~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm64/freescale/imx8mm-venice-gw73xx.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  * Copyright 2020 Gateworks Corporation
  4  */
  5 
  6 #include <dt-bindings/gpio/gpio.h>
  7 #include <dt-bindings/leds/common.h>
  8 #include <dt-bindings/phy/phy-imx8-pcie.h>
  9 
 10 / {
 11         aliases {
 12                 ethernet1 = &eth1;
 13                 usb0 = &usbotg1;
 14                 usb1 = &usbotg2;
 15         };
 16 
 17         led-controller {
 18                 compatible = "gpio-leds";
 19                 pinctrl-names = "default";
 20                 pinctrl-0 = <&pinctrl_gpio_leds>;
 21 
 22                 led-0 {
 23                         function = LED_FUNCTION_STATUS;
 24                         color = <LED_COLOR_ID_GREEN>;
 25                         gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
 26                         default-state = "on";
 27                         linux,default-trigger = "heartbeat";
 28                 };
 29 
 30                 led-1 {
 31                         function = LED_FUNCTION_STATUS;
 32                         color = <LED_COLOR_ID_RED>;
 33                         gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 34                         default-state = "off";
 35                 };
 36         };
 37 
 38         pcie0_refclk: pcie0-refclk {
 39                 compatible = "fixed-clock";
 40                 #clock-cells = <0>;
 41                 clock-frequency = <100000000>;
 42         };
 43 
 44         pps {
 45                 compatible = "pps-gpio";
 46                 pinctrl-names = "default";
 47                 pinctrl-0 = <&pinctrl_pps>;
 48                 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 49                 status = "okay";
 50         };
 51 
 52         reg_1p8v: regulator-1p8v {
 53                 compatible = "regulator-fixed";
 54                 regulator-name = "1P8V";
 55                 regulator-min-microvolt = <1800000>;
 56                 regulator-max-microvolt = <1800000>;
 57                 regulator-always-on;
 58         };
 59 
 60         reg_3p3v: regulator-3p3v {
 61                 compatible = "regulator-fixed";
 62                 regulator-name = "3P3V";
 63                 regulator-min-microvolt = <3300000>;
 64                 regulator-max-microvolt = <3300000>;
 65                 regulator-always-on;
 66         };
 67 
 68         reg_usb_otg1_vbus: regulator-usb-otg1 {
 69                 pinctrl-names = "default";
 70                 pinctrl-0 = <&pinctrl_reg_usb1_en>;
 71                 compatible = "regulator-fixed";
 72                 regulator-name = "usb_otg1_vbus";
 73                 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 74                 enable-active-high;
 75                 regulator-min-microvolt = <5000000>;
 76                 regulator-max-microvolt = <5000000>;
 77         };
 78 
 79         reg_usb_otg2_vbus: regulator-usb-otg2 {
 80                 pinctrl-names = "default";
 81                 pinctrl-0 = <&pinctrl_reg_usb2_en>;
 82                 compatible = "regulator-fixed";
 83                 regulator-name = "usb_otg2_vbus";
 84                 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 85                 enable-active-high;
 86                 regulator-min-microvolt = <5000000>;
 87                 regulator-max-microvolt = <5000000>;
 88         };
 89 
 90         reg_wifi_en: regulator-wifi-en {
 91                 pinctrl-names = "default";
 92                 pinctrl-0 = <&pinctrl_reg_wl>;
 93                 compatible = "regulator-fixed";
 94                 regulator-name = "wl";
 95                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 96                 startup-delay-us = <100>;
 97                 enable-active-high;
 98                 regulator-min-microvolt = <3300000>;
 99                 regulator-max-microvolt = <3300000>;
100         };
101 };
102 
103 /* off-board header */
104 &ecspi2 {
105         pinctrl-names = "default";
106         pinctrl-0 = <&pinctrl_spi2>;
107         cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
108                    <&gpio1 10 GPIO_ACTIVE_LOW>;
109         status = "okay";
110 
111         tpm@1 {
112                 compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
113                 reg = <0x1>;
114                 spi-max-frequency = <36000000>;
115         };
116 };
117 
118 &gpio1 {
119         gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
120                 "", "", "pci_usb_sel", "dio0",
121                 "", "dio1", "", "", "", "", "", "",
122                 "", "", "", "", "", "", "", "",
123                 "", "", "", "", "", "", "", "";
124 };
125 
126 &gpio4 {
127         gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
128                 "mipi_gpio1", "", "", "pci_wdis#",
129                 "", "", "", "", "", "", "", "",
130                 "", "", "", "", "", "", "", "",
131                 "", "", "", "", "", "", "", "";
132 };
133 
134 &i2c2 {
135         clock-frequency = <400000>;
136         pinctrl-names = "default";
137         pinctrl-0 = <&pinctrl_i2c2>;
138         status = "okay";
139 
140         accelerometer@19 {
141                 pinctrl-names = "default";
142                 pinctrl-0 = <&pinctrl_accel>;
143                 compatible = "st,lis2de12";
144                 reg = <0x19>;
145                 st,drdy-int-pin = <1>;
146                 interrupt-parent = <&gpio4>;
147                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
148         };
149 };
150 
151 /* off-board header */
152 &i2c3 {
153         clock-frequency = <400000>;
154         pinctrl-names = "default";
155         pinctrl-0 = <&pinctrl_i2c3>;
156         status = "okay";
157 };
158 
159 &pcie_phy {
160         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
161         fsl,clkreq-unsupported;
162         clocks = <&pcie0_refclk>;
163         clock-names = "ref";
164         status = "okay";
165 };
166 
167 &pcie0 {
168         pinctrl-names = "default";
