1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6 /*
7 * VScom OnRISC
8 * https://www.vscom.de
9 */
10
11 /dts-v1/;
12
13 #include "am335x-baltos.dtsi"
14 #include "am335x-baltos-leds.dtsi"
15
16 / {
17 model = "NetCom Plus";
18 };
19
20 &am33xx_pinmux {
21 uart1_pins: uart1-pins {
22 pinctrl-single,pins = <
23 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */
24 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */
25 AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */
26 AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */
27 AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
28 AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
29 AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
30 AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
31 >;
32 };
33
34 uart2_pins: uart2-pins {
35 pinctrl-single,pins = <
36 AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */
37 AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */
38 AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */
39 AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */
40 AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
41 AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
42 AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
43 AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
44 >;
45 };
46 };
47
48 &usb0_phy {
49 status = "okay";
50 };
51
52 &usb0 {
53 status = "okay";
54 dr_mode = "host";
55 };
56
57 &uart1 {
58 pinctrl-names = "default";
59 pinctrl-0 = <&uart1_pins>;
60 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
61 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
62 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
63 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
64
65 status = "okay";
66 };
67
68 &uart2 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&uart2_pins>;
71 dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
72 dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
73 dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
74 rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
75
76 status = "okay";
77 };
78
79 &davinci_mdio_sw {
80 phy0: ethernet-phy@0 {
81 reg = <1>;
82 };
83 };
84
85 &cpsw_port1 {
86 phy-mode = "rmii";
87 ti,dual-emac-pvid = <1>;
88 phy-handle = <&phy0>;
89 };
90
91 &cpsw_port2 {
92 phy-mode = "rgmii-id";
93 ti,dual-emac-pvid = <2>;
94 phy-handle = <&phy1>;
95 };
96
97 &gpio0 {
98 gpio-line-names =
99 "MDIO",
100 "MDC",
101 "UART2_RX",
102 "UART2_TX",
103 "I2C1_SDA",
104 "I2C1_SCL",
105 "NC",
106 "NC",
107 "NC",
108 "NC",
109 "NC",
110 "NC",
111 "UART1_CTSN",
112 "UART1_RTSN",
113 "UART1_RX",
114 "UART1_TX",
115 "onrisc:blue:wlan",
116 "onrisc:green:app",
117 "USB0_DRVVBUS",
118 "ETH2_INT",
119 "NC",
120 "NC",
121 "MMC1_DAT0",
122 "MMC1_DAT1",
123 "NC",
124 "NC",
125 "MMC1_DAT2",
126 "MMC1_DAT3",
127 "NC",
128 "NC",
129 "GPMC_WAIT0",
130 "GPMC_WP_N";
131 };
132
133 &gpio1 {
134 gpio-line-names =
135 "GPMC_AD0",
136 "GPMC_AD1",
137 "GPMC_AD2",
138 "GPMC_AD3",
139 "GPMC_AD4",
140 "GPMC_AD5",
141 "GPMC_AD6",
142 "GPMC_AD7",
143 "NC",
144 "NC",
145 "CONSOLE_RX",
146 "CONSOLE_TX",
147 "UART2_DTR",
148 "UART2_DSR",
149 "UART2_DCD",
150 "UART2_RI",
151 "RGMII2_TCTL",
152 "RGMII2_RCTL",
153 "RGMII2_TD3",
154 "RGMII2_TD2",
155 "RGMII2_TD1",
156 "RGMII2_TD0",
157 "RGMII2_TCLK",
158 "RGMII2_RCLK",
159 "RGMII2_RD3",
160 "RGMII2_RD2",
161 "RGMII2_RD1",
162 "RGMII2_RD0",
163 "PMIC_INT1",
164 "GPMC_CSN0_Flash",
165 "MMC1_CLK",
166 "MMC1_CMD";
167 };
168
169 &gpio2 {
170 gpio-line-names =
171 "GPMC_CSN3_BUS",
172 "GPMC_CLK",
173 "GPMC_ADVN_ALE",
174 "GPMC_OEN_RE_N",
175 "GPMC_WE_N",
176 "GPMC_BEN0_CLE",
177 "NC",
178 "NC",
179 "NC",
180 "NC",
181 "NC",
182 "NC",
183 "NC",
184 "NC",
185 "NC",
186 "NC",
187 "NC",
188 "NC",
189 "SW2_0",
190 "SW2_1",
191 "NC",
192 "NC",
193 "UART1_DTR",
194 "UART1_DSR",
195 "UART1_DCD",
196 "UART1_RI",
197 "MMC0_DAT3",
198 "MMC0_DAT2",
199 "MMC0_DAT1",
200 "MMC0_DAT0",
201 "MMC0_CLK",
202 "MMC0_CMD";
203 };
204
205 &gpio3 {
206 gpio-line-names =
207 "onrisc:red:power",
208 "NC",
209 "NC",
210 "NC",
211 "NC",
212 "UART2_CTSN",
213 "UART2_RTSN",
214 "WLAN_IRQ",
215 "WLAN_EN",
216 "SW2_2",
217 "SW2_3",
218 "NC",
219 "NC",
220 "NC",
221 "ModeA0",
222 "ModeA1",
223 "ModeA2",
224 "ModeA3",
225 "NC",
226 "NC",
227 "NC",
228 "NC",
229 "NC",
230 "NC",
231 "NC",
232 "NC",
233 "NC",
234 "NC",
235 "NC",
236 "NC",
237 "NC",
238 "NC";
239 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.