1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright 2012 Linaro Ltd
4 */
5
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/interrupt-controller/arm-gic.h>
8 #include <dt-bindings/clock/ste-db8500-clkout.h>
9 #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
10 #include <dt-bindings/mfd/dbx500-prcmu.h>
11 #include <dt-bindings/arm/ux500_pm_domains.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/thermal/thermal.h>
14
15 / {
16 #address-cells = <1>;
17 #size-cells = <1>;
18
19 /* This stablilizes the device enumeration */
20 aliases {
21 i2c0 = &i2c0;
22 i2c1 = &i2c1;
23 i2c2 = &i2c2;
24 i2c3 = &i2c3;
25 i2c4 = &i2c4;
26 spi0 = &spi0;
27 spi1 = &spi1;
28 spi2 = &spi2;
29 spi3 = &spi3;
30 serial0 = &serial0;
31 serial1 = &serial1;
32 serial2 = &serial2;
33 };
34
35 chosen {
36 };
37
38 cpus {
39 #address-cells = <1>;
40 #size-cells = <0>;
41 enable-method = "ste,dbx500-smp";
42
43 cpu-map {
44 cluster0 {
45 core0 {
46 cpu = <&CPU0>;
47 };
48 core1 {
49 cpu = <&CPU1>;
50 };
51 };
52 };
53 CPU0: cpu@300 {
54 device_type = "cpu";
55 compatible = "arm,cortex-a9";
56 reg = <0x300>;
57 clocks = <&prcmu_clk PRCMU_ARMSS>;
58 clock-names = "cpu";
59 clock-latency = <20000>;
60 #cooling-cells = <2>;
61 };
62 CPU1: cpu@301 {
63 device_type = "cpu";
64 compatible = "arm,cortex-a9";
65 reg = <0x301>;
66 };
67 };
68
69 thermal-zones {
70 /*
71 * Thermal zone for the SoC, using the thermal sensor in the
72 * PRCMU for temperature and the cpufreq driver for passive
73 * cooling.
74 */
75 cpu_thermal: cpu-thermal {
76 polling-delay-passive = <250>;
77 /*
78 * This sensor fires interrupts to update the thermal
79 * zone, so no polling is needed.
80 */
81 polling-delay = <0>;
82
83 thermal-sensors = <&thermal>;
84
85 trips {
86 cpu_alert: cpu-alert {
87 temperature = <70000>;
88 hysteresis = <2000>;
89 type = "passive";
90 };
91 cpu-crit {
92 temperature = <85000>;
93 hysteresis = <0>;
94 type = "critical";
95 };
96 };
97
98 cooling-maps {
99 trip = <&cpu_alert>;
100 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
101 contribution = <100>;
102 };
103 };
104 };
105
106 soc {
107 #address-cells = <1>;
108 #size-cells = <1>;
109 compatible = "stericsson,db8500", "simple-bus";
110 interrupt-parent = <&intc>;
111 ranges;
112
113 /*
114 * 640KB ESRAM (embedded static random access memory), divided
115 * into 5 banks of 128 KB each. This is a fast memory usually
116 * used by different accelerators. We group these according to
117 * their power domains: ESRAM0 (always on) ESRAM 1+2 and
118 * ESRAM 3+4.
119 */
120 sram@40000000 {
121 /* The first (always on) ESRAM 0, 128 KB */
122 compatible = "mmio-sram";
123 reg = <0x40000000 0x20000>;
124 #address-cells = <1>;
125 #size-cells = <1>;
126 ranges = <0 0x40000000 0x20000>;
127
128 sram@0 {
129 compatible = "stericsson,u8500-esram";
130 reg = <0x0 0x10000>;
131 pool;
132 };
133 lcpa: sram@10000 {
134 /*
135 * This eSRAM is used by the DMA40 DMA controller
136 * for Logical Channel Paramers (LCP), the address
137 * where these parameters are stored is called "LCPA".
138 * This is addressed directly by the driver so no
139 * pool is used.
140 */
141 compatible = "stericsson,u8500-esram";
142 label = "DMA40-LCPA";
143 reg = <0x10000 0x800>;
144 };
145 sram@10800 {
146 compatible = "stericsson,u8500-esram";
147 reg = <0x10800 0xf800>;
148 pool;
149 };
150 };
151 sram@40020000 {
152 /* ESRAM 1+2, 256 KB */
153 compatible = "mmio-sram";
154 reg = <0x40020000 0x40000>;
155 #address-cells = <1>;
156 #size-cells = <1>;
157 ranges = <0 0x40020000 0x40000>;
158 };
159 sram@40060000 {
160 /* ESRAM 3+4, 256 KB */
161 compatible = "mmio-sram";
162 reg = <0x40060000 0x40000>;
163 #address-cells = <1>;
164 #size-cells = <1>;
165 ranges = <0 0x40060000 0x40000>;
166
167 lcla: sram@20000 {
168 /*
169 * This eSRAM is used by the DMA40 DMA controller
170 * for Logical Channel Logical Addresses (LCLA), the address
171 * where these parameters are stored is called "LCLA".
