <&vccq_sdhi2>;
734 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
735 sd-uhs-sdr50;
736 status = "okay";
737 };
738
739 &qspi {
740 pinctrl-0 = <&qspi_pins>;
741 pinctrl-names = "default";
742
743 status = "okay";
744
745 flash: flash@0 {
746 compatible = "spansion,s25fl512s", "jedec,spi-nor";
747 reg = <0>;
748 spi-max-frequency = <30000000>;
749 spi-tx-bus-width = <4>;
750 spi-rx-bus-width = <4>;
751 spi-cpha;
752 spi-cpol;
753 m25p,fast-read;
754
755 partitions {
756 compatible = "fixed-partitions";
757 #address-cells = <1>;
758 #size-cells = <1>;
759
760 partition@0 {
761 label = "loader";
762 reg = <0x00000000 0x00080000>;
763 read-only;
764 };
765 partition@80000 {
766 label = "user";
767 reg = <0x00080000 0x00580000>;
768 read-only;
769 };
770 partition@600000 {
771 label = "flash";
772 reg = <0x00600000 0x03a00000>;
773 };
774 };
775 };
776 };
777
778 &msiof0 {
779 pinctrl-0 = <&msiof0_pins>;
780 pinctrl-names = "default";
781
782 status = "okay";
783
784 pmic: pmic@0 {
785 compatible = "renesas,r2a11302ft";
786 reg = <0>;
787 spi-max-frequency = <6000000>;
788 spi-cpol;
789 spi-cpha;
790 };
791 };
792
793 &i2c1 {
794 pinctrl-0 = <&i2c1_pins>;
795 pinctrl-names = "i2c-exio1";
796 };
797
798 &i2c2 {
799 pinctrl-0 = <&i2c2_pins>;
800 pinctrl-names = "i2c-hdmi";
801
802 clock-frequency = <100000>;
803 };
804
805 &i2c4 {
806 pinctrl-0 = <&i2c4_pins>;
807 pinctrl-names = "i2c-exio4";
808 };
809
810 &i2c6 {
811 pinctrl-names = "default";
812 pinctrl-0 = <&pmic_irq_pins>;
813 status = "okay";
814 clock-frequency = <100000>;
815
816 pmic@58 {
817 compatible = "dlg,da9063";
818 reg = <0x58>;
819 interrupt-parent = <&irqc0>;
820 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
821 interrupt-controller;
822 #interrupt-cells = <2>;
823
824 rtc {
825 compatible = "dlg,da9063-rtc";
826 };
827
828 watchdog {
829 compatible = "dlg,da9063-watchdog";
830 };
831 };
832
833 vdd_dvfs: regulator@68 {
834 compatible = "dlg,da9210";
835 reg = <0x68>;
836 interrupt-parent = <&irqc0>;
837 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
838
839 regulator-min-microvolt = <1000000>;
840 regulator-max-microvolt = <1000000>;
841 regulator-boot-on;
842 regulator-always-on;
843 };
844 };
845
846 &pci0 {
847 status = "okay";
848 pinctrl-0 = <&usb0_pins>;
849 pinctrl-names = "default";
850 };
851
852 &pci1 {
853 status = "okay";
854 pinctrl-0 = <&usb1_pins>;
855 pinctrl-names = "default";
856 };
857
858 &hsusb {
859 status = "okay";
860 pinctrl-0 = <&usb0_pins>;
861 pinctrl-names = "default";
862 renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
863 };
864
865 &usbphy {
866 status = "okay";
867 };
868
869 &pcie_bus_clk {
870 clock-frequency = <100000000>;
871 };
872
873 &pciec {
874 status = "okay";
875 };
876
877 &cpu0 {
878 cpu0-supply = <&vdd_dvfs>;
879 };
880
881 /* HDMI video input */
882 &vin0 {
883 status = "okay";
884 pinctrl-0 = <&vin0_pins>;
885 pinctrl-names = "default";
886
887 port {
888 vin0ep2: endpoint {
889 remote-endpoint = <&adv7612_out>;
890 bus-width = <24>;
891 hsync-active = <0>;
892 vsync-active = <0>;
893 pclk-sample = <1>;
894 data-active = <1>;
895 };
896 };
897 };
898
899 /* composite video input */
900 &vin1 {
901 status = "okay";
902 pinctrl-0 = <&vin1_pins>;
903 pinctrl-names = "default";
904
905 port {
906 vin1ep: endpoint {
907 remote-endpoint = <&adv7180>;
908 bus-width = <8>;
909 };
910 };
911 };
912
913 &rcar_sound {
914 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
915 pinctrl-names = "default";
916
917 /* Single DAI */
918 #sound-dai-cells = <0>;
919
920 status = "okay";
921
922 rcar_sound,dai {
923 dai0 {
924 playback = <&ssi0>, <&src2>, <&dvc0>;
925 capture = <&ssi1>, <&src3>, <&dvc1>;
926 };
927 };
928 };
929
930 &ssi1 {
931 shared-pin;
932 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.