1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 //
3 // Copyright 2018 CompuLab
4
5 /dts-v1/;
6
7 #include "imx8mm.dtsi"
8 #include <dt-bindings/leds/common.h>
9
10 / {
11 aliases {
12 rtc0 = &rtc_i2c;
13 rtc1 = &snvs_rtc;
14 mmc0 = &usdhc3;
15 };
16
17 chosen {
18 stdout-path = &uart3;
19 };
20
21 backlight {
22 compatible = "pwm-backlight";
23 pwms = <&pwm2 0 3000000 0>;
24 brightness-levels = <0 255>;
25 num-interpolated-steps = <255>;
26 default-brightness-level = <222>;
27 status = "okay";
28 };
29
30 leds {
31 compatible = "gpio-leds";
32 pinctrl-names = "default";
33 pinctrl-0 = <&pinctrl_gpio_led>;
34
35 heartbeat-led {
36 function = LED_FUNCTION_STATUS;
37 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
38 linux,default-trigger = "heartbeat";
39 };
40 };
41
42 pmic_osc: clock-pmic {
43 compatible = "fixed-clock";
44 #clock-cells = <0>;
45 clock-frequency = <32768>;
46 clock-output-names = "pmic_osc";
47 };
48
49 wlreg_on: regulator-wlreg-on {
50 compatible = "regulator-fixed";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-name = "wlreg_on";
54 gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
55 startup-delay-us = <100>;
56 enable-active-high;
57 regulator-always-on;
58 status = "okay";
59 };
60
61 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
62 compatible = "regulator-fixed";
63 regulator-name = "VSD_3V3";
64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <3300000>;
66 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
67 enable-active-high;
68 startup-delay-us = <100>;
69 off-on-delay-us = <12000>;
70 };
71
72 regulator-usdhc3rst {
73 compatible = "regulator-fixed";
74 regulator-name = "usdhc3_rst";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
77 gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
78 regulator-always-on;
79 enable-active-high;
80 };
81
82 regulator-fec1rst {
83 compatible = "regulator-fixed";
84 regulator-name = "fec1_rst";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
87 gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
88 regulator-always-on;
89 enable-active-high;
90 startup-delay-us = <500>;
91 regulator-boot-on;
92 };
93 };
94
95 &A53_0 {
96 arm-supply = <&buck2>;
97 };
98
99 &cpu_alert0 {
100 temperature = <105000>;
101 };
102
103 &cpu_crit0 {
104 temperature = <115000>;
105 };
106
107 &fec1 {
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_fec1>;
110 phy-mode = "rgmii-id";
111 phy-handle = <ðphy0>;
112 fsl,magic-packet;
113 status = "okay";
114
115 mdio {
116 #address-cells = <1>;
117 #size-cells = <0>;
118
119 ethphy0: ethernet-phy@0 {
120 compatible = "ethernet-phy-ieee802.3-c22";
121 reg = <0>;
122 };
123 };
124 };
125
126 &i2c2 {
127 clock-frequency = <400000>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_i2c2>;
130 status = "okay";
131
132 pmic@4b {
133 reg = <0x4b>;
134 compatible = "rohm,bd71837";
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_pmic>;
137 #clock-cells = <0>;
138 clocks = <&pmic_osc>;
139 clock-names = "osc";
140 clock-output-names = "pmic_clk";
141 interrupt-parent = <&gpio1>;
142 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
143 rohm,reset-snvs-powered;
144
145 regulators {
146 buck1: BUCK1 {
147 regulator-name = "buck1";
148 regulator-min-microvolt = <700000>;
149 regulator-max-microvolt = <1300000>;
150 regulator-boot-on;
151 regulator-always-on;
152 regulator-ramp-delay = <1250>;
153 };
154
155 buck2: BUCK2 {
156 regulator-name = "buck2";
157 regulator-min-microvolt = <700000>;
158 regulator-max-microvolt = <1300000>;
159 regulator-boot-on;
160 regulator-always-on;
161 regulator-ramp-delay = <1250>;
162 rohm,dvs-run-voltage = <1000000>;
163 rohm,dvs-idle-voltage = <900000>;
164 };
165
166 buck3: BUCK3 {
167 regulator-name = "buck3";
168 regulator-min-microvolt = <700000>;
169 regulator-max-microvolt = <1300000>;
170 regulator-boot-on;
171 regulator-always-on;
172 };
173
174 buck4: BUCK4 {
175 regulator-name = "buck4";
176 regulator-min-microvolt = <700000>;
177 regulator-max-microvolt = <1300000>;
178 regulator-boot-on;
179 regulator-always-on;
180 };
181
182 buck5: BUCK5 {
183 regulator-name = "buck5";
184 regulator-min-microvolt = <700000>;
185 regulator-max-microvolt = <1350000>;
186 regulator-boot-on;
187 regulator-always-on;
188 };
189
190 buck6: BUCK6 {
191 regulator-name = "buck6";
192 regulator-min-microvolt = <3000000>;
193 regulator-max-microvolt = <3300000>;
194 regulator-boot-on;
195 regulator-always-on;
196 };
197
198 buck7: BUCK7 {
199 regulator-name = "buck7";
200 regulator-min-microvolt = <1605000>;
201 regulator-max-microvolt = <1995000>;
202 regulator-boot-on;
203 regulator-always-on;
204 };
205
206 buck8: BUCK8 {
207 regulator-name = "buck8";
208 regulator-min-microvolt = <800000>;
209 regulator-max-microvolt = <1400000>;
210 regulator-boot-on;
211 regulator-always-on;
212 };
213
214 ldo1: LDO1 {
215 regulator-name = "ldo1";
216 regulator-min-microvolt = <1600000>;
217 regulator-max-microvolt = <1900000>;
218 regulator-boot-on;
219 regulator-always-on;
220 };
221
222 ldo2: LDO2 {
223 regulator-name = "ldo2";
224 regulator-min-microvolt = <800000>;
225 regulator-max-microvolt = <900000>;
226 regulator-boot-on;
227 regulator-always-on;
228 };
229
230 ldo3: LDO3 {
231 regulator-name = "ldo3";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <3300000>;
234 regulator-boot-on;
235 regulator-always-on;
236 };
237
238 ldo4: LDO4 {
239 regulator-name = "ldo4";
240 regulator-min-microvolt = <900000>;
241 regulator-max-microvolt = <1800000>;
242 regulator-boot-on;
243 regulator-always-on;
244 };
245
246 ldo5: LDO5 {
247 regulator-name = "ldo5";
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <3300000>;
250 };
251
252 ldo6: LDO6 {
253 regulator-name = "ldo6";
254 regulator-min-microvolt = <900000>;
255 regulator-max-microvolt = <1800000>;
256 regulator-boot-on;
257 regulator-always-on;
258 };
259
260 ldo7: LDO7 {
261 regulator-name = "ldo7";
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <3300000>;
264 };
265 };
266 };
267
268 eeprom@50 {
269 compatible = "atmel,24c08";
270 reg = <0x50>;
271 pagesize = <16>;
272 };
273
274 rtc_i2c: rtc@69 {
275 compatible = "abracon,ab1805";
276 reg = <0x69>;
277 };
278 };
279
280 &i2c3 {
281 clock-frequency = <100000>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_i2c3>;
284 status = "disabled";
285 };
286
287 &pwm2 {
288 pinctrl-names = "default";
289 pinctrl-0 = <&pinctrl_pwm_backlight>;
290 status = "okay";
291 };
292