172 * This is addressed directly by the driver so no
173 * pool is used.
174 */
175 compatible = "stericsson,u8500-esram";
176 label = "DMA40-LCLA";
177 reg = <0x20000 0x2000>;
178 };
179 };
180
181 ptm@801ae000 {
182 compatible = "arm,coresight-etm3x", "arm,primecell";
183 reg = <0x801ae000 0x1000>;
184
185 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
186 clock-names = "apb_pclk", "atclk";
187 cpu = <&CPU0>;
188 out-ports {
189 port {
190 ptm0_out_port: endpoint {
191 remote-endpoint = <&funnel_in_port0>;
192 };
193 };
194 };
195 };
196
197 ptm@801af000 {
198 compatible = "arm,coresight-etm3x", "arm,primecell";
199 reg = <0x801af000 0x1000>;
200
201 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
202 clock-names = "apb_pclk", "atclk";
203 cpu = <&CPU1>;
204 out-ports {
205 port {
206 ptm1_out_port: endpoint {
207 remote-endpoint = <&funnel_in_port1>;
208 };
209 };
210 };
211 };
212
213 funnel@801a6000 {
214 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
215 reg = <0x801a6000 0x1000>;
216
217 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
218 clock-names = "apb_pclk", "atclk";
219 out-ports {
220 port {
221 funnel_out_port: endpoint {
222 remote-endpoint =
223 <&replicator_in_port0>;
224 };
225 };
226 };
227
228 in-ports {
229 #address-cells = <1>;
230 #size-cells = <0>;
231
232 port@0 {
233 reg = <0>;
234 funnel_in_port0: endpoint {
235 remote-endpoint = <&ptm0_out_port>;
236 };
237 };
238
239 port@1 {
240 reg = <1>;
241 funnel_in_port1: endpoint {
242 remote-endpoint = <&ptm1_out_port>;
243 };
244 };
245 };
246 };
247
248 replicator {
249 compatible = "arm,coresight-static-replicator";
250 clocks = <&prcmu_clk PRCMU_APEATCLK>;
251 clock-names = "atclk";
252
253 out-ports {
254 #address-cells = <1>;
255 #size-cells = <0>;
256
257 port@0 {
258 reg = <0>;
259 replicator_out_port0: endpoint {
260 remote-endpoint = <&tpiu_in_port>;
261 };
262 };
263 port@1 {
264 reg = <1>;
265 replicator_out_port1: endpoint {
266 remote-endpoint = <&etb_in_port>;
267 };
268 };
269 };
270
271 in-ports {
272 port {
273 replicator_in_port0: endpoint {
274 remote-endpoint = <&funnel_out_port>;
275 };
276 };
277 };
278 };
279
280 tpiu@80190000 {
281 compatible = "arm,coresight-tpiu", "arm,primecell";
282 reg = <0x80190000 0x1000>;
283
284 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
285 clock-names = "apb_pclk", "atclk";
286 in-ports {
287 port {
288 tpiu_in_port: endpoint {
289 remote-endpoint = <&replicator_out_port0>;
290 };
291 };
292 };
293 };
294
295 etb@801a4000 {
296 compatible = "arm,coresight-etb10", "arm,primecell";
297 reg = <0x801a4000 0x1000>;
298
299 clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
300 clock-names = "apb_pclk", "atclk";
301 in-ports {
302 port {
303 etb_in_port: endpoint {
304 remote-endpoint = <&replicator_out_port1>;
305 };
306 };
307 };
308 };
309
310 intc: interrupt-controller@a0411000 {
311 compatible = "arm,cortex-a9-gic";
312 #interrupt-cells = <3>;
313 #address-cells = <1>;
314 interrupt-controller;
315 reg = <0xa0411000 0x1000>,
316 <0xa0410100 0x100>;
317 };
318
319 scu@a0410000 {
320 compatible = "arm,cortex-a9-scu";
321 reg = <0xa0410000 0x100>;
322 };
323
324 /*
325 * The backup RAM is used for retention during sleep
326 * and various things like spin tables
327 */
328 backupram@80150000 {
329 compatible = "ste,dbx500-backupram";
330 reg = <0x80150000 0x2000>;
331 };
332
333 L2: cache-controller {
334 compatible = "arm,pl310-cache";
335 reg = <0xa0412000 0x1000>;
336 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
337 cache-unified;
338 cache-level = <2>;
339 };
340
341 pmu {
342 compatible = "arm,cortex-a9-pmu";
343 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
344 };
345
346 pm_domains: pm_domains0 {
347 compatible = "stericsson,ux500-pm-domains";
348 #power-domain-cells = <1>;
349 };
350
351 clocks {
352 compatible = "stericsson,u8500-clks";
353 /*
354 * Registers for the CLKRST block on peripheral
355 * groups 1, 2, 3, 5, 6,
356 */
357 reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
358 <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
359 <0xa03cf000 0x1000>;
360
361 prcmu_clk: prcmu-clock {
362 #clock-cells = <1>;
363 };
364
365 prcc_pclk: prcc-periph-clock {
366 #clock-cells = <2>;
367 };
368
369 prcc_kclk: prcc-kernel-clock {
370 #clock-cells = <2>;
