~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm/st/stm32f429-disco.dts

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 /*
  2  * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
  3  *
  4  * This file is dual-licensed: you can use it either under the terms
  5  * of the GPL or the X11 license, at your option. Note that this dual
  6  * licensing only applies to this file, and not this project as a
  7  * whole.
  8  *
  9  *  a) This file is free software; you can redistribute it and/or
 10  *     modify it under the terms of the GNU General Public License as
 11  *     published by the Free Software Foundation; either version 2 of the
 12  *     License, or (at your option) any later version.
 13  *
 14  *     This file is distributed in the hope that it will be useful,
 15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17  *     GNU General Public License for more details.
 18  *
 19  *     You should have received a copy of the GNU General Public
 20  *     License along with this file; if not, write to the Free
 21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 22  *     MA 02110-1301 USA
 23  *
 24  * Or, alternatively,
 25  *
 26  *  b) Permission is hereby granted, free of charge, to any person
 27  *     obtaining a copy of this software and associated documentation
 28  *     files (the "Software"), to deal in the Software without
 29  *     restriction, including without limitation the rights to use,
 30  *     copy, modify, merge, publish, distribute, sublicense, and/or
 31  *     sell copies of the Software, and to permit persons to whom the
 32  *     Software is furnished to do so, subject to the following
 33  *     conditions:
 34  *
 35  *     The above copyright notice and this permission notice shall be
 36  *     included in all copies or substantial portions of the Software.
 37  *
 38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 45  *     OTHER DEALINGS IN THE SOFTWARE.
 46  */
 47 
 48 /dts-v1/;
 49 #include "stm32f429.dtsi"
 50 #include "stm32f429-pinctrl.dtsi"
 51 #include <dt-bindings/input/input.h>
 52 #include <dt-bindings/interrupt-controller/irq.h>
 53 #include <dt-bindings/gpio/gpio.h>
 54 
 55 / {
 56         model = "STMicroelectronics STM32F429i-DISCO board";
 57         compatible = "st,stm32f429i-disco", "st,stm32f429";
 58 
 59         chosen {
 60                 bootargs = "root=/dev/ram";
 61                 stdout-path = "serial0:115200n8";
 62         };
 63 
 64         memory@90000000 {
 65                 device_type = "memory";
 66                 reg = <0x90000000 0x800000>;
 67         };
 68 
 69         aliases {
 70                 serial0 = &usart1;
 71         };
 72 
 73         leds {
 74                 compatible = "gpio-leds";
 75                 led-red {
 76                         gpios = <&gpiog 14 0>;
 77                 };
 78                 led-green {
 79                         gpios = <&gpiog 13 0>;
 80                         linux,default-trigger = "heartbeat";
 81                 };
 82         };
 83 
 84         gpio-keys {
 85                 compatible = "gpio-keys";
 86                 autorepeat;
 87                 button-0 {
 88                         label = "User";
 89                         linux,code = <KEY_HOME>;
 90                         gpios = <&gpioa 0 0>;
 91                 };
 92         };
 93 
 94         /* This turns on vbus for otg for host mode (dwc2) */
 95         vcc5v_otg: vcc5v-otg-regulator {
 96                 compatible = "regulator-fixed";
 97                 gpio = <&gpioc 4 0>;
 98                 regulator-name = "vcc5_host1";
 99                 regulator-always-on;
100         };
101 };
102 
103 &clk_hse {
104         clock-frequency = <8000000>;
105 };
106 
107 &crc {
108         status = "okay";
109 };
110 
111 &i2c3 {
112         pinctrl-names = "default";
113         pinctrl-0 = <&i2c3_pins>;
114         clock-frequency = <100000>;
115         status = "okay";
116 
117         stmpe811@41 {
118                 compatible = "st,stmpe811";
119                 reg = <0x41>;
120                 interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
121                 interrupt-parent = <&gpioa>;
122                 /* 3.25 MHz ADC clock speed */
123                 st,adc-freq = <1>;
124                 /* 12-bit ADC */
125                 st,mod-12b = <1>;
126                 /* internal ADC reference */
127                 st,ref-sel = <0>;
128                 /* ADC converstion time: 80 clocks */
129                 st,sample-time = <4>;
130 
131                 stmpe_touchscreen {
132                         compatible = "st,stmpe-ts";
133                         /* 8 sample average control */
134                         st,ave-ctrl = <3>;
135                         /* 7 length fractional part in z */
136                         st,fraction-z = <7>;
137                         /*
138                          * 50 mA typical 80 mA max touchscreen drivers
139                          * current limit value
140                          */
141                         st,i-drive = <1>;
142                         /* 1 ms panel driver settling time */
143                         st,settling = <3>;
144                         /* 5 ms touch detect interrupt delay */
145                         st,touch-det-delay = <5>;
146                 };
147 
148                 stmpe_adc {
149                         compatible = "st,stmpe-adc";
150                         /* forbid to use ADC channels 3-0 (touch) */
151                         st,norequest-mask = <0x0F>;
152                 };
153         };
154 };
155 
156 &ltdc {
157         status = "okay";
158         pinctrl-0 = <&ltdc_pins_b>;
159         pinctrl-names = "default";
160 
161         port {
162                 ltdc_out_rgb: endpoint {
163                         remote-endpoint = <&panel_in_rgb>;
164                 };
165         };
166 };
167 
168 &rtc {
169         assigned-clocks = <&rcc 1 CLK_RTC>;
170         assigned-clock-parents = <&rcc 1 CLK_LSI>;
171         status = "okay";
172 };
173 
174 &spi5 {
175         status = "okay";
176         pinctrl-0 = <&spi5_pins>;
177         pinctrl-names = "default";
178         #address-cells = <1>;
179         #size-cells = <0>;
180         cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
181 
182         l3gd20: l3gd20@0 {
183                 compatible = "st,l3gd20-gyro";
184                 spi-max-frequency = <10000000>;
185                 st,drdy-int-pin = <2>;
186                 interrupt-parent = <&gpioa>;
187                 interrupts = <1 IRQ_TYPE_EDGE_RISING>,
188                                 <2 IRQ_TYPE_EDGE_RISING>;
189                 reg = <0>;
190                 status = "okay";
191         };
192 
193         display: display@1 {
194                 /* Connect panel-ilitek-9341 to ltdc */
195                 compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
196                 reg = <1>;
197                 spi-3wire;
198                 spi-max-frequency = <10000000>;
199                 dc-gpios = <&gpiod 13 0>;
200                 port {
201                         panel_in_rgb: endpoint {
202                         remote-endpoint = <&ltdc_out_rgb>;
203                         };
204                 };
205         };
206 };
207 
208 &timers5 {
209         /* Override timer5 to act as clockevent */
210         compatible = "st,stm32-timer";
211         interrupts = <50>;
212         status = "okay";
213         /delete-property/#address-cells;
214         /delete-property/#size-cells;
215         /delete-property/clock-names;
216         /delete-node/pwm;
217         /delete-node/timer@4;
218 };
219 
220 &usart1 {
221         pinctrl-0 = <&usart1_pins_a>;
222         pinctrl-names = "default";
223         status = "okay";
224 };
225 
226 &usbotg_hs {
227         compatible = "st,stm32f4x9-fsotg";
228         dr_mode = "host";
229         pinctrl-0 = <&usbotg_fs_pins_b>;
230         pinctrl-names = "default";
231         status = "okay";
232 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php