169         pinctrl-0 = <&pinctrl_pcie0>;
170         reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
171         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
172                  <&clk IMX8MM_CLK_PCIE1_AUX>;
173         assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
174                           <&clk IMX8MM_CLK_PCIE1_CTRL>;
175         assigned-clock-rates = <10000000>, <250000000>;
176         assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
177                                  <&clk IMX8MM_SYS_PLL2_250M>;
178         status = "okay";
179 
180         pcie@0,0 {
181                 reg = <0x0000 0 0 0 0>;
182                 device_type = "pci";
183                 #address-cells = <3>;
184                 #size-cells = <2>;
185                 ranges;
186 
187                 pcie@0,0 {
188                         reg = <0x0000 0 0 0 0>;
189                         device_type = "pci";
190                         #address-cells = <3>;
191                         #size-cells = <2>;
192                         ranges;
193 
194                         pcie@4,0 {
195                                 reg = <0x2000 0 0 0 0>;
196                                 device_type = "pci";
197                                 #address-cells = <3>;
198                                 #size-cells = <2>;
199                                 ranges;
200 
201                                 eth1: ethernet@0,0 {
202                                         reg = <0x0000 0 0 0 0>;
203                                         #address-cells = <3>;
204                                         #size-cells = <2>;
205                                         ranges;
206 
207                                         local-mac-address = [00 00 00 00 00 00];
208                                 };
209                         };
210                 };
211         };
212 };
213 
214 /* off-board header */
215 &sai3 {
216         pinctrl-names = "default";
217         pinctrl-0 = <&pinctrl_sai3>;
218         assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
219         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
220         assigned-clock-rates = <24576000>;
221         status = "okay";
222 };
223 
224 /* GPS */
225 &uart1 {
226         pinctrl-names = "default";
227         pinctrl-0 = <&pinctrl_uart1>;
228         status = "okay";
229 };
230 
231 /* bluetooth HCI */
232 &uart3 {
233         pinctrl-names = "default";
234         pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
235         cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
236         rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
237         status = "okay";
238 
239         bluetooth {
240                 compatible = "brcm,bcm4330-bt";
241                 shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
242         };
243 };
244 
245 /* RS232 */
246 &uart4 {
247         pinctrl-names = "default";
248         pinctrl-0 = <&pinctrl_uart4>;
249         status = "okay";
250 };
251 
252 &usbotg1 {
253         dr_mode = "otg";
254         over-current-active-low;
255         vbus-supply = <&reg_usb_otg1_vbus>;
256         status = "okay";
257 };
258 
259 &usbotg2 {
260         dr_mode = "host";
261         disable-over-current;
262         vbus-supply = <&reg_usb_otg2_vbus>;
263         status = "okay";
264 };
265 
266 /* SDIO WiFi */
267 &usdhc1 {
268         pinctrl-names = "default";
269         pinctrl-0 = <&pinctrl_usdhc1>;
270         bus-width = <4>;
271         non-removable;
272         vmmc-supply = <&reg_wifi_en>;
273         status = "okay";
274 };
275 
276 /* microSD */
277 &usdhc2 {
278         pinctrl-names = "default", "state_100mhz", "state_200mhz";
279         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
280         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
281         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
282         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
283         bus-width = <4>;
284         vmmc-supply = <&reg_3p3v>;
285         status = "okay";
286 };
287 
288 &iomuxc {
289         pinctrl-names = "default";
290         pinctrl-0 = <&pinctrl_hog>;
291 
292         pinctrl_hog: hoggrp {
293                 fsl,pins = <
294                         MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3         0x40000041 /* PLUG_TEST */
295                         MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6       0x40000041 /* PCI_USBSEL */
296                         MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7        0x40000041 /* PCIE_WDIS# */
297                         MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x40000041 /* DIO0 */
298                         MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9       0x40000041 /* DIO1 */
299                         MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0       0x40000104 /* RS485_TERM */
300                         MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0        0x40000104 /* RS485 */
301                         MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2        0x40000104 /* RS485_HALF */
302                 >;
303         };
304 
305         pinctrl_accel: accelgrp {
306                 fsl,pins = <
307                         MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5        0x159
308                 >;
309         };
310 
311         pinctrl_bten: btengrp {
312                 fsl,pins = <
313                         MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x41
314                 >;
315         };
316 
317         pinctrl_gpio_leds: gpioledgrp {
318                 fsl,pins = <
319                         MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5    0x19
320                         MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4         0x19
321                 >;
322         };
323 
324         pinctrl_i2c3: i2c3grp {
325                 fsl,pins = <
326                         MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c3
327                         MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c3