371 };
372
373 prcc_reset: prcc-reset-controller {
374 #reset-cells = <2>;
375 };
376
377 rtc_clk: rtc32k-clock {
378 #clock-cells = <0>;
379 };
380
381 smp_twd_clk: smp-twd-clock {
382 #clock-cells = <0>;
383 };
384
385 clkout_clk: clkout-clock {
386 /* Cell 1 id, cell 2 source, cell 3 div */
387 #clock-cells = <3>;
388 };
389 };
390
391 mtu@a03c6000 {
392 /* Nomadik System Timer */
393 compatible = "st,nomadik-mtu";
394 reg = <0xa03c6000 0x1000>;
395 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
396
397 clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
398 clock-names = "timclk", "apb_pclk";
399 };
400
401 timer@a0410600 {
402 compatible = "arm,cortex-a9-twd-timer";
403 reg = <0xa0410600 0x20>;
404 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
405
406 clocks = <&smp_twd_clk>;
407 };
408
409 watchdog@a0410620 {
410 compatible = "arm,cortex-a9-twd-wdt";
411 reg = <0xa0410620 0x20>;
412 interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
413 clocks = <&smp_twd_clk>;
414 };
415
416 rtc@80154000 {
417 compatible = "arm,pl031", "arm,primecell";
418 reg = <0x80154000 0x1000>;
419 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
420
421 clocks = <&rtc_clk>;
422 clock-names = "apb_pclk";
423 };
424
425 gpio0: gpio@8012e000 {
426 compatible = "stericsson,db8500-gpio",
427 "st,nomadik-gpio";
428 reg = <0x8012e000 0x80>;
429 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
430 interrupt-controller;
431 #interrupt-cells = <2>;
432 st,supports-sleepmode;
433 gpio-controller;
434 #gpio-cells = <2>;
435 gpio-bank = <0>;
436 gpio-ranges = <&pinctrl 0 0 32>;
437 clocks = <&prcc_pclk 1 9>;
438 };
439
440 gpio1: gpio@8012e080 {
441 compatible = "stericsson,db8500-gpio",
442 "st,nomadik-gpio";
443 reg = <0x8012e080 0x80>;
444 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
445 interrupt-controller;
446 #interrupt-cells = <2>;
447 st,supports-sleepmode;
448 gpio-controller;
449 #gpio-cells = <2>;
450 gpio-bank = <1>;
451 gpio-ranges = <&pinctrl 0 32 5>;
452 clocks = <&prcc_pclk 1 9>;
453 };
454
455 gpio2: gpio@8000e000 {
456 compatible = "stericsson,db8500-gpio",
457 "st,nomadik-gpio";
458 reg = <0x8000e000 0x80>;
459 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
460 interrupt-controller;
461 #interrupt-cells = <2>;
462 st,supports-sleepmode;
463 gpio-controller;
464 #gpio-cells = <2>;
465 gpio-bank = <2>;
466 gpio-ranges = <&pinctrl 0 64 32>;
467 clocks = <&prcc_pclk 3 8>;
468 };
469
470 gpio3: gpio@8000e080 {
471 compatible = "stericsson,db8500-gpio",
472 "st,nomadik-gpio";
473 reg = <0x8000e080 0x80>;
474 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
475 interrupt-controller;
476 #interrupt-cells = <2>;
477 st,supports-sleepmode;
478 gpio-controller;
479 #gpio-cells = <2>;
480 gpio-bank = <3>;
481 gpio-ranges = <&pinctrl 0 96 2>;
482 clocks = <&prcc_pclk 3 8>;
483 };
484
485 gpio4: gpio@8000e100 {
486 compatible = "stericsson,db8500-gpio",
487 "st,nomadik-gpio";
488 reg = <0x8000e100 0x80>;
489 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
490 interrupt-controller;
491 #interrupt-cells = <2>;
492 st,supports-sleepmode;
493 gpio-controller;
494 #gpio-cells = <2>;
495 gpio-bank = <4>;
496 gpio-ranges = <&pinctrl 0 128 32>;
497 clocks = <&prcc_pclk 3 8>;
498 };
499
500 gpio5: gpio@8000e180 {
501 compatible = "stericsson,db8500-gpio",
502 "st,nomadik-gpio";
503 reg = <0x8000e180 0x80>;
504 interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
505 interrupt-controller;
506 #interrupt-cells = <2>;
507 st,supports-sleepmode;
508 gpio-controller;
509 #gpio-cells = <2>;
510 gpio-bank = <5>;
511 gpio-ranges = <&pinctrl 0 160 12>;
512 clocks = <&prcc_pclk 3 8>;
513 };
514
515 gpio6: gpio@8011e000 {
516 compatible = "stericsson,db8500-gpio",
517 "st,nomadik-gpio";
518 reg = <0x8011e000 0x80>;
519 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
520 interrupt-controller;
521 #interrupt-cells = <2>;
522 st,supports-sleepmode;
523 gpio-controller;
524 #gpio-cells = <2>;
525 gpio-bank = <6>;
526 gpio-ranges = <&pinctrl 0 192 32>;
527 clocks = <&prcc_pclk 2 11>;
528 };
529
530 gpio7: gpio@8011e080 {
531 compatible = "stericsson,db8500-gpio",
532 "st,nomadik-gpio";
533 reg = <0x8011e080 0x80>;
534 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
535 interrupt-controller;
536 #interrupt-cells = <2>;
