1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2016 Endless Computers, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
5 */
6
7 /* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
8 * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
9 */
10
11 #include <dt-bindings/sound/meson-aiu.h>
12
13 / {
14 aliases {
15 serial0 = &uart_AO;
16 ethernet0 = ðmac;
17 };
18
19 dio2133: analog-amplifier {
20 compatible = "simple-audio-amplifier";
21 sound-name-prefix = "AU2";
22 VCC-supply = <&hdmi_5v>;
23 enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
24 };
25
26 spdif_dit: audio-codec-0 {
27 #sound-dai-cells = <0>;
28 compatible = "linux,spdif-dit";
29 sound-name-prefix = "DIT";
30 };
31
32 chosen {
33 stdout-path = "serial0:115200n8";
34 };
35
36 memory@0 {
37 device_type = "memory";
38 reg = <0x0 0x0 0x0 0x80000000>;
39 };
40
41 hdmi_5v: regulator-hdmi-5v {
42 compatible = "regulator-fixed";
43
44 regulator-name = "HDMI_5V";
45 regulator-min-microvolt = <5000000>;
46 regulator-max-microvolt = <5000000>;
47
48 gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
49 enable-active-high;
50 regulator-always-on;
51 };
52
53 vddio_ao18: regulator-vddio-ao18 {
54 compatible = "regulator-fixed";
55 regulator-name = "VDDIO_AO18";
56 regulator-min-microvolt = <1800000>;
57 regulator-max-microvolt = <1800000>;
58 };
59
60 vddio_boot: regulator-vddio-boot {
61 compatible = "regulator-fixed";
62 regulator-name = "VDDIO_BOOT";
63 regulator-min-microvolt = <1800000>;
64 regulator-max-microvolt = <1800000>;
65 };
66
67 vddao_3v3: regulator-vddao-3v3 {
68 compatible = "regulator-fixed";
69 regulator-name = "VDDAO_3V3";
70 regulator-min-microvolt = <3300000>;
71 regulator-max-microvolt = <3300000>;
72 };
73
74 vcc_3v3: regulator-vcc-3v3 {
75 compatible = "regulator-fixed";
76 regulator-name = "VCC_3V3";
77 regulator-min-microvolt = <3300000>;
78 regulator-max-microvolt = <3300000>;
79 };
80
81 emmc_pwrseq: emmc-pwrseq {
82 compatible = "mmc-pwrseq-emmc";
83 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
84 };
85
86 wifi32k: wifi32k {
87 compatible = "pwm-clock";
88 #clock-cells = <0>;
89 clock-frequency = <32768>;
90 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
91 };
92
93 sdio_pwrseq: sdio-pwrseq {
94 compatible = "mmc-pwrseq-simple";
95 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
96 clocks = <&wifi32k>;
97 clock-names = "ext_clock";
98 };
99
100 cvbs-connector {
101 compatible = "composite-video-connector";
102
103 port {
104 cvbs_connector_in: endpoint {
105 remote-endpoint = <&cvbs_vdac_out>;
106 };
107 };
108 };
109
110 hdmi-connector {
111 compatible = "hdmi-connector";
112 type = "a";
113
114 port {
115 hdmi_connector_in: endpoint {
116 remote-endpoint = <&hdmi_tx_tmds_out>;
117 };
118 };
119 };
120
121 sound {
122 compatible = "amlogic,gx-sound-card";
123 model = "P230-Q200";
124 audio-aux-devs = <&dio2133>;
125 audio-widgets = "Line", "Lineout";
126 audio-routing = "AU2 INL", "ACODEC LOLP",
127 "AU2 INR", "ACODEC LORP",
128 "AU2 INL", "ACODEC LOLN",
129 "AU2 INR", "ACODEC LORN",
130 "Lineout", "AU2 OUTL",
131 "Lineout", "AU2 OUTR";
132 clocks = <&clkc CLKID_MPLL0>,
133 <&clkc CLKID_MPLL1>,
134 <&clkc CLKID_MPLL2>;
135
136 assigned-clocks = <&clkc CLKID_MPLL0>,
137 <&clkc CLKID_MPLL1>,
138 <&clkc CLKID_MPLL2>;
139 assigned-clock-parents = <0>, <0>, <0>;
140 assigned-clock-rates = <294912000>,
141 <270950400>,
142 <393216000>;
143 dai-link-0 {
144 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
145 };
146
147 dai-link-1 {
148 sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
149 };