328                 >;
329         };
330 
331         pinctrl_pcie0: pcie0grp {
332                 fsl,pins = <
333                         MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6        0x41
334                 >;
335         };
336 
337         pinctrl_pps: ppsgrp {
338                 fsl,pins = <
339                         MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15      0x41
340                 >;
341         };
342 
343         pinctrl_reg_wl: regwlgrp {
344                 fsl,pins = <
345                         MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
346                 >;
347         };
348 
349         pinctrl_reg_usb1_en: regusb1grp {
350                 fsl,pins = <
351                         MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12      0x41
352                         MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC     0x41
353                 >;
354         };
355 
356         pinctrl_reg_usb2_en: regusb2grp {
357                 fsl,pins = <
358                         MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8       0x41
359                 >;
360         };
361 
362         pinctrl_sai3: sai3grp {
363                 fsl,pins = <
364                         MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
365                         MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
366                         MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
367                         MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
368                         MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
369                 >;
370         };
371 
372         pinctrl_spi2: spi2grp {
373                 fsl,pins = <
374                         MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0xd6
375                         MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI    0xd6
376                         MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO    0xd6
377                         MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0xd6
378                         MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10      0xd6
379                 >;
380         };
381 
382         pinctrl_uart1: uart1grp {
383                 fsl,pins = <
384                         MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX     0x140
385                         MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX     0x140
386                 >;
387         };
388 
389         pinctrl_uart3: uart3grp {
390                 fsl,pins = <
391                         MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX     0x140
392                         MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX     0x140
393                         MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8      0x140
394                         MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9       0x140
395                 >;
396         };
397 
398         pinctrl_uart4: uart4grp {
399                 fsl,pins = <
400                         MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX     0x140
401                         MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX     0x140
402                 >;
403         };
404 
405         pinctrl_usdhc1: usdhc1grp {
406                 fsl,pins = <
407                         MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x190
408                         MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d0
409                         MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d0
410                         MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d0
411                         MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d0
412                         MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d0
413                 >;
414         };
415 
416         pinctrl_usdhc2: usdhc2grp {
417                 fsl,pins = <
418                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
419                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
420                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
421                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
422                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
423                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
424                 >;
425         };
426 
427         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
428                 fsl,pins = <
429                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
430                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
431                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
432                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
433                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
434                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
435                 >;
436         };
437 
438         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
439                 fsl,pins = <
440                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
441                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
442                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
443                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
444                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
445                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
446                 >;
447         };
448 
449         pinctrl_usdhc2_gpio: usdhc2gpiogrp {
450                 fsl,pins = <
451                         MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0x1c4
452                         MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
453                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
454                 >;
455         };
456 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php