537 st,supports-sleepmode;
538 gpio-controller;
539 #gpio-cells = <2>;
540 gpio-bank = <7>;
541 gpio-ranges = <&pinctrl 0 224 7>;
542 clocks = <&prcc_pclk 2 11>;
543 };
544
545 gpio8: gpio@a03fe000 {
546 compatible = "stericsson,db8500-gpio",
547 "st,nomadik-gpio";
548 reg = <0xa03fe000 0x80>;
549 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
550 interrupt-controller;
551 #interrupt-cells = <2>;
552 st,supports-sleepmode;
553 gpio-controller;
554 #gpio-cells = <2>;
555 gpio-bank = <8>;
556 gpio-ranges = <&pinctrl 0 256 12>;
557 clocks = <&prcc_pclk 5 1>;
558 };
559
560 pinctrl: pinctrl {
561 compatible = "stericsson,db8500-pinctrl";
562 nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
563 <&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
564 <&gpio8>;
565 prcm = <&prcmu>;
566 };
567
568 usb_per5@a03e0000 {
569 compatible = "stericsson,db8500-musb";
570 reg = <0xa03e0000 0x10000>;
571 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
572 interrupt-names = "mc";
573
574 dr_mode = "otg";
575
576 dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
577 <&dma 38 0 0x0>, /* Logical - MemToDev */
578 <&dma 37 0 0x2>, /* Logical - DevToMem */
579 <&dma 37 0 0x0>, /* Logical - MemToDev */
580 <&dma 36 0 0x2>, /* Logical - DevToMem */
581 <&dma 36 0 0x0>, /* Logical - MemToDev */
582 <&dma 19 0 0x2>, /* Logical - DevToMem */
583 <&dma 19 0 0x0>, /* Logical - MemToDev */
584 <&dma 18 0 0x2>, /* Logical - DevToMem */
585 <&dma 18 0 0x0>, /* Logical - MemToDev */
586 <&dma 17 0 0x2>, /* Logical - DevToMem */
587 <&dma 17 0 0x0>, /* Logical - MemToDev */
588 <&dma 16 0 0x2>, /* Logical - DevToMem */
589 <&dma 16 0 0x0>, /* Logical - MemToDev */
590 <&dma 39 0 0x2>, /* Logical - DevToMem */
591 <&dma 39 0 0x0>; /* Logical - MemToDev */
592
593 dma-names = "iep_1_9", "oep_1_9",
594 "iep_2_10", "oep_2_10",
595 "iep_3_11", "oep_3_11",
596 "iep_4_12", "oep_4_12",
597 "iep_5_13", "oep_5_13",
598 "iep_6_14", "oep_6_14",
599 "iep_7_15", "oep_7_15",
600 "iep_8", "oep_8";
601
602 clocks = <&prcc_pclk 5 0>;
603 };
604
605 dma: dma-controller@801C0000 {
606 compatible = "stericsson,db8500-dma40", "stericsson,dma40";
607 reg = <0x801C0000 0x1000>;
608 reg-names = "base";
609 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
610 sram = <&lcpa>, <&lcla>;
611
612 #dma-cells = <3>;
613 memcpy-channels = <56 57 58 59 60>;
614
615 clocks = <&prcmu_clk PRCMU_DMACLK>;
616 };
617
618 prcmu: prcmu@80157000 {
619 compatible = "stericsson,db8500-prcmu", "syscon";
620 reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
621 reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
622 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
623 #address-cells = <1>;
624 #size-cells = <1>;
625 interrupt-controller;
626 #interrupt-cells = <2>;
627 ranges;
628
629 prcmu-timer-4@80157450 {
630 compatible = "stericsson,db8500-prcmu-timer-4";
631 reg = <0x80157450 0xC>;
632 };
633
634 thermal: thermal@801573c0 {
635 compatible = "stericsson,db8500-thermal";
636 reg = <0x801573c0 0x40>;
637 interrupt-parent = <&prcmu>;
638 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
639 <22 IRQ_TYPE_LEVEL_HIGH>;
640 interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
641 #thermal-sensor-cells = <0>;
642 };
643
644 db8500-prcmu-regulators {
645 compatible = "stericsson,db8500-prcmu-regulator";
646
647 // DB8500_REGULATOR_VAPE
648 db8500_vape_reg: db8500_vape {
649 regulator-always-on;
650 };
651
652 // DB8500_REGULATOR_VARM
653 db8500_varm_reg: db8500_varm {
654 };
655
656 // DB8500_REGULATOR_VMODEM
657 db8500_vmodem_reg: db8500_vmodem {
658 };
659
660 // DB8500_REGULATOR_VPLL
661 db8500_vpll_reg: db8500_vpll {
662 };
663
664 // DB8500_REGULATOR_VSMPS1
665 db8500_vsmps1_reg: db8500_vsmps1 {
666 };
667
668 // DB8500_REGULATOR_VSMPS2
669 db8500_vsmps2_reg: db8500_vsmps2 {
670 };
671
672 // DB8500_REGULATOR_VSMPS3
673 db8500_vsmps3_reg: db8500_vsmps3 {
674 };
675
676 // DB8500_REGULATOR_VRF1
677 db8500_vrf1_reg: db8500_vrf1 {
678 };
679
680 // DB8500_REGULATOR_SWITCH_SVAMMDSP
681 db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
682 };
683
684 // DB8500_REGULATOR_SWITCH_SVAMMDSPRET
685 db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
686 };
687
688 // DB8500_REGULATOR_SWITCH_SVAPIPE
689 db8500_sva_pipe_reg: db8500_sva_pipe {
690 };
691