150
151 dai-link-2 {
152 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
153 dai-format = "i2s";
154 mclk-fs = <256>;
155
156 codec-0 {
157 sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
158 };
159
160 codec-1 {
161 sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
162 };
163 };
164
165 dai-link-3 {
166 sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
167
168 codec-0 {
169 sound-dai = <&spdif_dit>;
170 };
171 };
172
173 dai-link-4 {
174 sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
175
176 codec-0 {
177 sound-dai = <&hdmi_tx>;
178 };
179 };
180
181 dai-link-5 {
182 sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
183
184 codec-0 {
185 sound-dai = <&acodec>;
186 };
187 };
188 };
189 };
190
191 &acodec {
192 AVDD-supply = <&vddio_ao18>;
193 status = "okay";
194 };
195
196 &aiu {
197 status = "okay";
198 pinctrl-0 = <&spdif_out_h_pins>;
199 pinctrl-names = "default";
200
201 };
202
203 &cec_AO {
204 status = "okay";
205 pinctrl-0 = <&ao_cec_pins>;
206 pinctrl-names = "default";
207 hdmi-phandle = <&hdmi_tx>;
208 };
209
210 &cvbs_vdac_port {
211 cvbs_vdac_out: endpoint {
212 remote-endpoint = <&cvbs_connector_in>;
213 };
214 };
215
216 ðmac {
217 status = "okay";
218 };
219
220 &hdmi_tx {
221 status = "okay";
222 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
223 pinctrl-names = "default";
224 hdmi-supply = <&hdmi_5v>;
225 };
226
227 &hdmi_tx_tmds_port {
228 hdmi_tx_tmds_out: endpoint {
229 remote-endpoint = <&hdmi_connector_in>;
230 };
231 };
232
233 &ir {
234 status = "okay";
235 pinctrl-0 = <&remote_input_ao_pins>;
236 pinctrl-names = "default";
237 };
238
239 &pwm_ef {
240 status = "okay";
241 pinctrl-0 = <&pwm_e_pins>;
242 pinctrl-names = "default";
243 clocks = <&clkc CLKID_FCLK_DIV4>;
244 clock-names = "clkin0";
245 };
246
247 &saradc {
248 status = "okay";
249 vref-supply = <&vddio_ao18>;
250 };
251
252 /* Wireless SDIO Module */
253 &sd_emmc_a {
254 status = "okay";
255 pinctrl-0 = <&sdio_pins>;
256 pinctrl-1 = <&sdio_clk_gate_pins>;
257 pinctrl-names = "default", "clk-gate";
258 #address-cells = <1>;
259 #size-cells = <0>;
260
261 bus-width = <4>;
262 cap-sd-highspeed;
263 max-frequency = <50000000>;
264
265 non-removable;
266 disable-wp;
267
268 /* WiFi firmware requires power to be kept while in suspend */
269 keep-power-in-suspend;
270
271 mmc-pwrseq = <&sdio_pwrseq>;
272
273 vmmc-supply = <&vddao_3v3>;
274 vqmmc-supply = <&vddio_boot>;
275 };
276
277 /* SD card */
278 &sd_emmc_b {
279 status = "okay";
280 pinctrl-0 = <&sdcard_pins>;
281 pinctrl-1 = <&sdcard_clk_gate_pins>;
282 pinctrl-names = "default", "clk-gate";
283
284 bus-width = <4>;
285 cap-sd-highspeed;
286 max-frequency = <50000000>;
287 disable-wp;
288
289 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
290
291 vmmc-supply = <&vddao_3v3>;
292 vqmmc-supply = <&vddio_boot>;
293 };
294
295 /* eMMC */
296 &sd_emmc_c {
297 status = "okay";
298 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
299 pinctrl-1 = <&emmc_clk_gate_pins>;
300 pinctrl-names = "default", "clk-gate";
301
302 bus-width = <8>;
303 cap-mmc-highspeed;
304 max-frequency = <200000000>;
305 non-removable;
306 disable-wp;
307 mmc-ddr-1_8v;
308 mmc-hs200-1_8v;
309
310 mmc-pwrseq = <&emmc_pwrseq>;
311 vmmc-supply = <&vcc_3v3>;
312 vqmmc-supply = <&vddio_boot>;
313 };
314
315 /* This UART is brought out to the DB9 connector */
316 &uart_AO {
317 status = "okay";
318 pinctrl-0 = <&uart_ao_a_pins>;
319 pinctrl-names = "default";
320 };
321
322 &usb {
323 status = "okay";
324 dr_mode = "otg";
325 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.