293 &sai2 {
294 #sound-dai-cells = <0>;
295 pinctrl-names = "default";
296 pinctrl-0 = <&pinctrl_sai2>;
297 assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
298 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
299 assigned-clock-rates = <49152000>;
300 clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>,
301 <&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
302 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
303 <&clk IMX8MM_AUDIO_PLL2_OUT>;
304 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
305 fsl,sai-asynchronous;
306 status = "okay";
307 };
308
309 &snvs {
310 status = "okay";
311 };
312
313 &snvs_pwrkey {
314 status = "okay";
315 };
316
317 &uart1 {
318 pinctrl-names = "default";
319 pinctrl-0 = <&pinctrl_uart1>;
320 assigned-clocks = <&clk IMX8MM_CLK_UART1>;
321 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
322 status = "disabled";
323 };
324
325 &uart2 {
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_uart2>;
328 assigned-clocks = <&clk IMX8MM_CLK_UART2>;
329 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
330 status = "disabled";
331 };
332
333 &uart3 { /* console */
334 pinctrl-names = "default";
335 pinctrl-0 = <&pinctrl_uart3>;
336 status = "okay";
337 };
338
339 &uart4 { /* bluetooth */
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_uart4>;
342 assigned-clocks = <&clk IMX8MM_CLK_UART4>;
343 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
344 uart-has-rtscts;
345 status = "disabled";
346
347 bluetooth {
348 compatible = "brcm,bcm4330-bt";
349 pinctrl-names = "default";
350 pinctrl-0 = <&pinctrl_bt>;
351 max-speed = <3000000>;
352 device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
353 host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
354 shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
355 };
356 };
357
358 &usbotg1 {
359 dr_mode = "otg";
360 hnp-disable;
361 srp-disable;
362 disable-over-current;
363 status = "disabled";
364 };
365
366 &usbotg2 {
367 dr_mode = "host";
368 hnp-disable;
369 srp-disable;
370 disable-over-current;
371 status = "disabled";
372 };
373
374 &usdhc1 {
375 pinctrl-names = "default", "state_100mhz", "state_200mhz";
376 pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
377 pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
378 pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
379 bus-width = <4>;
380 non-removable;
381 };
382
383 &usdhc2 {
384 pinctrl-names = "default", "state_100mhz", "state_200mhz";
385 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
386 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
387 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
388 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
389 wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
390 no-1-8-v;
391 bus-width = <4>;
392 vmmc-supply = <®_usdhc2_vmmc>;
393 status = "okay";
394 };
395
396 &usdhc3 {
397 pinctrl-names = "default", "state_100mhz", "state_200mhz";
398 pinctrl-0 = <&pinctrl_usdhc3>;
399 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
400 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
401 bus-width = <8>;
402 non-removable;
403 no-1-8-v;
404 status = "okay";
405 };
406
407 &wdog1 {
408 pinctrl-names = "default";
409 pinctrl-0 = <&pinctrl_wdog>;
410 fsl,ext-reset-output;
411 status = "okay";
412 };
413
414 &iomuxc {
415 pinctrl-names = "default";
416 pinctrl-0 = <&pinctrl_hog_1>;
417
418 pinctrl_hog: hoggrp {
419 fsl,pins = <
420 MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19
421 MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x190
422 >;
423 };
424
425 pinctrl_bt: bt0grp {
426 fsl,pins = <
427 MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 /* BT_REG_ON */
428 MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 /* BT_DEV_WU */
429 MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 /* BT_HST_WU */
430 >;
431 };
432
433 pinctrl_fec1: fec1grp {
434 fsl,pins = <
435 MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
436 MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
437 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
438 MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
439 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
440 MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
441 MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
442 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
443 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
444 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
445 MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
446 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
447 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
448 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
449 >;
450 };
451
452 pinctrl_gpio_led: gpioledgrp {
453 fsl,pins = <
454 MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x19
455 >;
456 };
457
458 pinctrl_i2c1: i2c1grp {
459 fsl,pins = <
460 MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
461 MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
462 >;
463 };
464
465 pinctrl_i2c2: i2c2grp {
466 fsl,pins = <
467 MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
468 MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
469 >;
470 };
471
472 pinctrl_i2c3: i2c3grp {
473 fsl,pins = <
474 MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
475 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
476 >;
477 };
478
479 pinctrl_i2c4: i2c4grp {
480 fsl,pins = <
481 MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
482 MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
483 >;
484 };
485
486 pinctrl_pmic: pmicgrp {
487 fsl,pins = <
488 MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
489 >;
490 };
491
492 pinctrl_pwm_backlight: pwmbacklightgrp {
493 fsl,pins = <
494 MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT 0x03
495 >;
496 };
497
498
499 pinctrl_sai2: sai2grp {
500 fsl,pins = <
501 MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6
502 MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
503 MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6
504 MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
505 MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
506 MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
507 >;
508 };
509
510 pinctrl_uart1: uart1grp {
511 fsl,pins = <
512 MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
513 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