692 // DB8500_REGULATOR_SWITCH_SIAMMDSP
693 db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
694 };
695
696 // DB8500_REGULATOR_SWITCH_SIAMMDSPRET
697 db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
698 };
699
700 // DB8500_REGULATOR_SWITCH_SIAPIPE
701 db8500_sia_pipe_reg: db8500_sia_pipe {
702 };
703
704 // DB8500_REGULATOR_SWITCH_SGA
705 db8500_sga_reg: db8500_sga {
706 vin-supply = <&db8500_vape_reg>;
707 };
708
709 // DB8500_REGULATOR_SWITCH_B2R2_MCDE
710 db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
711 vin-supply = <&db8500_vape_reg>;
712 };
713
714 // DB8500_REGULATOR_SWITCH_ESRAM12
715 db8500_esram12_reg: db8500_esram12 {
716 };
717
718 // DB8500_REGULATOR_SWITCH_ESRAM12RET
719 db8500_esram12_ret_reg: db8500_esram12_ret {
720 };
721
722 // DB8500_REGULATOR_SWITCH_ESRAM34
723 db8500_esram34_reg: db8500_esram34 {
724 };
725
726 // DB8500_REGULATOR_SWITCH_ESRAM34RET
727 db8500_esram34_ret_reg: db8500_esram34_ret {
728 };
729 };
730 };
731
732 i2c0: i2c@80004000 {
733 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
734 reg = <0x80004000 0x1000>;
735 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
736
737 #address-cells = <1>;
738 #size-cells = <0>;
739
740 clock-frequency = <400000>;
741 clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
742 clock-names = "i2cclk", "apb_pclk";
743 power-domains = <&pm_domains DOMAIN_VAPE>;
744 resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
745
746 status = "disabled";
747 };
748
749 i2c1: i2c@80122000 {
750 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
751 reg = <0x80122000 0x1000>;
752 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
753
754 #address-cells = <1>;
755 #size-cells = <0>;
756
757 clock-frequency = <400000>;
758
759 clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
760 clock-names = "i2cclk", "apb_pclk";
761 power-domains = <&pm_domains DOMAIN_VAPE>;
762 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C1>;
763
764 status = "disabled";
765 };
766
767 i2c2: i2c@80128000 {
768 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
769 reg = <0x80128000 0x1000>;
770 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
771
772 #address-cells = <1>;
773 #size-cells = <0>;
774
775 clock-frequency = <400000>;
776
777 clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
778 clock-names = "i2cclk", "apb_pclk";
779 power-domains = <&pm_domains DOMAIN_VAPE>;
780 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C2>;
781
782 status = "disabled";
783 };
784
785 i2c3: i2c@80110000 {
786 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
787 reg = <0x80110000 0x1000>;
788 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
789
790 #address-cells = <1>;
791 #size-cells = <0>;
792
793 clock-frequency = <400000>;
794
795 clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
796 clock-names = "i2cclk", "apb_pclk";
797 power-domains = <&pm_domains DOMAIN_VAPE>;
798 resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_I2C3>;
799
800 status = "disabled";
801 };
802
803 i2c4: i2c@8012a000 {
804 compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
805 reg = <0x8012a000 0x1000>;
806 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
807
808 #address-cells = <1>;
809 #size-cells = <0>;
810
811 clock-frequency = <400000>;
812
813 clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
814 clock-names = "i2cclk", "apb_pclk";
815 power-domains = <&pm_domains DOMAIN_VAPE>;
816 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C4>;
817
818 status = "disabled";
819 };
820
821 ssp0: spi@80002000 {
822 compatible = "arm,pl022", "arm,primecell";
823 reg = <0x80002000 0x1000>;
824 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
825 #address-cells = <1>;
826 #size-cells = <0>;
827 clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
828 clock-names = "sspclk", "apb_pclk";
829 dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
830 <&dma 8 0 0x0>; /* Logical - MemToDev */
831 dma-names = "rx", "tx";
832 power-domains = <&pm_domains DOMAIN_VAPE>;
833 resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP0>;
834
835 status = "disabled";
836 };
837
838 ssp1: spi@80003000 {
839 compatible = "arm,pl022", "arm,primecell";
840 reg = <0x80003000 0x1000>;
841 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
842 #address-cells = <1>;
843 #size-cells = <0>;
844 clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
845 clock-names = "sspclk", "apb_pclk";
846 dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
847 <&dma 9 0 0x0>; /* Logical - MemToDev */
848 dma-names = "rx", "tx";
849 power-domains = <&pm_domains DOMAIN_VAPE>;
850 resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP1>;
851
852 status = "disabled";
853 };
854
855 spi0: spi@8011a000 {
856 compatible = "arm,pl022", "arm,primecell";
857 reg = <0x8011a000 0x1000>;
858 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
859 #address-cells = <1>;
860 #size-cells = <0>;
861 /* Same clock wired to kernel and pclk */
862 clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
863 clock-names = "sspclk", "apb_pclk";
864 dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
865 <&dma 0 0 0x0>; /* Logical - MemToDev */
866 dma-names = "rx", "tx";
867 power-domains = <&pm_domains DOMAIN_VAPE>;
868
869 status = "disabled";
870 };
871
872 spi1: spi@80112000 {
873 compatible = "arm,pl022", "arm,primecell";
874 reg = <0x80112000 0x1000>;
875 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
876 #address-cells = <1>;
877 #size-cells = <0>;
878 /* Same clock wired to kernel and pclk */
879 clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
880 clock-names = "sspclk", "apb_pclk";
881 dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
882 <&dma 35 0 0x0>; /* Logical - MemToDev */
883 dma-names = "rx", "tx";
884 power-domains = <&pm_domains DOMAIN_VAPE>;
885
886 status = "disabled";
887 };
888
889 spi2: spi@80111000 {
890 compatible = "arm,pl022", "arm,primecell";
891 reg = <0x80111000 0x1000>;
892 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
893 #address-cells = <1>;
894 #size-cells = <0>;
895 /* Same clock wired to kernel and pclk */
896 clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
897 clock-names = "sspclk", "apb_pclk";
898 dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
899 <&dma 33 0 0x0>; /* Logical - MemToDev */
900 dma-names = "rx", "tx";
901 power-domains = <&pm_domains DOMAIN_VAPE>;
902
903 status = "disabled";
904 };
905
906 spi3: spi@80129000 {
907 compatible = "arm,pl022", "arm,primecell";
908 reg = <0x80129000 0x1000>;
909 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
910 #address-cells = <1>;
911 #size-cells = <0>;
912 /* Same clock wired to kernel and pclk */
913 clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
914 clock-names = "sspclk", "apb_pclk";
915 dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
916 <&dma 40 0 0x0>; /* Logical - MemToDev */
917 dma-names = "rx", "tx";
918 power-domains = <&pm_domains DOMAIN_VAPE>;
919 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SPI3>;
920
921 status = "disabled";
922 };
923
924 serial0: serial@80120000 {
925 compatible = "arm,pl011", "arm,primecell";
926 reg = <0x80120000 0x1000>;
927 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
928
929 dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
930 <&dma 13 0 0x0>; /* Logical - MemToDev */
931 dma-names = "rx", "tx";
932
933 clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
934 clock-names = "uart", "apb_pclk";
935 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART0>;
936
937 status = "disabled";
938 };
939
940 serial1: serial@80121000 {
941 compatible = "arm,pl011", "arm,primecell";
942 reg = <0x80121000 0x1000>;
943 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
944
945 dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
946 <&dma 12 0 0x0>; /* Logical - MemToDev */
947 dma-names = "rx", "tx";
948
949 clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
950 clock-names = "uart", "apb_pclk";
951 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART1>;
952
953 status = "disabled";
954 };
955
956 serial2: serial@80007000 {
957 compatible = "arm,pl011", "arm,primecell";
958 reg = <0x80007000 0x1000>;
959 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
960
961 dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
962 <&dma 11 0 0x0>; /* Logical - MemToDev */
963 dma-names = "rx", "tx";
964
965 clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
966 clock-names = "uart", "apb_pclk";
967 resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_UART2>;
968
969 status = "disabled";
970 };
971