514 >;
515 };
516
517 pinctrl_uart2: uart2grp {
518 fsl,pins = <
519 MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
520 MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
521 >;
522 };
523
524 pinctrl_uart3: uart3grp {
525 fsl,pins = <
526 MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
527 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
528 >;
529 };
530
531 pinctrl_uart4: uart4grp {
532 fsl,pins = <
533 MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x140
534 MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x140
535 MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x140
536 MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x140
537 >;
538 };
539
540 pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
541 fsl,pins = <
542 MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41
543 >;
544 };
545
546 pinctrl_usdhc1: usdhc1grp {
547 fsl,pins = <
548 MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
549 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0
550 MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0
551 MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0
552 MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0
553 MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
554 MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0
555 >;
556 };
557
558 pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp {
559 fsl,pins = <
560 MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
561 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
562 MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
563 MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
564 MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
565 MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
566 MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0
567 >;
568 };
569
570 pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp {
571 fsl,pins = <
572 MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
573 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
574 MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
575 MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
576 MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
577 MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
578 MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x1d0
579 >;
580 };
581
582 pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
583 fsl,pins = <
584 MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
585 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
586 MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x00
587 >;
588 };
589
590 pinctrl_usdhc2: usdhc2grp {
591 fsl,pins = <
592 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
593 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
594 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
595 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
596 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
597 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
598 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
599 >;
600 };
601
602 pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp {
603 fsl,pins = <
604 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
605 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
606 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
607 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
608 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
609 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
610 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
611 >;
612 };
613
614 pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp {
615 fsl,pins = <
616 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
617 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
618 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
619 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
620 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
621 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
622 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
623 >;
624 };
625
626 pinctrl_usdhc3: usdhc3grp {
627 fsl,pins = <
628 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
629 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
630 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
631 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
632 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
633 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
634 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
635 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
636 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
637 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
638 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
639 >;
640 };
641
642 pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
643 fsl,pins = <
644 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
645 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
646 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
647 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
648 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
649 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
650 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
651 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
652 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
653 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
654 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
655 >;
656 };
657
658 pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
659 fsl,pins = <
660 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
661 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
662 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
663 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
664 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
665 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
666 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
667 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
668 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
669 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
670 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
671 >;
672 };
673
674 pinctrl_wdog: wdoggrp {
675 fsl,pins = <
676 MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
677 >;
678 };
679 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.