972 mmc@80126000 {
973 compatible = "arm,pl18x", "arm,primecell";
974 reg = <0x80126000 0x1000>;
975 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
976
977 dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
978 <&dma 29 0 0x0>; /* Logical - MemToDev */
979 dma-names = "rx", "tx";
980
981 clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
982 clock-names = "sdi", "apb_pclk";
983 power-domains = <&pm_domains DOMAIN_VAPE>;
984 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SDI0>;
985
986 status = "disabled";
987 };
988
989 mmc@80118000 {
990 compatible = "arm,pl18x", "arm,primecell";
991 reg = <0x80118000 0x1000>;
992 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
993
994 dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
995 <&dma 32 0 0x0>; /* Logical - MemToDev */
996 dma-names = "rx", "tx";
997
998 clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
999 clock-names = "sdi", "apb_pclk";
1000 power-domains = <&pm_domains DOMAIN_VAPE>;
1001 resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI1>;
1002
1003 status = "disabled";
1004 };
1005
1006 mmc@80005000 {
1007 compatible = "arm,pl18x", "arm,primecell";
1008 reg = <0x80005000 0x1000>;
1009 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1010
1011 dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
1012 <&dma 28 0 0x0>; /* Logical - MemToDev */
1013 dma-names = "rx", "tx";
1014
1015 clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
1016 clock-names = "sdi", "apb_pclk";
1017 power-domains = <&pm_domains DOMAIN_VAPE>;
1018 resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI2>;
1019
1020 status = "disabled";
1021 };
1022
1023 mmc@80119000 {
1024 compatible = "arm,pl18x", "arm,primecell";
1025 reg = <0x80119000 0x1000>;
1026 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
1027
1028 dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
1029 <&dma 41 0 0x0>; /* Logical - MemToDev */
1030 dma-names = "rx", "tx";
1031
1032 clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
1033 clock-names = "sdi", "apb_pclk";
1034 power-domains = <&pm_domains DOMAIN_VAPE>;
1035 resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI3>;
1036
1037 status = "disabled";
1038 };
1039
1040 mmc@80114000 {
1041 compatible = "arm,pl18x", "arm,primecell";
1042 reg = <0x80114000 0x1000>;
1043 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
1044
1045 dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
1046 <&dma 42 0 0x0>; /* Logical - MemToDev */
1047 dma-names = "rx", "tx";
1048
1049 clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
1050 clock-names = "sdi", "apb_pclk";
1051 power-domains = <&pm_domains DOMAIN_VAPE>;
1052 resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI4>;
1053
1054 status = "disabled";
1055 };
1056
1057 mmc@80008000 {
1058 compatible = "arm,pl18x", "arm,primecell";
1059 reg = <0x80008000 0x1000>;
1060 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1061
1062 dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
1063 <&dma 43 0 0x0>; /* Logical - MemToDev */
1064 dma-names = "rx", "tx";
1065
1066 clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
1067 clock-names = "sdi", "apb_pclk";
1068 power-domains = <&pm_domains DOMAIN_VAPE>;
1069 resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI5>;
1070
1071 status = "disabled";
1072 };
1073
1074 sound {
1075 compatible = "stericsson,snd-soc-mop500";
1076 stericsson,cpu-dai = <&msp1 &msp3>;
1077 };
1078
1079 msp0: msp@80123000 {
1080 compatible = "stericsson,ux500-msp-i2s";
1081 reg = <0x80123000 0x1000>;
1082 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
1083 v-ape-supply = <&db8500_vape_reg>;
1084
1085 dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
1086 <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
1087 dma-names = "rx", "tx";
1088
1089 clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
1090 clock-names = "msp", "apb_pclk";
1091 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP0>;
1092
1093 status = "disabled";
1094 };
1095
1096 msp1: msp@80124000 {
1097 compatible = "stericsson,ux500-msp-i2s";
1098 reg = <0x80124000 0x1000>;
1099 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1100 v-ape-supply = <&db8500_vape_reg>;
1101
1102 /* This DMA channel only exist on DB8500 v1 */
1103 dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
1104 dma-names = "tx";
1105
1106 clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
1107 clock-names = "msp", "apb_pclk";
1108 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP1>;
1109
1110 status = "disabled";
1111 };
1112
1113 // HDMI sound
1114 msp2: msp@80117000 {
1115 compatible = "stericsson,ux500-msp-i2s";
1116 reg = <0x80117000 0x1000>;
1117 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1118 v-ape-supply = <&db8500_vape_reg>;
1119
1120 dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
1121 <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
1122 HighPrio - Fixed */
1123 dma-names = "rx", "tx";
1124
1125 clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
1126 clock-names = "msp", "apb_pclk";
1127 resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_MSP2>;
1128
1129 status = "disabled";
1130 };
1131
1132 msp3: msp@80125000 {
1133 compatible = "stericsson,ux500-msp-i2s";
1134 reg = <0x80125000 0x1000>;
1135 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
1136 v-ape-supply = <&db8500_vape_reg>;
1137
1138 /* This DMA channel only exist on DB8500 v2 */
1139 dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
1140 dma-names = "rx";
1141
1142 clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
1143 clock-names = "msp", "apb_pclk";
1144 resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP3>;
1145
1146 status = "disabled";
1147 };
1148
1149 external-bus@50000000 {
1150 compatible = "simple-bus";
1151 reg = <0x50000000 0x4000000>;
1152 #address-cells = <1>;
1153 #size-cells = <1>;
1154 ranges = <0 0x50000000 0x4000000>;
1155 status = "disabled";
1156 };
1157
1158 gpu@a0300000 {
1159 /*
1160 * This block is referred to as "Smart Graphics Adapter SGA500"
1161 * in documentation but is in practice a pretty straight-forward
1162 * MALI-400 GPU block.
1163 */
1164 compatible = "stericsson,db8500-mali", "arm,mali-400";
1165 reg = <0xa0300000 0x10000>;
1166 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1167 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1168 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1169 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1170 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
1171 interrupt-names = "gp",
1172 "gpmmu",
1173 "pp0",
1174 "ppmmu0",
1175 "combined";
1176 clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
1177 clock-names = "bus", "core";
1178 mali-supply = <&db8500_sga_reg>;
1179 power-domains = <&pm_domains DOMAIN_VAPE>;
1180 };
1181
1182 mcde@a0350000 {
1183 compatible = "ste,mcde";
1184 reg = <0xa0350000 0x1000>;
1185 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
1186 epod-supply = <&db8500_b2r2_mcde_reg>;
1187 clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
1188 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
1189 <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
1190 clock-names = "mcde", "lcd", "hdmi";
1191 #address-cells = <1>;
1192 #size-cells = <1>;
1193 ranges;
1194 status = "disabled";
1195
1196 dsi0: dsi@a0351000 {
1197 compatible = "ste,mcde-dsi";
1198 reg = <0xa0351000 0x1000>;
1199 clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
1200 clock-names = "hs", "lp";
1201 #address-cells = <1>;
1202 #size-cells = <0>;
1203 };
1204 dsi1: dsi@a0352000 {
1205 compatible = "ste,mcde-dsi";
1206 reg = <0xa0352000 0x1000>;
1207 clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
1208 clock-names = "hs", "lp";
1209 #address-cells = <1>;
1210 #size-cells = <0>;
1211 };
1212 dsi2: dsi@a0353000 {
1213 compatible = "ste,mcde-dsi";
1214 reg = <0xa0353000 0x1000>;
1215 /* This DSI port only has the Low Power / Energy Save clock */
1216 clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
1217 clock-names = "lp";
1218 #address-cells = <1>;
1219 #size-cells = <0>;
1220 };
1221 };
1222
1223 cryp@a03cb000 {
1224 compatible = "stericsson,ux500-cryp";
1225 reg = <0xa03cb000 0x1000>;
1226 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1227 clocks = <&prcc_pclk 6 1>;
1228 power-domains = <&pm_domains DOMAIN_VAPE>;
1229 };
1230
1231 hash@a03c2000 {
1232 compatible = "stericsson,ux500-hash";
1233 reg = <0xa03c2000 0x1000>;
1234 clocks = <&prcc_pclk 6 2>;
1235 power-domains = <&pm_domains DOMAIN_VAPE>;
1236 };
1237 };
1238 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.